USB drive installation missing in bootcamp

I have a macbook pro mid-2010, currently up to date in all firmware. My disk drive's ability to burn dvd's is apparently shot, so the only alternative to install windows is via usb drive, however that option in bootcamp doesn't even exist. Someone please tell me how to fix this.
thanks,
taylort210

By default, Apple only enables that option if your Mac did not ship with an internal optical drive. Since yours did, the option would not be enables, as Boot Camp will expect you to install from teh optical drive shipped in your machine. If your drive is malfunctioning, you can get it repaired for free under Apple Care (assuming you purchased the extended warranty and the 3 years since date of purchase is not expired). If your Apple Care has expired, you can purchase a replacement drive form OWC for about $80 USD.

Similar Messages

I know that my Apple Mobile Device USB Driver is missing. It won´t reinstall or update the software. Where can I get the software so I can synch my Ipod nano again?

I know that my Apple Mobile Device USB Driver is missing.When i try to reinstall it in the device manager it says that one of the installers is unable to reinstall the software. I don´t know where to look for the software to get the driver going again, so please help if you´ve got any solutions to my problem. I´ve spent hours and hours looking in the internet but i couldnt find anything helpful. PLEASE HELP
PS: I´ve got a Windows 7 PC so the guy from the Apple Store refused to help me

You need to completely uninstall iTunes from your computer and then download and install it again.
You do know that Microsoft has a web site, right?

ITunes doesn't recognize iPhone and Apple Mobile Device USB Driver is missing

Hi. iTunes does not recognize my iPhone when I connect it to my PC via USB. I found iOS: Device not recognized in iTunes for Windows and went through the listed steps to diagnose the problem. The problem seems to be the Apple Mobile Device USB Driver. It is not listed in Device Manager and it does not seem to be installed on my PC. I followed directions for "If the Apple Mobile Device USB Driver is not listed" and I was not able to find anything. In that case there are no further steps that you can take listed on iOS: Device not recognized in iTunes. I then uninstalled and reinstalled iTunes and other software components (http://support.apple.com/kb/ht1923) three times but each time Apple Mobile Device USB Drive was missing. If anyone can advise me I would greatly appreciate it.
iTunes: iTunes 11.1.5 for Windows
iPhone: 4.3.3
PC: Windows 7

See TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
See also Troubleshooting issues with iTunes for Windows updates.
tt2

Apple mobile device USB driver is missing and cannot be installed

Hi,
My iPod nano (6th gen) is not recognised by iTunes but is recognised by Windows sometimes (once in 2-3 attempts).
Every time I connect my iPod to my laptop, a window pops up saying "an iPod is detected but could not be identified properly...".
I looked through apple support page and narrowed down the cause to the driver.
Apple mobile device USB driver does not show up in Device Manager.
However iPod does show up under Portable Devices as a camera when iPod is recognised by Windows.
I tried reinstalling Apple Mobile Device USB Driver as it was shown in the support page (right click on iPod in Device Manager>update driver software>...).
This did not work (gave me an error saying "the folder you specified doesn't contain a compatible software driver for your device...".
So I tried another method I found online; extract iTunes installer (itunes6464setup.exe), extract AppleMobileDeviceSupport6464.msi in it, and use the files in it to update driver.
This gave me the same error.
It seems that a Windows driver is installed for my iPod (WPD FileSystem Volume Driver); when I opt for "search automatically" in Uptade driver software, this driver shows up with the message "the best driver for your device is already installed".
Also, my iPod is shown in Devices and Printers with an exclamation mark (when I connect my iPod to my laptop, the exclamation mark shows up only after I click OK on the message window "an iPod is detected but could not be identified properly...")
Troubleshoot showed "Windows is uninstalling this device (Code 21)".
I'd appreciate it if someone could help with the situation.
I'm using Windows 8.1, iTunes 12.1 for Windows 64bit, and iPod nano 6th gen.
I haven't connected my iPod to my laptop for a long while, but I recall connecting an iPhone to my laptop a while ago and it was recognised just fine.
After that I updated my Windows from 8 to 8.1, but I don't think it has anything to do with the problem as my iPod wasn't recognised by iTunes before and after the update.
Thank you in advance!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases. Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Arch Linux USB drive installER...

Hey all, is there a method to get my 1 GB USB drive to act like an Arch Linux installer? I don't need to install Arch Linux on the USB, just getting it to act like a CD is good enough for me. This is because my computer does not have a CD drive.

Nevermind. I found these:
http://wiki.archlinux.org/index.php/Usb … ch_Install
http://wiki.archlinux.org/index.php/Ins … _USB_stick
Now I have to try them out. I'll report back on how it goes!

Disable USB driver installation from searching Windows Updates for software

Hello,
When a plug-n-play device is connected to a Windows 7 system, the system by default tries to search Windows update for compatible drivers. I have a preconfigured driver store on each system that will have the drivers for all of the USB devices we care
about so I'd like to search the local driver store first before searching for Windows updates.
I found the option that controls this under System Properties > Advanced system settings > Hardware tab > Device Installation Settings. I have set this option before my machines run through sysprep, however, sysprep appears to be resetting
the option back to the Windows default (Yes, do this automatically) and ignores what I set it to.
I have a reg key that I'm running post-sysprep, but I'd like to avoid this as it's an extra step and I don't want to have to account for it long-term. My question is, is there a way to set this option in my sysprep unattend file?

If this is a domain joined machine, this can be set by a Group Policy Object;
Open Group Policy Management Editor.
In the navigation pane, open Computer Configuration\Administrative Templates\System\Internet Communication Management\Internet
Communication settings.
In the details pane, double-click Turn off Windows Update device driver searching.
Do one of the following:
To turn off searching Windows Update, click Enabled.
To allow searching Windows Update, click Disabled.
Click OK to save your settings.
Instructions taken from: http://technet.microsoft.com/en-us/library/cc730606(v=ws.10).aspx
If this PC is not on the domain (but is Pro) you may be able to set the same option on the Local Group Policy (GPEDIT.MSC).
Kind Regards
Barry

How can I fix Intel 5 series/3400 USB driver installation problem?

I am using Boot Camp to install Windows 7 64 bit on an iMac (mid 2010). After Windows and Apple Windows drivers are installed, I get an error message about the Intel 5 series/3400 Series Chipset Family USB Universal Host controller 3B3B failing to install. Reinstalling the driver does not work. I get the yellow triangle with the exclamation mark on the computer icon in the list of devices, indicating there is a problem.
I searched for this problem on the Apple website. I found info about this exact issue with the MacBook Pro, (mid 2010), Windows 7 64 bit and Boot Camp. The article said to ignore it, that this wouldn't be a problem. Would this also not be a problem for my iMac?
Any comments or suggestions?
thanks, Kevin

Have you done:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
What results do you get when you run this:
iTunes for Windows: Device Sync Tests
Do both the Home button and Power button work OK normally?

USB drive icons missing

When I plug a USB flash drive into my MacBook Air hte only way O ca access it is through the find function. The icon for the flash drive does not appear on the desktop. This is a recent dvelopment and I cannot think of anything I did to start his condition.
Any suggestions?
MacBook Air
OSX 10.7.5

GOTO > Finder.....PREFERNCES......click on the GENERAL tab, the click the box marked HARD DISKS and also the box marked EXTERNAL DISKS

Hauwei E156B Mobile Broadband USB Driver/Installation File

Hello folks,
I just recently purchase a USB Keyfob for Mobile Broadband. The model number is E156B and it is manufactured by Huawei. I have search up and down Huawei's support forms and downloading multiple software bundles to no avail. I don't think Huawei even supports Mac OSX 106. Snow Leopard. In any case, I figure I would try one last time here to see if someone has successfully configured the E156B through "Tigo" with OS 10.6.2

I used a Huawei E169 Mobile Broadband Modem using a generic 3G Modem setup under Mac OS X 10.6.3.
This is how I set up the modem:
Open System Preferences window (from Apple menu)
Open the Network Preference Pane.
Select the Huawei xxx Modem item from the list of network connections (there were two more Huawei items)
Click on "Advanced" settings.
Select "Generic" as Modem Manufacturer.
Select the 3G Modem type.
enter the provider specific dial number (*99# in my case)
enter the provider specific ID and password (left blank in my case)
enter provider specific APN (in my case "Internet")
you need to check your providers specific settings for the above!
Click on OK button.
Activate Network setting
Choose to select modem in menue bar
Close System Preferences Window...
To connect, go to the menu bar, click on the handset icon and choose to connect.
After use, disconnect as above (depending on your contract, time charges might apply)
Good Luck

Can't boot from windows 7 install usb drive created in bootcamp

So, my real problem is that my Windows 7 install won't boot after I installed some windows updates. I'm using OSX Lion and the latest version of Bootcamp. I've had Windows installed on my mid 2011 mac mini for only about a day. It had been working flawlessly so far.
Windows automatically downloaded and installed some updates and now it is broken.
When I attempt to boot windows I get a black screen that just hangs forever. No windows logo, no blinking cursor, no nothing.
I thought I could use my Windows 7 Install usb drive to maybe try and do a recovery or repair install but now my USB drive wont boot either. I get the same black screen.
Any ideas on why I can't boot even the install usb drive?
Note: this is the same USB drive I used to install windows the first time so it's definately capable. I've even used my install iso to re-create the usb drive installer and still nothing.

Install ISO means you burned DVD installer and did you reduce burn speed? otherwise it is a bad install.
3rd party updates? for security suite? stick to MS Security Essentials instead.

Multiple USB Device Driver Installations Failing

Windows 7 64 Bit / MSI P965 Platinum Mother Board
I have three USB driver installations failing. I believe this is related to ' USB', because installations of other software unrelated to USB devices install just fine. Might it be a Windows Installer Service, appears to be running fine?
Failing Device Driver Installations;
1) IOGEAR USB 3 PCIe card
Problem: The installer runs part way through the "Preparing to install' process and goes into limbo. I have tried three USB cards by different manufacturers and get the same problem. Tried several Renesas installers, all failed.
Microsoft Windows Installer says: 'Stopped working. Files that help describe the problem: AppCompat.txt, WERInternalMetadata.xml, WERDataCollection failure'.
2) APC Battery Backup 'PowerChute' Software
Problem: : The installer runs part way through the "Preparing to install' process and goes into limbo -or- I get an error message telling me to check the USB connection. APC cable is pulgged into a native port, not a hub. APC has no solution.
3) Logitech Harmony One Remote Software (Finally installed in 'Safe' Mode
Error: : The installer runs part way through the "Preparing to install' process and goes into limbo, but, when I went into 'Safe Mode' the software installed properly. Installation of the other two examples yield the Windows 'can't be installed in safe mode'
Help Appreciated - IM

To rule out a Windows problem, have you tested with a fresh parallel installation?

HT3986 my new macbook pro doesn't detect usb driver

During Bootcamp installation, MBP doesn't detect USB driver before/after finishing virus scan checking.
system finder has USB driver directory as the below snapshot, but "NO USB Drive" warning continuously.

During Bootcamp installation, MBP doesn't detect USB driver before/after finishing virus scan checking.
system finder has USB driver directory as the below snapshot, but "NO USB Drive" warning continuously.

URG-04lx USB driver problem

Hello sorry if the topic is seems a bit not related, but later i will need to connect to Labview, so this step is really essential to me.
First of all,i want to ask did anyone use the Hokuyo urg-04lx laser range finder? The case is that the company is giving me the download link for the usb driver installation, however it was came out as .inf file, so i cant install or register to the computer. http://www.hokuyo-aut.jp/02sensor/07scanner/download/index.html
Another matter is that the Hokuyo urg-04lx i was intended to connect are not detected by laptop at the very instance, for giving example, the USB keyboard and USB mouse will be able to install driver for itself and later the computer will allow to communicate with them. However in this case the Urg-04lx is not giving any synpton as above. I was advice that i should install the USB driver for the Hokuyo urg-04lx first before i continue for the USB connection, however i was unable to install as i stated above.
I wish for anyone who could help me or any advice regarding this product. I am current using window 7 64 bit. Any advice is much appreciated, and if the topic is not related please notify me so i will shift to the recommended category.
Really thank you!!! =)

Your problem isn't related to any NI hardware or software. If you have a problem installing the inf file, then you really need to contact the vendor with details on what happens when you attempt the install. The readme says the inf file is compatible with windows 7 so you need to be a bit more specific about your comment about 'cant install or register to the computer'. Pretty pointless for anyone here to try to duplicate the problem unless they have the same device.

While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation. Please help what to do ??

While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation m not able to install windows on my mac . Please help what to do ??

What DVD drive are you using?

HT4407 When installing Windows 7 using Bootcamp, I get message: "Need 64-bit Windows Installation USB drive or DVD." I thought my install disk was for 32 or 64 bit. What does this mean?

When Installing Windows 7 using Bootcamp, I get message: "Need 64 bit Windows installation USB drive or DVD." What does this mean?

It means you need the 64 bit Version of Windows on a USB stick or DVD.

USB drive installation missing in bootcamp

Similar Messages

Maybe you are looking for