USB driver for 2wie screws up everytime i boot into os 9.2.2

Ok. I have a 2wire ethernet router which i used to get online now since the ethernet port decided to take a dump after an electrical storm. I have it connected via usb which i had to install some drivers to get it to work. When i play warcraft 3, which i have to log into os9 to do *my computers too slow to play it in x* everytime i log back into osx the light for the local network is off, which is on when in normal use in osx. The USB part of the system profiler still recognizes the 2wire modem but that light will not come and the network preferences will not show the e1 port like normal. I installed the drivers again, restarted..plugged the modem back in after turning it off, and still nothing happened. I tried this several times, restarting, loading the drivers..shutting down and restarting nothing. I then reset the PMU with the button on the back and it showed up. Any thoughts why it did this? I guess the trick was the PMU button, or it was just a coincidence. If thats all it is thats easy. I would try again but i am afraid to mess with it! lol

Lombard man,
When you say you log into 9.x to play the game, then log back into OSX for all of your other uses, do you mean you restart the computer so it boots into 9.x, then reboot into OSX or do you start up Classic while still booted in OSX? Log in/out is a function performed when running OSX.
I am guessing you restart the computer so 9.x is the booted OS.
The problem you are having is not normal; I can boot into both 9.x and 10.x on the same powerbook and still maintain my Ethernet connection to my ADSL modem. I would resist resetting the power manager all the time until this is resolved.
I will mention this: My brother has a Comcast DSL modem in Florida; if he is using his powerbook with OSX and I wish to use the one connection the modem has, he disconnects his Ethernet cable and I connect mine, but I get no connection. The solution in this case is to turn off the modem for 10-30 seconds, then turn it back on...my connection then pops up. Apparently the modem has detected a change in software and/or hardware and requires a reset. I would try this approach and see if it works.

Similar Messages

Is it possible to have two USB drives for the IPad? I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive. One of my cameras does not use an SD card. How can I do this?

Is it possible to have two USB drives for the IPad? I want to bring RAW files from my camera through the IPad and out to an external hard drive. One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line. Realted to this, I bought the IPad camera accessory. Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive? Can I put Lightroom or the Nikon photo editing software on the IPad? Right now I carry a PC laptop and external hard drives with me on wildernes trips. Internet and WiFi are not available. Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad). I have Nikon NX software and lightroom on my PC. I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips. Is this possible and how would I do it? I'd appreciate any guidance.

No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

iTunes only syncs to Apple devices.
Assuming the media is not DRM protected, any of the media can be dragged and dropped from iTunes onto other drives (external, flash, etc) as the user chooses.

I am confused by the installation step that requires you to create a bootable USB drive for windows installation. What is the ISO image and why has it selected my Passport backup drive as the destination disc?

In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation. To do so, I must choose an ISO image. What is that? When I click "choose" I don't understand the options presented. Is this the destination of the partition or where Windows will reside on the Mac? Why does it also indicate the the destination disk si my WD Passport Back up drive?

OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive). I also have the discs for both 64bit and 32bit Windows along with the product key. I am still not sure what to do when faced with the options after "choose".

Where can i download a usb driver for my revere 3 (model

I have been trying to download a usb driver for my new revere 3 so I can connect with my 8.1 windows laptop. anyone have an idea where I can find it? The LG site doesn't list any drivers for it

Mac 101: Printing (OS X Lion)
Important:
Your OS X Lion system will either have the necessary printing software already installed, or it will automatically download and install software when the printer is connected or configured. Do not install software that came with the printer as it may be out of date, and do not connect the printer to your Mac yet. Follow the instructions that came with the printer to unpack, install ink or toner, and insert paper. Finally, use the instructions in this article to connect the printer to your Mac.
The procedures are identical for Mountain Lion.

I want to make a bootable usb drive for my macbook air,and my ystem is osx mountain lion 10.8.5. How can i download it again without repaying for it so i can make my bootable flashdrive? I'm pretty new at this computer stuff so i don't know how things

I want to make a bootable usb drive for my macbook air,and my system is osx mountain lion 10.8.5. How can i download it again without repaying for it so i can make my bootable flashdrive? I'm pretty new at this computer stuff so i don't know how things work.
Message was edited by: tzaphon

This is not difficult and you will not have to download from the app store.
your computer has what is called a recovery partition that came with it.
simply hold cmd+R while you boot up. let go a second after you hear the chime.
you will boot into the recovery partition.
Use disk utlity to format your usb drive and then exit Disk utlity and go to Reinstall Mountain Lion.
it will ask you which disk you want to install ML onto. Choose your new USB drive.
easy peasy

Musicord Cherub MRD-41 Recorder: USB-Driver for Mac

Hello,
I am searching for the USB-Driver for Musicord Cherub MRD-41 Recorder. Searching for it along the internet did not give any matching result.
Originally a CD containing the USB-Driver for Windows was included with the product. Since we now work with Apple-Products this does no longer work. Connecting the device to a Mac (as it is normal these days) and hoping, that it will work without any additional Software does not give any result.
On the Original-CD the manufacturer states, that the USB-Driver for Mac can be downloaded at www.apple.com but there nothing can be found anymore.
The recorder has been bought about 6 years ago (used under Windows then). Now we would like to use it again under Mac-systems (10.6 and 10.7).
Does anyone know, if, and where help can be found?
Thank you very much

If it uses MIDI, Garageband can often read it.

HT201269 how to download apple usb driver for windows 7 32 bit

how to download apple usb driver for windows 7 32 bit

Try this:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Then install this:
http://support.apple.com/kb/dl1614
Windows XP Service Pack 2 or later
32-bit editions of Windows Vista or 32-bit editions of Windows 7, and Windows 8

How to install USB driver for Windows?

I'm trying to connect my LG VS980 phone to a Windows XP computer. I'm having difficulty installing the USB driver.
After following several false trails, I found what I think is the right file: on a "Product Support" page which says it's for a "G2 Verizon VS980," there's a button labeled, "Install the USB DRIVER / USB DRIVER for Windows / DOWNLOAD." I clicked the button and downloaded a file 8 MB file. Its name is LG. Not LG.exe or LG.msi or LG.zip. Just LG.
When I double click the file, Windows quite reasonably asks me what program to use to run it. I don't know what program to use any more than Windows does.
There's a link labeled "Instructions... LG G2 VS980 SOFTWARE UPDATE below the download button. When I click it, it loads instructions for installing software on the phone.
Can anyone make sense of this for me?

Orthoducks wrote:
I'll so my best to answer the questions.
>...what you're looking to do a transfer with...?
Initially I want to download pictures taken with the phone's camera. I've considered other uses for a USB connection that I can explore once it's working. I'm puzzled by the question, though. Why should the type of data I want to transfer affect the fact that I can't find an installable driver? I wonder whether my question means the same thing to you as it does to me.
Because photos and music are the basic media people want to transfer between their phones and computers. (Computers in this sense are laptops, desktops, note books etc.) So the question to you was valid.
>Also, have you tried any other computers?
No. Again, I'm puzzled. What difference would another computer make? Would I be able to find a download from one computer that I can't find from another? (Only by blind chance.) Might another computer be able to execute or load a file with no filetype? (Only if it has magical powers.)
Different computers may work where the computer you own evidently does not work. It is good to check the connection of the device to another computer to rule that out. I will answer the obvious of different operating systems and how they function.
>And which software version if your phone currently running?
That question makes sense. Unfortunately I can't answer it. I've looked up how to find the version number, and the instructions tell me to select an "About phone" item in the Settings menu, which doesn't exist.
Doesn't exist? open the Settings Menu go all the way to the bottom (scroll down) the last entry is "ABOUT PHONE" click it. It will give hardware and software versions operating system number etc. Its there trust me. My wife just bought this phone and loves it.
>Often times, the device drivers you're prompted to install are supported solely by the computer's software.
I'm not sure what you're saying here. Taken at face value, it's a trivial and obvious: any driver that one installs on any computing device is supported solely by (i.e., depends on) the device's software. But how does that relate to the question about the version of Android? Android runs on the phone; the driver has to run on the computer.
You stated you are using an older Windows XP computer, I can tell you I hooked my wife's phone to our Windows 8.1 computer and no drivers were necessary. It came up with an option on the phone screen and I chose USB Mass Storage for the connection. This option is also in the phones settings. Read the manual it has loads of information form you to use.
The device had a drive letter assigned and it was labeled LG-Network and once you double click it the folders for music, photos, etc. are all there. Via using windows manager you can simply do a copy and paste to and from the different folders and drives with ease.
Good Luck

Cisco USB Driver for Microsoft Windows 7 PC?

Hello All,
I want a USB Driver for the USB Console cable which came up with Cisco Router.
Note that this USB Console cable has both the sides USB ports ( 1 side of the port goes to USB Console Port of Router and other side goes to USB port of your Laptop)
I searched on cisco.com.
Found the below link:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6880_x/hardware/installation/guide/b_c6880-X_hig/b_c6880-X_hig_appendix_01001.pdf
However, when I go to download link, it appears as "Page Not Found"
I want to try this option and connect my Laptop's HyperTerminal to Router's USB Console.
Does anyone know the USB driver for this?
Thanks
Chinar

Hi Chinar-
It looks like this will work with Windows 7.
http://software.cisco.com/download/release.html?mdfid=282867574&softwareid=282855122&release=3.1
DJ

HT1478 How do I download my iTunes music library onto an external USB drive for back up purposes?

I have an external USB drive plugge into my computer. I want to download my iTunes music library onto the USB drive for back up purposes.
Can't find a method on the iTunes menu. Help.

See here: iTunes: Back up your iTunes library by copying to an external hard drive
B-rock

I want to install Win7 on my new iMac using bootcamp. I got a USB drive for the win7 install-disc, but I don't own a cd for the Mac OS (since it was preinstalled when I got it). I read somewhere that I need a mac OS disc as well?

I want to install Win7 on my new iMac using bootcamp. I got a USB drive for the win7 install-disc, but I don't own a cd for the Mac OS (since it was preinstalled when I got it). I read somewhere that I need a mac OS disc as well to complete the bootcamp installation of Win7 ?
I need some recomendations plz.

Hello,
you don't need OS X install-disk, but I strongly recomend to burn a Win 7 disk. You may have some problems with installing it from a USB Flash :)
Cheers!

Can I use same USB drive for Intel and PPC backup?

Hi, I have a USB hdd that was used for TV recording but failed on that so I reformatted it as Mac OS extended journaled with 6 partitions (GUID), and using SuperDuper, cloned Lion from a Macbook Air and Tiger from my eMac into different partitions, with the idea of using it as an extra backup.
Tested the USB drive on Disk Utility verify disk function and it said all 6 partitions appear OK. Can boot the MBA from the USB drive (although slow) but the eMac does not show the disk image on the USB drive as an optional restart item. I have eMac backed up on a separate Firewire drive but would like to use the USB drive as a second line of defense.
My question is, would I be able to restore from the Tiger dmg on the USB drive, given that it is GUID and not Apple partition scheme. Would I have to reformat it to Apple partition scheme. Also, how would you go about a restore from the USB drive if the eMac's OS was kaput?

You can't store a clone of an Intel-based Mac and a clone of a PowerPC-based Mac on the same drive.
That's because an Intel-based Mac can start from a GUID partition table, but a PowerPC-based Mac can only start if your USB drive is using Apple Partition Map instead of GUID. In your case, you have to buy another external drive to make a clone of the PowerPC-based Mac or the Intel-based Mac.
To change the partition map of your USB drive:
1. Open Disk Utility (it's in Applications > Utilities folder), and select your USB drive in the sidebar.
2. Go to Partition tab, and press "Options" button, where you can choose the partition map you want: GUID, MBR or Apple Partition Map. Note that you won't be able to start an Intel-based Mac from a drive that uses Apple Partition Map

I want to create a USB drive for Mountain Lion and have no discs

I have a nice shiny new 27: iMac and was hoping to create a USB boot drive in case I need it. The iMac does not come with a disk drive and Mountain Lion is purchased via the App Store, so there are no disks with which to build the boot drive. I tried downloading Mountain Lion again from the App Store, but it tells me Mountain Lion is not compatible with this computer. (yes, the computer that is running Mountain Lion right now)
iTunes Support is not very helpful. They keep telling me that I can't make a boot drive and are unable to help me download if from the App Store.
Surely Apple has created a way to build a boot drive in the case of emergency. There will be no way to defrag my hard drive if I am unable to boot from the USB drive.

You have one on your iMac, the recovery partition. Your iMac is not compatible with the App Store version so don't try.
Install OSX on to a thumb drive if you want, it's a waste of time compared to using Recovery.
Click this link for a Google search for 3rd party suggestions.

Do I have to update restore usb drive for every 10.7.x?

Hello, my Mac is playing up and I've decided to reinstall OS X Lion.
When Lion came out I created a USB drive (10.7.0) as per the instructions. Now I need to use the USB stick, whether I press the Option key on boot or look for it In Preferences/Startup Disk, the USB does not show.
What I will say is that when 10.7.1, 2 etc were released I didn't upgrade the USB stick. Is that why?
Thanks for your time
Pete

mende1, thanks so much, it worked. Re-installing as we speak.
I have to say I'm not quite sure why it would not see the USB but next time I will study the OS X start up key options in more detail!
Cheers

USB driver for 2wie screws up everytime i boot into os 9.2.2

Similar Messages

Maybe you are looking for