Usb driver for HP ENVY 15-3040nr Notebook PC for win 7

Hi,
Where can i download thge drivers for the usb for HP ENVY 15-3040nr Notebook PC for win 7.
All 3 ports are acting up, 2 are just not recognising devices.
Is there a way to replace the hardware if needed?
Thanks in advance,

You can find all the drivers here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5218​...
also
Try installing HP Support Assistant which will automatically download and install drivers/updates:
HPSA Link: 
http://www8.hp.com/us/en/campaigns/hpsupportassist​ant/hpsupport.html
If this dosnt help then refer:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c01893385
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • Ralink bluetooth adapter and wifi driver missing for HP ENVY 15-j101ex Notebook PC (ENERGY STAR)

    hello theres a problem connecting my laptop with any wifi networks for a long time now. the problem comes and goes. i cant connect it with any available networks or cant detect them at times. i would like to re-install the ralink bluetooth adapter and wifi driver as i had uninstalled them. where can i get it? please help me out. its been missing for weeks now. also i cant transfer or receive any files because the ralink bluetooth adapter is missing. kindly reply asap. thank you so much.

    Hi  ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your  HP ENVY 15-j101ex Notebook and issues with the  Wireless drivers. Here is a link to your driver page.  Here is a link for troubleshooting the Wireless connection. I would use the section on The Windows 8 Network and Internet Troubleshooter. Here is a link that will show you how to connect a Bluetooth device to your Notebook.  Hope this helps you connect. Thanks.

  • What type of hdd caddy should i buy for Envy 15 3040nr notebook?

    Hi everyone,
    I'm considering to replace my optical drive with a ssd in my Envy 15 3040nr. Since I don't have much expeience it would be nice if somebody can share his on this subject. What I need is full specs on the caddy I should buy along with the measures.
    Thanks!
    This question was solved.
    View Solution.

    Some Envy 15 models came with second bay inside aleady but need reference your model against the service manual downloadable from hp at the support link on this site.
    If you don't have model with second drive bay then indeed a caddy for optical bay is easy option.
    Your optical bay is 9.5mm Sata interface & they are inustry standard so simple to buy.
    Example in link below >
    http://www.ebay.com/itm/Universal-9-5mm-2-5-SATA-2nd-HDD-Hard-Driver-Caddy-For-CD-DVD-Optical-Bay-/2...
    Like my post? Click Kudos (thumb+) to show appreciation.

  • Windows 10 support for HP Envy 15-3040nr?

    Hi,
    I have an HP Envy 15-3040nr that is currently running on Windows 7 x64. I was wondering if this computer would be receiving future driver support for Windows 10 when it releases, and whether or not it supports the Technical Preview that is currently avilable to developers under Microsoft's prerelease program. I currently do not have UEFI enabled (which I know is available for my notebook).
    This questions arises from the fact that I have read on this forum that multiple owners of the Envy 15 were not able to get drivers working on Windows 8.1, for which HP hasn't formally released drivers for. Will HP make me use Windows 8 drivers on Windows 10?
    Thanks,
    -VivXGamer

    @VivXGamer 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • The fingerprint reader for HP ENVY dv6-7204se Notebook PC stopped working

    I have HP Notebook PC with these spesifications:
    HP ENVY dv6-7204se Notebook PC Product Specifications
    The fingerprint reader has stopped working and when I check the biometric device in control panel I got this message: "
    Windows did not find any biometric devices on this computer. You might need to attach your device of install device drivers".
    I tried to fix this problem by going to this link Locate your product to get support
    I did not get any results and it says that "We were unable to determine your specific product".  I also tried
    Automatically find your products and solutions, but again I get this message "0 HP products were discovered"
    why I can't find support for HP ENVY dv6-7204se
    I need your help in fixing the fingerprint reader ... thank you

    Hello
    I was unable to find the drivers searching with your product and model number as well.
    I was able to keep searching and found this link and it was under our business site support. This is the drivers for your unit series and you should be able to download the fingerprint reader drivers from the link.
    Let me know if this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Do I have a solid state drive for Hp Envy DV7 7273ca notebook?

    I have an hp envy dv7 7273CA Windows 8.1 notebook and i was wondering becuse the box said it came with a ssd i dont have the box anymore
    I have three drives os c:  Recovery d:   and data e: I was wondering if data e is the ssd its 29.6 gigs.
    when i go to properties they all say the same thing local disk ntfs. when i go to properties than hardware i see 2 drives besisdes my dvd drive  one is a samsung  and the other is a WDC WD10 bunch of numbers and letters. PLEASE HELP this is rather annoying trying to figure out thx.

    xanadu_poppy
    i mean 29.6 gigs MLC, normal is the Recovery on the MLC, i don't mean your samsung SSD
    normal is dual hard drive configurations  with out 1.8" mlc drive
    Page 73 http://h10032.www1.hp.com/ctg/Manual/c03591253.pdf
    new Intel Rapid Storage Technology  driver
    Say thanks by clicking the "Kudos! Star" which is on the left.
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • HP Envy m6-1203ex notebook Drivers for windows7 (32 Bit)

    I have downgraee my laptop hp Envy m6-1203ex from Win8 to Windows7 (32Bit), I already installed successfully Win7 (32Bit), I need hardware drivers for windows7 (32Bit), I checked on google but did not get it. Please advise accordingly.
    This question was solved.
    View Solution.

    Hi:
    There is no W7 32 bit switchable graphics driver for that configuration from anywhere.
    Your only choice if you want to succesfully run W7, is to install W7 x64, and then you can use the drivers and software from the m6t-1000 except the BIOS and firmware files.
    http://support.hp.com/us-en/product/HP-Pavilion-m6​-1000-Entertainment-Notebook-PC-series/5259226/mod​...

  • Can you connect a USB drive to Airport Extreme or an Airport base for TM

    Would like to backup MacBooks in 2 different scenarios with Time Machine. One is a USB external drive attached to Airport Extreme and the other is doing the same with an Airport base. Will both work? Also, I have been partitioning the direct USB attached hard drives so that I have a Time Machine partion and a copy of the internal hard drive. This allows my kids to boot from the external drive and still work in case the internal drive has failed or becomes corrupted. So far we have experienced 3 internal drive failures, one during finals and this has saved them. Can you boot from an external drive copy of the internal drive if it is connected to either an Airport Extreme or Airport base?

    I am confused as on another site I saw that the Time Machine backup to Airport Extreme was working than broken by an update in 2008, then fixed again by another update in Oct. 2008. So is it officially supported or not. I cannot say that I am impressed with Apple's documentation and updates to what is supported and what is not.
    Kappy, I do not see the concern with partitioning a drive and then taking backups to one partition and having a Restore created copy of the hard drive in another. The drive is partitioned and that should keep one partition from overlaying the other. The windows world had used partioning successfully for many years. Apple does have a slick ability to boot from a copy of the OS which is on an external drive. It has saved my kids multiple times when something has gotten hosed up on the internal drive, including a Mac mini with a drive failure during dinal exams and two drive failures on a Macbook. It lets the kids access the internet and get theri work done albiet with a static copy of the OS taken some time in the past. My son was even able to copy to the external drive all of his documents, music and photos off the internal drive that would not boot. Of course he had not learned the value of Time Machine at that point.

  • HP Envy 15 3040nr Low Framerates while Gaming

    Hi,
    I have an HP Envy 15 3040nr notebook with an AMD Radeon 7690M dedicated GPU with 1GB of GDDR5 memory. Although I acknowledge that the use of this GPU on my notebook was not intended primarily for gaming, I've read reviews online stating that this is a good GPU for playing most graphical games at a Medium or Medium-Low setting.
    However, while playing games like Need for Speed Most Wanted 2012, Assassin's Creed 3, Crysis 3, and BeamNG.Drive, I get horrible framerates ranging from 15-25 FPS. I think the expected FPS lies somewhere in the 30-35 range for such games, and these aren't even the most recent of 3D games.
    Also, I don't believe the problem is CPU related because this model is equipped with an Intel i7-2670QM Quad Core, which overclocks to around 3.0 GHz when I'm running games through Turbo Boost. I have yet to run graphical benchmarks, which I will do.
    Any advice on what to do would be greatly appreciated.

    Thanks for the prompt reply WeiH.
    Sadly there doesn't seem to be an HP Service Center in my country (Sri Lanka). So now I'm really confused as to what my retailer's technicians meant by "we'll send it to the local HP Support Center and have your display panel replaced".
    Whatever they did, the display panel has been replaced and I've been using it for less than a week so far with no issues. The touchpad hasn't really been heating up and has in fact been as warm as the rest of the notebook. Perhaps it's because I have now turned on the option of disabling the touchpad whenever an external cursor device is attached (since I primarily always use a mouse).
    Needless to say, since we both have no clue as to how the touchpad overheated and damaged the screen (in the exact position and measurement as the touchpad) I feel like it's just a matter of time before it happens again.
    Obviously I understand that there's little you can do on your side other than direct me to an HP Support Center. However I hope my worries are justified as I feel that as a consumer I shouldn't have to worry about my brand new product malfunctioning by no fault of my own. 

  • ENVY 15 - 3040NR Brightness Adjust Problem After upgrade to Windows 8

    I agree removing windows 8 is not a viable solution.  Also, the Windows 8 drivers have been released and they still don't fix the problem.

    Hi, I also have a HP Envy 15-3040nr and cannot for the life of me get the brightness to adjust at all. I'm using the most recent drivers from dec 10, 2012 still nothing. It's bad enough you lock us out of advanced bios settings as far as clock and bus speeds go, but then you make us have to go through your website to get drivers that's already out of date on debut. No one pays $1200 for a laptop with dedicated graphics and expects to be unable to reduce brightness. Over the course of the time I have had this laptop and has released well over 10 updates yet your engineers have only produced 3 hp certified driver and 2 were based of the same build. What are you guys doing wrong that Asus, Lenovo, even dell can get this kind of thing right. We need real solutions for the amount of money involved not half-assed responses like " uninstall windows 8 and go back to windows 7 " . There has to be a engineer that actually cares enough to fix this !

  • After updating to iTunes 12  the Apple Mobile Device USB Driver is not listed, I use Windows 8.1, how can i solve this?

    After I updates ITunes to the latest version (12), ITunes wont find my iphone and Ipad anymore, after searching I found that the Apple Mobile Device USB Driver is not listed anymore, on the support website of Apple it doesnt explain how to solve this,.
    I use Windows 8.1 and so now also ITunes 12, both my Iphone 4S and Ipad Air have the latest IOS version.
    I hope anybody can tell me how to solve this that the Apple Mobile Device USB Driver is back, thank you

    Found a possible solution for me.
    While the phone was plugged into my computer and iTunes is CLOSED.
    1. I went to Services in Windows.
    2. I selected Apple Mobile Device and right clicked and selected "Stop".
    3. Then I right-clicked again and selected "Start".
    4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall".  You will get a warning about uninstalling the device.  Click OK.
    5.  At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
    This re-installed the iPhone and everything started working again.

  • External USB drive won't mount after 10.9.5 upgrade

    Is anyone else reporting the following issue?  Immediately after installing OS X update 10.9.5 (13F34) on 09/18, my external USB drive (IOMega 1GB OS X Extended FS) used for Time Machine would no longer mount and isn't recognized.  When I look at the drives in finder, it is missing.  However, it does show up under the USB Hi-Speed Bus device tree:
    USB Mass Storage:
      Product ID:    0x0376
      Vendor ID:    0x059b  (Iomega Corporation)
      Version:     0.00
      Serial Number:    ABCDEF012314E2ED
      Speed:    Up to 480 Mb/sec
      Manufacturer:    Iomega
      Location ID:    0x1a120000 / 3
      Current Available (mA):    500
      Current Required (mA):    0
    Console message when device plugged in:
    10/6/14 3:22:31.000 AM kernel[0]: USBMSC Identifier (non-unique): ABCDEF012314E2ED 0x59b 0x376 0x0, 2
    mount command results:
    devfs on /dev (devfs, local, nobrowse)
    map -hosts on /net (autofs, nosuid, automounted, nobrowse)
    map auto_home on /home (autofs, automounted, nobrowse)
    /dev/disk1s2 on /Volumes/Mac-Mini 2 (hfs, local, nodev, nosuid, noowners)
    System is Mac-Mini (late 2012), 2.5 Ghz i5, 8GB ram, 500GB local storage, 1TB on second Firewire disk for media, 1TB USB disk for Firewire (PROBLEM)
    I have reinstalled the combined 10.9.5 OS upgrade, and verified that the drive works when connected to my other MB Pro (mid-2012 running Yosemite beta 3).  There is no third party software that I'm aware of in use for this drive, as it's only for Time Machine backups.
    Thanks

    Is the drive's icon on the desktop (perhaps behind another icon, which is possible if Finder > View > Cleanup is enabled)?
    If not, is the box Finder > Preferences > General > External Disks checked?
    Is the drive listed in every Finder window's sidebar?
    If not, is the box Finder > Preferences > Sidebar > External Disks checked?
    Are Time Machine backups to the drive happening on schedule?
    If not, does the drive appear in System Preferences > Time Machine > Select Disk?
    Can you open /Volumes/Mac-Mini 2/Backups.backupdb using Finder > Go > Go to Folder...?
    Does the drive appear in Disk Utility? Is it (or can it be) mounted there?
    Have you tried to plug it in to a USB port on the Mini (not a hub) or into a different USB port on the Mini?
    Have you tried this: shut down; unplug the drive; boot the Mac; after you have logged in and the Finder is done populating the desktop and menu bar, plug the drive in?

  • Apple mobile device USB Driver won't install (Code 37) on my 7th Generation iPod Nano

    As a result, iTunes won't detect my iPod. But the iPod will charge when I plug it in to my comp, and there is an iPod folder in "My Computer". But after installing iTunes, it no longer says “connected” on the iPod (even though it still charges it). And, in Device manager, there is a yellow exclamation mark that appears in the DVD/CD-ROM drive directly after installing iTunes – there is also a yellow mark next to “Apple mobile device USB Driver” when my iPod is plugged in. For both, it says “Code 37.” I know how to fix the DVD/CD-ROM drive problem (by deleting the filters) but the Apple driver still won't install after that. I've tried troubling shooting this. I uninstalled and reinstalled the drivers, but it hasn't made a difference. And I've uninstalled and reinstalled iTunes multiple times, too, and every time I reinstall iTunes the same thing happens: my iPod no longer says “connected on the screen,” and the  DVD/CD-ROM drive gets code 37 again. Also, I tried different USB cables/ports.
    Any help of suggestions would be greatly appreciated. And I think I've already read a lot of troubleshooting guides on this site, but haven't had any success so far.

    Sorry, I'm confused. What do you mean by “leaving all other USB devices disconnected”? Does that include my mouse, keyboard, etc? And does that mean I uninstall those things in the device manager?

  • I can't boot from OS install USB drive Mac Mini Model 1176

    How I can't boot from OS install USB drive, Mac Mini Model 1176

    Thank you Eustace Mendis for your answer.
    I rebooted the Mac Mini holding the Option key down but it doesn't work. I used an USB drive with O.s 10.7 from Apple that I have used previuosly with other computers and I also tried with a CD install O.S 10.6
    It seems that the Mac Mini can't recognize the keyboard inputs and I tried with 3 different keyboards but still didn't work.
    I also reset the SMC and PRAM but I had no luck. Any clues?

  • Time Machine Lock up using USB drive

    I am using a iOmega USB drive that was recommended and sold by Apple
    for my Time Machine backup drive. Every time I go to Time Machind and
    revert to an older date the program freezes and then I get a device
    removal error. I have to shut off the drive and restart it. But that
    only allows me to look at one past date before it freezes again.
    Anyone Know about this problem??

    That's disappointing. I actually have a separate NAS already, configured for RAID1: a ZyXEL NSA220. Worked fine when I only had windows machines, but isn't reliable with my MACs, and doesn't support extended journaled format, so I need a different solution. I was hoping to just use a USB drive attached to my airport extreme to replace it, but I can't do that if I can't back up that USB drive.
    Can anyone recommend a good backup solution? Surely this can't be that uncommon a scenario?

Maybe you are looking for