USB driver fro MTP on Pavillion

Tryin to get my HP to play nice with my Galaxy S3.  After hours with Samsung, they tell me I need a new USB driver that works with MTP mode on the phone.
The only driver I can find on the HP site is the original one from 2010.  I tried calling HP,but gave up after an hour on hold.
The model is Pavillion 6520F, Windows 7 64 bit.
Any help is appretiated.

I understand you want to update your USB drivers for your AMD system.
The chipset is another component that plays a role in how the USB ports work.  Make sure it has the newest chipset driver found here.
You can also try some of the steps in this document.  The user has a different phone, but it is an Android phone which also uses MTP.
Have you tried installing this driver package from Samsung?  This is what did the trick for me on my S3. 
Let me know what happens. 
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • Curve 9220 BlackBerry App World registration error MTP USB Driver is not installed

    Hi,
    Recently I have purchased Curve 9220, trying connect to BlackBerry App World setup in the first instance I get 
    1. Get the BlackBerry App World Browser Plug-in (I get tick mark) then when I get 
    2. Connect your smartphone I get the drop down of my pin no I select my PIN no here I get a error message (An error has occurred communicating with the BlackBerry App World Web plugin. Please restart your device and try again. If you have content protection enabled on your device, please disable and try again.)
    I have tried rebooting my device no of times it does not work.
    I have removed all USB driveres thats was there in PC rebooted the system it is still not working.
    I have even tried in another PC having win7 it gives error message MTP USB Driver is not installed.
    For information Content protection is not eabled the encription is not ON in my hand set
    Another problem whenever I connect my deice to USB every time it takes up the driver asks me to reboot the sytem (I have even tried the same 4-5 times) still not wokring.
    The hand set is communicating with the BlackBerry desk top software (I have downloaded the latest one and using the same).
    I need to install few apps which was there in my earlier BB so please help.
    Best regards,
    Shaibal Ghosh

    Hello shaibalghosh,
    Welcome to the Community,
    As you having difficulty in connecting to apps. world , On your Homescreen Go to Options > Security > and check 
    encryption is disable For your device and Media card and also Check Firewall it may prevent connecting Apps 
    World. 
              Please have a look at this article of KB Apps world web plug-in error appear when attempting to install applications from a computer
               Try installing OTA .
    Good Luck
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • How to install Huawei MediaPad 10 FHD USB Driver (MTP) for windows 8.1

    Hi,
    My PC's Windows in my workplace and Home is 8.1 Pro.
    I have Huawei MediaPad 10 FHD. The USB driver can't installed, and i can't use from USB for transfer file or data to tablet.
    I use USB for transfer to Table in workplace without error or any problem, But in home PC can't install USB Driver.
    In Device Manager, Appear in Other Device, MTP and Unkuwon Device.
    Huawei Support FAQ this Question and answer was:
    Question: I connect my MediaPad 10 FHD to a PC, but the MediaPad 10 FHD is not displayed as a USB drive. Why? What can I do?
     Answer: MediaPad 10 FHD uses MTP and does not support USB Mass Storage mode. With a PC running Windows 7 or later, your MediaPad 10 FHD is displayed as a storage device, but with a PC running Windows XP or earlier, install Windows Media Player 11 and
    the USB driver if you are connecting your MediaPad 10 FHD to the PC for the first time.
    Using MTP, you can access files stored on your MediaPad 10 FHD from the PC. 
    Please Help me.
    Regards,

    Please post in the appropriate Windows 8 forum @
    http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro for discussions involving Window 8.
    This is a Windows 7 forum for discussing issues specifically about Windows 7, not Windows 8.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • My iPad2 went blank. Troubleshooter says driver software MTP USB problem, what do I need to do?

    My iPad2 went blank. Troubleshooter says driver software MTP USB problem, what do I need to do?

    iOS: Resolving update and restore alert messages
    For error -50: See error 13 and 14: 
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.

  • Apple Mobile Device USB Driver has a driver problem MTP USB DEVICE ACCESS IS DENIED

    I can't do anything i tried to update driver and nothing here is what all it says apple mobile device usb driver has a driver problem MTP usb device access is denied

    DON'T DO ANYTHING LISTED BY APPLE SUPPORT.
    Just try this -
    Start computer in safe mode, go to device manager, locate Iphone, Ipod, or Apple Mobile Device Manager. Update/install driver in safe mode and - voila, successfully installed and no more access denied errors.

  • IPhone 5 iOS 6.1.4 and Windows 7 x64 USB Driver Issues

    Been pulling my hair out with this one for the last week or so and haven't had any luck finding anything on the forums or the web regarding a solution short of a full reinstall of Windows 7 which I am not prepared to do at this time; so hoping someone here can shine some light on this for me
    I have a iPhone 5 that is updated to iOS 6.1.4 and a recently built Windows 7 64-bit machine. All of my other USB devices function fine (keyboard, mouse, Xbox 360 wireless receiver for Windows, and a Seagate 2TB external USB drive). I've downloaded the most recent version of iTunes, installed successfully and then attempt to plug in my phone to sync. I get the standard Windows *ding* that I've attached a device and 1 of 2 things happens (I haven't been able to determine what causes one reaction to happen versus the other): Windows will successfully install the 'Apple USB Mobile Device Driver' successfully and it will appear under my USB devices in Device Manager. However - iTunes will not recognize the phone and I cannot see it in Windows either. In the 'Devices and Printers' snap-in my iPhone will appear under 'Unspecified Devices' as the 'Apple USB Mobile Device'. The iTunes diagnostics fail to find a connected device so the tests fail. As soon as I unplug the device, the strangest thing happens: Windows will start trying to install a device driver and after a few seconds it will fail stating that the "MTP Device Driver" installation failed because the device was unplugged. iTunes also thrown an error "iTunes cannot connect to this iPhone" throwing error code 0XE8000065 (I've also seen error code 0XE8000085 as well)
    After some finagling, I've managed to get Windows to recognize the device under 'Portable Devices' in Device Manager as an "MTP USB Device" using the generic driver. At this point, I've tried updating the driver and manually specifying the Apple USB driver located in the C:\Program Files(x86)\Common Files\Apple\Mobile Device Drivers which updates successfully but then changes the device to "Apple USB Mobile Device" and moves it under the USB Devices in Device Manager; and Windows nor iTunes can see it even still.
    I've tried removing iTunes several times and ensuring that all remnants of the installation are gone (registry and folders on the installation drive) and have disconnected all my USB devices short of the keyboard and mouse and still I get the same results. At this point, I'm afraid that a re-install of Windows is going to be the solution; but it's a drastic one (I have a SSD drive where Windows is installed along with all of my games for faster load times/better performance and do not want to have to redownload\reinstall all of them) and I'm not prepared to undertake it at this time, which is why I'm posting here
    I've used a utility called USBDeview that sees my phone is connected - so I know from a functional standpoint that my USB ports are good and working. I also know the cable is good too - my daughter's PC (Windows 7 32-bit with NO iTunes) immediately sees the device when I plug it in, installs the drivers, recognizes it as an iPhone and I can then see/browse it in Windows Explorer like I would normally expect. My work PC (Windows 7 64bit, NO iTunes) sees the device just fine as well. I would immensely appreciate anyone that has seen this issue or has any additional solutions I can try.
    It's also worth mentioning that I've never used Kapersky antivirus so the UPPERFILTERS value in the registry that I've seen as a solution on some forums is not present on my machine. I'm using Microsoft Security Essentials as my antivirus (no flaming please lol - it meets my needs and is extremely lightweight, which is why I'm using it on a gaming rig) and it's not indicating any issues. I've also tried running iTunes as an administrator (even though my account is a local admin on the machine) and that does not have any effect either.
    If there is anything I left out, please let me know; and I thank you in advance!

    AphexTwin wrote:
    - no Apple input?
    Of course not.  Didn't you bother to read the TOU of this forum?  This is a USER TO USER technical support forum.  Apple doesn't post here.

  • How to change mount options on an install usb drive ?

    Situation:
    I did create an USB drive with three bootable partitions;
    - one bootable volume named “Install OS X Yosemite”, created with the ‘createinstallmedia’ command
    - one bootable volume named “Install OS X Mavericks”, created with the ‘createinstallmedia’ command
    - one bootable volume named “Install OS X Mountain Lion”, created by restoring the /Install OS X Mountain Lion.app/Contents/Shared Support/InstallESD.dmg image within the 10.8 Installer app
    Everything works fine, and I can select any of the three boot volumes in order to boot and install a computer with 10.8, 10.9 or 10.10.
    Here are my two questions:
    1. When booting with the Startup Manager, I can see the three boot volumes on the USB stick listed as startup options. When the first two are named “Install Yosemite” or “Install Mavericks”, the Mountain Lion one appears as “Mac OSX”. Is there a way to change this value / string ?
    NB: renaming the Mountain Lion volume on the USB drive using the Finder was done, but does not change in the way the volume appears in the Startup Manager
    2. When connecting the USB drive to a running OS X system, all volumes mount well, but the Mountain Lion one automatically opens a Finder window. Is there a way to change this behaviour, having the volume mounted, but preventing this Finder window to automatically open ?
    Read about the 'bless' command, but I am not sure this could solve the issue, as my Install Mountain Lion drive is already bootable and working ...

    I haven't had chance to test but bless looks promising…
    http://apple.stackexchange.com/questions/2350/how-can-i-change-the-title-of-a-bo ot-image
    http://apple.stackexchange.com/questions/19183/how-to-prevent-finder-windows-fro m-automatically-popping-up-when-i-attach-a-disk
    … in more ways than one.

  • Apple mobile device usb driver not digitally signed

    I installed(updated) itunes 12.1.1.4 64-bit on wildows 7. Then, it can not recognize iphones and ipods any more.
    I tried every means to fix this, updating windows and itunes, uninstalling and installing, rebooting and restarting.......
    Finally, I find that the apple mobile device usb driver is not digitally signed.  I found this when I open the computer/manage/device manager/portable device/iphone/update driver.  Windows installed mtp usb driver for apple products and indicating the related apple driver software cannot be installed.
    what's wrong with this?  should I wait until apple solve this problem?

    I suggest you try the "for older video cards" version...
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • What USB drive to use to extend TC?

    Hi, I have a first generation Time Capsule with the 500GB hard drive. I would like to plug an external USB hard drive of 500GB or larger into the TC USB port to extend the capacity of the TC. I don't necessarily need to see or access it as a separate drive; if the TC will use it for backups just like the internal drive, that will be fine. Of course I would like to copy files to and fro as well. Is anyone doing this successfully on an OS X 10.6.x system? If so, please tell me what model of USB drive you are using and I'll go buy one right now. Thanks.

    Unfortunately, you cannot use an external USB drive to "increase" the overall drive size for Time Machine Backups. You can; however, use either the internal or external drive as TM destinations.

  • Unabe to update Apple USB driver on windows PC

    whie updating the driver i got foolowing msg
    Window found driver software fro your device but encountered an error while attempting to install it
    Access is Denied

    Hey brinda07!,
    Thanks for using Apple Support Communities.
    It looks like you are having a problem with a driver. You can follow this article and see if you are able to get the driver reinstalled. Also make sure you are signed into an administrator account.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Verify that the Apple Mobile Device USB Driver is installe
    For Windows XP
    For Windows Vista, Windows 7, and Windows 8
    If the Apple Mobile Device USB Driver is not listed
    If the device is not recognized while in Recovery Mode
    Have a nice day,
    Mario

  • The USB drive on my computer is no longer working. How can I transfer my iPod libarary to another computer

    The USB drive on my computer is no longer working. How can I transfer my iPod library to another computer.

    Try:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • Connected usb driver is not detected in window 8.1

    hey .....
     HP 250 G3 notebook
    connected usb driver is not detected in window 8.1 after update BIOS software ....my current BIOS software version  F.22 .... so plsss...fix this problem......

    @jeet2113 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • New Firewire 800 External Hard Drive and how to use old External USB Drive

    Hi All,
    I have a new LaCie d2 Quadra Hard Disk hard drive 500 GB - FireWire / FireWire 800 / Hi-Speed USB / eSATA-300 on the way, when it arrives I plan to use it as my Time Machine Backup drive with the FireWire 800 connection. I am currently using a Seagate Free Agent USB 2.0 320 GB external drive as my Time Machine disk. The reason for upgrading is the USB drive is slow slow slow! I am not concerned about the data on my old drive and will just wipe it clean using Disk Utility. What I would like to do is use the old drive to archive iTunes 7.7.1 and Aperture 2.0 music and photographs. Can someone give me an idea how to go about doing this?
    Thanks!

    Hi, yes that will copy the whole iTunes..including everything in iTunes..BUT, as you add to your iTunes on the Main HD, with the ext HD I think you will have to manually update anything added. Or dragNdrop the whole thing again.. You could also locate you iTunes music Library & just copy that across..With images once again find your iPhoto library & just copy that across..L

  • How do  I Install Windows 7 on Mac Book Pro via a Bootable USB Drive

    Hi Guys,
    I have a Mac Book Pro 13 inch, Early 2011 Processor  2.3 GHz Intel Core i5 (I initially had OS 10.5.8 which I upgraded to OSX 10.9.4 a few months ago).
    When purchased it, I installed Windows via Super Drive (that being the only time i ever used the super drive). My Windows got corrupted for some reason 2 months ago. Hence, I removed the windows via Bootcamp to perform a fresh install. I discovered my Super Drive was no longer working.
    Thereon I have been trying to install Windows via a bootable USB Drive but am failing to do so. After going through several forums, I have reached the following stage.
    1. Created Bootable Windows USB Drive using Windows USB (http://www.wikihow.com/Create-a-Bootable-Windows-7-or-Vista-USB-Drive). Have used this USB drive to install windows on a DELL Computer
    2. Bootcamp wasnt creating a partition for windows since no Windows Installation disc was being detected in super drive. (Solved it by downloading Toast Titanium and loading the .iso file on a virtual drive).
    3. Boot menu was initially not detecting external drive, so installed rEFIt - An EFI Boot Menu and Toolkit. Now it is detecting the USB Drive.
    Now when I boot from this device, it get a black screen with the message "No bootable device - Insert Boot Disk"
    Request someone to please help me install windows as some softwares which I work with are windows based.

    smartestidiot wrote:
    So my understanding is that my Boot Camp Assistant (BCA), since it does not allow USB installer, it sets NVRAM to boot from Optical Drive. Right?
    Yes.
    So can I change it or update it to another BCA version which supports the same??
    All BCA versions drive the logic based on the Mac Model Identifier. Unfortunately there is no real workaround. .
    Please see https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Early+2011+Optical+Driv e+Replacement/5122
    and https://www.ifixit.com/Store/Mac/Unibody-8x-SATA-SuperDrive-Post-Early-2009/IF16 1-073-2.

  • Global reset of file / folder permissions on a USB Drive

    I just migrated to a new MB Pro. I now have an issue with file permissions on my USB drive that I use for Time Machine and some other external data. I understand (sort of) why the permissions are messed up, because you're forced to come up with a new user name when you migrate your data and applications. That being said, I just want to globally reset / update the permissions on my USB drive and it's data so that I'm the owner; and I can read and write. And I want to save all my data.
    I've started this process going from the "get information" screen, so I think I know how. But it's been running forever. Isn't there some type of universal setting for a drive or does it just need to crunch thru every single file and directory?

    Whatever you've done already it's the wrong thing to do. You cannot arbitrarily change permissions on every file on your backup using the Get Info window. The result will be a complete screwup of all the file permissions on your backup. You will manage to make a simple problem into an unsolvable one.
    Next time you should ask first before you act rather than after when you cannot go back. Since you did this to your TM backup drive about all you can do at this point is erase the drive and start your TM backups from scratch. Of course this doesn't resolve anything for whatever you tried to migrate to your new computer.
    If you migrated your old Home folder to the new computer then first be sure the account has admin status, then log into the account. You should then have full access to all your restored files. You can then delete the other user account.

Maybe you are looking for