USB drivers for Win XP K7T266 Pro

Hello,
i was wondering if someone could direct me to the Windows XP professional drivers for my USB ports. I am using a MSI mainboard with the VIA K7T266 Pro chipset. Whenever windows restarts it attempts to install the drivers. It says that the "data" was "invalid". I have tried downloading the service pack and it did not recognise the USB drivers and i cannot download these drivers from the MSI site manually. I have also tried using the live update function on the MSI site.
Can i get another round of applause for windows XP! what a great product!!! :(
Please help....i need to install my new USB modem and its driving me crazy.
Thanks

Hi,
It depends on the type of board you have.
If it's the K7T266pro V1 then you better buy a PCI USB card as the ports give problems at 133FSB anyway.
If it's the K7T266pro2 V2 then you need indeed SP1 for XP and let the ports redetect.
The V1 board has a serious USB problem at FSB133 and can't be solved by BIOS or drivers.
Only a PCI card or lowering the CPU-FSB can solve it.
The V1 board is very old and only a few have been sold a long time ago and was quickly replaced when the problem was discovered.

Similar Messages

64 Bit Windows7/8/8.1 USB drivers for Palm Desktop

Thanks to the great folks over at Aceeca.com (makers of NEW PalmOS Garnet devices), USB drivers for 64bit Vista, Windows 7, and Win 8 operating systems are available. There are many users reporting Palm Desktop 4.x is also working.
I have synced my TX to my Vista64 bit laptop, and Windows 8.1 HP Spectre X2 hybrid successfully via my USB cable.
The drivers are located here:
Aceeca Driver Downloads
Installation instructions (from Aceeca) for Windows 7 are included in the download.
Basic instructions:
1. Download the drivers and Extract them to the same folder. Remember the folder you extracted them to.
2. Try to HotSync your device. It will fail.
3. Open the Device Manager, and look for the Yellow Triangle next to either "Acceca" or "Palm Device" under "Other devices".
4. Right-click on the device, and choose "Update Driver Software".
5. Choose "Browse My Computer for Software" and direct it to the folder you extracted the Aceeca drivers to.
6. Choose "Next" at the driver file location window, and then tell it to "Always trust software from Aceeca Ltd." then click the "Install" button.
7. I received an error message (Vista64) that told me "The drivers were installed but the device couldn't be opened." I saw that my TX had timed out and went to sleep. I tried a HotSync and it worked!!!
Good luck!
NOTE: Palm Desktop 6.22 may only show Media and Install. Here's how to fix that:
If Palm Desktop 6.2.2 only shows Media and Install, try this: Right-click on the shortcut for Palm Desktop, then choose "Run as Administrator". The ther modules should appear.
To make Palm Desktop Run as Administrator every time in Windows 8/8.1:
Close Palm Desktop, if open. (This is a very important thing to always do when using 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)
Right Click on the Palm Desktop Icon in the Metro screen, then choose "Open File Location". You will now see the actual file for the shortcut.
Right-click on the "Palm Desktop" shortcut file, then Properties. Now pick the Compatibility Tab at the top.
At the bottom of the Compatibility Tab is a checkbox: "Run this Program as Administrator", Click OK .
Try opening Palm Desktop, all the parts should appear. You may see a box open when you close the program asking "Did the program run correctly?" I picked "Yes", and it's been working fine since then!
If you are using a much older PalmOS device and want to try using Palm Desktop 4.x, you will need this additional patch from Pimlico Software:
Palm HotSync Setup
WyreNut
Forum member bobboffin has added this post:
"After attempting your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step quite difficult. This happened to me, and after some investigation I discovered the following tip that allows Device Manager to show hidden and non-present devices.
Open up Notepad and paste the following two lines into it:
set DEVMGR_SHOW_NONPRESENT_DEVICES=1
start devmgmt.msc
Save it as SetDev.bat into My Documents.
Open My Documents in Windows Explorer and double click on SetDev.bat. Device Manager should open.
In the View menu select Show Hidden Devices.
You may now see under the Other heading the failed device with a yellow triangle against it.
You can now proceed to install the drivers per the instructions.
Note that the driver supports most Palm OS versions. I'm actually using an Aceeca Meazura 1000 ruggedized PDA running OS 4.1 --- bobboffin"
Hope this helps!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
This question was solved.
View Solution.

Thank you so much. I was thoroughly disappointed to see that the support telephone for paid support had been discontinued. I thought I would need to replace my (ancient but serviceable) Z22.
I followed the instructions listed here and am very happy to report that I completed a sync!
Thanks again.

In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

New ipad USB drivers for pc running on win7

Error message when downloading USB drivers for new iPad for win 7 (64 bits)

My husband's laptop which is at least 3 years older than mine has not problem with charging or recognizing my IPAD. So I don't think the USB ports have anything to do with this problem. What I see is that the PC wants to load MTP USB driver which fails. I have the Apple Mobile Device driver installed and activated. My computer does not see the IPAD but Itunes does. How do get the PC to recognize the apple mobile device driver before it tries to download the MTP USB driver? I am going to try the last suggestion from Diavonex to see if it will work. This is sounding more and more like a Windows problem. BTW both my and my husband's laptops are Dell so I might try looking there also. Wish I had an answer.

Safari for win 8.1 pro

where can i download to safari for win 8.1 pro (64bit)
I am already safari at home on my macbook but i wanto use safari on my pc at work.
many thank for your help

Use may use the last version of Safari available for PCs, it will work just fine.
Here's the link.

I need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help

i need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help if any one has the drivers or knows were i can download them

Doug...
If you don't have it for reference, the manual might come in handy > US/Boot_Camp_Install-Setup.pdf
After it loads, Command + F to find information regarding the drivers.

USB drivers for Ellipsis 7 tablet ...

Does anyone know where I can find the USB drivers for my Ellipsis 7, needed for development work?

Verizon Ellipsis 7 Drivers

TS1369 unable to install usb drivers for ipod/ipad/iphone, even after following steps from diagnostic testing

I have followed the steps suggested to reinstall the USB drivers for my ipad/ipod/iphone products, but receive a message that says one of the installers cannot perform the installation at this time. I've tried numerous "other" times, but get same msg.

Hi 2010c309a,
I understand you are having issues with your scan software on your computer. I recommend a complete uninstall reinstall.
The HP uninstaller program might be available on the printer CD, depending on the printer model. If you have the printer CD readily available, try this option to quickly check whether you have the HP Uninstaller, and then run it. If you do not have the CD uninstall all HP printer software from the control panel. Here is a document you could look at for help.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02259020&lc=en&product=3737195&tmp...
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started.
Scroll down to Windows imagine Acquisition. Startup type should be - Automatic, and Service Status should be - started.
Restart the computer after this step and try installing again.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

MSI GX-700x DRIVERS FOR WIN XP HOME SP3

MSI GX-700x DRIVERS FOR WIN XP HOME SP3
PLEASE LINK

Quote from: herman.design.studio on 27-August-13, 05:37:17
uz jsem tam kopnul zase win7 64bit profesional na to drivery sou dik
Use English please.

Laserjet 1100 drivers for win 7 pro 64bit

need drivers for the above
details
Laserjet 1100 mono
model" s4224a
sggjo25836
these are the only details on the sticker on the back of the printer..
It does NOT have product number.
comes up wth this error
Error: This product number is not associated with the serial number provided. Please review your records and make any necessary edits.
Have tried upper & lower case with the same result.
Help please!

Hi,
The drivers for your printer are already included within Windows Update.
Follow these steps to install the printer on a Windows 7 PC:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Where are the USB drivers for my MSI board??

Got a new MSI board- VIA KM266 Pro + 8237 Chipset Based. I installed my new AMD 2300+, WIN XP, etc. I have a USB printer. Got everything installed, printed a test page, and then a document. Everything fine. THEN, I go to use my printer a few days later and it says "Printer not responding". So I troubleshoot, and then go into Device Manager and notice there are no USB devices installed. The new MSI board has 4 USB ports on it. The CD that came with the board has no USB drivers on it (I checked). WIN XP has no USB drivers. What is going on? How do I get the USB ports to work? Am I looking at it all wrong? Appreciate any help out there!

Quote
Stu: He started his thread saying "Got a new MSI board- VIA KM266 Pro + 8237 Chipset Based."
osnavi, that is true. after searching through MSI website, i think this is the board he is referring to, KM3M:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=611
sonic, what is your USB printer?

Driver VGA VPCCW2JGX for win 8.1 pro 32-bit.

Hello., I Justed updated operation to Win 8.1 pro 32bit. I cannt to find driver for VGA card with VIAO model VPCCW2JGX. Could you please help me to solve thi problem. Thanls & regards.,ALI QUANG.

Hi aliquang!
Thank you for considering Sony Community!
Since you Vaio VPCCW2JGX is a U.S. model, all drivers and software for this specific model is available in our eSupport website. You mentioned you updated operation to Win 8.1 pro 32bit. Did you install a retail version of Windows 8.1? and you're using 32bit not 64. Another thing is, we only have drivers for this unit for up to Windows 7 64-bit.
Unfortunately, we do not have drivers that support the Operating System of your laptop. You have an option to reformat the unit back to its original factory settings then download the drivers from eSupport site.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Regards,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

Sorry still in trouble with corrupt drivers for Win 7 ....

Hi i have an early 2011 Mac Book Pro. I installed Win 7 (using boot camp) and Win 7 just about works OK, but of course it is missing the correct drivers, which i thought were available from the Mac OS X disc, obviously not from the Mac Application drivers disc.
So then i asked the question on the Forum, where it was suggested because i have a fairly recent Mac Book Pro i should download and burn to Disc the correct drivers by running Boot Camp. When this is done simply run the SETEUP.EXE file in Windows 7 and it will all be sorted !.
Sadly it doesn't and isn't, i run the SETUP.EXE file and i am presented with two options ....
1. Remote Install Mac OS X
2. DVD or CD Sharing
i do believe according to the instructions i have read elsewhere there should be 3 options, the first option should be ... Install MAC drivers for Windows 7 !!!!
So please can someone help me out here ?.
Tim

It shouldn't require pounding the answer over and over. it shouldn't even require using OS X DVDs. Or typing the same answer on the keyboard multiple threads and times. It SHOULD either just be an independent download, or "FIX" whatever that 10.6.6+ 'featue" in Boot Camp Assistant. An additional chapter in the Boot Camp for Windows install PDF Guide.
the troubles are not with Windows my dear Dr Watson at all, no sir. They are in the guide, self-inflicted, left out of the guide, lack of reading the guide, and there are 100s of articles that belong under and in the Apple Support product page for Boot Camp (and weed out the stuff that is old, and have a link to sub-category if needed, and a "NEW Support Articles" addition. Which of course only .001% check to see.
Like this tidbit from a week ago:
Resolving issues with Windows when using Apple Magic Mouse or Apple Wireless Keyboard
Belong listed -
Apple Support Boot Camp
And having all "knowledge" base articles on everything made that harder to wade through than before it ballooned to take in all the devices and products (not just "mac"). Which you or I would almost have to check a couple times a week.
Apple KB articles

Qosmio G30-126 Sound drivers for win XP

I install Win XP to the second disk win xp Professional but i could not found drivers for thw sound system What can i do?? I have to install Win XP MCE????

Hi
This sounds very strange and implausible because the driver XP MCE should definitely works with XP Pro. But try another hint:
Remove the old sound driver, download the sound driver for the Vista and try to install it.
In some cases the Vista sound driver works with XP. Check it out and please report the results its interesting.

USB Drivers For V8237 Chipset

Does anyone know where I can get USB 2.0 drivers for the V8237 chipset? The ones listed on MSI's site says their only for the 8235.
VIA USB2.0 Drivers
Support model VIA 8235/8237 based SB chipset motherboard
Description
• Add setup VIA Filter Driver for Win2K/XP.
• Remove "One Touch" setup function.
• Driver Version:
- Win2K 5.0.2195.5652
- Win98/ME 4.90.3000.03
Note1: This Driver only for VIA based board with VT8235 southbridge chipset, please DO NOT use on other models.
Note2: For WinXP, please use Microsoft Windows Update to download driver from Microsoft or aquire the latest service pack
WinXP SP1 Download Website

That one is just for where the USB2.0 might not be identified as VIA in Windows. It just changes the text displayed in device manager. If the USB 2.0 device is shown as Standard EHC or something like that then it changes it to VIA USB2.0 or something like that. Does nothing to the driver itself.
VIA filter driver looks like the USB 1.1 patch here:
http://www.viaarena.com/?PageID=298
The info on the USB 2.0 package (same page) says it can be installed on top of the Win XP SP1 driver "to further improve device compatibility", whatever that means.

USB drivers for Win XP K7T266 Pro

Similar Messages

Maybe you are looking for