Usb, firewire, bluetooth all do not work

I downloaded the most recent update for my OS X tiger software, and ever since the download my bluetooth mouse won't pair with the computer, I can't use my usb jump drive, my ipod is not recognized, and I can't download .dmg files because after they are done it gets stuck at "preparing disk image." Any ideas as to what the problem is or what I can do? Everything worked fine before this update.

Welcome to the Apple discussions.
If you used the software update function, sometimes the updates just don't do everything they are supposed to. You didn't say what release of Tiger you upgraded to, however assuming it's the latest, if you download the combo update and apply that, it may set things back to working order. It's located here.
Before downloading that, I would reset the power management unit (PMU) following these directions.

Similar Messages

  • Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

    Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

    What's more, they don't even show on the bluetooth devices list..

  • Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!.

    Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!. Does anybody else have this problem?. Or does anybody have a solution to the problem. If So please help me its driving me demented seriously concidering to go to android for that sort of stuff cause of the dame restrictions on apple devices!

    iOS devices do not pair with computers, as data transfer over bluetooth is not supported.
    Computers are not airplay compatible unless you have downloaded an app to make them so.
    User to user forum, so I don't care if you switch to android or any other threats you make.

  • Till my last software update on my MacBook Air I have been able to use my iPhone as a modem via USB. Now it's not working anymore. Other functions via USB are still fine. Any ideas???

    Till my last software update on my MacBook Air I have been able to use my iPhone as a modem via USB. Now it's not working anymore. Other functions via USB are still fine. Any ideas???

    The Mac was recently upgraded so it is the Mac, or is it?
    Looking for a common denominator:  I'l start with wi-fi as the common communication medium.
    Known:
    A) Broken: iPhone —> wi-fi —> Mac.
    B) Broken: iPhone —>USB—> Mac.
    C) Broken: iPhone —> Bluetooth —> Mac.
    D) Working: Mac —> USB —> other USB devices.
    Unknowns:
    E) Test Mac —> wi-fi —> a non-iPhone router.
    F) Test iPhone —> wi-fi —> another wi-fi device.
    Given not A, not B and not C either the Mac or the iPhone could be the culprit.
    1) E        |  F        : Non sequitur (deepens the mystery).
    2) not E  |  F        : The Mac is the common denominator.
    3) E        |  not F  : The iPhone is the common denominator.
    4) not E  |  not F  : All heck broke loose.
    For case 1:  It would be something on the Mac that prevents it talking to the iPhone through three media even though it can talk to other routers over wi-fi.  That would be weird indeed, given the iPhone is talking to other wi-fi devices with no trouble. 
    For case 2:  All of the Mac’s intranet media broken (wi-fi, Bluetooth, and wired-USB) and at least wi-fi works on the iPhone.  Something weird is going on in the Mac.
    For case 3:  The iPhone router function is broken.  Upgrade the iOS?  Test using another iPhone?
    For case 4:  Throw everything in the trash and start over.

  • USB connection with PC is not working after updating firefox OS 1.3 to 2.0 on my device. How to fix this?

    After updating OS 1.3 to 2.0 usb connection to PC is not working. I am using firefox os device Flame. I cannot share files with my PC. Please help me to fix this problem.

    ''Ralph Daub [[#answer-694088|said]]''
    <blockquote>
    Hi Raiyad Raad,
    I'm sorry to hear that you're having issues when connecting your Firefox OS device to the PC, after updating it from v1.3 to v2.0.
    Please ensure that USB Storage and Media Storage are activated.
    If you are still having issues after activating USB storage and restarting your device, please write back to us with the following information:
    * What is the model of your phone?
    * What is the OS version and Build ID found in the Device Information page? Please visit [https://support.mozilla.org/en-US/kb/how-do-i-find-what-version-firefox-os-i-have this link] if you need help finding the Build ID of your phone.
    * Please describe the steps you took to update your device.
    * Please provide the exact steps to reproduce the issue you are encountering.
    * How often do you encounter this issue?
    Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we have all the necessary information to investigate this behavior.
    - Ralph
    </blockquote>
    I've activated the USB storage and media on the phone. But still it's not working. I'm using T2mobile Flame and my OS version is 2.0. Build ID: 20141016183911
    I've written a blog about how I updated it here: http://raiyadraad.blogspot.com/2015/02/how-to-update-firefox-os-13-to-20-with.html
    I'm having this problem after updating to firefox OS 2.0

  • S10-3t bluetooth and wireless not working with windows 8

    S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

    Do you still have your windows7 install files ? 
    ( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
    if yes I fear you have to enable it in win7 and then use it in win8
    http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
    Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
    Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
    OS:GNU/Linux/Debian

  • Touch pad. Bluetooth and camera not working

    i installed win 8 in my hp pavilion dv6-6176sx and format the hard disc then i installed all drivers from the internet because my cd is broken.  the problem is: my mouse touch pad don't work   , my camera and Bluetooth . and iam sure the problem is't hardware problem . what shout i do ?? PLZ i want fix it hurry as i have a lot of work
    then i back to win 7 64bit and make all ubdates and install all drivers and all still not working 

    Hi @abdallah2020
    Welcome to the HP Support Forums!
    I understand that you are having trouble with the drivers for your notebook. Where did you find them online?
    The supported and HP customized drivers for your notebook are only available for windows 7. Please see the following:
    HP Pavilion dv6-6176ex Entertainment Notebook PC Drivers
    For any drivers you find elsewhere for windows 8, there is no guarantee that it would work. Although it is certainly possible. Most notebook manufacturers do customize the drivers for the set of hardware in a unit. You can check out the following for suggestions and the reasons some drivers are not made.
    What if I Don't See My Operating System?
    If you wish to try the windows 7 installation, then the drivers are at the page I included.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • I buy a new compaq presario cq57 408tu but its bluetooth and wifi not working even installing driver

    i buy a new compaq presario cq57 408tu laptop , but its bluetooth and wifi not working even installing all driver

    Hey there. You didnt state what operating system you are using but I was able to find two articles that should help resolve your issue. 
    Troubleshooting Your Wireless Network and Internet Connection (Windows 7)
    Fixing Bluetooth Issues
    These articles will go through all the basic troubleshooting steps. Let me know if this helps resolve the issue at all.
    Thanks!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.

    I have been receiving the following error and instructions to fix it for a long time now, prior to updating to Windows 8.1:
    A device is not working properly
    Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.
     Recommended solution to the problemUse Windows Update to check whether new device drivers are available. Proceed as follows:
    Open Device Manager
    Search in the device manager for the device whose driver you would like to update and double-click on the device name. You may first have to enable the "Show hidden devices" entry in the "View" menu.
    Switch to the Driver tab, click Update driver and follow the instructions
    When I follow the instructions and try to update the driver, I am told "The best driver software for your device is already installed."
    How do I update the driver to stop receiving the error?  
    This question was solved.
    View Solution.

    I have solved the initial problem.    
    I found the solution on the Forum at http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03926756&tmp_task=solveCategory&cc=us&dlc=en&la...

  • Hp pavilion 1012tu usb 2.0 ports are not working

    my hp pavilion 1012tu USB 2.0 ports are not working only the 3.0 port is working

    Try this:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01893385
    or
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03327635
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • My apple usb adapter for iPad dose not work any more

    I use USB adapter before , but can not work any more

    Can you try it with someone else's adaptor to make sure that is where  the fault lies?
    Make sure it is connected directly to the wall socket and not through a two way adaptor.
    Move both ends of the cable slight to make sure there is not a loose connection.

  • Double click select all does not work in web site's search area after going back.

    After updating from Firefox ESR v24.8.1 to v31.20 double click select all does not work in a search area after going back or searching again with the same input. It happens before clicking search icon and searching for something else double click select all does not work except it works for one word that's all.
    This issue is with all new Firefox ESR and None ESR I have tried. Also the issue is on all web sites like www.softpedia.com for example.

    Bugzilla has a different login system, unfortunately.

  • I have a MacBook Pro which has a SSD replacing the superdrive. I have bought an Apple USB superdrive but It's not working when I plug it in?

    i have a MacBook Pro which has a SSD replacing the superdrive. I have bought an Apple USB superdrive but It's not working when I plug it in? Is it broken or do I need to download something to make it work?

    System Requirements
    MacBook Pro with Retina display
    MacBook Air computer
    Mac mini computer

  • TS5180 voiceover all is not working

    voiceover all is not working, after press at the home button three quicks press the voice over all is not working, the /CANCEL/START AGAIN/EMERGENCY CALL
    even try to press five susequent time still no response

    Did you enable VoiceOver to be turned on using 3 clicks on the Home Button?
    Settings > General > Accessibility - Triple click Home button for...

  • Sound is off in iphone 4.. Speaker mic all sound not working in iphone 4.. What i do? Any help me!!!!

    Sound is off in iphone 4.. Speaker mic all sound not working in iphone 4.. What i do? Any help me!!!!

    Get a new SIM from your carrier.

Maybe you are looking for

  • How to disable SAVE AS option while opening PDF in browser in OAF

    Hi All, We have created a page with MessageTextInput fields. All the datas are captured and export into PDF format. We have done this through XML publisher. PDF will be generated when we click on Generate button. PDF is getting opened in the IE brows

  • Print to Adobe pdf does not give option for .pdf file

    I recently installed Acrobat X Pro.  I have a 10-page pdf document open in Acrobat.  I want to eliminate the first page and save the other 9 in another file. In previous versions, I would select Print and then select the printer "Adobe PDF".  When I

  • Converting ANSI 850 messages in Seeburger from XML to EDI

    Hi, I really wish for your help with regard to the following error:             “[Error:ID=2012;LEVEL=3] InhouseDocReader doSyntaxCheck() Offset[2]: Could only identify segment S_N1 as dirty! (Counter exceeds)DESCRIPTION: InhouseDocReader: Syntax che

  • Batch export of images from fla in flash professional to photoshop

    Hi I need to use the images of a lot of flas and put them inside photoshop to add effects to them. We have over a thousand. Is there a way of doing this? Thanks in advance.

  • Hi, formula node

    Hi, I am confused now about the formula node. The labview begins with 0, so the angleP is from 0-1023, however, in the Mathscript the index begins with 1. So I should use index k not k-1. But when I use angleP(k) in the Mathscript, the errors says th