USB flash Does NOT recognized by WRT160N !!

i bought a wrt160nl last week for only use usb storage port in the my network(i have a Satellite reciver that it connected to my nwtwork and i need this usb port for record movie from reciver)
i used to a usb flash (JeFlash Transcend 8GB) to usb port of router but it does not recognize by router !!
i reflash router with frimware v1.00.01.17 but it didn't success (this version was very unstable with internet and i had to back frimware v1.00.01.15 again)
i reset my router 2-3 but i didn't give any good results .
i reformat usb flasf with winXPsp2 in fat32 and ntfs too and i used some another usb flash but there was same problem
can anybody help me?
thanks

That problem resolve with a new another usb !!
but now i have a big new problem,......
now i cant see new folder option and creat bottom when i click on creat share
please see this image:
its mean i get this :
we need to this option for a good share folder
i reset router, format usb flash .....
but dont appear this option !!!
i think Lynksis group support have to release a new version frimware very soon for usb port of this router
and i'm waiting for response from any Lynksis support Group

Similar Messages

USB flash drive not recognized by computer. Have tried all options of which I can think.

Okay. I have a Patriot S-Mini 32GB flash drive that my Windows 8.1 HP Slimline 400-434 is not recognizing. I believe it recognized it once, and has refused to do so since. My laptop (Windows 7 Toshiba) recognizes it just fine.
All other USB devices function perfectly on this computer. USB mouse/keyboard/USB Hub/Apple iPhone cable.
1. I have tried unplugging all other USB devices before trying this one. FAIL
2. I have gone to Device Management and the USB drive does not appear in the list. FAIL
3. I have uninstalled the USB Root Hubs and restarted the computer. FAIL
4. I have tried plugging the USB drive into the rear ports that plug directly into the motherboard. FAIL
5. I have updated the drivers, and have been unable to find a BIOS update as the link on the HP website downloads and says that it is incompatible for my computer. FAIL
...so what the bloody gorram heck do I do now?
This question was solved.
View Solution.

Okay, and in the most ridiculous way I have ever solved a technical problem...
The USB flash cannot be inserted ALL the way into the port. It has to be inserted slowly, so that the contacts line up.
I figured this out by trying to connect it into my USB hub and noticing that the red indicator light was going on and off as I inserted the USB drive, flickering on as I inserted it and then off once it was all the way in.
Weird. But hey. It works now.

USB flash drive not recognized by Macbook Leopard 15.1

Hi
Until last week my macbook was able to recognize my USB flash drives and my IPOD in Itunes and also as an independant drive.
Last week it started to give trouble. It simply does not recognizes any USB flash drives I plug in as well as my IPOD music into Itunes.
This is very strange since it is recognizing the HP all in one. It scans and prints. I purchased this HP all in one last week and installed the software for it. I am not sure how this could have affected that I cannot mount any USB drives.
Can you please help? Anyone?
Thanks.
Viri

Hi
Welcome to Apple discussions
Can you see the devices if you use Utilities/Disk Utility? Maybe you need to reformat them. Take care, reformatting will lose the data on the device.
Bob

USB flash drive not recognized on desktop or disk utility

I see a number of similar threads to this but nothing solves this problem. Any help will be greatly appreciated as I am about to go crazy!
I have 3 USB thumb drives that all worked 2 days ago - now only one does. I have tried all drives in multiple ports and the same result. I have restarted the iMac (2009 Yosemite) a number of times and the same result.
This came about attempting to create bootable USBs with each of these. I was struggling with the process on my mac so took 2 (brand new 16GB PNYs) to a PC created the live boot USBs and they booted fine on the PC (knowing this wouldn't boot my mac). I did however plug them into my mac and they were recognized. I finally found success creating a Ubuntu live boot with my old USB. With that success I wanted to try with one of the new USBs on the mac.
Here is what I did:
1. Using Disk Utility - Reformatted the drive 1 partition MS Dos FAT 32
2. In Terminal unmounted the drive and ran a dd command to copy the linux .img file successfully
3. Box came up saying drive not recognized and selected to ignore (this happened on my old one that still works also)
4. Ejected drive from terminal
5 Restarted mac and attempted to boot from USB without success.
After this the 2 new USBs were no longer recognized in any usb port while the other still is. They do not show on the desktop nor in Disk Utility. I checked them on the PC and they are still both recognized and showing the FAT 32 format.
Help please!

Thank you for the reply. I found some time to go through this process a number of times without success
Any other suggestions?

Flash does not recognized

Hello!!
I am a linux user (puppy linux). I would like to report some strange problem with firefox since version 8.
Firefox does not recognize flash. It does not show flash content.
the libflashplayer.so is situated in /usr/lib/mozilla/plugins. Is this wrong? Is there a new place where the file should be located?
regards
mar

Your More system details list shows the flash plugin (Shockwave Flash 11.1 r102), so Flash should be working.
You have the Flash Block extension, so make sure that its isn't blocking the Flash
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Boot camp USB flash drive Not recognized!!! by MacBook Pro

any help!? I already modify my Bootcomp!!! but every time when I'm (successfully) created USB with Windows iso is never been recognized as bootable USB!!! any help please!!! I spend already three days and nights trying to fix this without success!!!!

Hi
Welcome to Apple discussions
Can you see the devices if you use Utilities/Disk Utility? Maybe you need to reformat them. Take care, reformatting will lose the data on the device.
Bob

Usb flash drive not recognized

My Macbook Pro on a Lion is recognizing small capacity (< 2 GB) flash drives, but whenever I try to plug a higher capacity the device won't appear. I have done some tests but the problem persists

And you are posting in the iMac forum because??????

TS1363 after up dating to 11.1.5.5 itunes does not recognized any of my devices. I've tried everything listed.

after up dating to 11.1.5.5 itunes does not recognized any of my devices. I have tried all the recommendations in help.

Updating the USB driver did work. Referenced in other postings as Section 5. I guess I had not tried that one.
Thanks

I have a new Nano and I get a message that says the USB device is not recognized by my computer and I cannot set it up.

I have a new IPod Nano and when trying to connect to my PC for the first time I get a fault message that says the "USB Device is not recognized by my computer. I have several other IPod devices and have never had this problem. When I go to windows explorer, the device does not show at all, so I cannot manually open it.

Hello JETaylor2015,
Congratulations on your new iPod nano! I would be concerned too if my iPod was not recognized by iTunes or my computer. I recommend reviewing this article for steps to take when your iPod is not recognized:
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
Thank you for using Apple Support Communities.
Best,
Sheila M.

Lion does not recognized HP Scanner

Lion does not recognized HP Scanner. Lion initially recognized the scanner and it worked perfectly for months. All of a sudden communications with the scanner stopped. I have checked the USB cable and it is working properly. I am using Bootcamp and when I boot in Windows the scanner and computer (iMac) work perfectly. I have downloaded, removed and reinstalled the HP software and update for Lion. When I go into System Preferences > Print/Scan, It sees all other printers and scanners including another HP printer scanner.

Hi.
what's your printer/scanner model #? If RRFS' suggestions fail to resolve your issue: try removing the HP drivers from /Library/Printers folder then with device connected directly to your computer, check for software updates, this will push HP software/drivers to your system - install them.
"do not install drivers from printer/scanner disc"
After installation, make sure the devices, both printer and scanner show up in system preferences > printers - try scanning. Also check with a native Application like image capture, see if its recognizing your scanner.

My usb port does not work on all user accounts

My usb port does not power my iPhone or Apple keyboard on my main account, but if I switch users it begins to work
Spring 2011 macbook air with the latest OSX as of Jan 2012.
Thoughts
THANKS
Stan

Try Resetting the System Management Controller (SMC)

Apple USB keyboard does not work with one internal usb port

Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
Guillaume

I'm facing the same problem, found any solutions ?

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

External USB keyboard does not work with T60 after BIOS upgrade

External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
It does the same with or without the docking station.
Anyone else bumped into this problem yet?
Has someone found any fixes for this?
t

Hi and welcome the forum!
Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Apple USB keyboard does not work

I have the same problem as described by Sweboss on November 15th, 2012. The Apple USB keyboard is working perfectly, but if I shut down the computer, when I switch it on again, the USB keyboard does not respond, and the computer is looking for a Bluetooth keyboard (which I had before). I have tried switching off, unplugging all peripherals, then unplugging the computer, waiting 15 seconds, then plug it in, wait 5 seconds (this is a remedy proposed in other mails). Switch on and the USB keyboard does not respond. It is not that particular USB port, as it works perfectly well with other peripherals like my scanner, or printer, and changing ports does not help. And when I tried it last time, I had no other USB peripherals connected. Can anyone help?

That is definitely some strange behavior, good to finally be working, but does not explain exactly what causes the behavior. Could have something to do with the energy saver part of the operating system, or a miscommunication with the USB bus itself. With multiple USB ports it would be good to test on different ports to see if that is an issue. Anyway, it is working now and that is good.
Another I don't know why but it works: a couple months ago a user was having problems with a wireless keyboard. The keyboard-iMac communication resulted in random charaters, time lag, and other bad behavior. The user finally found by accident that turning the keyboard off, removing the batteries, and then spending about five minutes just pressing keys, placing the palm of the hand on the keyboard and pressing, just pressing and pressing, and then replacing the batteries and turning on the keyboard, it worked fine. Seems like it is necessary to just force the keyboard to discharge all of the key switches. Those keyboards use capacitance switches instead of mechanical switches. So they retain a charge.
While that was a wireless keyboard, I wonder if that was what happened in a way with your keyboard...the unplugging and leaving it for a period of time, any charge may have dissipated and it would work again. If this happens again, try the above procedure and see if it helps.

USB flash Does NOT recognized by WRT160N !!

Similar Messages

Maybe you are looking for