USB Flash drive not showing on DT

Hi folks,
I received a USB flash drive with 2 GB capacity made by Super Talent (www.supertalent.com- look under Aluminum flash drives).
Upon plugging it into the G5's USB port (i've tried them all) I get a "Cannot recognize- Initialize/Ignore/Eject" message. Clicking Initialize brings up Disk Utility which sees the drive with a capacity of..wait for it..2 Terabytes! Here's DU's info:
Name : SKYMEDI USB Drive Media
Type : Disk
Disk Identifier : disk1
Media Name : SKYMEDI USB Drive Media
Media Type : Generic
Connection Bus : USB
Connection Type : External
USB Serial Number : 03
Writable : Yes
Ejectable : Yes
Mac OS 9 Drivers Installed : No
Location : External
Total Capacity : 2.0 TB (2,199,023,255,552 Bytes)
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 0
Selecting HFS+ (journaled or not) or MS-DOS then clicking Erase gives me a spinning beach ball requiring me to Force Quit DU.
My config: G5 DP 2.0, 1 GB ram, 10.4.6
Any thoughts?
G5B DP2.0 & iBook366SE Mac OS X (10.4.6) Alu 20-in Display

hey there scan,
I gave the drive to a friend who has an iMac. Samething occurs: drive does not mount, DU erroneously reports 2 TB capacity and coughs up the beachball seconds after clicking on Erase to format it. He's on 10.3.9 while I'm on 10.4.6.
All the ports on my G5 are in working order as i use printer/scanner and iPod w/o problem.
Think the drive is going back.
Frank

Similar Messages

USB Flash Drive not working

I have purchased a USB FLASH DRIVE v112b 16GB on 26.12.13 from HP
dealer in Agartala. after using 2 months I'm facing problems with it.
Suddenly an error is showing " you need to format the disk before you
use it but format is not possible as another error showing format not
possible. what should i do now with it?
Please solve my issues asap.
Neal

Hi Neal2014,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you recently purchased a HP USB drive. You are now getting a message to format it, but are unable to. Have you tried to format it on a different computer?
If you are unable to format the drive, I suggest you call HP support, as I believe it will still be in warranty.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. HP Technical Support Sitemap
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

USB flash drive not recognized by Macbook Leopard 15.1

Hi
Until last week my macbook was able to recognize my USB flash drives and my IPOD in Itunes and also as an independant drive.
Last week it started to give trouble. It simply does not recognizes any USB flash drives I plug in as well as my IPOD music into Itunes.
This is very strange since it is recognizing the HP all in one. It scans and prints. I purchased this HP all in one last week and installed the software for it. I am not sure how this could have affected that I cannot mount any USB drives.
Can you please help? Anyone?
Thanks.
Viri

Hi
Welcome to Apple discussions
Can you see the devices if you use Utilities/Disk Utility? Maybe you need to reformat them. Take care, reformatting will lose the data on the device.
Bob

USB Flash Drive not mounting

I recently bought an 8GB USB flash drive, which came formatted FAT-32. The drive was put into a friend's Windoze laptop and had a couple GBs of jpeg and avi files transferred to it. I took the drive home and put it in my white MacBook (4GB RAM, Leopard 10.5.8) and it would not mount. I put it in my G4 MacMini; likewise, it wouldn't mount. I am assuming it also won't mount in all my older Macs with USB, either. I returned it to the Windoze laptop, and it ALSO wouldn't mount this time, except as one pulled the flash drive from the Windoze laptop, for a second a window with the flash drive's contents would flash on the desktop of the laptop. Originally, the flash drive was "properly" ejected from the Windoze laptop.
On the MacBook, both Disk Utility and DiskWarrior do not see the flash drive when it is in the USB port (either port). However, Apple System Profiler does recognize when it is plugged into the port. ASP returns the following information when the flash drive is in the high speed USB port:
"Flash Disk:
Product ID: 0x3234
Vendor ID: 0x1221
Version: 0.00
Serial Number: 10000000000003CF
Speed: Up to 480 Mb/sec
Manufacturer: USB2.0
Location ID: 0x24100000
Current Available (mA): 500
Current Required (mA): 100"
Anybody have any idea what is the cause of my problems with the flash Drive and how I can get the drive to mount? I don't think the problem is a function of my Apple hardware, as my USB ports on all my machines function with everything else USB which I have without problems. Thanks.

I know that, but I have USB in my older Macs, too, and besides, some of the most knowledgeable people are in these older forums!!
I've come to the conclusion that the drive may be defective, too, but I was just looking for some possible angle which I'd not already considered. I tried reformatting, but without the drive even being recognized, it isn't even possible to reformat. I can only get ASP to indicate that it is attached.
Thanks for your try!

USB External drive not showing in Finder, or on Desktop

I have two USB external drives from the same manufacturer. One is for regular storage, the second is for Time Machine and movies.
The first one shows everywhere, on the desktop, in finder and in Disk Utility.
The second drive shows in Disk Utility only. However, it is functioning fine with Time Machine. So it is mounted. I have tried several repairs, and it reports no fault found. So it is certainly functioning correctly, but a setting or error in the operating system is not allowing it to be viewed in finder, or on the desktop.
Any suggestions.

Correction: Title should be Firewire External drive not showing in Finder, or on Desktop.

Usb flash drive not mounting when inserted (SOLVED)

Hi,
I am (now) using fvwm-crystal with rox as my file manager and when i insert a usb flash drive in to a usb port nothing happens. I check /media and nothing is there. Yes i do have hal started at boot.
I reinstalled arch with xfce4.
Last edited by theringmaster (2007-10-09 20:28:42)

Well, there are the on-line manual pages:
man ivman
man IvmConfigActions.xml
man IvmConfigBase.xml
man IvmConfigConditions.xml
man IvmConfigProperties.xml
And there are examples in the default files (/etc/ivman/) provided with Ivman.
But that you probably already know. I'm not familiar with any other docs, except maybe tutorials on the net if you count them as docs

USB Flash Drive not detected after OS X Mountain Lion installed.

My MacBook Air 11 inch (Mid 2011) suddenly stopped detecting all my USB flash drives a week after upgraded to Mountain Lion.
I have a tiny 16GB USB flash drive (Sandisk Cruzer Fit), for daily work, that has never been unplugged from my MBA.
Everything was fine on Lion, and a week of Mountain Lion, until just when my MBA prompted me that my flash drive "was not ejected properly" after I re-opened the display/lid, or from sleep mode.
I thought I might have accidentally removed the flash drive unknowingly. So I tried re-plugging the flash drive, closed and re-opened the MBA lid, and the same error message "The disk was not ejected properly" occured. I repeated the steps for a few times (thinking my flash drive might be faulty) and at my last attempt, the flash drive was stopped detected. I tried several USB flash drives and external hard drives (of various brands) to both the USB ports of my MBA, only the external hard drives were detected (on both USB ports) and functioning. None of the flash drives was detected on either USB port.
The tested flash drives were plugged to another 13" MacBook (Unibody, Late 2008, OS X Lion) and they all worked fine.
I wonder if anyone faces the same problem, and solution(s) please?
Additional: OS X Mountain Lion re-installed and same problem occurs / No problem with OS X Lion.

I had the same issue after installing Mountain Lion from the App store. The issue is you are missing the IOUSBFamily.kext extension amongst others. The solution is to backup your macbook, then perform a clean install of Mountain Lion.
I had this done at the Apple Store and now everything is restored as well as performance speed being improved.
Note: When restoring your files (a clean install will delete all your files and applications), use the Migration Assistant.
I would recommend going to the Apple Store to do this because they can perform the clean install from a USB which is so much faster than the download form the App store.
Hope this helps.

USB Flash Drive not readable using 10.4.6 but is with 10.3.9

I noticed that a 32MB USB Flash Drive that used to work on my Powerbook when it was running 10.3.9 became unreadable when I upgraded to 10.4.6. This flash drive still works on my Dell WinXP system and I just tried booting the powerbook off a clone of my 10.3.9 setup (on an external firewire drive) and my flash drive works on that. So it appears to me that 10.4 has introduced a software bug that has disabled support for some flash drives. I will note that I also use a USB compact flash reader for transfering digital pictures and that does work under 10.4.6 so the problem does not affect all USB flash devices.
Is Apple aware of this? Are they working on it?
PB 1.5 GHz G4 15 Mac OS X (10.4.5)

Have you tried to open it in disk utility? Probably won't, but worth a shot. If not and you don't know who made it, then I'd say your out of luck. Probably time for a new Flash drive.
A 32meg Flash Drive today is very cheap if you can find one. You can get a 250 meg Flash drive for $20-$30. That's 8 times the storage you have now.

Usb HP v250w USB Flash Drive not working

My name is goutam kundu and my new bought usb HP v250w USB Flash Drive is not working and not formatting also.Please provide me some information or to send the service center.

I have the same problem too. (USB was working on windows XP but no longer does but windows 7 is fine. ) I logged a request on the HP website and got an email from [email protected]
they suggested I try (as below)
Please try to use our repair tools (Uifx-I or Uifx-II) that maybe could solve the problem.
The URL: http://www.pny.com.tw/index.php?cls=2&mode=download
If you still can’t working of the USB .
Then will to provide further solutions, thanks.
I eamiled {Personal Information Removed} back with
I"ve used your appicaitona dn it was successful on my windows 7 machine
I've then put the USB into my winxp machine (which I had it working in previously)
and it is not recognised
but it does come up in the computer management section as below
And that was a month ago and I haven't heard from them since. I then emaield them and have had no response. but looking around the internet a lot of complaints exist regarding the v250w.

USB Flash Drive not geting detected

I brought HP x705w 16GB USB Flash Drive in the month of October 2014. It is not getting detected in any computers i tried. I tried from DEVICE MANAGER but same problem NOT GETTING DETECTED. It is under warranty period.I visited HP care service near me (Aurangabad) but they are not helping me. Please give some help regarding this problem.

I had the same issue after installing Mountain Lion from the App store. The issue is you are missing the IOUSBFamily.kext extension amongst others. The solution is to backup your macbook, then perform a clean install of Mountain Lion.
I had this done at the Apple Store and now everything is restored as well as performance speed being improved.
Note: When restoring your files (a clean install will delete all your files and applications), use the Migration Assistant.
I would recommend going to the Apple Store to do this because they can perform the clean install from a USB which is so much faster than the download form the App store.
Hope this helps.

External USB Hard Drive not showing up on Time Capsule

Hi all,
I have a 500 Gb Time Capsule that used to be able to detect my external USB hard drives. I had to store my things for a while and have just started using the Time Capsule again. The TC works fine, however, the same USB external hard drives I used to connect to the TC are not showing up anymore :s They show up on the desktop when I connect them directly to my MacBook via USB. I have been through most of the file sharing options in Airport Utility and System Preferences but have not been able to solve this. I can't think of any settings that would have changed from when they were showing up in the past. Any help would be greatly appreciated. Thx

yosemite won't work with ntfs drives for some reason, i've had the same issue with my toshiba. i thought ok lemme buy another one, and transfer it over maybe it's a driver issue which i've tried over and over, apple support can't figure it out.
here's a simple fix, but the problem is i have an external where all my photography and video files are stored, so i can't access them right now and it's making my life ****.
http://guides.macrumors.com/Formatting_an_External_Device
that does work and make the drive mountable now, but problem being i can't obviously reformat the old drive and lose everything. once the new drive is formatted for mac i can't plug it into a pc to transfer the files from. which is the only problem now. but formatting the drive for mac only DOES work. but you're just screwed and not able to use it ntfs. hope the link helps SOME people.

USB flash drive not recognized by computer. Have tried all options of which I can think.

Okay. I have a Patriot S-Mini 32GB flash drive that my Windows 8.1 HP Slimline 400-434 is not recognizing. I believe it recognized it once, and has refused to do so since. My laptop (Windows 7 Toshiba) recognizes it just fine.
All other USB devices function perfectly on this computer. USB mouse/keyboard/USB Hub/Apple iPhone cable.
1. I have tried unplugging all other USB devices before trying this one. FAIL
2. I have gone to Device Management and the USB drive does not appear in the list. FAIL
3. I have uninstalled the USB Root Hubs and restarted the computer. FAIL
4. I have tried plugging the USB drive into the rear ports that plug directly into the motherboard. FAIL
5. I have updated the drivers, and have been unable to find a BIOS update as the link on the HP website downloads and says that it is incompatible for my computer. FAIL
...so what the bloody gorram heck do I do now?
This question was solved.
View Solution.

Okay, and in the most ridiculous way I have ever solved a technical problem...
The USB flash cannot be inserted ALL the way into the port. It has to be inserted slowly, so that the contacts line up.
I figured this out by trying to connect it into my USB hub and noticing that the red indicator light was going on and off as I inserted the USB drive, flickering on as I inserted it and then off once it was all the way in.
Weird. But hey. It works now.

USB flash drive not recognized on desktop or disk utility

I see a number of similar threads to this but nothing solves this problem. Any help will be greatly appreciated as I am about to go crazy!
I have 3 USB thumb drives that all worked 2 days ago - now only one does. I have tried all drives in multiple ports and the same result. I have restarted the iMac (2009 Yosemite) a number of times and the same result.
This came about attempting to create bootable USBs with each of these. I was struggling with the process on my mac so took 2 (brand new 16GB PNYs) to a PC created the live boot USBs and they booted fine on the PC (knowing this wouldn't boot my mac). I did however plug them into my mac and they were recognized. I finally found success creating a Ubuntu live boot with my old USB. With that success I wanted to try with one of the new USBs on the mac.
Here is what I did:
1. Using Disk Utility - Reformatted the drive 1 partition MS Dos FAT 32
2. In Terminal unmounted the drive and ran a dd command to copy the linux .img file successfully
3. Box came up saying drive not recognized and selected to ignore (this happened on my old one that still works also)
4. Ejected drive from terminal
5 Restarted mac and attempted to boot from USB without success.
After this the 2 new USBs were no longer recognized in any usb port while the other still is. They do not show on the desktop nor in Disk Utility. I checked them on the PC and they are still both recognized and showing the FAT 32 format.
Help please!

Thank you for the reply. I found some time to go through this process a number of times without success
Any other suggestions?

USB Hard Drive not showing up in AirPort Utility

I have been using this AirPort Extreme for over two years now and it's been working fine. I finally decided to buy a self-powered USB hard drive so I can share it over the network. However, after I unpacked the hard drive, connected it to my Mac and reformatted it to HFS+ Journaled and GUID. I plugged the hard drive into my AirPort Extreme's USB port and waited. I looked in my AirPort Utility and saw nothing in the disk list.
I spent hours searching online and discovered that I am not alone in this problem, although solutions are rare. I did try one solution where I hooked up the USB hard drive to a powered USB hub and the hub into AirPort Extreme. It actually worked once and after I rebooted everything, even though the hard drive still showed up in the disk list, no computers can connect to it. Although if I connect the hard drive directly to a Mac, it would still work perfectly.
Having a USB hub is not a long term solution not that it's working anymore anyway. I would appreciate any suggestions you may have, thanks!

Weilishu wrote:
Thanks for the response. However, I'm not sure what you mean.
So far my experience is far from "Just connect the external hard drive to the USB port on the back of your AirPort Extreme and — voilà".
did you read the support article Daddy linked ? it clearly says
JGG

USB flash drive not being recognized as a startup disk?

Hi everyone, I've been searching for similar questions but haven't found one that exactly matches my experience. So, I'm going to try and explain my issue in hopes that others may be able to help.
I'm trying to create a bootable flash drive from which I can install lion, and eventually Mountain Lion when it is released onto my main hard drive. My main reason for doing this is to have a way that I can perform a clean install of the operating system. Yes, I know I am old fashioned, but sometimes I prefer clean operating system installs rather than upgrading. In any case, I have downloaded the lion setup file from the Mac app store (Install Mac OS X Lion.app) and am following the directions given on this page to do this procedure. These directions are consistent with directions found on various other sources online. Having this file saved to my hard drive, I was able to find and extract the disk image file from the package InstallESD.dmg to another folder. Once extracted, I plugged in my flash drive and attempted to use disk utility to restore the disk image to my flash drive. I selected the dmg file as my source and the flash drive as the destination. I then clicked restore and was warned that all data on the flash drive would be erased while the disk image was restored to my flash drive. I was prepared for this, so I allowed the process to continue, and it appeared to proceed with no problem. When disk utility was finished, I did a quick look at my flash drive using finder and confirmed that it did in fact appear to contain a disk image of the .dmg file. Here's where things get interesting however.
When I go to system preferences and choose startup disk, my flash drive is not listed as an optional disk from which to boot, only my hard drive ("macintosh HD"). When I restart and hold down the option key, my flash drive is not listed as a startup disk either. I know that the non-intel based macs are not capable of booting from USB, but this is certainly not my issue as I have an intel macbook pro, mid 2009 model. My flash drive is about 4 or 5 years old; it is a PNY Technologies Attaché 16 gb flash drive. I have no trouble viewing and transferring files to and from the flash drive, the only issue is that my computer seems to refuse to recognize it as a startup disk. Are there certain flash drives which do not support booting? This would normally seem more like a computer issue rather than a flash drive issue, but most people seem to have no problem doing what I'm trying to do. Unfortunately I do not have another flash drive with which to test this, and I didn't really feel like buying another flash drive just to test this out if in fact this is not a flash drive issue. I am planning to upgrade to the macbook pro retina soon which of course does not have an optical drive, which is one of the reasons I would like to get this working. Can anyone think of something else I can try? Is it more likely an issue with the macbook pro or the flash drive?
Thanks in advance for any thoughts.

The format says Mac OS Extended. All of the settings were set during the disk image restore process. Even if I format the flash drive as extended journaled or some other format, all of these settings are reverted when I do the restore from the disk image. I will just copy all of the information that disk utility has so that you can see it.
Mount Point : /Volumes/Mac OS X Install ESD Capacity : 16.11 GB (16,106,110,976 Bytes) Format : Mac OS Extended Available : 12.3 GB (12,303,499,264 Bytes) Owners Enabled : Yes Used : 3.8 GB (3,802,611,712 Bytes) Number of Folders : 128 Number of Files : 876

USB Flash drive not showing on DT

Similar Messages

Maybe you are looking for