USB Flash Drive: Trying to recover space from "erase free space" problem. Finder shows no files i

Hi,
I have an 8gb flash usb drive. (recognizes 7.5gb)
I must have stop the operation or use erase free space orsomething stupid. Regardless, i just want to get it back to full capacity of7.5 gb. I think right now its only 6.2 gb. Finder shows no files inside thedrive. Let me know what i need to do. I try looking at different webpages aboutsparseimage file or 00 written in place of my missing 1.3 gb. But i dont knowhow to get it back. I am new to OSX, so please help me with clear instructions.Thanks

You can reformat it. Plug the drive in, launch Disk Utility (in your Alications> Utilities folder). Select the dove, theme erace/reformat it.
Just be carefully you accidentally don't erase any other external drives!

Similar Messages

A friend mailed me a flash drive with music on it from his pc... mostly wma files. How can I add these to my itunes library?

My friend created a BIG music file on his pc then saved it to a flash drive. It is mostly wma files.. how can I add this to itunes library?

Install Flip4Mac's WM Components (from their download page), required to play WMA in QuickTime, the Finder's preview column, and many other applications -- but not iTunes!
Open your WMA file in QuickTime Player (Pro version required), then save as reference movie.
Drag the newly created .mov file onto iTunes. Now you can play it as you would any other song.
Some metadata is copied to the QuickTime file, and you can edit/add tags in iTunes. Remember to keep the original WMA files in place, as your reference .mov files still point to them. If you don't mind one more conversion step, you can then liberate your WMAs within iTunes. Select your WMA songs in iTunes, go to the Advanced Menu, click Convert selection to MP3/AAC, then enjoy your music on the iPod.

"Removable Disk" shows up in Windows 7 even when USB Flash drive isn't there

I have a new windoz 7 computer, a couple of new sandisk cruzer 16bg flash drives. I removed the flash drives a couple of times without doing the "eject" thing. I never had a problem with your flashdrives on my xp machines. I know I was a bad boy, I just pulled the usb flash drive out. When I go to my computer folder it shows me my hard drives and its shows 5 Devices with Removable Storage ....one of which is the DVD RW Drive and 4 Removable Disk which are or were times when I plugged in my usb flash drive. They show 0 bytes, nothing is in any of the "Removable Disk" instances and I cannot remove them. I tried to delete, cut and I tried to eject but the Removable Disk icon stays there. How can I get rid of these safely, I tried rebooting a couple of times, they show up even without any usb devices plugged in. Thanks in advance Scott

I had this same problem. It turns out to be easy to resolve:Open the Windows 7 "Start" Menu, on the right shoose computer, in the new window that opens choose System Properties from the choices across the top of the window, now on the left side of the window choose Device Manager. In Device Manager expand the "Disk Drives" entry. You should see a listing of your hard disk drives and you'll also see "removable disk drives" with some additional idnetifying information. Select the offending entry and then right click and select "Uninstall" click "Okay" and the entry will be gone. Just be sure you're not uninstalling one of your hard disks. That's all there is to it. To prevent this issue in the future always "eject" the SD drives/sticks before you remove them. I hope this helps.

HP Mini 110-3520ca constantly restarts when trying to restore from usb flash drive

Hi,
I have a HP Mini 110-3520ca that I upgraded to Windows 8, but was having issues with freeze ups and shut downs so I decided to go back to Windows 7 Starter. When I tried to restore to factory default the files were corrupted and I couldn't restore from the recovery hard drive or my external back up files. I ordered the recovery USB flash drive from HP and tried to restore from it. It completes the Recovery Preparation and the Software Installation finishes, Windows starts to load, but Ithen it goes back to welcome to Recovery Manager. When I try to start Windows without the flash drive I get an error log that is below. Can someone tell me how to fix this or what needs to be done to get my Windows working again, any help would be greatly appreciated.
Carol.
Error Log:
Component: TDC Preinstall Diagnostic Tools for Windows 7 - TDC
Timing: Factory Update
This is not a Regional SKU
This is not an RCTO P2PP SKU
Error: Different LOC# detected:
Error: SKU number LOC# = 00
Error: REGSKU/OptionDashCode.ini value for ABC = 12
Error: SKU number incorrect for this LOC#=ABC.
Next Step: Please dash sku number with xxxxxx-12x
Next Step: Or use EEPROM and change LOC# in either SKU Number or CTO Localization Code
[17:16:38.37] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[17:16:38.38] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[17:16:38.38] ------------------------------------------------------------------------------------------
[17:13:54.75] Start BBOffline.cmd...
UPDrv=[C:]
[17:13:54.77] Set UIA Error Code to 951
[17:13:55.39] WinPE is 32bit.
[17:13:55.39] Starts [FixUps].
[17:13:55.41] ---------------------------------------------------------------------
[17:13:55.41] FixUps.cmd...
[17:13:55.41] create overall progress info...
[17:14:15.89] FixUps.cmd completed...
[17:14:15.89] ---------------------------------------------------------------------
[17:14:15.91] Starts [Tweaks for SSRD].
[17:14:15.92] ---------------------------------------------------------------------
[17:14:15.92] SSRD Tweaks to change user default locale...
[17:14:15.92] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[17:14:16.09] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US -image:C:".
[17:14:23.50] ---------------------------------------------------------------------
[17:14:23.50] Launch PININST.exe for Offline ...
[17:14:33.78] Starts [Sleep 10 sec].
[17:14:43.86] Starts [Create RStoneFUpdate.INI].
[17:15:20.91] Starts [create 1GB Pagefile for offline].
Volume in drive C has no label.
Volume Serial Number is 868D-C760
Directory of C:\system.sav\bbv
10/27/2014 05:15 PM 1,073,741,824 pagefile.sys
1 File(s) 1,073,741,824 bytes
0 Dir(s) 38,502,694,912 bytes free
[17:15:21.04] move boot.wim from FactoryUpdate to 2ndCap.
[17:15:21.10] Brand detection.
[17:15:21.80] ---------------------------------------------------------------------
[17:16:10.26] Start SysID Check...
[17:16:13.30] Start Option Code Checks...
SKU_DEF_COUNTRY=[39]
SKU_DEF_SYS_LOC=[fr-CA]
Reset country in administrator...
Reset country in Default user...
Reset System localed
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Reporting offline international settings.
Default system UI language : en-US
System locale : fr-CA
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : Canada (GEOID = 39)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
Installed language(s): en-US
Type : Fully localized language.
The operation completed successfully.
Updated System Locale info..
[17:16:27.37] Start PIN Tweaks...
[17:16:28.38] ---------------------------------------------------------------------
[17:16:28.40] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[17:16:28.40] ----------------------------------------
[17:16:28.40] Tweaks for OOBE's Unattend.xml
[17:16:28.40] to pick up the proper file...
[17:16:28.41] ----------------------------------------
[17:16:28.41] rename unattend.org to unattend.or_
[17:16:28.44] ----------------------------------------
[17:16:28.44] without Light Sensor..
[17:16:28.48] ----------------------------------------
[17:16:28.49] This is Restored image by SSRD [SSRD.flg]...
[17:16:28.51] ---------------------------------------------------------------------
[17:16:29.40] Start MIR Tweaks...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:30.43] [MIR Tweaks] ...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:31.44] Start Factory Update(s)...
[17:16:33.45] Start QFE Offline installation...
[17:16:38.13] PININST_OFF: PASSED...
[17:16:38.21] Type C:\System.sav\Logs\BBFindEr.log...
[17:16:38.23] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
Result=PASSED
[17:16:38.24] There was no QFE installation...
[17:16:38.24] Check FUList.log if there is duplicate Desc...
Couldn't access C:\System.sav\logs\FUList.log...
[17:16:38.35] No Duplicated Desc is found... PASSED.
[17:16:38.37] There was no Factory Update...

Hi @Savvy58
I did some further looking into that Error Log you posted. Basically, it means that is looking for a certain location that doesn't seem to be there. This could be a problem with the USB Recovery drive that you have. I would recommend that you contact HP. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

I tried to export photos from iMac to iPad using a USB flash drive. The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power. Any ideas of what type of USB flash drive I should use?

I tried to export photos from iMac to iPad using a USB flash drive. The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power. Any ideas of what type of USB flash drive I should use?

You can transfer photos outside of iTunes. I do it all the time. THat said, i have a 50/50 success rate with them. I'd avoid sandisk and kingston, their bundled software triggers the 'too much power' warning.
I've had mixed luck with lexar, some work, some don't.
I did have good luck with an older 4 gig geek squad one.
Look for drives without software on them, without bright LED lights and I haven't gotten any larger than 4 gig to work, but that may just be me.
For a less troublesome way? h onestly, I use a SD card that I've formatted with the DCIM folder. I've never had one of them trigger the 'too much power' warning. Just make sure they're not SDXC. those don't work.

Missing disk space after inserting a USB flash drive

Hello everyone..
I had a little problem with my Aluminum Macbook recently
It started on last sunday, when i pluged in a USB flash drive into my macbook, all of sudden my Macintosh disk free space is gone, from about 50gb left to about 1.5gb...
I ran the disk utility check and repair it fixed the problem, but then again whenever i plug in any usb flash drive(i tried several), it "steals" my free disk space and i have to run th repair programme again..
Any idea of this problem? is it any kind of virus or something else?
thanks

Hi,
*"a restart message."* If it looks like this...
That is called a kernel panic. Sounds like the USB card software/hardware is incompatible with your Mac.
Go here for help to Resolve Kernel Panics
Carolyn
Message was edited by: Carolyn Samit

Booting from hard disks 2TB - bootable USB flash drive GRUB (w/o OS)?

Hi,
I'm thinking about setting up a hardware supported RAID on a Debian-server (Proxmox) with lots of HDD-space. Therefore, my RAID-array will be >2TB, but I've read that the BIOS of the system will not be able to boot from such. Do you have a solution for this?
I was thinking about installing a bootable GRUB on an USB flash drive, which would then chainload the RAID's GRUB for booting. Is this even possible? I couldn't find any tutorial on how to create/boot only a (customizable) GRUB from the flash drive.
Another option would be to create multiple disks by the RAID-controller, but i'm not sure what happens with the chunks, if i would add another disk to the RAID to expand it.
A third solution, that came to my head, is simply installing Proxmox on a separate disk and detach it from the RAID. But in case of a disk failure, it would not be protected and i would rely on snapshot-backups - so i rather would not like to go with that solution.
Let me know what you think!
VR

I don't know about the answers to your issues, as I have never tried any disks that large. But it would probably be wise not to mention that you are trying to do this on a non Arch system, as now I am pretty sure you will not recieve the help you desire.
I don't mean to say that I encourage you to try to dupe our community into helping you with your debian system by not mentioning it. But it seems pretty silly to come to the Arch threads looking for debian support, even if it is a universal (os independent) issue.

MSI P965 Neo-F (MS-7235) problem booting from USB flash drive

Hi, all!
I was wondering if someone can help me. I am trying to install Windows 7 x64 on my 320GB HDD that is connected to my MSI P965 Neo-F (MS-7235) mobo (The CPU is a Core2Duo 6600 with 6GB of RAM). I created a bootable USB 8GB flash drive using Microsoft's "Windows 7 DVD USB Download Tool" and bootsect.exe (Needed to create a boot sector on the USB drive) from the MS store. I successfully tested the resulting bootable USB drive using freeware MobaLiveCD (Sorry, you'll have to Google "mobalivecd" since this forum doesn't seem to allow external links) running under Windows XP SP3 x86 (32bit). Under MobaLive's QEMU, Windows 7 setup loaded its files and produced an error message basically saying that it could not install Windows 7 x64 under an x86 OS (No surprise there since QEMU is emulating a 32bit processor - The point is that the bootable USB drive I created works).
I then went into my mobo's CMOS and under Advanced BIOS Features -> Boot Sequence -> 1st Boot Device, set the value to "USB-HDD" and rebooted my machine. The USB drive probably was not detected by the mobo under that setting because it proceeded to boot from my HDD which is the 2nd Boot Device. I repeated the same process using each one of the four USB ports in the rear of the mobo (I don't have the optional USB panel that the MSI users manual mentions) to no avail. I also tried setting the 1st Boot Device to "USB-FDD" and repeated the process for each USB port but the mobo still will not boot from the USB drive (It does not recognize it). When I set the 1st Boot Device to "USB-ZIP" and rebooted, the mobo hangs after "Verifying DMI Pool Data ..." which is no surprise since I am not using a USB ZIP drive but a USB flash drive. It appears that under that setting, it recognizes that there is a USB device attached but it is expecting a response (From a USB ZIP drive). I had no idea it would be this frustrating to boot from a USB flash drive! If anyone knows how to make this mobo boot from a USB flash drive, please let me know. Any assistance would be greatly appreciated. Thanks!

Quote from: RemusM on 12-June-14, 17:51:30
The P965 Neo motherboard is 8 years old, so don't expect miracles. .... You need to format the USB stick in the proper way. You may use this utility to do it: hxxp://www.prime-expert.com/flashboot/ Also, it's a good idea to use the first (USB0) connector (controlled by Intel ICH8) for the USB flash drive. Good luck.
Thank You for your fast response, RemusM!
I'm not looking for a miracle. I'm just looking for a mobo that does what it is supposed to do: Allow me to boot from a USB flash drive (I don't think that is too much to ask for even from a board that was made in 2006)!
Thanks for recommending FlashBoot. I see under their "Why FlashBoot" section that it "... does not shift to user the burden of choice between "USB-ZIP" and "USB-HDD" at format time and proper BIOS setup at boot time. ... and every USB disk is formatted in such way that it will work in every environment properly, regardless of current BIOS setting.", so I will give it a try and let you know about the results afterwards.

Move a big file from a mac system to a windows 8 laptop usb usb flash drive

Hello i am using a 32 gb flash drive to copy a 10gb file from mac os x to my flash drive. Then i want to insert that flash drive to my windows 8 pc and store it there.
I cant use a network connection to transfer files because i dont have a ethernet cable or an network connection yet. So i must use a smart procedure for making my mac communicate with my pc at home. I cant use any other types of sharing methods except for a usb flash drive. So i know that the mac cannot detect NTFS filesystems and i cant use FAT32 even though mac recognizes it because FAT 32 is unable to store large files abotu 10GB of size. Now i have to use i think ext3 or ext4 or also HFS but when i successfully copy the file from mac to flash drive then insert it into my pc, the windows 8 OS will not detect the windows pc because i dont think windows is made to detect these filesystems by default.
So i have tried using, HFS explorer and ext2/ext3/ext4 volume manager and ext2exploer or GPARTED live cd's latest version's copy and paste functions but they seem to not work propely and there is a problem, i cannot see any flash drive in HFS explorer even though my drive is formatted as hfs.
So i need a program that can detect HFS or ext3/4 formatted flash drives and is able to copy a file from there straight to my windows 8 NTFS hard drive or a folder in it.
I have checked my firewall settings and defense settings. I am the administrator of my pc and i have even removed the windows password and the mac one but still i get lots of issus JUST to copy a file between a pc and a mac. Remmember that i have to copy files FROM a mac system running snow leopard to my windows 8 pc not the OTHER WAY were i have to copy from the windows to a mac.
Please tell me as much as possable about software out there and tell me software that costs money. I am able to buy any good software for doing this.
Thanks in advance.
raghav

Take the flash drive to the PC and format it as exFAT.
(95473)

USB Flash Drive no longer shows on Desktop, it does appear in disk utility. I recently upgraded to 10.8 from 10.6 on both iMac and Macbook and the drive does the same on both.

I updated my Snow Leopard to Mountain Lion and have had only minor issues with some software but I plugged in a USB flash drive and went to format it, it now appears only in disk utility and not on the desktop. I have tried restarting and reseting with the drive in and out, I tried it into my macbook and it does exactly the same there. I can't do anything in Disk Utility so can't access it in any way and it says errors if I try to eject it from DU. I'm not normally stumped but I can't figure this out at all. I'm hoping that someone here could give me an idea that I haven't thought of as it's a large Flash Drive and I really would like to keep using it.
Thanks in advance for any help anyone can offer.

If it has the same (bad) behavior on two different systems then there is a very good chance that the drive is toast.
BTW you'll get better response to your questions if the question actually reflects the problem you are having. In this case it would have been better to say you couldn't access the drive rather then that it doesn't show on the desktop.
regards

Boot camp install from USB Flash Drive

Hi Folks,
I recently purchased a new Macbook Air. It has 10.8.3.
I used the Boot Camp Assistant to set up the computer for Boot Camp. It went through all the steps: First, it formatted my USB Flash Drive. Next, it copied Windows installer crap from the my ISO to the USB Drive. Next, it downloaded the Apple Drivers and put them on the USB drive. Next, it restarted in order to boot from the USB drive.
This is where I hit a wall. The computer will not bpt from the Flash Drive. It is as if the control panel has set the startup disk to "BOOTCAMP" instead of the flash drive. So when the computer restarts, it just says "No bootable device - insert boot disk and press any key."
How can I get it to boot from the flash drive?
Thanks In Advance
Andy
Corrected the error message to exact phrase.

Hmmm... interesting... My sites I found suggested otherwise. I tried three diferent brands of jump drives and none of them actually booted the Macbook Air. The Boot Camp Assistant used them all just fine, but booting was the issue. Glad you got it to work. Would you mind posting what brand you used so other reading this thread in the future could learn?
Also, were you just using the BCA or, did you do some other process to make it bootable first? Since the BCA formats the drive, I would think any process done ahead of time would be thwarted (as mine were).
Thanks!

Trying to format a new USB flash drive so it will work on both a Mac and PC

I have a brand new Sandisk USB flash drive that I am trying to copy movie files onto from my Mac's hard drive. For some reason I can copy one of the movie files but not the other, even though they are both Quicktime (.mov) files. In doing some research, it seems the one file will not copy/paste likely because it is over 4 GB in size and the FAT32 filing system on the USB drive prevents files in excess of this size to be copied and pasted.
My question to anyone who can help me is: How can I get files over 4 GB onto and off of this USB drive AND be able to use it for both Mac and PC computers?
Thanks for any advice.
Shaun

If I format the USB stick on my Mac as exFAT, will my client who´s most likely using a PC be able to screen it tomorrow morning...??
exFAT would only be an issue if they were running a version of Windows older than XP. If it is XP, they would need to install the free exFAT update before being able to access the drive.

How do you save videos from iPhoto to a USB flash drive?, How do you save videos from iPhoto to a USB flash drive?

Hello! Could someone please help me? I am trying to save vidoes from iPhoto to a USB flash drive. After I export them, I open my flash drive to play them back and they are all zero seconds long in Quick Time Player. What am I doing wrong?

How are you exporting?
Try to export using the "File" menu and select "Kind > Original".
Then drag the exported video file to your USB flash drive.
This user tip explains the export options:
https://discussions.apple.com/community/ilife/iphoto?view=documents

How do you save videos from iPhoto to a USB flash drive?

Hello! Could someone please help me? I am trying to save vidoes from iPhoto to a USB flash drive. After I export them, I open my flash drive to play them back and they are all zero seconds long in Quick Time Player. What am I doing wrong?

Better to post your topic in the designated iPhoto community > iPhoto: iLife: Apple Support Communities
That way more iPhoto users can see and respond to your topic.

Mount a USB flash drive from a shell

I am about six months new to Linux; I have installed my first arch system but not yet installed a desktop environment. I am trying to mount a USB flash drive from the shell but I am not having much luck. I have tried following the instructions in the archwiki, http://wiki.archlinux.org/index.php/USB_Storage_Devices. I am having a problem with the following command:
mount -t vfat /dev/sda1 /mnt/usbstick
I get an error message saying that the mount point does not exist. I have in the /mnt directory the following:
cd cdrom dvd fd0 f1
(I am not sure what fd0 and fl are, if somebody could please tell me I would appreciate it. Also I do not have a DVD-ROM on my computer is the dvd listed by default or do I have a package installed I do not need?) I did some searching online and came across the following site, http://linuxcommando.blogspot.com/2007/ … -from.html. I followed the instructions to identify the correct partition name corresponding to the USB drive by running the following command:
grep SCSI /var/log/messages.log
and I get the following results:
Dec 30 22:16:17 morgan-desktop scsi2 : SCSI emulation for USB Mass Storage divices
Dec 30 22:16:22 morgan-desktop sd 2:0:0:0: [sdb] Attached SCSI removable disk
The next steps in the instructions are to mount the partition to the existing mount point (directory) by using the following command.
mkdir -p /mnt/myusb
mount -t vfat -o rw,users /dev/sda1 /mnt/myusb
This is where I am having a problem, I do not understand the results and how to proceed to the next step, please help me.
One other small question what is the best command to shut down the computer as a normal user?
Thank you
Morgan Smith

Ok, Lots of different advice here, let's see if I can explain it all together, and clear up a few bits...
I'll try to explain why I'm saying what I am, it doesn't matter if you don't follow it all, commands are below.
You are on the right lines here, but a few things missing. Firstly, to mount the USB stick you are using the correct command, but the locations are a problem. The command is "mount -t type what/to/mount where/to/mount". You can find out more about the mount command with "mount --help" or "man mount"
You have correctly identified type as vfat - this means the pen is formated as FAT.
To find out what to mount, you can check /var/log/messages.log, the second command you posted searches trough that file and prints out lines including the phrase SCSI, and the result tells you that a usb storage device had been attached as sdb, so the correct device is /dev/sdb1. Storage devices are named sda sdb sdc etc in the order they are attached, and the numbers refer to the partitions on the disk.
You can mount it anywhere you want, as any existing directory, but the one you tried to use /mnt/usbstick doesn't exist, so create it, using mkdir.
The commands you need therefore are:
mkdir /mnt/usbstick
mount -t vfat /dev/sdb1 /mnt/usbstick
This will work as root. There is also, as byte said, a program called pmount (which you can get with pacman -S pmount) which works the same way for a standard user.
Finally, there are also a number of tools like HAL which can be used to automate the process.
As for shutting down, as has been said you must be root or in the power group, then you can use 'halt' 'poweroff' 'reboot' or 'shutdown'. All have slightly different effects, and poweroff is probably the easiest.
Hope this helps
Jack

USB Flash Drive: Trying to recover space from "erase free space" problem. Finder shows no files i

Similar Messages

Maybe you are looking for