USB flash memory stick - 2 drives mount!

Hi,
When i insert my new "integral" ice flash drive, 2 drives mount on my desktop. Even disk utility sees them as different disks rather than partitions.
I only want one! Any clues?

Aha, a proper Eureka moment.
Thanks for the tip, and it does exactly what I hoped it would.Thank you, I knew it had to be a simple solution ( too simple for me to work out though ! )

Similar Messages

Cannot share a volume from a USB flash memory stick

Hi,
I had a small USB disk drive hanging off my iMac for years. At one point I shared it and was able to access it from other Macs at my house.
Recently the drive began to fail, and since it was a small disk, I decided to replace it with a 128GB flash memory stick instead of a mechanical hard drive. I formatted the memory stick as Mac OS Extended (Journaled), which is the same way the hard drive is formatted, and I copied all my files onto it.
The new volume works fine on my iMac, but I can't share it. In the Settings, if I try to add the drive as a share, nothing shows up. I can share individual folders on the drive, and they appear to be shared, but they are never visible on any of the remote computers. (Everything is running Mountain Lion).
I can't figure out what could be causing this. I checked and repaired the volume several times, it seems fine, it just won't share.
Thanks,
Frank

Aha, a proper Eureka moment.
Thanks for the tip, and it does exactly what I hoped it would.Thank you, I knew it had to be a simple solution ( too simple for me to work out though ! )

Extending the ram with a usb flash memory stick

I heard that it is possible to use a memory usb stick to extend the ram memory in the mac, it this true and how do I do this? I have a 4 gb flash stick and it would be great if I could just plug it in and have more ram!
André

Not possible. A USB memory stick can be used to park files and move them between computers, but that's about it. These devices also operate at a much, much slower speed than built-in memory, so even if this were possible, it would be painfully slow.

Satellite P50-A09M - problems reading USB flash memory sticks

Getting USB sticks as showing up as a empty drive, if you click on it the File Explorer locks up. A reboot fixed it but their are other problems.
I did a System backup on 3 DVD's and seems to run OK, but I thought may be to try a USB2 stick.
Toshiba Brand no good just locked up the Stick had to use the USB stick format utile on my Main W7/32 PC to recover it.
I even tried again with a Sandisk USB3 stick, did the same corrupted the stick having constant problem on reading from USB ports. I tried a 1TB hard drive just locked up the File Explorer, but a reboot was OK..
So have since did a system recovery and then a System backup the USB sticks works no errors, but no software has been loaded..
This is a 5 day old Satellite P50-A09M
I am trying it again with all the Windows updates..

USB Sticks these are 3 good brands
One a Toshiba, the USB 3 Hard drive is a USB 3 Powered Model Imation Apollo M100 Portable Hard Drive
These USB sticks did not show correctly no Size and clicking on the USB Drive, caused the Laptop to lockup, a reboot fixed that problem and the same with the USB3 hard drive.
When I tried to do a system backup it scrambled 2 USB sticks, after a system recovery it worked ok on the same 2 USB sticks.
On my Home made PC yes I am a retired Computer Eng, the 2 scrambled sticks would not format they showed up as being unformatted, I had to use the HP USB format utile to format them.
This PC is about 2 years old running Windows pro 7/32
The Laptop is still have a bit of a problem with a 8GB Lexar USB2 stick the activity Led was flashing all the time seems like the USB port was seeing the stick as being in then out, plugged it in the USB3 port and it was OK.
Been using these USB sticks to transfer data from the Main PC to the laptop.
Sorry for the delay in replying but we have big problems in logging on here in NZ and not just me, I set myself as a new user and it logged me on as my old user, do you have any clues on getting around this as a mate has the same problem.
Thanks.

USB flash memory: "application not found" error

When recently trying to use a USB flash memory stick I was getting an "f:\ application not found" error. I tried all kinds of fixes from Microsoft. Turns out it was caused by Lightroom.
Since the memory stick had photos on it, my computer's Autoplay was trying to launch Lightroom. Problem is, Lightroom is listed as "Lightroom 4.0 64" in the Autoplay menu. I have Lightroom 4.4. As far as I can tell, there's no way I can fix the incorrect "Lightroom 4.0 64" listing. The solution is to remove Lightroom from any Autoplay options.
This is the second such problem I've had with Lightroom. The previous problem was right clicking on a photo file and trying to use the "open with" menu. It worked fine when I had Lightroom 4.3. After updating to Lightroom 4.4, it didn't work. Another Lightroom user found a workaround, which was to rename the Lightroom 4.4 folder back to Lightroom 4.3.
These are both lazy Adobe oversights. You have to realize all the Windows functions that will be affected with an update and make sure they are updated as well. I spent half a day solving this latest USB flash memory error. Get your updating act together.

You don't mention your OS or which version of Outlook you're using.
For Windows, this may be helpful:
http://www.winhelponline.com/articles/236/1/Unable-to-open-PDF-attachments-from-Windows-Ma il.html
Noel

Exporting Music From iTunes To Flash/Memory Stick

So I did a search and the most relevant thread I could find is this one: http://discussions.apple.com/thread.jspa?messageID=5923574&#5923574
Basically I'm going on a road trip with a friend who has a stereo head unit with a USB port, so you can plug in flash/memory sticks/cards (I'm spacing on the true terminology here). He asked if I bring along some tunes.
So I have a 2 gig stick that I want to load up.
Is it as easy as that thread above says? Make sure the tunes are in mp3 format, highlight, copy then paste?
Or is there an easier/better way to do this?
Thanks in advanced.
MM

If the stereo will play AAC, you can do that.
If it only accepts MP3, you will need to convert them.
iTunes prefs -> Advanced - Importing.
Set it to MP3.
Create a new playlist and add all the songs you want to convert.
Select all the songs.
Go to menu Advanced -> Convert selection to MP3.
When it's done, delete the playlist you just created.
Create a new Smart playlist;
Match rule;
Date created is today
Kind contains MPEG Audio
This should show everything you just converted.
Select all the songs and drag to the flash drive.

USB Flash Memory Problem with Windows printing...need advice

I recently traveled from the US to the UK with my G4 12" powerbook. In order to print a document (MS PowerPoint), I had to copy the document to my flash memory stick (AVB is the brand which I bought because it's skinny enough to also allow me to use a mouse), put it into a Windows machine's USB port in the hotel business center, and then print from that file.
I had all kinds of problems, where the file would disappear from the memory stick, (and in one heart-stopping moment, from my PB desktop!). I finally borrowed another stick and got the job done, but I don't want to go through that again.
Amy idea as to what happened, or more to the point: What is the "best" brand/type of memory stick to go between Macs (I'm on Tiger)...and Windows? (I only need a 256M capacity; I have small files, but don't mind going bigger if it's more reliable).
Or should I give up on a stick and buy a USB portable hard drive? Or is there some other, better, more reliable solution?
Any suggestions would be very much appreciated.
Thanks, Writerdog

I think you're right it sounds like an electrical sound
if you want to change the motherboard like sea dog said look at the MSI catalog to find the one that suits you the most >>HERE<<
personnally I don't know the prices ine Danemark (I buy everything in France) so if you have a link i can try to help,
if it was up to me would take the Z77A-G45-Gaming or GD65-Gaming but if you prefer the normal series i would say GD-55 or GD65 it depends on the prices
PS: for ethical matters i can't speak about other companies in the MSI Forum

Cannot play .avi files from USB Flash Memory UHYB-064GH

Hi,
I have recently bought a 64gb Toshiba Flash Memory Drive (Stick). It's model UHYB-064GH.
Straight out of the box I plugged the USB drive into my Windows PC.
I'm running Windows Vista.
I tried to transfer a number of .avi video files to the device, taking up about 10gb of space.
I tried running the files (using VLC player) straight from the flash drive. Most of the files wouldn't play.
Only one did but it only played the first 8 seconds of a near 2 hour film.
The counter in the corner only showed the film to be 8 seconds long?!
However the properties section of the file confirmed it was a 1.6gb, 2 hour film...?
I transferred the same video files to a different (old) drive I have and found that it worked fine.
The drive is a FAT32 one.
I don't really know much about these things so would be grateful for any advice
Tom

Try to format the USB flash memory in NTFS format.
The FAT file format supports files up to 4GB but the NTFS format supports bigger sizes.

K8N Neo PL and USB flash memory

This is a bit odd, not really sure what is happening. I have tried a couple of different flash memory readers, as well as flash memory sticks, and the USB does not recognize them. I can plug in scanners, mice, etc. and they all work perfectly. It is just when I use some type of memory device that is plugged in by the USB port do I have problems.
Is anyone else having this problem? I have enabled/disabled the USB using rev. 1.1 and 2.0, enabled and disabled the USB Keyboard/Storage setting, and I have re-installed the WinXP drivers that handle this (as well as try to update those very same drivers).
Here are my specs:
AMD A64 3400+
1 GB Mushkin PC3200 Level 2
120 GB SATA Seagate Drive
Toshiba DVD-ROM
Sapphire X800 Pro
CL Audigy 2 ZS
WinXP Pro SP1
NVIDIA 4.24 Unified
DX 9.0b

I fixed my own problem. On searching a few other forums I read that the problem actually comes from the front panel USB connectors. Most of these connectors have 2 ground wires coming off of USB 1, and to get everything to work properly only one of the grounds should be plugged in. The farthest ground (in my case the wire was brown) should be unplugged, so that only 4 wires are plugged into the USB pins.

Unable to boot from my USB Flash Memory Device

Hi there,
I recently purchased a macbook pro with the lion 10.7.2 firmware.
I am experiencing problems with my USB Flash memory as when i plug it in it comes up fine on the desktop and i can browse it. The problem is that when i open up an application such as Adobe Fireworks or Netbeans (Java programming) and try and access files from my USB flash drive, my drive does not appear on the list/menu, it only comes up with my macbook pro documents etc.
I have asked friends with Mac's and they tell me they do not experience this problem. Please can you help me whether it is a problem with my settings or any other issues.
Thank you.

Nope, I dont recieve any massages at all. It just doesnt appear.
Also usually you can drag a file into an application, for example drag an image into photoshop in order to open that image up but this does not work either.

I've bought a new USB flash memory. I plugged it in the USB port then a message come out: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.... Please help...

I don't know what to do. I plugged that USB in both ports but the same message came out. I charged my laptop and the same thing happened again. The surprising thing is that I tried plugging the USB in my cousins laptop (Macbook Pro) and it worked!!! but not with mine. The USB flash memory made by PNY. Please help...

There are two types of USB 2 devices - low power which consume 100 milliamperes or less from the USB bus and high power which consume up to 500 milliamperes. Your flash drive is probably a high power device and is overloading the USB bus of your computer. (Some notebooks can support only low power USB devices.)
I know that my MBP's USB ports support high power devices but I've come across reports that not all high power devices will work on the MBA and that might be the case for your flash drive. My guess is it has a large capacity? 32GB or more?

Create bootable usb flash memory

Hi,
ı have s10-3 ideapad, there is no dvd drive, how can ı create bootable usb flash memory?

Hi and welcome,
...you need a second computer to prepare .
a huge amount of sites describe that "how to prepare usb-drive" ...i picked from net examples for all systems ...
install windows from winsetupfromusb for XP
for Windows 7 USB drive Windows 7
for Ubuntu Unetbootin
and last but not least here in our knowledgebase for XP
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Booting from USB Flash Memory Card Reader on RS480M2-IL (Test Results)

I just completed testing my USB Flash Memory Card Reader (see profile) as a boot device and wanted to provide feedback to the Forum.
A UBS Flash card will show-up on the Advanced Bios Features menu, Hard Disk Boot Priority list, when a Flash card is physically present in a card slot. It showed as "USB-HDD0 : AFT PRO -8MX CF 0" with a 256MB Compact Flash (CF) card for my test. Using the enter key on the Hard Disk Boot Priority list allows for ordering priority, which was necessary to place the CF Drive before my real Hard Drive for the card to boot. When the card is removed, it drops from the list.
I initialized my CF card as a DOS system disk using HP's USB Disk Storage Format Tool v2.0.6 for the test.
Since it is recognized as a Hard Drive, it boots as the C: drive, not A/B Floppy alternative.
I also ran a quick test to see if XP Pro Setup would see the drive. It does show as my D: drive partitioned FAT. Too small (256MB) obviously for XP Pro install, but it does present opportunity for larger size flash modules. My Flash Reader actually has 4 different disk functions/slot groups, so XP Setup acknowledge the presents of those empty three slot groups as "Unknown Disk" on the drive list.
I hope the information is useful for anyone planning a build or looking for alternative boot methodolgy with the board.
This board just gets better and better.
Danno

So with a nice size flash memory u could start your box with a key drive and lock up your computer when you leave it unattended.

Toshiba 40SL733g - How to play video files from USB flash memory

When I plug my USB flash memory in USB port, Media Player menu shows up with two options : Photos and Settings.
How do I make my TV recognize and play video files from USB flash memory?
Flash is on FAT32.
I have tried to play avi, mp4 and mkv files but nothing happens. It looks like flash is empty.
Could you please help me solve this problem.
Thanks!

bzunic, have you updated the firmware for your model?.
With my own set, (32RL900A), the instruction manual said that certain buttons on the remote control were "unused", however, after the first firmware update, the previously "unused" buttons were used, (In our case, Time Shift, Record, and so on).
The reason I talk about this is, these features became available after a firmware upgrade, and were not mentioned in the user manual, in our case, and a later download of the instruction manual for our model actually gave the instructions for the use of these features, which were shown as "not available", in the original instruction manual supplied with the TV, but became available after the firmware upgrade.
Let us know how it all works out ............
donhe7

Issue with usb flash and removable hard drives in Lion. (also an install tip)

Having an issue with my usb flash and removable hard drives. I plug them in and Lion does not display all my files/folders, I take it out and plug it into my snow leopard machine and all the files/folders are there, does anyone have this issue?
It does it on my macbook pro which was a snow leopard upgrade to Lion and it does it on my macbook which was a clean install of Lion via a bootable flash drive.
The computers both work great in all other aspects, so there were no errors on installation. It's plain and simple, some files/folders are not showing up that are present on the drives and viewable on all other non-lion OS's mac and PC.
Also a word on installs, I highly suggest doing a clean install (delete and reformat drive them install Lion vs a snow leopard ugrade) my machine that was a clean install (macbook) runs 50% faster and smoother than the upgraded one (macbook pro).

Yes, you can use your backup disk drives in the manner you describe, but Apple provides conflicting information on the subject.
From Mac Basics: Time Machine
Time Machine can’t backup to an external drive that's connected to an AirPort Extreme, Time Capsule, or a drive formatted for Microsoft Windows ...
From Time Machine doesn't back up to AirPort Extreme AirPort Disks
Time Machine in Mac OS X v10.5 or later can be used to back up to many kinds of Mac OS Extended-formatted drives, but you cannot choose an AirPort Extreme 802.11n's AirPort Disk as a Time Machine backup volume.
However, you can choose Time Capsule AirPort Disks or internal disks as a Time Machine backup volume.
They have yet to resolve this discrepancy.
All other available technical details regarding Time Machine's use seem to indicate that a USB HD connected to Time Capsule should meet Time Machine's requirements. For what it's worth I have been using an external HDD connected to the Time Capsule's USB port and it seems to function just fine.

USB flash memory stick - 2 drives mount!

Similar Messages

Maybe you are looking for