Usb for 1510 all-in-one printer causing problems with it accepting print jobs

I am having trouble downloading the driver for a 1512 all-in-one printer. It was working for about a week and it is not working now. I loaded the suggested driver 1510 all-in-one driver but when I get to plugging in the usb from my Windows 7 laptop to the printer, it does not feel it is connected. I can print items that I scan but am puzzled how it will not print. The only thing I have deduced is I need a new usb cable. I bought on ebay as I've always had good luck with hp products.
Sparky325

I decided that in spite of the fact that it had previously printed, I got another USB cord and used that and then the printer worked. The one I received with the printer must have been too loose to make a connection. This one feels snug when i need to print from my laptop. Thanks for your help. Sparky 325

Similar Messages

HP Photosmart C7280 All in One installation problems with windows 8.1

Hi,
I have a HP Photosmart C7280 All in One printer which was working fine on wifi with Windows 8. A few days ago I got the prompt to upgrade to 8.1. Following this the printer would not work at all, and I got prompt/warning message to re-install the printer software. So I went to the control panel and removed all the old HP software, and tried to re-install the latest one from the HP site...to no avail.
I have tried doing this a number of ways - manual download, downloading the HP software that determines what software is required, then downloads it for you....
It seems to start unpacking ok, but then gets stuck on 'Checking System' and never progresses to do anything else. Help!
This question was solved.
View Solution.

Hello Cam77,
Welcome to the HP Support Forums. I see that you are encountering difficulties installing your Photosmart C7280 printer after upgrading your computer to Windows 8.1.
I have included the Windows 8: The Progress Bar on the Software Installation Stops or Stalls document. It will walk you through the steps to get the printer installed.
Please let me know if you encounter any difficulties while doing the above. If you do, please let me know at what step things went awry and what any error messages said. Please also include how you have the printer connected (USB cable, ethernet, or wireless). Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Photoshop Elements 9 Printer Driver Problems with Canon MP600 printer

I'm having problems using my Canon MP600 printer with Photoshop Elements 9 with regard to the paper allocation. The MP600 has 2 paper trays and for some reason when using Elements it prefers you to use the top loading (auto sheet feeder) method all the time. For space reasons I need to use the bottom cassette. When you initially go into the settings for the printer within elements you can choose the cassette and paper type etc no problem and make a print. When you go back in to do another print it changes the setting back to auto sheet feeder so you have to change it back again which is winding me up! I have got the latest drivers for the printer and they are set up to how I would like the printer to work but Elements changes some of those settings for some reason. Does anyone know a way of fixing this please ?? When I'm not in Photoshop if I go to print something from the web it performs perfectly so I can only assume its Elements thats changing the settings.
Also when I print small thumbnail sized pictures on an A4 sheet of paper to test what the photo colour will look like when I go back into the print menu it puts the thumnail picture back in the center of the sheet of A4 rather than leaving it where it was, so then you have to put in the top and sideways measurements again to carry on ! The last version of Photoshop I had never did that. Does anyone know had to solve that problem ?? Any thoughts on the above problems would be gratefully recieved !

Thank you for your suggestions. I downloaded a more recent version of Twain, but this didn't help. I also tried closing and opening Photo Shop and restarting my computer without success. Reinstalling Photo Shop sounds like a very promising solution, but I'm not sure I will do it. In the meantime I can scan items using a printer program. These scans open in Photo Shop. It is an extra step.

Problem with Photoshop Elements Printing

I have been using Photoshop Elements for a couple of years now and know it pretty well. Today while attempting to print, a strange problem came up: After going through the protocol to make a print, just before the image prints PE does a very fast auto correction that basically ruins all the color correction I have made on the image. How do I disable this function?

Hi and thanks for your reply. I checked the settings under "Print", "More Options", then "Color Management" and it only has "Print Space", none of the three options that you said I should have. Am I looking in the wrong place?
Date: Mon, 3 Sep 2012 11:14:57 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Photoshop Elements Printing
    Re: Problem with Photoshop Elements Printing
    created by 99jon in Photoshop Elements - View the full discussion
Check your color management by clicking More Options in the print dialog There are basically three options:1) Printer Manages Color2) Elements Manages color3) No color Management Make sure everything is consistent e.g. if you choose Elements manages color make sure color management is switched off in the print driver.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4669848#4669848
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4669848#4669848. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Is it possible to connect HP DESKJET 1510 All-in-One series Wireless printer without USB cable?

my mom recently bought me the HP DESKJET 1510 All-in-One series so i have an at home printer for school work. but when we bought it we did not know there was a certain USB that had to connect to the printer. so we bought the wrong one. now i have a project due and i cannot print. we have a small USB that fits it but its hard to connect it to the computer and printer because its so small. so if we can have it sent to the printer without the USB that would be perfect!

Hi,
No, in many cases printers won't come with USB cables. You need a cable which is similar to the following one:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My brand new HP Deskjet 1510 all-in-one series Cant print

This new HP 1510 All in one series that I just bought is not consistent in printing and most of the times it picks the paper and makes a bipping sound and then stops. It will then give a printing error report and spit out the paper with no print. This is driving me crazy. I have uninstalled and installed a couple of times but the problem persists. At times it prints and at times it doesn't. you can barely tell when it is going to print and most of the times it doesnt. I really need suggestions please

Hello there @Drawingston , welcome to the forums
I read your post about your Deskjet 1510 not printing consistently from your Windows 8.1 system, and when it prints, the pages are blank. I will surely try to help you!
I would suggest that you try a few things, they are:
Run the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. Please send me the results in a screen shot or write them in a response.
Try a different USB cable that runs directly from the back of the printer, to the PC.
Click this guide and try cleaning the paper rollers: The Printer Does Not Pick Up or Feed Paper
Reset the printer and make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors.
Try printing again from more than one program.
Let me know all of the results
Good luck!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Paper feed out of sync on HP PSC 1510 All-in-One Printer Scanner

Paper feed out of sync on HP PSC 1510 All-in-One(SN MY59SD224W0498). Goes to flashing orange light. With Vista Home Premium 32-bit, 6.0.6002 Service Pack 2 Build 6002. USB connection to HP Pavilion GU658AA-ABU a6250.uk .
After cleaning ink drip tray including removing & refitting the small panel in the base towards the rear RHS of the printer and also Super Glueing a small wedge of timber to close split shaft bearing for rear print feed rollers - looking from rear with clean out door removed this is at the LHS where the cogs are - paper feed is out of sync. When turned on with paper in feed tray printer draws in paper until about 2" (5cm) of paper protrudes from delivery slot & then stops. Paper jam is indicated by flashing orange light. On pressing Cancel/Resume, paper is expelled & another sheet taken in with the same results. Have turned off & restarted. Have moved cartridge cleaner tray right from front to rear & tested & then brought it right forward again & tested. Have turned off & unplugged power & USB & restarted after more than 30 minutes. Have uninstalled driver & downloaded & installed anew. Downloaded & ran the HP Print Diagnostic Utility. All to no avail. Any suggestions anyone?

Hi there nobster,
This article should cover the blinking light. However, I suspect the printer requires servicing.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How do I scan on my HP deskjet 1510 all in one series? Theres' no button on the printer?

there's no scan button on my hp deskjet 1510 all in one series printer? how do I scan?

Hello,
If you go to the following location and identify what PC operating system you are using, it provides instructions on how to scan to your computer:
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=26675&tmp_task=useCategory&cc=us&dlc...
I work for HP, However, I am speaking for myself and not for HP

Looking for a for an all-in-one printer that is compatible with greeting card programs...

looking for a for an all-in-one printer that is compatible with greeting card programs...my original one was an HP PSC 1510...replaced it with a Deskjet 1050 & it does not work...any suggestions?

I bought an epson xp650 a couple of months ago and cannot fault it. It does everything I require and it is the wifi model so I can print directly from my ipad/iphone. Not sure if you are asking about the colour of the unit or just to be able to print black and white, Obviously all printers will print black and white but just to give you a little more info the printer I bought is the white version and it looks really nice sat next to my imac 27''
Hope this helps.

HP 1510 all in one printer will not install

I have just purchased a new 1510 all in one printer.
I have installed the printer software from the CD supplied.
However when I try to run the printer HP assitant comes on with run time error.
I have tried to uninstall and reinstall the printer many times but with the same result

Hello @aka6812 ,
Thanks a lot for the question, now lets get you an answer!
I see you are experiencing a "run time error" when trying to run your printer assistant after installing the HP 1510 software drivers.
Here is a description of what a run time error is. Microsoft Run Time Error
This might be because you have an outdated operating system, anti-virus blocking etc. Please take some time to follow the 3 step procedure to see if that fixes the issue.
Here is also a separate way to download the drivers from the web instead of a disk. Just click the appropriate link - Install / Uninstall software & drivers
Let me know what goes on! Look forward to hearing back from you!
I worked for HP.

HP PSC 1510 All in One Printer

My all in one printer won't feed the photo paper into the printer even though I have changed all the settings to "best" and "glossy." I have shut the printer down, unplugged it and it still won't work. I read that you an use a "HP Paper Feed Cleaning Kit" to clean the rollers but I don't see anywhere to purchase it on this site. Does anyone have any ideas about why the printer isn't pulling the glossy paper up into the printer? Thank for you help!

I have been researching this for days! My mom recently gave me her 1510 All-In-One & I didn't have a problem until about a week after I got it. No matter if it's plain paper or photo paper, it's like it doesn't grab the paper & then that darn error light starts flashing!! I had to feed the paper manually.. and now just within the last two or three days, it won't even work when I do it that way!! I'm so frustrated! I googled it and it seems as if quite a few people have had this same problem! One thread recommended reinstalling the driver, so I did that... and nothing. I tried cleaning the rollers as well... still nothing! I'm going to keep researching. If I find a solution I'll let you know tahoedrmr, otherwise.. if anyone else who happens to come along & knows how to solve this problem, I would greatly appreciate the help!!!!

How Do I get my HP 1510 All-In-One Printer install without a CD

I forgot where my CD for installation was. I keep finding but I never saw it. Are there any options for my printer to be installed at my pc besides the CD?

Hi, Please select the Operating system of your computer to download software and driver from the following link: http://support.hp.com/us-en/product/HP-Deskjet-1510-All-in-One-Printer-series/5157551/model/5157552/drivers Regards.

PSC 1510 All in one printer - won't print even black and white when colour cartridge not recognised

My PSC 1510 All in one printer is flashing the "check printer cartrige icon" and both "Black" and "Colour" icons at the bottom left of the printer.
It won't print at all, even when I select grayscale (black and white). The help pages tell me that if I remove the colour cartridge the printer will switch to backup mode and I'll still be able to print in black and white (though not copy or scan). But this is not the case, and I can find no way of switching manually to backup mode. The help pages have no useful explanation of backup mode. I've also tried cleaning the cartridge (which I'm pretty sure isn't empty) but that makes no difference.
Can anyone help? I'd be very grateful.

gabri21 wrote: I have a very similar problem with my PSC1510 but only the colour cartridge light is blinking. I am also unable to find any useful information to set up printing in back up mode. Can anyone assist in resolving this problem for us?
With only one cartridge light blinking I would suspect the cartridge, they do rarely fail (much more often for reman cartridges, see here). Clean the cartridge contascts as shown here. If that fails and the cartridge is an original HP then check the warranty date as shown here. If the cartridge is in warranty return it to your dealer for a warranty replacement.
The printer will automatically switch to backup mode if the black (or color in some printers) cartridge is removed. I do not know if this works with the PSC 1510, some all-in-on devices insist on having both cartridges present.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Windows RT and HP PSC 1510 All-in-One printer connection

Hi, I have a Windows 8.1 RT tablet (Microsoft Surface 2) and a wired HP PSC 1510 All-in-One printer. Now when I plug in the printer via the USB, there is no driver that can be found to make this printer work with my device. Anyone have this problem or any solutions? I've tried looking at HP support and nothing there has been helpful.
Let me add that on the Microsoft Surface, you cannot run .EXE files which are the file types of the HP drivers.
Thanks ahead
This question was solved.
View Solution.

Hi,
I afraid the printer is not supported on Windows RT, as you may find listed within the following support document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03168175&tmp_task=prodinfoCategory&cc=us&dlc=en...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My HP Deskjet 1510 All-in-One Prints Test Page But not emails or Web Pages, ect

My Deskjet 1510 All-in-One Printer is Hooked up. All tests show a Green Arrow, It is Turned on, and Online. It will Print a TEST PAGE, but nothing else. I have Run the HP DR Support program several times to no avail. No Error Codes or Signs appear. It simply will NOT WORK other than printing a TESTPAGE or Scanning Copies on the Printer/Copy Machine. Please Help. I have been trying to get it to work for a week. It IS a New Printer. I have tried it on 2 seperate Computers which work well with other Brands of Printers. One Runs Windows 7 Home Premium 64 Bit, Acer Aspire Desktop. The Other a Dell T5400 running Windows 7 Professional 64 Bit . Printer is set as DEFAULT. ALL SOFTWARE is UPDATED AND INSTALLED. It says it is installed properly, and that it is Hooked up Properly, Yet it will NOT work properly. Thank you.

Welcome to the HP Community , I read through your post about the printing issues you have been having, and I hope to help you! Seeing how the printer will make copies and test print tells us that the printer itself is fine and there is no hardware issues. However, seeing how printing from two different computers will not work, flags a software problem on the computers. Please try out the steps below and get back to me with the results and we will go from there. If you did not install the Full Driver, run the HP Printer Install Wizard for Windows to search and install the complete driver and software. This will need to run on both computers individually. Manually restart the print spoolers on the computers:1. Click Start
2. Type "Services" in the search field.
3. Open SERVICES
4. At the bottom, click "Extended View"
5. Search for Print Spooler
6. Right-click it and choose Properties
7. Select as Automatic in the drop down box, close the Window
8. Right click on Print Spooler and choose "Stop", wait until it stops and then right click again and "Start".
9. Close out of Services and try printing from Notepad.10. Try printing from a web browser now, if there is a problem with the print, try a different web browser. Show thanks for my reply to help you today by hitting the "thumbs up" icon below!I hope to hear from you, good luck!

Usb for 1510 all-in-one printer causing problems with it accepting print jobs

Similar Messages

Maybe you are looking for