USB Framegrabb​ers that are known to work with NI-IMAQ-dx

Does anybody know of any (preferably compact) USB framegrabbers, whether in a finished package, or in chip / development board form, that are known to be compatible with the IMAQ-dx capture?  I am currently using a Zarbeco Videolink USB Framegrabber, but I get an unknown error message when attempting to interface with it through NI-IMAQ-DX in both Labview 8.5 (kept around for some legacy programs), and Labview 2012.  Other USB webcams work just fine with the VI, so I know it's not an error in my code - just a problem with this particular framegrabber talking to Labview.  I also know that the framegrabber works fine, because it can be viewed in other video capture programs such as AmCap.  I'd prefer to figure out if a replacement USB framegrabber would be suitable BEFORE I make a purchase, so if anyone knows of any USB composite video framegrabbers that work well with NI-IMAQ-dx, I would appreciate the info.

Hi James,
In order for any USB camera or USB video adaptor to work with the IMAQdx driver it must be DirectShow compatible. If your Video Adaptor advertises DirectShow compatible then it should work with our IMAQdx driver. Please follow the guide lines from the link below to find a proper device.
What Cameras are Supported by the NI-IMAQ for USB Cameras Driver?
http://digital.ni.com/public.nsf/allkb/89E33B77CFE​244E986256F8E004E0F13
If you device is DirectShow compatible and you are having issue please look through the link below.
Troubleshooting USB (DirectShow) Camera Installation Problems
http://digital.ni.com/public.nsf/allkb/C1BC2D93ADC​392BB8625768C0060AFE7?OpenDocument
Tim O
Applications Engineer
National Instruments

Similar Messages

  • Any modem/routers that are known to work well with macbook?

    Apart from airport.....
    I have a Dlink now, wich works fine when the macbook runs on windows, but drops the signal every 5min when it runs on Tiger. Also when I try to copy large files from a shared network drive, finder frozes!!!!

    Before ditching you Dlink you may want to see if the suggestions here…
    http://discussions.apple.com/thread.jspa?threadID=518368
    … work. Not to mention I've heard that changing the preamble on the Dlink from a short to a long preamble fixes things as well.
    Apart from that, I've always had good success with 3com wireless modem/routers. You can also turn the wireless off on the DLink and then conenct say an Airport Express/Extreme to it for wireless as well.

  • Where are LETOOLS for USB? The "ADB" Driver does not work with Windows XP

    I just give up with Lenovo's arcane maze of endlessly-looping driver searches.  I managed somehow to get something called an "ADB Driver" which was supposed to allow Windows XP to recognize my tablet as a K1 Ideapad.  I downloaded the 8+mb file which installed fk knows where and plugged in my K1 tablet.  Windows recognized that it had a USB device, and when prompted to hunt for the driver (which of course I couldn't find, since Lenovo sent it into the ether) I had to back out and then hunt through my entire Windows directory for an inf file containing the word "Android". 
    For the unsuspecting, it hides in something called -- get ready for it -- OEM16. 
    I guess the L, N and V keys were missing on the keyboard of the moron who labeled this pos driver.  Oh good programming Lenovo NOT but since a chimpanzee programmed Lenovo's driver site I suppose it's of a piece that a baboon packaged this worthless driver.  This isn't an eCommerce site it's a zoo.
    I guess it was too difficult for Lenovo to include a CD with their Windows USB driver family on it.  I mean . . . that would have cost them $.0000002.  Jesus wept.
    All I want to do is have XP know that the "USB Human Interaction" device I have plugged in is my K1 Lenovo tablet.  Don't send me to Google for a USB/Windows Android driver, they direct everyone to the site of the manufacturer of the tablet.  And don't insult my intelligence by even countenancing the possibility that Google's arch rival would stoop to offer any means for their OS to talk to (cough hack) Android.
    I get that it has to be a Lenovo driver and/or program.  So where the f is it? because this is massively pissing me off.  And one other thing:  No link to Lenovo.  I don't appreciate being manipulated by Lenovo's flash crap only to land on a driver download site that says "We can't find it."
    No.  Direct me please to any non-lenovo download portal that has the most recent version of LETOOLS and hope I don't have to come back here with yet more frustration.  This is the most needlessly idiotic driver service I have ever had the misfortune of being tethered to and I hope never to have to engage with it ever again.  May I please know where LETOOLS can be downloaded?  Thank you.
    Product = K1 IDEAPAD / Born = September 16, 2011 / Sex = Android 3.1 / Skill with Android = None / Skill with Wi-Fi = None

    Hi know-vo,
    I'm sorry that you couldn't find LETools. I've cheked with internal team and was told that actually we do have the software, but it's called "Synchronization Software". Did you try that?
    If you browse to ADB Driver page by clicking "Learn More" in support site, there is a note indicating that this ADB driver works with Synchronization Software.
    Sorry for all the inconvenience caused and. I hope this info above helps.
    Cheers,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions? Thanks!

    I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions?

    Gray screen could be any number of things, bad third party at boot kext file, a bad Apple one, a bad install/upgrade of OS X, drive corruption etc.
    Run through this list of fixes
    Step by Step to fix your Mac

  • Inexpensive video caputure cards known to work with G5

    I am looking for an inexpensive video capture card to put in my G5 that I can use to capture streams from old vhs and dvds. I don't need anything fancy. I can edit them with other programs.
    If you have used a card and/or it is known to work with mac osx / g5, can you please post the name, model number, and your comments on performance.

    Hi jon_jon;
    Well your price limit has eliminated everything I have been able to find up till now so I guess I stop searching.
    Allan
    If you are interested in donating your spare CPU cycles to science, please try
    http://teammacosx.homeunix.com/index.html

  • What is the latest version of firefox that foxy tunes will work with

    what is the latest version of firefox that foxy tunes will work with

    It is compatible with Firefox 9
    * getfirefox.com
    foxytunes are here
    * https://addons.mozilla.org/en-US/firefox/addon/foxytunes/

  • [svn] 4610: Commit Josh's patch for 3. x to fix bug SDK-17367 which works around an issue with Dictionary that stops ObjectUtil .toString() working with QNames.

    Revision: 4610
    Author: [email protected]
    Date: 2009-01-21 12:48:01 -0800 (Wed, 21 Jan 2009)
    Log Message:
    Commit Josh's patch for 3.x to fix bug SDK-17367 which works around an issue with Dictionary that stops ObjectUtil.toString() working with QNames.
    QE: Yes, please add a test case to ObjectUtil tests for this scenario.
    Doc: No
    Checkintests: Pass
    Bugs:
    SDK-17367 ObjectUtil.toString(QName) causes RTE
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-17367
    http://bugs.adobe.com/jira/browse/SDK-17367
    Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/utils/ObjectUtil.as

    VPN-User,
    Ok - I see the list of issues and will ensure our X300 specialist takes a look at it.   
    Please do understand that while you have put together a very coherent list, I try to ensure priority to threads in which multiple customers are focused on a single issue, as we deliver the most benefit to the community in working on those.   This forum is primarly a peer to peer discussion forum rather than a Lenovo chat / tech support where we try to solve each and every issue put forth.
    Individuals with a long list of issues on a particular machine may find benefit from either contacting technical support and working through their list, or publishing it as you have done and wait for other users of the same system to share their experiences.
    Thanks for your patience
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I downloaded Firefox 4 and tried to launch it. The message said that Firefox will not work with this version of Mac OX. Please advise.

    I downloaded Firefox 4 and installed it. When I tried to launch it, a message came up saying that Firefox will not work with this version of Mac OSX. Now I have no Firefox. How can I get Firefox 3.6 back on my Mac? How can I make Firefox 4.0 work? Please advise.

    Thanks for the reply so quickly! Is the tenfourfox going to be be just as safe and as high of quality as the Firefox 4? Also since Mozilla's website says, "Firefox 3.6.x will be maintained with security and stability updates for a short amount of time. All users are strongly encouraged to upgrade to Firefox 4" does that mean if I go back to 3.6 there will be security and stability issues after a "short amount of time"?

  • Firefox just sent a notice that it no longer works with Mac OS X 10.5. Is that why my gmail calendar keeps non- or dysfuntioning?

    I have been experiencing constant dysfunction in my Gmail calendar on my Mac Mini, but not on any other computer. It happens whether I am using Safari or Firefox.   This morning Firefox sent a notice that is no longer works with Mac OS X 10.  Suggestions?

    Your best bet is to get a computer capable of running the latest version of Mac OS X - Mac OS X Mountain Lion (10.8). This is the most secure option and will allow you to run the latest and greatest Firefox.
    That is a pretty crazy suggestion just to update a browser! There is another alternative if you are worried about having an unsupported browser.
    You can run TenFourFox whose purpose is to support older Macs.
    available here;
    http://www.macupdate.com/app/mac/37761/tenfourfox
    more info about it here;
    http://en.wikipedia.org/wiki/TenFourFox

  • I hope that Photoshop E 6 works with Premiere E 7

    I hope that Photoshop E 6 works with Premiere E 7.
    Is there a betatester who knows, Steve?

    Yes -- but not in the same way that Photo Elements 7 will work with Premiere Elements 7.
    In other words, yes, they'll work on the same machine and, yes, when you select the option to edit a photo in Premiere Elements, Photo Elements will launch.
    But, there are some features -- like sending a slideshow from Photo Elements to Premiere Elements -- that only work if both programs are of the same generation.

  • I am considering purchasing a new Mac desktop. I have, at present, a Liteon 851S ext CD/DVD write and a Maxtor 3200 USB ext hard drive. Will these work with a Mac desktop? My local Apple store could not answer my question.Happy New year to all.

    I am considering purchasing a new Mac desktop. I have, at present, a Liteon 851S ext CD/DVD write and a Maxtor 3200 USB ext hard drive. Will these work with a Mac desktop? My local Apple store could not answer my question.Happy New year to all.

    Yes the Mac can read that drive but you would need to Copy the data off of it to the Mac as apposed to Move, which implies Deleting them from the drive as they were transferred from the external to the Mac. Since the Mac can Not Write to NTFS drives it can't Delete anything as that is really a Write operation, IE Making changes to the NTFS formatted drive.
    Once you have that Data on Both your New Mac and you Older Windows PC you can format that drive to work on both system.
    If you want to and plan on doing that post back and I'll explane how, it is simple but should be done on a Windows PC.
    If you only plan on using it on the Mac from now on that is fairly simple also and is done on the Mac, Once you have the files from it stored on the Mac.
    Yes you could burn those photos to DVD but that is just a waste of DVDs, you don't need to.

  • Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

  • Dear sir I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract. Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card. And invalid sim appeared.so I bought it without contract but it

    Dear sir
    I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
    Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
    And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
    Please tell me whats the matter?
    My phone serial no  86034HTCA4T
    Modem firmware  04.12.09
    Thanks

    Without contract is not the same as unlocked. The update to iOS 7 relocked
    the iPhone to the wireless carrier to which it was originally locked. You must
    contact that wireless carrier to see if they offer unlocking and if you qualify.
    If you used jailbreak or other hack to unlock the iPhone initially, the method
    used may prevent a legitimate unlock from succeeding and may render your
    iPhone unuseable.

  • I am running an Apple imac G-5 with OS 10.5.8. I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest

    I am running an Apple imac G-5 with OS 10.5.8. Processor: 2 GHz. Memory: 2 GB DDR SDRAM.  I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest

    Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more active and appropriate forum for your product.

  • When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CC

    When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CCError message with InDesign CC 2014

    Used the 64bit version before CC 2014 as well so don't think that's the issue. Here is the text in the .mxi file if I have missed something:
    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <macromedia-extension id="PrintUI Tools" name="PrintUI Tools" requires-restart="true" version="3.0.0">
      <author name="PrintUI.com"/>
      <description/>
      <license-agreement/>
      <products>
        <product maxversion="" name="InDesign" primary="true" version="7.0"/>
      </products>
      <files>
        <file destination="" file-type="CSXS" products="" source="PrintUIManagement.zxp"/>
      </files>
      <update url="http://printui.com/public/downloads/updates/printui_tools_update.xml"/>
    </macromedia-extension>

Maybe you are looking for