USB generation 3.0 compatiability with OS 10.4.11?
Kingston has all these generation 3.0 USB drives.
According to their description, they can be used only with OS X v.10.5.x+.
Do you guys think I would face some error messages if I try to use those gen 3.0 USB with my OS X v.10.4.11 (Tiger)??
I personally want to get the gen 3.0 USB since they can be used with Window 7 as well.
Any advices?
Thanks in advance.
I had the same question on the new USB 3.0 My Book drive. The box says backwards compatible for USB 2.0, but the software requirements say no less than Leopard 10.5. I emailed WD and they could not confirm the drive would be compatible with Tiger. I'd like to buy a 3.0 since we might upgrade next year, or whenever the next gen iMacs have 3.0.
Similar Messages
-
Why doesn't my fifth generation ipod nano work with my Toyota Yaris?
Hello – The charging feature on my new fifth generation ipod nano doesn’t work with the factory glove compartment adapter that came with my 2008 Toyota Yaris. It plays music, etc but does not charge the ipod when connected.
My third generation nano charged perfectly with my yaris until it was run over and crushed recently. My nano gen 5 replacement doesn’t work the same with my Yaris. Can anyone help?
Steve
[email protected]I cannot say for sure, I don't know anything about the toyota yaris. However, if that system was built to work with older firewire based iPods, then it will not charge new USB based units. There are converters out there you can get do deal with this.
http://www.scosche.com/products/productID/1667
i -
Does the dock from a fourth generation ipod shuffle work with a second generation ipod shuffle?
No, they are different. If you look at the replacement part for the 4th gen shuffle's USB cable
http://store.apple.com/us/product/MC003ZM/A
it says it's only for the 3rd and 4th gen shuffle. -
What web cams are compatiable with an imac on the latest software version?
Hi There
Does anyone know of a cheaper web cam than the isight? There are many different makes but i cannot find any that are compatiable with latest version of operating system.
Thanks for your help
SimonHi Simon,
There is this Apple Doc http://www.apple.com/downloads/macosx/drivers/firewirewebcamdriver.html
It lists this page http://www.ioxperts.com/devices/webcam.html
If you are going for a USB cam you will need http://www.ecamm.com/mac/ichatusbcam/
It has a Camera list page http://www.ecamm.com/mac/ichatusbcam/configs.html that links to drivers if the one that comes with the camera does not work.
Logitechs seem popular.
10:01 PM Sunday; May 14, 2006 -
External USB HD does not work with HAL:
External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era -
I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...
Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments -
Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version
Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.
-
My iPod Touch 4th Generation isn't syncing with iTunes?
My iPod Touch 4th Generation refuses to sync with iTunes. Everytime I try to sync it says "Sync session failed to start". How do I fix this?
See these previous discussion:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities -
My i pod nano first generation doesn't work with windows 8
My i pod nano first generation doesn't work with windows 8
Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H. -
ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.
yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed. click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
click on music check mark music done and sync
problem solved
thanks apple -
My Ipod nano 3rd generation will not sync with itunes or show up on windows, but other ipods do when I connect them using the same setup.
Hey Biglou1,
Thanks for the question, and welcome to Apple Support Communities.
I understand that your iPod nano(3rd generation) is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
Apple - Support - iPod - iPod nano (3rd generation) Troubleshooting
http://www.apple.com/support/ipod/five_rs/nano3gen/
If the above did not resolve your issue, choose an applicable article below that best describes your issue.
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M. -
5th generation iPod nano compatibility with Linux?
I have Linux on my computer is the 5th generation iPod nano compatible with my operating system? Would i need to install a particular program to make it work.
trailman00 wrote:
Why not let the customer choose to use iTunes or not ?
Be able to add individual files just by copying them from any computer (any OS, with or without iTunes installed), and use a filesystem browser on the iPod to select which file to play in which directory.
Only Apple would know the answer to this. However, based on the history of the iPod, it seems unlikely that you're going to see this happen. One of the major differentiating features of the iPod is that one doesn't have to mess with a file system browser, it's all handled automatically by iTunes. Now, that's not to say that everyone is going to like players that work this way. Hence, the continuing market for other brands of players.
Please, release a new iPod firmware supporting this feature.
Again, seems very unlikely as it runs counter to the entire Apple design philosophy. However, if you want to make your feelings known to Apple (as opposed to just the fellow users who are going to be seeing this post), submit your feedback here:
http://www.apple.com/feedback/ipodnano.html
Best of luck. -
Is iTunes compatiable with Windows Vista??
hey ppl!
is iTunes compatiable with Windows Vista??? i wanna know this if i am getting Windows Vista and if it can work on it
cheers
hoseyHi! I have just had windows vista installed onto my PC. I backed up all my songs etc from ipod yet when I have uploaded the latest version of itunes and installed the songs onto it, my ipod is not recognised. Basically when I go to put new stuff ontomy ipod a box appears saying that I can only be synced to one itunes library at one time. Then it asks if I want to sync to this library. Obviously I say no as I dont want to lose anything anyway now my old itunes library is somewhere in the ether and I cannot import any new songs! I have tried purchasing a few songs but again it will not importto my ipod!! Im so confused! Can anyone help me please??
-
Using USB to connect to itunes with iphone. Getting error OXE8000084 with pulsating tone. Have reset password, authorized computer, & repaired itunes when reinstalled it. Any suggestions on how to successfully connect to itunes and what this error message means? Thanks
0X is a Windows Error. Take the time to look over on the right under the "More Like This" and look for ones that have the green checkmark as being solved. You should find answers there.
-
My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...
Now iTunes will not recognize my phone as a device...
Maybe you are looking for
-
Image size and resolution question.
Is an image at W 48.667 x H 32.444 inches at 72 res the same as an image that I could convert in photoshop to 300 res and then the with "Resample Image" clicked off would be W 11.68 x H 7.78 at 300 res for printing purposes? I'm asking this questions
-
Using DBMS_JOB to schedule auto execution of procedure on a daily basis
I need to implement a batch procedure for my project and would be using DBMS_JOB for the same purpose.I have tried creating a job for the same that I submitted using DBMS_JOB.SUBMIT() and I ran the job initially using DBMS_JOB.run(). Now at this inst
-
Why does HP India defaults on offers they make when they sell printers?
I bought a printer on 1st July 2012. The date on the invoice was 07/01/2012 (in mm/dd/yyyy format). The service center at HP claimed that the date was "wrong" and they use that excuse to not give me the backpack that was part of the deal when I bough
-
Vista upgrade on 24" imac to play Halo 2?
Hi, Ijust tried posting in the Windows section but the site is down so i'll post here if that's ok? I have a full version of Windows XP installed on my 24" imac and it runs fine. I now hve a Windows Vista upgrade disc and was wondering if i can use t
-
na