USB Hard Drive won't show in AirPort Utility

Hello,
I recently brought OWC Mercury Elite-AL Pro mini 750GB hard drive and attached it to Time Capsule. I opened AirPort Utility / Manual Setup / Disks. It didn't dhow the attached USB hard drive. The file sharing option is already enabled and I also restarted everything I can.
The USB Hard Drive is working fine since I'm able to open it when I connect it to MacBook Pro. The USB Hard Drive is already pre-formatted in Mac OS Extended (Journaled) format.
Any idea?

Never mind. I come to know that Time Capsule won't provide sufficient power to these kind of large hard drives with multiple ports. I brought Belkin USB Desk Bub with 4 USB ports and then connected hard drive to Time Capsule. That's it. Now my drive automatically shows in Time Capsule.
Even I'm able to play my media (previously I moved my iTunes Media to this drive.) without connecting hard drive to my Mac directly.

Similar Messages

USB external hard drive won't show up in Lion

My external USB hard drive won't show up in Finder, even though it's visible in both the Disk Utility, which says the drive is fine, and in Terminal.
How can I get it mounted? I have researched the issue and found no solution.It disappeared while I was downloading IOS6.
It has all my iTunes and iPhoto files!
Many thanks

I have a very similar issue. I have a seagate external usb drive 500 GB that is partitioned. One FAT 32 the other MAC OS Extended (Journaled). It has suddenly for no apparent reason stopped being able to mount the Mac OS volume. The FAT 32 vol. works fine. Disk Utility says that it is fine when I do a repair or verity etc. When I click on mount, it won't work. It says mount failed. Try running First Aid on the disk and then retry mounting. Same thing happens once that is done. ??????Any ideas?????

After installing snow leopard my external hard drive won't show up on screen or backup

Afer installing leopard my external hard drive won't show up on my desk top. It also won't backup my hard drive with time machine. I need help.

Try going to finder preferences, general, make sure show these items on desktop external disks is clicked. You can also go to sidebar (same pane) and click it there so it will show when you open your HD. Time Machine>system preferences>time machine>turn it off click select disk, make sure the correct disk is selected, the turn TM back on. Hope this helps.

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
Does the drive now appear in finder..
If not reboot both drive and the AE.. it should now appear.
If it doesn't work with direct connection try a powered hub.. that can help.

External PC Hard Drive won't show up on my Mac

My friend copied a bunch of files on his home PC to his external USB Hard Drive.
I plugged it in to my USB hub, turned it on, but my Mac won't recognize the drive. It doesn't show anything.
How do I get it to see this drive so I can pull the files off?

Not all USB drives work well with Macs.
Have you tried direct connect?
Do you have a USB2 controller? one of the first things to add.
Is it FAT32 format? NTFS? something else? You should be able to read both of those.
Have you looked to see if it shows at all in System Profiler or Disk Utility?
How about after a restart with it plugged in and already on?

HELP! External hard drive won't show up in finder!

Last night, I was updating my macbook (from August 2008, still runs on leopard) and it needed to restart. I forgot to eject my LaCie Porsche 1tb external hard drive first and, when it rebooted, I got the error of death (aka "disk was not ejected..."). When connected to the USB port, the drive lights up, I can hear it spinning, but it won't show up in finder and I can't see it in Disk Utility to repair it (after the first error of death, the computer wouldn't even acknowledge that I had the drive plugged in). I've tried plugging it into the different USB ports and even on a different macbook, but no luck in getting the computer to recognize it long enough to use Disk Utility or DiskWarrior. Any tips on how I can get my macbook to read the drive again?

If the external hard drive is not showing up in Disk Utility when connected to two or more different computers, then the problem is with the hard drive, it is broken. Get a new one.

How to i get my usb hard drive to auto show on desk top

Hi
I have a small business and so multiple macs with 1 single external hard drive for storage
One of the Macs automatically connects to the USB hard drive when the mac starts up in a morning, whereas with the others you have to search for the shared drive and manually connect to it.
We have now changed to a new hard drive and would like all the Macs to automatically link in the morning and so wondered how this is done. Also the older mac is now still looking for the old drive and I cant stop it!
Hope this makes sense?
Hope someone can help
Cheers
Michael

You need to find the IP of that drive.
If they in fact do show up on the Desktop, then create a new Folder maybe named Shares on/in the Desktop, drag all those Shares shown on the Desktop to that Folder, drag that Folder to the right side of the Dock between Applications & Trash, this should give you a popup menu to select from.:-)
Mount that Share once, then once the Globe Icon shows up on the Desktop, drag that Globe Icon to the right side of the Dock between Applications & Trash. You now have a Dynamic Mount, a quick click on the Icon in the Dock will connect you.

External USB hard drive won't reformat, won't appear in Finder, error: Unable to write to the last block of the device message

So I just got a new MacBook Air and since I had an external USB hard drive (TOSHIBA MQ01ABD100 1TB) lying around, I decided to use it for back-up. Since I only have just the one hard drive, I decided to partition it into two - one for Time Machine backups, and one for general files (formatted FAT so I could use it with Windows). However, the partitioning failed and I ended up with a partition named disk1s2. Plus, it won't appear on Finder anymore, but it appears in Disk Utility.
I have tried to reformat it, but I always get the message "Unable to write to the last block of the device".
Here's the info about my drive:
Name: TOSHIBA MQ01ABD100 Media
Type: Disk
Partition Map Scheme: GUID Partition Table
Disk Identifier: disk1
Media Name: TOSHIBA MQ01ABD100 Media
Media Type: Generic
Connection Bus: USB
USB Serial Number: 1220069C
Device Tree: IODeviceTree:/PCI0@0/XHC@14
Writable: Yes
Ejectable: Yes
Location: External
Total Capacity: 1 TB
Disk Number: 1
Partition Number: 0
S.M.A.R.T. Status: Not Supported
And here's for disk1s2:
Name: disk1s2
Type: Partition
Disk Identifier: disk1s2
Mount Point: Not mounted
File System: Mac OS Extended
Connection Bus: USB
Device Tree: IODeviceTree:/PCI0@0/XHC@14
Writable: Yes
Capacity: 999.86 GB
Owners Enabled: No
Can Turn Owners Off: Yes
Can Be Formatted: Yes
Bootable: Yes
Supports Journaling: Yes
Journaled: No
Disk Number: 1
Partition Number: 2
Here's what it says when I run diskutil in Terminal:
Device Identifier:        disk1
Device Node:              /dev/disk1
Part of Whole:            disk1
Device / Media Name:      TOSHIBA MQ01ABD100 Media
Volume Name:              Not applicable (no file system)
Mounted:                  Not applicable (no file system)
File System:              None
Content (IOContent):      GUID_partition_scheme
OS Can Be Installed:      No
Media Type:               Generic
Protocol:                 USB
SMART Status:             Not Supported
Total Size:               1.0 TB (1000204884480 Bytes) (exactly 1953525165 512-Byte-Units)
Volume Free Space:        Not applicable (no file system)
Device Block Size:        512 Bytes
Read-Only Media:          No
Read-Only Volume:         Not applicable (no file system)
Ejectable:                Yes
Whole:                    Yes
Internal:                 No
OS 9 Drivers:             No
Low Level Format:         Not supported
I didn't have any data in it prior to the failed partitioning attempt, so there aren't any worries of data recovery. But I'd really like to be able to use this drive again, and save some money (external hard drives are expensive where I live). Anyone with any ideas?

I'd also like to add that repairing the disk using Disk Utility does nothing but tell me to reformat the drive. So I'm stuck in a loop here.

External Lacie Hard Drive Won't Show On Desktop

Hello,
I have a LaCie d2 Hard Drive Extreme with Triple Interface. I know this topic has been posted before but nothing seems to be working for me. The hard drive will not show on my desktop, but it does show up in the Disk Utility. It's there, but I can't access it.
I have disconnected the drive many times. I have repaired the permissions on both drives more than once. I have swapped cables between firewire and USB. I have tried shutting down everything, unplugging everything and waiting 15 mintues before turning everything on. (Three times) (I have tried turning the computer on before connecting the drive, no good. I tried again with the drive already plugged in, no good, and also tried turning the computer on, then plugging the drive in and turning it on.
I have another LaCie Hard Drive, The one that has the design by F.A. Porsche and is 250GB. This drive connects perfectly. I don't understand. Hope someone out there can help me out, take care,
Tom

has the Lacie HD been formatted by another computer?

Hard drive won't show up!

I was having some problems with the computer running slow so I ran disk utility and it showed there was a problem and it needed to be started from a disk so the hard drive could be repaired. I started with the TechTool Deluxe that came with Applecare and had it test the entire system and repair it. It found a problem with the hard drive and asked to fix it. I let it fix it and went to restart and all that came up was the white screen and a black box. All fans came on and that was it. I restarted with the disk again and tested everything again and no trouble was found. I restarted again and the same screen came up. I started it in "Target disk mode" with an iBook and the hard drive did not show up. I started it with the OS X disk and went through the steps to re-install the system and there was no hard drive to install it to. I ran disk Utility from the OS X disk and it says "Invalid B-Tree node size. Volume check failed. Error: The underlying reported failure on exit. 1 Volume could not be repaired because of an error." in RED. Please Help. Thanks.
20' G5 no iSight Mac OS X (10.4.4)

Yes, I am trying not to lose all of my stuff, but when I go to install OS X from the disk, the hard drive is not there to install it to. The only time the drive shows up is when I use disk utility from the installer disk and it can't repair the drive. The only option that I can see is format. I am going to try Target disk mode again later today and see if I can retreive everything from the drive, that is if it shows up. I didn't show up the last time I tried that.

Internal hard drives won't appear in Disk Util

I have a bizarre problem with my hard drives now. I'm on a 2.4GHz Core2Duo Macbook Pro 15" with 10.5.4. I've switched the hard drive a couple of times before with no issues whatsoever. Now, with the exception of the brand new one that won't hold an install, my internal hard drives don't show up in the install disk's Disk Utility.
I got a new hard drive to try the other day, installed it, booted to my OSX install disk to use Disk Utility. I switched the new disk to GUID and formatted it as journaled like usual. It took 4 hours to do the install, then after the restart it tanked. It booted back to the install disk where I checked it out. It could not repair the file system, and the drive was not "mounted". I mounted it, repartitioned and formatted it, and installed again. This time it stopped halfway through the installation and said the drive might be corrupt.
I unplugged the cable and battery, held the power button for over 5 secs, then just let it sit for about 10minutes with no power source while I thought about this. I put the original drive back in, booted into OSX, and put the new hard drive in an external USB enclosure. I formatted it while in OSX, then rebooted into the install disk and installed OSX on it while it was in the USB case. It took the installation more quickly (about an hour and a half...still not 20min like my old 7200rpm Hitachi 200g), then I booted into its OSX while in the USB drive. It booted ok, so I downloaded the updates and clicked to install them. It then went into a revolving restart. Eventually I decided it was not doing this because it was happy so I shut it off.
I swapped the hard drive out with another new one, and this one would not complete an installation while inside the computer either. It acted similarly while in the USB case. HOWEVER it would always show up as unmounted after a restart and would not recognize the drive inside the computer as a bootable disk.
I put my original drive in there to give up, and it gave me the ? folder. I booted to the install disk and it did not show up in the disk utility. I put my old hard drive in the USB case, booted to the install disk, and it showed that it was there, but unmounted and it could not repair the file system.
I repartitioned my hard drive (i have time machine working..not a huge setback) in the USB case and put it back in the computer. It still would not show up in disk utility. I put it back in the USB case, installed OSX onto it (in about 20min), restarted a couple times, saw that it was working, put it into my computer, and got the ? folder again.
I went out and bought a stardard 160GB SATA 5400rpm Seagate drive to try in there, and this fresh drive is not recognized inside the computer either when I boot into disk utility.
The brand new hard drive WILL show up in Disk Utility when I boot to it from the install disk, but it will not survive a complete installation.
So now I'm running OSX from my original hard drive in a USB case until I can figure out why the old disk recognized inside my laptop is the new hard drive upgrade, but it cannot complete an installation on it.
I'm originally a Windows slave, so I can only think in terms of AHCI or SATA-card drivers, or screwed up bios. But this is all pre-os-boot, and the apple firmware seems to be pretty automatic in picking the right settings to see stuff.

I kind of feel like drawing a flowchart to show all that I've tried. Its difficult to keep everything intelligible while listing the entire last week's efforts at 2:45am. :-/
http://www.ocztechnologyforum.com/forum/showthread.php?t=41951
I also explained it here, perhaps a bit differently. Maybe some reply there might spark someone's memory of a possible problem. I understand the nature of computers (been 100% geek for 20 years), but I'm hoping there's someone out there with the specific Apple expertise to help me out. Eventually the processes I've taken and my specific situation will become clearer as the questions widdle away at this.
My original 7200rpm SATA drive that works fine won't show up when connected to the SATA cable. I've repartitioned it with HFS, and repartitioned it as free space in the USB enclosure. It simply won't show up in Disk Util. Same with the brand new test SATA drive.
The new SSD SATAII does show up, but after a 4hr install the partition is unmounted and won't show up as a boot option. I can boot to the install disk and repartition it, reinstall, or remount it. But it will never be mounted to be booted from while connected to the computer. I've had 2 of the SSD's to try, one survived one restart, then went into a never-ending restart cycle after I installed the updates. The 2nd has never successfully been mounted after the install to boot from. Now nothing can be mounted to boot from within the computer. I have to boot off of any of these drives from the USB enclosure.
If I install OSX on them while in the USB enclosure, that works, but they will not mount when connected to the SATA cable inside the lappy. The platter style SATA drives won't even be recognized...
Thanks for the instant reply, this is driving me nuts 'cuz it makes almost no sense. Thanks so much to everyone that contributes. I appreciate everything.

External hard drive won't unmount for disk utility.

Im not sure if this is the right topic area but I have a white macbook and my external hard drive won't unmount. I want to erase it via disk utility but it keeps telling me other programs are using it.

Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.

New external hard drive won't show up in disk utilities...

I have a 2010 macbook pro 13" and just bought a 1tb toshiba canvio external hard drive.
The hard drive itself has a USB 3.0 hub running out of it and the specifications say that it needs to run into at least a 2.0 hub, which I have.
I know I will need to reformat the external drive to get it to work on a mac, but it won't show up at all when I plug it in... the drive starts spinning but there is no recognition by my mac.
Does anyone know what this is and how to fix it?

So far all MacBook users have been able to use this drive as a USB 2.0 by using a USB 2.0 cable with a micro usb connector (same as smartphones, Kindle, Nook) on one end. Connect the micro connector to the opening on the left side of the USB 3.0 connector on the Canvio - if you look closely you'll see that side is exactly like the USB 2.0 micro receptacle. That's all you need to connect as a USB 2.0 - the other connections are for USB 3.0 which no Apple system has yet (Dec 2011). Connect the other end (a standard USB type A plug) to your MacBook and it will work. If you want to use it for Time Machine, you'll have to reformat it. None of the supplied software will work with Mac You can read more at this thread:
https://discussions.apple.com/thread/3510032?start=0&tstart=0

My external hard drive won't show up on my MacBook Pro

So, I'm trying to transfer my music from my PC to my MacBook Pro. I put all my music on an external hard drive, but for some reason when I plug it into my MacBook it won't show up on the desk top. I've already changed my preferences in Finder so that hard drives and disks will show on the desktop, but still nothing. I looked in utilities to see if the hard drive was there, and still nothing. The hard drive is a Toshiba and is fairly new, the light goes on when I plug it into my laptop, so I'm very confused. Can anyone help me with my predicament?

Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Boot into Recovery and launch Disk Utility. Is the drive recognized?
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

Hard Drive won't show up on MBP 2011 running Mavericks

My WD My Passport Edge 500GB hard drive has been working for the past 2 or so years i've had it, on all my devices including the telstra t-box, and when I go and upgrade my Snow Leopard (1.6.8) MacBook Pro 2011 to 10.9.3 Mavericks, the Hard Drive stops working, for some reason i can still use other hard drives/usbs (Tested external mouse, 1TB hard drive different brand and also 8GB USB i have). Looking at other forums i've tried looking at Disk Utility, It does not show there. However it DOES show in the System Information -> USB section. It doesn't show in finder or terminal (Using cd /volumes -> ls)
The Hard drive lights up as normal and i can still hear the faint whirring it always makes when i use it.
Thanks in advance to anyone who can assist me, i really need the data on this hard drive!

Smiggle04 wrote:
What do you mean install it in another enclosure?
All HDDs come in and are used in an enclosure or a 'case'. This a typical one:
if theres a way i can plug my hard drive into a windows computer and reformat it on there to the FAT32 thing an backup all the stuff to my second hard drive..is this an option??
If you wish to reformat a HDD, back it up (or clone it) first. FORMATTING A HDD WILL DELETE ALL DATA ON THE DRIVE!
Note that Fat32 has a 4GB file size limit. ExFAT may be a better option.
Ciao.

USB Hard Drive won't show in AirPort Utility

Similar Messages

Maybe you are looking for