USB has a probl

My computer has not been detecting my zen touch since I got it. I have just discovered that the problem lies not with the player (as I first suspected) but with the USB controller.
It tells me in the device manager that the "device cannot start (code 0)" and I can't think of anything I can do to fix it. My OS is windows xp service pack 2 so apparently I do not need to update my drivers (unless the fact that I updated from windows 98 to XP and my computer is quite old may have something to do with it).
Any help given will be much appreciated. Thanks.

Code 0 normally indicates a problem with the player or the USB hardware. You should make sure to reset the player and run a disk cleanup from rescue mode.
You should also of course make sure you have the latest drivers (and software) from Nomadworld.com downloads.

Similar Messages

When I plug my iphone in to my USB port in the car or computer I get an error message which says the USB has exceeded it power limit

When I plug my iphone in to my USB port in the car or computer I get an error message which says the USB has exceeded it power limit.
What can I do?

madonnafromqld wrote:
When I plug my iphone in to my USB port in the car or computer I get an error message which says the USB has exceeded it power limit.
What can I do?
Stop doing that.

My USB Has Not Arrived But Is Listed As Delivered

Hello. I'm hoping someone here will reply and assist me, as I have been leaving messages and calling for weeks now regarding an order I paid for but did not receive, and urgently needed when I ordered it on August 13. The order was a usb recovery device for my mini-notebook, which is not functioning at all, even after troubleshooting over the phone. The order summary Toshiba emailed me on August 14 reads as follows:
Order Number: SFF415546
Item Shipped: SW Media - USB-MINI NOTEBOOK-NB505-Windows 7 32bit Starter-EN for mini notebook NB505-N508BL
DHL Tracking Number: SFF415546
When I go to the tracking page, the device is listed as delivered in my city of Woodside, but I have not received it. I have also called DHL numerous times, but I am treated in much the same manner as with your firm, unfortunately; sent round and round to different departments where no one will tell me anything of tangible value. The above tracking page also lists a USPS delivery confirmation:
USPS Delivery Confirmation
9102901000433256226557
I did go to the Woodside post office this past Friday and the manager is checking to see who the USPS carrier was and where it might have been delivered (meaning someone else may have taken my order!). The building super and my neighbors do not have it, either. At this point, after so much runaround, I really need a. some human assistance and b. a replacement usb sent out or a refund from Toshiba. This has been an awful experience thus far.

When you contacted Toshiba, did you get any case number or anything?
- Peter

USB has no power when computer sleeps

When my computer goes into sleep mode, time machine cannot connect to my external HD because apparently the usb port goes to sleep along with the computer. Same thing happens when i plug my iphone to charge. I plug in my iphone, shows that it's charging, I put the computer to sleep, it stops charging instantly. I have two imac computers, same thing happens on both machines. Is there anyway to keep the power to the usb ports while the computer sleeps?

Hi there, Welcome to the Apple Support Forums. What I say is just my own opinion. We all work in many different ways.
I can't see any benefit to keeping a USB port fired up to keep a hard drive running, when the computer and Time Machine are both asleep. If nothing is happening or changing on your computer then there's not much point of keeping a Time Machine drive running. In addition, I wouldn't consider using a USB powered drive for something important like a backup system. USB powered devices can be pretty flakey.
Meanwhile, as far as a charger for an iPhone, this year at MacWorld SF, I bought a Griffin Simplifi dock. It also doubles as a memory card reader, and has two USB ports for thumb drives or whatever. It's got it's own AC power adapter so I don't worry about the computer going to sleep or even shutting it down.
Amazon has the Simplify device for $42 w/free shipping. I leave my iPhone in the dock whenever I'm around the office. I think I paid around $70 at the show and don't regret it a bit.
Apple also provided you with a small square AC power adapter for a USB cable to connect to charge your iPhone (at least they did with mine). But I really like having the dock sitting just in front of my Mac.
Message was edited by: dechamp

USB has suddenly slowed down to a snails pace

I'm not sure how this happened, but transferring anything, from either USB port, and via any device, has gone from fast (USB 2.0), to super slow. Recently, it has taken awhile for my My Book drive to show up, but the transfer speed has always been fine. Now, it just *****.
Anyone have this happen to them, or know of a solution?
TIA

results from user error or mistake powering down without unmounting first.
disconnect the drive. zap pram on the computer. hope this works and reconnect all and try again.
you could also try a power manager reset.

Elgato video to USB has become unreliable after shutdowns and restarts

I have Yosemite 10.10 on an early 2009 iMac, and an Elgato Video capture device with latest software (1.1.5)
The messages "Device could not be initialized" and also "Please connect your Elgato Video capture hardware to any USB 2.0 port" come up after I have had a shutdown and restart.
For 2 or 3 years i have operated this system with no trouble, but as the iMac software became upgraded, and also the Elgato S/W upgraded, the problem has come up, so now I am reluctant to shut down. However, there are times it must be, such as when the power company shuts service down for maintenance - happens a lot lately. I have tried different ports, and done the unplug and replug routine, but it takes dozens or even hundreds of attempts until one time it works. then i have to be sure not to "quit" after a recording session, or the problem comes up all over again. Also I tried using a USB hub, with no success. Also, I have tried to reset of the USB bus routine (Command-Option-P and R keys during startup) with no success.

Get rid of CleanMyMac and DivX. Add much more RAM. You don't have nearly enough for all that you are trying to load.

6720s usb has died

hi
help needed.
i had a problem with my iphone and have been given a new one, but the usb ports on my compaq 6720s seem to have stopped working. i have tried a usd memory stick as well as the iphone but nothing happens..... i need help please.
thanks

A bad device can blow the USB chip on the mother board. Go into the CMOS and make sure USB is turned on if your bios has that feature. Many bios don't have a lot of choices for the end user. If you do find the section that lets you set the speed and weather legacy should be turned on just make sure everything is enabled and hi speed 480Mb/sec is selected, if not it probably won't help anyway. It sounds like the chip is blown. I very good repair shop can remove the usb chip and replace it with a new one but those shops are not too common.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Anyone Else has this probl

[size="3" face="Comic Sans MS" color="#993399">Hello. Here's what happened[size="3" face="Comic Sans MS" color="#993399">?[size="3" face="Comic Sans MS" color="#993399">>uninstalled anything about creative[size="3" face="Comic Sans MS" color="#993399">?[size="3" face="Comic Sans MS" color="#993399">>reinstalled it[size="3" face="Comic Sans MS" color="#993399">?[size="3" face="Comic Sans MS" color="#993399">>(I wanted to get back to the DRM License Request Page, but it said "error" the next time around)[size="3" face="Comic Sans MS" color="#993399">?[size="3" face="Comic Sans MS" color="#993399">>uninstalled after I found "traces" of Creative in my Registry editor? :robotmad:[size="3" face="Comic Sans MS" color="#993399">?[size="3" face="Comic Sans MS" color="#993399">>deleted "traces" out of Registry Editor [size="3" face="Comic Sans MS" color="#993399">?[size="3" face="Comic Sans MS" color="#993399">>re-reinstalled[size="3" face="Comic Sans MS" color="#993399">?[size="3" face="Comic Sans MS" color="#993399">so now when I plug the USB in, my computer recognizes the device and goes to [size="3" face="Comic Sans MS" color="#993399">?[size="3" face="Comic Sans MS" color="#993399">MediaSource like it should, but it's not playing that nice chime when the [size="3" face="Comic Sans MS" color="#993399">?[size="3" face="Comic Sans MS" color="#993399">player is connected...
[size="3" face="Comic Sans MS" color="#993399">?[size="3" face="Comic Sans MS" color="#993399">Has anyone else experienced this?[color="#993399">?[size="3" face="Comic Sans MS" color="#993399">Thanks? :womanvery-happy:

This is going to sound REALLY retarded, but the reason why I wasn't hearing the happy chime of?connectivity was because the laptop volume wasn't high enough!? Silly Silly me. I normally have my?laptop?plugged into external?speakers than the regular sucky inside speakers. Thanks for your?patience!
!!! I LOVE CREATIVE!!!
!!! I didn't do the driver thing. But I will DEFINITELY keep that in mind for another time

USB has power, but not detecting any USB drive. Also crazy trackpad.

I own a 2012 Macbook Pro, and I am running OS X Version 10.9.4 on it. Everything was working fine until last week, when the USB ports stopped working. Now, the USB ports still have power because the lights in my USB drive and external hard disk turn on when I insert them into the system. However, the OS X is not able to detect any of these devices as well as my USB mouse. I have Windows 7 installed on bootcamp, but there is no USB response in Windows 7 as well.
I have done the SMC and PRAM reset, as suggested on numerous other discussions, but there were no improvements.
To add to all this, the trackpad on my macbook started going berserk. The pointer has started to randomly click and drag, while I am not even touching the trackpad. It is extremely hard to move cursor to a particular folder, because the cursor will click and drag a lot of times, while it has reached its destination. Also, the trackpad acts insensitive in certain regions. I tried cleaning the trackpad (as suggested on other discussions), but the problem goes away only temporarily. It seems, after using it for a couple of hours, the problem is back again.
With USB and trackpad not responding, it is getting hard to pass the first week of school. I took it to IT department at my school, they checked it for a couple of minutes, and told me that I'll have to shell out $280 for sending it to Apple Depot. I'll really appreciate any kinda help!
Thanks for your time!

Hi @Ak7
Welcome to the HP Support Forums!
I understand that you are having trouble with your USB ports not recognizing most devices. I am happy to assist with this.
Since it just recently started to happen, I would normally recommend starting with a system restore to a point before the problem began. (say about a week ago or longer if possible) Unfortunately you have already done a reinstall, so there should not be any useful restore points to use.
Presumably you already backed up any data you could before reinstalling windows, and if so, then you could try a system recovery, which would restore the factory image of the notebook. Give it a try and let me know if it makes any difference.
Using Microsoft System Restore (Windows 7)
Performing an HP System Recovery (Windows 7)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

My usb has been disable i need help

mac book usb had been disable i need to bring the power back

Try things in this USB faq.
DALE

USB 2.0 probl

Hi i've got a Muvo 4gb and i've just got a new computer with xp home edition SP2 and its got usb2 ports. When i connect my mp3 player to it its recognized as a muvo but as i try to install it nothing happens, windows says drivers missing or something like that.
When i stuck it into my other computer (xp pro sp2) with an usb port it works. But i want to use my usb2 connection so please help me i've treid updating my windows but nothing helps!

Sounds like a USB compatibility issue with your PC, if the other PC is working fine. I would buy a good quality PCI USB2 card e.g. Adaptec, and see if this works.

HT4061 if the usb has a arrow to itunes how you get rid of it

if the usb wire is pointing a arrow to itunes how you get rid of it?

You plug into a computer with iTunes on it, like the diagram tells you to.

How many network interfaces the Airport Extreme (a/b/g/n with USB) has?

I am trying to use an SNMP client on the computer to monitor my network traffic.
I using the Airport Extreme (AEBS) to connect to the internet using PPPoE. wifi and ethernet (RJ45) ports are used for LAN
Now after setting up the SNMP client, it shows so many interfaces the AEBS has, and most names of the interfaces cant give me a clue about what they are:
1: mgi0
2. mgi1
3. mv0
4. mv1
5. lo0
6. wlan0
7. wlan1
8. pppoe0
9. bridge0
The "pppoe0" interface is self evident. That's the overall traffic in and out of the router to the Internet.
But I also want to monitor the traffic on my local computer, which is a Macbook Pro connected thru wifi. I also have a few other windows boxes on the LAN using wifi or ethernet connect.
So I need to what those interfaces are.
Is there any documentation regarding the network interfaces of the AEBS?

Gabriel Dillaine wrote:
Now after setting up the SNMP client, it shows so many interfaces the AEBS has, and most names of the interfaces cant give me a clue about what they are:
This post on another forum will explain some of those:
http://forums.macrumors.com/showthread.php?t=846079

Muvo² 4 GB USB and recovery probl

Hello,
i own my Muvo for 8 months now. Yesterday it woke up and did not want to do anything, so i started recovery. I can clean media, format everything ... but i can't get an USB connection. Sometimes the Muvo even says media error while trying to connect to the PC. Is there any way i can fix it on my own ? I tried everything i could find with the search. Tested the Muvo on 2 PC?s.
Thanks
StefanMessage Edited by slame on 06-28-2005 05:03 PM

Tried a new cable also?
If so, then you've done all you can and the player is faulty. Are you in warranty? If so, contact support. Even if not, you might want to contact support for an out of warranty repair.

Zen Touch has connection probl

Hello,
I have my Zen Touch for about a month now, great thing, but now I have a irritating problem. Everytime I connect my Zen with the USB cable, and I want to open 'this computer' it doesnt do anything, except for showing the little flashlight
http://img474.imageshack.us/img474/650/flash7qn.jpg
When I open 'creative mediasource organizer', click on 'import tracks', then 'this computer' wont open also. Can anyone help me because on this way I cant do import songs to my Zen anymore.
best regards,
bram

No bother!
Connect your player up to the power source, as if you were going to charge it. Make sure it is turned off! There's a wee hole on the side of the player, near the 'random' button. Push a paper clip down that and hold the 'play button until the screen wakes up. You should now be in recovery mode. Now scroll down to 'clean up' and there you have it! It doesn't take too long. When you connect it up to the computer next, it should update the library information- just click on my computer when it's back to normal and you *should* be ok...

USB has a probl

Similar Messages

Maybe you are looking for