Usb hotspot is not working anymore since i installed itunes 10.6.3

USB hotspot is not working anymore... since i installed itunes 10.6.3
Please help me... how can i fix it.
I have wondows 7.

1.- Thanks for answering.
2.- I think I did not explain myself properly: The iPod is detected by both Windows and iTunes 10.5.3 64bit version.
The problem lies in that now after all the failures and the loss of my music (imagine I have to rip my entire CD collection again) whenever I try to sync my iTunes collection to my iPad (either on a single batch or album by album) a -50 o -69 error appears.
UPDATE: Now whenever I connect my iPod to the computer, it is recognized by Windows, but iTunes tells me that I have to restore it.
I cannot but commend Apple Inc. on his efforts to make a 9 months iPod unsuable. Sincerely this has brought me back to the worst of the 90s with MS.
UPDATE 2: Please let me add that with the previous iTunes version everything was ok. But, as soon as I installed the new Itunes (10.5.3 64bit) version the misery began. Unfortunately when I try to install the previous version I'm not allowed by the program and am referred to the newest buggy one.
Message was edited by: jesuslpgc

Similar Messages

OSX: Connecting to admin session not working anymore since 8.0.12

Hey
It seems to me that connecting to console session does not work anymore since the recent update to 8.0.12. Had no troubles before the update, now it does not connect to the console session but a normal one. Please fix this.
Mac OSX 10.9.5, Apple Remote Desktop 8.0.12
Cheers, Marcel.

Hey Dharmesh,
Thanks for your reply. I mixed up terms. I cannot connect to the "admin session", in my last message I used the term "console session", sorry about that. Connecting works, but it connects normally instead of the admin session. Checkbox
"Connect to admin sesssion" is active.
In the logs I found the following message. Not sure it's related to my problem.
Cheers,
Marcel
[2014-Dec-11 08:20:11] RDP (0): correlation id: 012580ec-dbe5-8db2-a2c0-1c58dfb00000
[2014-Dec-11 08:20:11] RDP (0): Resolved 'replaced.host.name.com' to '1.2.3.4' using NameResolveMethod_DNS(1)
[2014-Dec-11 08:20:11] RDP (0): Exception caught: Exception in file '../../librdp/itotlayer.cpp' at line 875
User Message : Security negotiation Error: NotAllowed(2)
[2014-Dec-11 08:20:11] RDP (0): correlation id: 012580ec-dbe5-8db2-a2c0-1c58dfb00000
[2014-Dec-11 08:20:11] RDP (0): Resolved 'replaced.host.name' to '1.2.3.4' using NameResolveMethod_DNS(1)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Dec-11 08:20:11] RDP (0): **** User ACCEPTED connection to basic security host
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Dec-11 08:20:40] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Dec-11 08:20:40] RDP (0): Protocol state changed to: ProtocolActive(5)

All my movies not working anymore since download the new version OS X 10.9.4

all my movies not working anymore since download the new version OS X 10.9.4

Hi Jeff,
In Safari I get this error message: Safari can't open "aam://SAP...[link of the download]" because OS X doesn't recognize internet address starting with "aam:". I thought it was a browser issue (I can't click the download button in Chrome) so downloaded FireFox but it also gives me an error message saying: Firefox doesn't know how to open this address because one of the following protocols (aam) isn't connected to any program or allowed in this context.
I don't have Creative Cloud Membership, I received a CD with Photoshop Lightroom 5 with my new camera from Samsung. Because my MacBook Air doesn't have a DVD drive I figured I should download it. Couldn't find Lightroom 5 in the Appstore so I figured I should download a trial version and simply add the key from the DVD. Unfortunately I can't even download the trial version due to these error messages.
Hope you can help!
Thanks,
Ivana

I have a macbook 2006 its hard drive was not working anymore so i install a new 500GB hard drive but now i just need the software. Which one should i buy?

I have a macbook 2006 its hard drive was not working anymore so i install a new 500GB hard drive but now i just need the software. Which one should i buy?

Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
You can buy Snow Leopard at:
Snow Leopard disc source - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
You could contact Apple Support and see if they have the original discs for that machine but it would be 10.4.11 and there's no reason not to go to at least Snow Leopard, especially since the 10.6 discs would probably cost the same as a replacement set of 10.4.11

HT6114 my audio midi setup is not working correctly since the install of maverick os

my audio midi setup is not working correctly since the install of maverick os

The upgrade may have reset to default settings ..
Check System Preferences > Sounds > Output
Make sure the correct device is selected and the Mute box is not checked.

Usb and firewire not working anymore after ftdi driver installation

hello there,
i had to install the ftdi driver (http://www.ftdichip.com/Drivers/VCP.htm) in order
to use my dive computer with macdive 2.
now after i have done that, my mbp does not recognize my usb 2.0 card reader anymore.....
also my firewire 800 cf cardreader is not recognized.....any ideas, where to start. i just
moved from windows to mac and i am really lost.....
brgds
christoph

Hi all, in answer to the above suggestions:
No the 10g database and listener is completely down (no services belonging to the new 10g database are running). I checked also alle the logs, but no messages anymore since saturday.
What I did notice: Oracle92HTTPserver (a service normally started automatically) does not start. When I start it, it gives me a message that there is nothing to do and that the service therefore is not started. So the HTTP-server itself is not working anymore. I can't find any files changed by th installation in the Ora92 home Apache directories. All seems as it was before the installation And still it won't start....
Does anybody have other suggestions? Please help.
Thanks in advance,
Jan.

Wi-Fi auto sync feature not working anymore since iOS 7...

I have noticed that the Auto Sync with iTunes feature does not work since I installed iOS 7 on my iPhone 4S. Wi-Fi is ON, the iPhone is on the docking for charging and nothing happens. Did I missed something ??? Am I the only one with this problem ?
Thanks !

I got it finally !!! You have to have both these options checked :
Work like a charm after this
Cheers,
Torp

USB Audio Interface not working anymore

I have a Presonus Audiobox USB Audio Interface. Worked perfectly until I updated to Mavericks, now I get a screeching noise when used and the sound switches to the built in Mac sound.
So then I reboot and it does it again. The Audio box doesnt have any software since its a plug and play. Any help?

Hi ketpiano!
I have an article here for you that may help you resolve this issue:
Macintosh: Solutions for noise in the audio signal
http://support.apple.com/kb/HT2743
Thanks for using the Apple Support Communities!
Cheers,
Braden

Q10 speaker doesn't work anymore since I installed the OS 10.2.1.537

Hi all,
I'm experiencing troubles with the speaker of my Q10 since I've installed the OS update 10.2.1.537. All the other sound devices work well (loudspeaker, headset).
Do you have something to troubleshoot this issue?
Cheers,

I have the same problem, although the issue did not arise immediatel after the installation of OS 10.2.1.537 and so I am not sure if it is connected.
I ran the Audio Test on Blackberry Virtual Expert - the only tests that failed were Receiver Audio and Headset Plug.
I am hoping that this is a software issue rather than hardware (as the phone is no longer under warranty), but given the number of owners that this issue seems to have impacted, it would be helpful if someone from BB would clarify the position.
And yes, before anyone asks, I have tried increasing the phone volume...

Gmail not working right since Mavericks install, even after 10.9.1 upgrade

I use Apple mail. Comcast, which is POP, is my internet provider. In order to use IMAP capability I forward my email to my Gmail acct. All worked flawlessly until Mavericks came along. Even after the 10.9.1 upgrade
Here are my issues:
(1) draft emails are copied every minute so I get multiple drafts like this:
Hello
Hello John
Hello John, how
Hello John, how are you?
(2) If I send myself an email to test how my email is working if I delete the received email from the inbox it deletes itself from the sent box. If I delete the email from the sent box it deletes the email in the inbox.....
(3) and nothing is being saved on the Gmail server although my settings indicated "never" remove the email.
Any thoughts? It's drviing me crazy & I'm afraid I'm going to lose valuable emails....
Thanks in advance....
Jim

I decided to test Mavericks Mail with a new Gmail account today to see what the new default settings in Mail works with Gmail. It seems that all the workarounds we used prior to Mavericks are no longer needed. No root folder required. No prefix [Gmail]/ for folders.
I no longer had to use "Use this folder for Drafts, Sent, Junk, Trash". When I delete a message it actually goes to Trash not to All Mail. Yipeee!
Be sure to select All Mail folder.

Time machine does not work right since Lion install

I successfully used my 500GB Simpletech external drive with Time Machine while using Snow Leopard. Since I upgraded to Lion, my computer is constantly showing me this eject error and the backups are constantly interrupted-
This error seems to happen each interval of the Time Machine backup. Anyone have an answer for this or a work around?

I successfully used my 500GB Simpletech external drive with Time Machine while using Snow Leopard. Since I upgraded to Lion, my computer is constantly showing me this eject error and the backups are constantly interrupted-
This error seems to happen each interval of the Time Machine backup. Anyone have an answer for this or a work around?

The google suggestions when I type in the search box are not clickable anymore since I installed Firefox 4. Why could that be?

It used to be when I typed in the Google search field at the top of the screen, a list of suggestions would appear. When the suggestion matched my search I would stop typing and click on it. Then the search would start. After installing Firefox 4 the suggestions still show up but nothing happens when I click on them. I have to complete entering it and then click on the search button. Any ideas?
Thanks.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Wireless All-in-One B110 is not working anymore ?

Hello dear, my All in One is not working anymore since 2 weeks. Could you solve the problem for me please ?
Thank you so much
Peggy [edited personal information by Moderator]

Hi, take a look at this link for a possible fix.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

All my GPS Apps are not working anymore after upgrading to OS4

Hi folks,
all my GPS APPS are not working anymore since I upgraded to OS4.
I am living in Germany and using Iphone 3GS 32GB.
Are there any plans from apple to resolve this issue shortly ß Or shuld we
chance to google or Microsoft produkts....?

I'm getting very interested in GPS problems across the entire iOS device range. Ive got a 3GS and the GPS satellite fix stopped working completely recently. A fix identified using jailbreak and an ssh terminal tells me a good proportion of these problems are with locationd, the gps process in the iPhone, or more accurately, I think that it's possible for some of the data this process uses to become corrupted; the "fix" involves stopping the process and deleting the data it uses. On restart, locations is forced to rebuild the data, and everything then works.
I suspect this is true across the iPhone range - and worse, I think that the backup function in iTunes actually backs up the bad data. Thus, when you restore from backup, you actually put the problem back in! Either that, or GPS cache data isnt deleted when the iphone is restored.
What we need is an option in iTunes, or the iPhone settings, to clear GPS ephemeris and related data down and restart locationd: this will save apple a fortune in support at genius bars, as I reckon everyone who is getting a replacement is just getting a reblanked refurbished iPhone with no hardware fixes - they could be turning them around in the back of the stores!
We need to get some group pressure together to get an answer out of apple on this really - they do seem to have an approach which has much in common with the way the UK banks were dealing with overdraft fees - if you complained, they refunded just to keep you quiet and make sure you didn't shout. If this issue is an underlying gps driver or application demon issue, they should give us a way to work around the issue.

Usb wireless mouse not working after latest -Syu

after todays kernel upgrade to :
Linux archie 3.7.4-1-ARCH #1 SMP PREEMPT
my usb mouse is not working anymore, The touchpad still works fine
lsusb: Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
any ideas?

resolved: alternate usb-wireless mouse works fine - it's the battery!!
oh well

Usb hotspot is not working anymore since i installed itunes 10.6.3

Similar Messages

Maybe you are looking for