USB hub not working corectly with fingerprint sensor

Hello everyone i have freak problem with usb hub and fingerprint sensor. In device manager i have in USB ports one unkonwn device not reorganized with yellow triange. In descripton is : standard usb host controller code 43, localization: Port_#0003.Hub_#0004, equivalent element : USB\VID_138A&PID_0018\2ce0e90c7b76.
But this say that is fingerprint sensor who fully working and is installed .... **bleep** ?!
When I turn off third usb hub unknown device gone with fingerprint sensor .... (USB\ROOT_HUB&VID1022&PID7807&REV0011)
Whats wrong with this mainboard ?! system reinstall does not help...

Hi @pheonix1 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6b15ew Notebook and issues with the Fingerprint Reader. Here is a link to troubleshoot the Fingerprint Reader.
I would just start at the top and work my way down. Enabling biometric support should resolve this issue.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

USB-Hub not working on LEFT USB port?

Hello,
I have installed Windows 7 Ultimate 64 Bit on my MacBook Pro 13" Retina (Early 2013) and it's running fine. Boot Camp version: 5.0.5033.
But I have one problem: I bought an external monitor (Dell U2414H) which has an built-in 4-Port USB 3.0 hub. So I connect the Dell monitor using a DisplayPort 1.2a cable and an USB 3.0 cable. But Windows only recognizes the monitor's built-in USB hub when I plug the USB cable into the right USB port (when I sit in front of the MacBook). Then it works without problems. But when I plug the USB cable into the left USB port of the MacBook Windows only says "USB device not recognized". But other devices like USB sticks and USB drives also work without problems on left and right USB port of the MacBook. Also when I boot in OS 10.9 Mavericks the monitor's USB hub is working on both USB ports of the MacBook. So I think it isn't a hardware failure. I also re-installed Windows, but I have still the same problem.
Do you have any idea, why only the monitor's built-in USB hub is not working in Windows on the left port of the MBP or even how I could fix it?
Is Boot Camp 5.0.5033 the most current version? I checked the box to download the latest Windows support software and also didn't find anything newer than 5.0.5033 to download, but sometimes I read about 5.1.1 - but where could I download it? AND: Doest it help?
Thanks in advance!

I think I've hit a variation on the problem you're enoucntering. I have a late-2013 13-inch Macbook Pro Retina. I've just installed Boot Camp and a copy of Windows 7 Pro. This is my first experience with Boot Camp and Windows on a Mac, so I'm in foreign teritory.
The install all went fine and Windows 7 booted up fine and so far, all hardware seems to be working as expected, with one exception. Things went sideways when I tried use it in "clamshell" mode - lid closed with external monitors and all my peripherals attached to a USB hub. I set up Boot Camp to boot into Windows and attempted to boot. It would give me the usual boot-up fanfair and a then a gray screen for a few seconds, and then it would reboot. It just rebooted over and over. I eventually discovered the issue was the USB hub - without the hub connected , it would boot just fine. Once it was booted into Windows, I could attach the the hub and everything would be recognized normally. Furthermore, I could put the system in sleep mode, wake it up and everything would be working fine. But it simply refuses to boot the USB hub attached. I've stumbled on a couple related threads - see https://discussions.apple.com/message/23802231#23802231. The suggestion is that only certain hubs to not work. I've got two different high quality powered hubs and both display the same behaviour. The other point is, that when booting into OS X with the same hub, it works perfectly. So it's a strange problem.
Note that after reading your post, I did try the hub in both right and left USB ports and that made no difference in my case. I do have one more hub to try (built into my Dell monitor). I'll report back if that happens to work.

USB Hub not working

I have a hub which has worked fine but is now no longer working. A light on it still lights up and it is recognized in System Profiler. Also items plugged into it are also recognized in System profiler.
Any ideas?
Thanks
John

Have you tried a new USB cable between the computer and the USB hub?
And if another USB port than the one being used now, has not been tried
to see if the issue is in one port on the computer, and not another, try it.
Also, sometimes the lights are on, but nobody is home. The hub can be
bad and still appear to be there.
{Have you tried the computer with only the keyboard and mouse attached?
If that works OK, then consider the limits of port power to run other USBs.
Then, a new powered USB hub may work, if the Mac's ports aren't bad.}
There may be a low-power situation (assuming USB hub is powered) that
somehow does not translate into a notice or 'warning dialog box' on screen.
Perhaps one of the connectors in a USB cable or in the computer's USB
ports, necessary for data flow, is not working correctly?
At one point, I'd bought a two pack of powered USB hubs; to find one of
them did not work right out of the box. It was un-powered, yet the AC
adapter supplied adequate power. Items appeared in Sys Profiler, yet
if more than one were used, the Mac's ports could not sustain them.
The package was such a low price, I kept the working one; the store I'd
bought them from no longer had any in stock. The good one still works.
Have you tried to reset the SMC or 'power management' unit device?
This may be a last effort of desperation & signals a service tech visit.
Good luck & happy computing!

Belkin Network USB Hub not working with new BT Rou...

Hi,
I received my new hub to use with Infinity when they turn it on in a few days time.
I connected the new router to the ADSL and all works perfectly without any set up needed.
I installed (on my old 'sheep-dip' PC) the BT software, and now this test PC will not connect to any USB hard-drives or Printers connected to my Belkin Network USB hub.
The Network USB hub works fine with all the other PCs in the house - but not if I install the BT software.
(Which appears to be mainly adverts and a link for those too dim to type BT.com in a browser... ;o)
I am guessing that this may be something to do with the software blocking use of the new BT Router using its own USB socket as a Network USB link - as this is being saved for 'future product enhancements'. Is there anyway of curing this and still having the BT software on this machine?
Thanks!

Is this issue likely to go away when the Infinity service starts? - I am guessing not?

Usb hub not working (worked with G3)

Help! I have a wonderful GE brand 4-port USB hub, which I used for several years without a single problem with my old beige G3. It plugged right into the USB port and everything I plugged into it popped right up and worked fine.
On my new iMac, nothing will connect through this hub. The peripherals work great when connected straight to the computer, but not through the hub. I've perused several forums, but to no avail. Anyone have this problem or know what I need? Does it have to do with the Intel processor? GE will not help, saying it is an Apple issue (since it worked fine before).
Thanks in advance,
Jen

Does your new mac have a USB port in the keyboard that you're using? That port has not supplied enough power to ork with devices that need to get power.
Can you plug it into a different port in the iMac? Side of the monitor have a port?
Can you confirm that this little hub really does still work? Got the old G3 still hooked up somewhere?

USB Hubs not working

Hi
I've been trying to connect a usb hub to my iMac and have tried all types of brands (Belkins, unknowns) and none of them seems to work. There's either no connection at all, or it works for a day or two then it starts to disconnect intermittently. I'm at wits end. Any advice appreciated. I'm just trying to connect a printer, iPod and mini-usb cables to the hub to sync my devices. Thanks.

I agree with the other poster that you need a powered USB hub. I've been using one from Cable to Go for about 6 months now and it works great, have never had an issue with it. [Click Here.|http://www.amazon.com/Cables-Go-Port-USB-2-0/dp/B000IZDN60/ref=pdbbs_sr2?ie=UTF8&s=electronics&qid=1219431869&sr=8-2] There are various others available I just like this one because it's small and sleek.
--Brian

HT2494 imac and usb hub not working

My iMac won't recognize anything plugged into my powered usb hub. Its a dynex from Best Buy. Only 2 months old and gets more finicky with time. Nothing of significance power is plugged into it. Have a flash drive and small garmin gps I download info off of. Any suggestions?

Have you tried other ports to plug the hub into?

My toshiba satellite e105-s1802 do not recognized my a4tech pocket usb hub pls help me with this?

my toshiba satellite e105-s1802 do not recognized my a4tech pocket usb hub pls help me with this?

I AM HAVING THE SAME PROBLEM WITH THE SAME MODEL. I GOT THE SERVICE
MANUAL AND I'M THINKING TO OPEN IT AND SEE IF THERE'S SOME PHYSICAL BAD CONNECTION
INSIDE. BUT LIKE YOU SAID. IT'S ONLY THREE MONTHS OLD.!!! I DON'T WANT TO RUIN THE WARRANTEE.
BUT THIS IS VERY FRUSTATING. I WANDER IF TOSHIBA DOES THIS ON PURPUSE.!!! KEEP IN TOUCH AND
IF YOU NEED THE SERVICE MANUAL CONTACT ME AT [email protected]
THANK YOU.!!!!

USB-hub stopped working after upgrading

I have a macbook pro 13 inch, year 2011.
On my desk, I attach it to a thunderbolt display. To those USB-ports, I attached the belkin desktop USB hub (model F4U017) with 7 USB ports.
All worked fine and without a glitch untill I upgraded to OSX Moutain Lion.
Suddenly it won't connect annything I plug into it.
All the cables of the hubb still work fine, those have been tested.
When I tested the hub with a very old iMac (i think still with leopard it), it worked again.
To be sure, I also tested a 4-port hub without external power supply on moutain lion. That one still works fine.
How come my 7-port hub won't work any longer? How can I make it work?

Not sure. Might be an issue with the USB drivers in mountain lion.
I've had an issue with a couple hubs not working after plugging back into my macbook pro while it's on.
Fixed by restarting my computer, but that's super annoying and takes me back to my Win 95 days. Never saw this issue before I upgraded to mountain lion.

USB- hub stopped working after upgrading to OSX Mountain lion

I have a macbook pro 13 inch, year 2011.
On my desk, I attach it to a thunderbolt display. To those USB-ports, I attached the belkin desktop USB hub (model F4U017) with 7 USB ports.
All worked fine and without a glitch untill I upgraded to OSX Moutain Lion.
Suddenly it won't connect annything I plug into it.
All the cables of the hubb still work fine, those have been tested.
When I tested the hub with a very old iMac (i think still with leopard it), it worked again.
To be sure, I also tested a 4-port hub without external power supply on moutain lion. That one still works fine.
How come my 7-port hub won't work any longer? How can I make it work?

Not sure. Might be an issue with the USB drivers in mountain lion.
I've had an issue with a couple hubs not working after plugging back into my macbook pro while it's on.
Fixed by restarting my computer, but that's super annoying and takes me back to my Win 95 days. Never saw this issue before I upgraded to mountain lion.

My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

Windows 7 (Ent) Sp1 on server 2012 R2 HyperV, RFX USB redirection not working

Hello,
I currently have windows server 2012 R2 with HyperV installed. I have built two virtual machines. A windows 8.1 and Windows 7 sp1. Both are enterprise editions
For RemoteFX the hypervisor is using a Zotec GTX 760 GPU. It recognizes it and uses it to apply remoteFX adapter on my Windows 7 Sp1 VM.
As you are aware I do not need to use a GPU to enable RFX on my Windows 8.1 it can do this without the need of a GPU.
Using an RDP client( v8.1) I can connect to my Windows 8.1 VM with a USB headset,memory Key or a printer and they all enumerate on the Virtual machine. The driver for each device installs
and I can use the device without any issues.
However this issue lies with the Windows 7 SP1 VM. I can connect to it via RDP( Same client) but I cannot redirect any devices to it. I have installed the latest integration services available on the VM. I have ran all updates available.
Because I have ran all updates the rdp version on the VM is running v8.1.
Previous to installing the updates USBr still was not working
I have enabled the following group polices under remote desktop services on the Windows 7 SP1 VM :
RDP 8.0 -- Enabled
Configure RFX -- Enabled
Is there a known issue with USB redirection not working on a Windows 7sp1 virtual machine hosted on server 2012 Hypervisor ??
Many Thanks
Brian

Hi,
According to the log above, I found that we run the script on both Server6 and Server7. Errors as below:
Server6: Conversion is not supported in restricted language mode or a Data section.
Server7: Couldn't figure out valid servers from the specified destination scope. Check your parameters and try again.
Since we can only run the RollAlternateserviceAccountPassword.ps1 Script on CAS server, the script not works well if Server6 is MBX server.
For Server7, based on the error message, it seems you still have no right to run the script/cmdlet.
Please add your account to Organization Management Role group(ADUC->domain.com->Microsoft Exchange Security Groups) to test if possible.
By the way, from Technet:
You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "Client Access Security" entry in the Client Access Permissions topic.
Client Access Permissions
http://technet.microsoft.com/en-us/library/dd638131.aspx
Feel free to contact me if there is any problem.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Dual-Boot; Restart and boot other o/s USB devices not working

I have issue with my msi z97-g43 mobo and Windows dual o/s PC.
Booting with win-8.1, USB devices working very well.Restaring windows 8.1 have NOT any issue.
After shutdown & start PC, choosing to boot windows 7 on bootmanager, USB devices not working in Win-7.
System no hang or occur any error/BSOD message.All startup programs run as normal.
I tried to re-plug usb devices but notting happens... Still not working
But after the win-8.1 shutdown, if i switch off PSU power button, watting ~1 munute for discharge.
After power up PC and boot with windows 7 all usb devices works normaly.
I checked all internal connections. 2 times disassembly all hardware and re-built system, nothing changed.All windows updates and latest drivers installed.
I'm sure other H/W is OK, but I thnik this mobo have a fault.

Thank you for reply.My PC system specs:
CPU:    Intel Pentium G3258 3.2ghz
Board:    MSI Z97-G43 /Bios: Ver. V17.7
MEM:    G.Skill Ripjaws 2x4gb DDR3-1600mhz cl9 1.5v F3-12800CL9-4GBRL
VGA:    Sapphire AMD Redeon HD6670
CASE:    Zalman z3 plus white (5x 120mm fan)
PSU:    Thermaltake Litepower 500w (12v1+12v2=36amp)
HDD-1:    Seagate 1TB ST1000DM003 /HDD-2: Seagate 2TB ST2000DM001
COOLER:    Akasa 92mm PWM Blue Led
OC:    CPU:Default /MEM: X.M.P mode=1600mhz 9-9-9-24-2t 1.5v
O/S:    Win7 x64 PRO + Win8.1 x64 PRO (Genuine)
All hdd's have MBR based partition table.Windows 7 & 8.1 installed in non-efi mode.In BIOS Boot sequence is setting up to non-efi Boot(system) drive as primary.
Before I suspect maybe have a short circuit to pcb or similar thing cause this issue.I take out all parts outside the chassis, and ran this system on the antistatic bag and box.Nothing has been changed.
I have Cooler Master Devastator(MB24 + MS2k) USB keyb+mouse set and tplink wn722n usb wireless dongle.
I have one more pc,based on AMD 970+SB950 chipset mainboard and AMD CPU.I exchange all parts to this amd mainbaord and tested for faulted hardware.All intel system H/W's is ok.All works great
Dual boot works perfectly.Not needs to switch off psu/power back and run system again.
I think msi z97-g43 mainbıoard have a problem.

SA30 USB do not work after reinstall, please help!!

Hi, my SA30's USB do not work at all after reintalling, I do not have the original CD with the laptop as it is a gift from my mate.... I couldnt find the driver from the website, please could anyone help me???
I could use the USB mouse but when I plug the external hard disk in, it has no responses, I tried to search for new hardware, it couldnt detect it. Any information would be appreciate, cheers.

When you instll another OS than the recovery OEM OS you have to install the drivers and tools in a right order!
This order is on the Tools & Utilities CD in a html file! When you follow these order all hardware should be detect!
Also you can go to http://eu.computers.toshiba-europe.com and download the drivers
Bye Hans

4530s DC CARD or USB BOOT not working even if it has this option in bios

i just posted a message but i think it's in the wrong section..
http://h30434.www3.hp.com/t5/Other-Notebook-PC-questions/sd-card-boot-and-usb-boot-not-working/m-p/9...
Hi, i just got a HP ProBook 4530s , I5 processor, Intel HD 3000 , i have a problem with it, i can't boot on any usb or sd card, i tried all linux versions i could find and also some live windows and bartPE, on my sd card i get the "Disk read error" as soon as i choose the booting device and on usb it goes a little bit further i can see the linux logo some processes starting and then same error related to write on disk, the sd card and usb are not in read only mode and on my other laptop a older one 6730s everything works...
Also all the usb and sd card work perfect in windows, when i boot from internal HDD.
Is there a fix for it?? Or can anybody that has this laptop test if it works booting from usb or sd card, maybe it's a problem with this unit..
i have tried all available bios verions and various usb devices but as i said the usb sticks all worked on my other laptop but not on this one.
Oh and also is there a bios option to stop virus check on boot? as far as i could test that is the only option in bios that is not there and i can't test with it ON/OFF.. any help would be apreciated because i can return the laptop for 30 days and i allready have it for one week. and i really need this option to work.
PS - sorry for my bad english but i'm from Europe

Quote from: Svet on 13-May-12, 00:13:31
do >>Clear CMOS Guide<< with power cord removed
Yes, I've tried this. I pulled the power cable, waited two minutes, hit the CMOS button, and also removed the battery, and waited another minute.
After which, I loaded optimized defaults, but the problem remains.
Thanks,
Ice Piq

USB hub not working corectly with fingerprin​t sensor

Similar Messages

Maybe you are looking for

USB hub not working corectly with fingerprint sensor