Usb hub not working (worked with G3)

Help! I have a wonderful GE brand 4-port USB hub, which I used for several years without a single problem with my old beige G3. It plugged right into the USB port and everything I plugged into it popped right up and worked fine.
On my new iMac, nothing will connect through this hub. The peripherals work great when connected straight to the computer, but not through the hub. I've perused several forums, but to no avail. Anyone have this problem or know what I need? Does it have to do with the Intel processor? GE will not help, saying it is an Apple issue (since it worked fine before).
Thanks in advance,
Jen

Does your new mac have a USB port in the keyboard that you're using? That port has not supplied enough power to ork with devices that need to get power.
Can you plug it into a different port in the iMac? Side of the monitor have a port?
Can you confirm that this little hub really does still work? Got the old G3 still hooked up somewhere?

Similar Messages

  • Belkin Network USB Hub not working with new BT Rou...

    Hi,
    I received my new hub to use with Infinity when they turn it on in a few days time.
    I connected the new router to the ADSL and all works perfectly without any set up needed.
    I installed (on my old 'sheep-dip' PC) the BT software, and now this test PC will not connect to any USB hard-drives or Printers connected to my Belkin Network USB hub.
    The Network USB hub works fine with all the other PCs in the house - but not if I install the BT software.
    (Which appears to be mainly adverts and a link for those too dim to type BT.com in a browser... ;o)
    I am guessing that this may be something to do with the software blocking use of the new BT Router using its own USB socket as a Network USB link - as this is being saved for 'future product enhancements'.  Is there anyway of curing this and still having the BT software on this machine?
    Thanks!

    Is this issue likely to go away when the Infinity service starts? - I am guessing not?

  • USB hub not working corectly with fingerprin​t sensor

    Hello everyone i have freak problem with usb hub and fingerprint sensor.  In device manager i have in USB ports one unkonwn device not reorganized with yellow triange. In descripton is : standard usb host controller code 43, localization: Port_#0003.Hub_#0004, equivalent element : USB\VID_138A&PID_0018\2ce0e90c7b76. 
    But this say that is fingerprint sensor who fully working and is installed .... **bleep** ?! 
    When I turn off third usb hub unknown device gone with fingerprint sensor .... (USB\ROOT_HUB&VID1022&PID7807&REV0011) 
    Whats wrong with this mainboard ?!  system reinstall does not help... 

    Hi @pheonix1 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6b15ew Notebook and issues with the Fingerprint Reader. Here is a link to troubleshoot the Fingerprint Reader.
    I would just start at the top and work my way down. Enabling biometric support should resolve this issue.
    Please let me know how this goes.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • USB-Hub not working on LEFT USB port?

    Hello,
    I have installed Windows 7 Ultimate 64 Bit on my MacBook Pro 13" Retina (Early 2013) and it's running fine. Boot Camp version: 5.0.5033.
    But I have one problem: I bought an external monitor (Dell U2414H) which has an built-in 4-Port USB 3.0 hub. So I connect the Dell monitor using a DisplayPort 1.2a cable and an USB 3.0 cable. But Windows only recognizes the monitor's built-in USB hub when I plug the USB cable into the right USB port (when I sit in front of the MacBook). Then it works without problems. But when I plug the USB cable into the left USB port of the MacBook Windows only says "USB device not recognized". But other devices like USB sticks and USB drives also work without problems on left and right USB port of the MacBook. Also when I boot in OS 10.9 Mavericks the monitor's USB hub is working on both USB ports of the MacBook. So I think it isn't a hardware failure. I also re-installed Windows, but I have still the same problem.
    Do you have any idea, why only the monitor's built-in USB hub is not working in Windows on the left port of the MBP or even how I could fix it?
    Is Boot Camp 5.0.5033 the most current version? I checked the box to download the latest Windows support software and also didn't find anything newer than 5.0.5033 to download, but sometimes I read about 5.1.1 - but where could I download it? AND: Doest it help?
    Thanks in advance!

    I think I've hit a variation on the problem you're enoucntering.  I have a late-2013 13-inch Macbook Pro Retina.  I've just installed Boot Camp and a copy of Windows 7 Pro.  This is my first experience with Boot Camp and Windows on a Mac, so I'm in foreign teritory.
    The install all went fine and Windows 7 booted up fine and so far, all hardware seems to be working as expected, with one exception.  Things went sideways when I tried use it in "clamshell" mode - lid closed with external monitors and all my peripherals attached to a USB hub.  I set up Boot Camp to boot into Windows and attempted to boot.  It would give me the usual boot-up fanfair and a then a gray screen for a few seconds, and then it would reboot.  It just rebooted over and over.   I eventually discovered the issue was the USB hub - without the hub connected , it would boot just fine.  Once it was booted into Windows, I could attach the the hub and everything would be recognized normally.  Furthermore, I could put the system in sleep mode, wake it up and everything would be working fine.  But it simply refuses to boot the USB hub attached.  I've stumbled on a couple related threads - see https://discussions.apple.com/message/23802231#23802231.  The suggestion is that only certain hubs to not work.  I've got two different high quality powered hubs and both display the same behaviour.  The other point is, that when booting into OS X with the same hub, it works perfectly.  So it's a strange problem.
    Note that after reading your post, I did try the hub in both right and left USB ports and that made no difference in my case.  I do have one more hub to try (built into my Dell monitor).  I'll report back if that happens to work.

  • USB Hub not working

    I have a hub which has worked fine but is now no longer working. A light on it still lights up and it is recognized in System Profiler. Also items plugged into it are also recognized in System profiler.
    Any ideas?
    Thanks
    John

    Have you tried a new USB cable between the computer and the USB hub?
    And if another USB port than the one being used now, has not been tried
    to see if the issue is in one port on the computer, and not another, try it.
    Also, sometimes the lights are on, but nobody is home. The hub can be
    bad and still appear to be there.
    {Have you tried the computer with only the keyboard and mouse attached?
    If that works OK, then consider the limits of port power to run other USBs.
    Then, a new powered USB hub may work, if the Mac's ports aren't bad.}
    There may be a low-power situation (assuming USB hub is powered) that
    somehow does not translate into a notice or 'warning dialog box' on screen.
    Perhaps one of the connectors in a USB cable or in the computer's USB
    ports, necessary for data flow, is not working correctly?
    At one point, I'd bought a two pack of powered USB hubs; to find one of
    them did not work right out of the box. It was un-powered, yet the AC
    adapter supplied adequate power. Items appeared in Sys Profiler, yet
    if more than one were used, the Mac's ports could not sustain them.
    The package was such a low price, I kept the working one; the store I'd
    bought them from no longer had any in stock. The good one still works.
    Have you tried to reset the SMC or 'power management' unit device?
    This may be a last effort of desperation & signals a service tech visit.
    Good luck & happy computing!

  • USB Mouse not work with Mac OS 10.6

    I have a USB mouse can work with Mac OS 10.4 but cannot with Mac OS 10.6. Noticed the different is the USB mouse motion reporting is 12-bit instead of 8-bit. It can definitely work on Windows with standard USB HID driver. I wonder if the OS 10.6 is having a different USB HID driver specification which is not posted in USB-IF.

    Ask the Vendor.

  • USB superdrive not working with Mac Pro

    Is there a trick to getting a USB Superdrive working with a Macpro?
    The drive in the Macpro no longer ejects and have tried connecting the USB drive to both the front and back ports - does it not work with Mac Pros?
    Any pointers in the right direction would be much appreciated.

    I had a problem my superdrive. It would play dvd's and cd's that were already burnt but would not burn blank DVDs or CDs- in the recent past it had no problems burning. In addition, the Finder would not display the superdrive. When I put a blank disc in it would go to Disk Utilities and would not allow burning. With help from Apple I discovered the problem-- The settings in CDS & DVDs had been changed from When you insert a blank DVD/CD "Ask what to do to  to  "GO to Disk Utilities". If this sounds like your problem try changing the settings to this:
    Try going to; System Preferences/ CDs & DVDs
    Change these two settings to this:
    When you insert a blank CD: Ask what to do
    When you insert a blank DVD: Ask what to do
    NOTE: If they are already set to this you probably have a different problem. If they are set to Go to Disk Utilitiy this is probably a solution.
    And
    Then go to Finder Preferences
    Make sure that under "Show these items on desktop:" that the checkbox for CDs, DVDs, and iPods is checked.
    Try to burn the DVD again (reload Disc- perhaps restart) and try again.
    Don't know how these setting changed but they did. It worked for me.
    Message was edited by: pj176

  • USB hubs quit working with 10.7.2

    I have a Mac Pro, dual quad-core 2.8GHz Xeon, 10GB ram. Three D-link DUB-H7 usb hubs. After the update to 10.7.2 and iTunes 5.0.1 (not sure exaclty when), my usb devices & hubs quit working properly. For a while they would work occasionally.
    I have a USB keyboard which works if it's plugged in directly when the computer boots. But other devices (external drives, flash card reader, iPod dock, USB display) don't work at all. I tested the hubs with another Lion system, and they work on that. iTunes wireless sync quit as well.
    I've tried resetting PRAM and SMC. Neither fixed the problem. Tried repairing permissions. No change. Rebooting (many times).
    Could it be a USB driver conflict? I removed VirtualBox usb drivers, as well as Parallels, but not vmware, which I also own.
    When I plug in a device, I get 'trouble enumerating' and then "The IOUSBFamily was not able to enumerate a device." in the system.log
    Any ideas? Is my motherboard dying? If so, why does the keyboard still work, and nothing else?

    Followup info. I reset the PRAM and booted into 10.5.1, on another drive.
    This time, similar behavior; HID devices (keyboard, mouse, bluetooth) work fine. Hubs (which work fine on another Lion computer!) generate a bunch of console errors:
    11/19/11 11:21:31 AM kernel USBF: 746.706 USB Device IOUSBHubDevice is violating Section 9.3.5 of the USB Specification -- Error in GetConfigDescriptor( wLength = 4)
    11/19/11 11:21:31 AM kernel USBF: 746.707 AppleUSBHub[0xf536000]::ConfigureHub No config descriptor
    11/19/11 11:21:31 AM kernel USBF: 746.707 AppleUSBHub[0xf536000]::start Aborting startup: error 0xe0004056
    11/19/11 11:21:31 AM kernel USBF: 746.707 IOUSBHubPolicyMaker[0xf536000]::start - ConfigureHubDriver returned false

  • USB Headset not working with alsa

    I have a razer megalodon usb headset which works fine in ubuntu and windows but for the life of me I cannot get it to work in arch.
    [exec@turbine ~]$ uname -a
    Linux turbine 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64 Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz GenuineIntel GNU/Linux
    1532:000e is the megalodon headset
    [exec@turbine ~]$ lsusb
    Bus 008 Device 004: ID 1532:000e Razer USA, Ltd
    Bus 008 Device 003: ID 1532:000f Razer USA, Ltd
    Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 002: ID 045e:028e Microsoft Corp. Xbox360 Controller
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 004: ID 046d:c227 Logitech, Inc.
    Bus 004 Device 003: ID 046d:c226 Logitech, Inc.
    Bus 004 Device 002: ID 046d:c223 Logitech, Inc. G15 Keyboard / USB Hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 004: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements]
    Bus 001 Device 002: ID 13fe:3100 Kingston Technology Company Inc. 2 GB USB stick
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    [exec@turbine ~]$ aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    default:CARD=Intel
    HDA Intel, ALC888 Analog
    Default Audio Device
    front:CARD=Intel,DEV=0
    HDA Intel, ALC888 Analog
    Front speakers
    surround40:CARD=Intel,DEV=0
    HDA Intel, ALC888 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Intel,DEV=0
    HDA Intel, ALC888 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Intel,DEV=0
    HDA Intel, ALC888 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Intel,DEV=0
    HDA Intel, ALC888 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Intel,DEV=0
    HDA Intel, ALC888 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=Intel,DEV=0
    HDA Intel, ALC888 Digital
    IEC958 (S/PDIF) Digital Audio Output
    Here's a relevant part of dmesg:
    usb 8-1: USB disconnect, address 2
    usb 8-1: new full speed USB device using uhci_hcd and address 4
    cannot find the slot for index 0 (range 0-1), error: -16
    cannot create card instance 0
    snd-usb-audio: probe of 8-1:1.0 failed with error -5
    [exec@turbine ~]$ asoundconf list
    Names of available sound cards:
    Intel
    # /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
    alias snd-card-0 snd-usb-audio
    alias snd-card-1 snd-hda-intel
    # /etc/modprobe.d/sound.conf
    #usb headset
    alias snd-card-0 snd-usb-audio
    alias sound-slot-0 snd-usb-audio
    options snd-usb-audio index=0
    Alsamixer does not show my megalodon usually but I have seen it under device list a couple of times but I have been unable to get it to play sound.
    Any help fixing sound would be appreciated greatly.

    Try running alsaconf, seems to help some people with a similar issue. http://www.nvnews.net/vbulletin/showthread.php?t=75433

  • Acer C710 - USB Ports not working with patched kernel

    I have an...
    Acer C710-844G01ii
    I have replaced the original SSD with a Mushkin 120GB SSD (MKNSSDCR120GB-7)
    I've used John Lewis' script at https://johnlewis.ie to flash the firmware. It works great. It loads 64 bit dual arch iso (2014.10.01) written to a USB flashdrive (Well, I'm actually using SD card in a USB reader. Not sure if that makes a difference) without having to utilize the workaround listed on the Chromebook wiki page (https://wiki.archlinux.org/index.php/Ch … stallation). I just create a regular arch bootable usb and it seems to work fine. I can use the bootable USB tools. I can install arch to the hard disk fine. (I did this a couple of times on the original SSD that came with the chromebook before I replaced it, so I know it works without having to change the SSD).
    The problem I'm having occurs after I install the patched kernel (linux-chromebook-3.16.4-1-x86_64 or linux-mainline-chromebook-3.17-1-x86_64 I've tried them both. Both times I wiped the hard drive and went through the entire install process from scratch). After booting, everything loads up fine except that I lose functionality of my USB ports. The custom BIOS still reads the arch bootable USB if I choose to boot into it. If I boot from the hard drive though, as soon as the patched kernel loads, the USB ports are not working.
    The output of
    dmesg | tail
    is the same before and after inserting a flash drive into a usb port.
    Running the command
    lsusb
    gives output
    unable to initialize libusb: -99

    Updated the system, now using arch kernel 3.17.1-1
    Problem still exists.
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.17.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=572dffe4-4501-4df5-967f-c535313cfa24 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acee3fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000acee4000-0x00000000af9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Google Parrot/Parrot, BIOS 4.0-6588-g4acd8ea-dirty 09/04/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: write-back
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-back
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0AD000000 mask FFF000000 uncachable
    [ 0.000000] 1 base 0AE000000 mask FFE000000 uncachable
    [ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable
    [ 0.000000] 3 base 0C0000000 mask FF0000000 uncachable
    [ 0.000000] 4 base 0D0000000 mask FF0000000 write-combining
    [ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xacee4 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] reserving inaccessible SNB gfx pages
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    [ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
    [ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
    [ 0.000000] [mem 0x14f400000-0x14f5fffff] page 2M
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
    [ 0.000000] [mem 0x14c000000-0x14f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
    [ 0.000000] [mem 0x100000000-0x14bffffff] page 2M
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x40200000-0xacee3fff]
    [ 0.000000] [mem 0x40200000-0xacdfffff] page 2M
    [ 0.000000] [mem 0xace00000-0xacee3fff] page 4k
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x379a0000-0x37cc7fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F6DD0 000024 (v02 CORE )
    [ 0.000000] ACPI: XSDT 0x00000000ACFEF0E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: FACP 0x00000000ACFF2720 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
    [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20140724/tbfadt-618)
    [ 0.000000] ACPI: DSDT 0x00000000ACFEF250 0034C7 (v02 COREv4 COREBOOT 20110725 INTL 20140114)
    [ 0.000000] ACPI: FACS 0x00000000ACFEF210 000040
    [ 0.000000] ACPI: HPET 0x00000000ACFF2820 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: APIC 0x00000000ACFF2860 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: MCFG 0x00000000ACFF28C0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: SSDT 0x00000000ACFF3900 000818 (v02 CORE COREBOOT 0000002A CORE 0000002A)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
    [ 0.000000] NODE_DATA [mem 0x14f5fa000-0x14f5fdfff]
    [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ac00000-ffff88014ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x14f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
    [ 0.000000] node 0: [mem 0x40200000-0xacee3fff]
    [ 0.000000] node 0: [mem 0x100000000-0x14f5fffff]
    [ 0.000000] On node 0 totalpages: 1032322
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 158 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10988 pages used for memmap
    [ 0.000000] DMA32 zone: 703204 pages, LIFO batch:31
    [ 0.000000] Normal zone: 5080 pages used for memmap
    [ 0.000000] Normal zone: 325120 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xada00000-0xaf9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x508
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xacee4000-0xaf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
    [ 0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88014f200000 s86848 r8192 d23744 u1048576
    [ 0.000000] pcpu-alloc: s86848 r8192 d23744 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1016032
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=572dffe4-4501-4df5-967f-c535313cfa24 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3981852K/4129288K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 147436K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [ 0.000000] NR_IRQS:8448 nr_irqs:440 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1097.469 MHz processor
    [ 0.000073] Calibrating delay loop (skipped), value calculated using timer frequency.. 2195.39 BogoMIPS (lpj=3658230)
    [ 0.000078] pid_max: default: 32768 minimum: 301
    [ 0.000089] ACPI: Core revision 20140724
    [ 0.005690] ACPI: All ACPI Tables successfully acquired
    [ 0.008808] Security Framework initialized
    [ 0.008819] Yama: becoming mindful.
    [ 0.009391] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.011193] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.012001] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.012017] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.012360] Initializing cgroup subsys memory
    [ 0.012370] Initializing cgroup subsys devices
    [ 0.012374] Initializing cgroup subsys freezer
    [ 0.012378] Initializing cgroup subsys net_cls
    [ 0.012382] Initializing cgroup subsys blkio
    [ 0.012420] CPU: Physical Processor ID: 0
    [ 0.012422] CPU: Processor Core ID: 0
    [ 0.012432] mce: CPU supports 7 MCE banks
    [ 0.012454] CPU0: Thermal monitoring enabled (TM1)
    [ 0.012472] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    [ 0.012675] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
    [ 0.014781] ftrace: allocating 20674 entries in 81 pages
    [ 0.037109] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.070117] smpboot: CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.070132] TSC deadline timer enabled
    [ 0.070178] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
    [ 0.070223] ... version: 3
    [ 0.070226] ... bit width: 48
    [ 0.070228] ... generic registers: 8
    [ 0.070230] ... value mask: 0000ffffffffffff
    [ 0.070232] ... max period: 0000ffffffffffff
    [ 0.070234] ... fixed-purpose events: 3
    [ 0.070237] ... event mask: 00000007000000ff
    [ 0.090307] x86: Booting SMP configuration:
    [ 0.090312] .... node #0, CPUs: #1
    [ 0.103535] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.103559] x86: Booted up 1 node, 2 CPUs
    [ 0.103563] smpboot: Total of 2 processors activated (4391.78 BogoMIPS)
    [ 0.105926] devtmpfs: initialized
    [ 0.112736] pinctrl core: initialized pinctrl subsystem
    [ 0.112812] RTC time: 0:25:43, date: 10/27/14
    [ 0.112986] NET: Registered protocol family 16
    [ 0.113224] cpuidle: using governor ladder
    [ 0.113230] cpuidle: using governor menu
    [ 0.113291] ACPI: bus type PCI registered
    [ 0.113295] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.113438] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.113443] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.113650] PCI: Using configuration type 1 for base access
    [ 0.124189] ACPI: Added _OSI(Module Device)
    [ 0.124193] ACPI: Added _OSI(Processor Device)
    [ 0.124196] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.124199] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.130313] ACPI: Interpreter enabled
    [ 0.130327] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    [ 0.130336] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    [ 0.130364] ACPI: (supports S0 S3 S4 S5)
    [ 0.130367] ACPI: Using IOAPIC for interrupt routing
    [ 0.130407] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.136949] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.136960] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.137053] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.137240] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
    [ 0.137249] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.137502] PCI host bridge to bus 0000:00
    [ 0.137507] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.137512] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.137515] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.137519] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.137523] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.137526] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.137529] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.137533] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.137536] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.137540] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.137543] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.137547] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.137550] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.137553] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.137557] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.137560] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    [ 0.137564] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff]
    [ 0.137567] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 0.137583] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    [ 0.137752] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
    [ 0.137774] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
    [ 0.137786] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.137796] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
    [ 0.138004] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.138046] pci 0000:00:16.0: reg 0x10: [mem 0xe0706100-0xe070610f 64bit]
    [ 0.138188] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.138353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.138392] pci 0000:00:1a.0: reg 0x10: [mem 0xe0705800-0xe0705bff]
    [ 0.138555] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.138624] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.138714] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.138746] pci 0000:00:1b.0: reg 0x10: [mem 0xe0700000-0xe0703fff 64bit]
    [ 0.138900] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.138967] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.139051] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
    [ 0.139207] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.139354] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
    [ 0.139506] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.139671] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.139708] pci 0000:00:1d.0: reg 0x10: [mem 0xe0705c00-0xe0705fff]
    [ 0.139869] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.139938] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.140021] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
    [ 0.140331] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.140373] pci 0000:00:1f.2: reg 0x10: [io 0x1060-0x1067]
    [ 0.140391] pci 0000:00:1f.2: reg 0x14: [io 0x1070-0x1073]
    [ 0.140409] pci 0000:00:1f.2: reg 0x18: [io 0x1068-0x106f]
    [ 0.140427] pci 0000:00:1f.2: reg 0x1c: [io 0x1074-0x1077]
    [ 0.140444] pci 0000:00:1f.2: reg 0x20: [io 0x1040-0x105f]
    [ 0.140461] pci 0000:00:1f.2: reg 0x24: [mem 0xe0705000-0xe07057ff]
    [ 0.140568] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.140707] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.140738] pci 0000:00:1f.3: reg 0x10: [mem 0xe0706000-0xe07060ff 64bit]
    [ 0.140781] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
    [ 0.140941] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.140981] pci 0000:00:1f.6: reg 0x10: [mem 0xe0704000-0xe0704fff 64bit]
    [ 0.141361] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
    [ 0.141432] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit]
    [ 0.141586] pci 0000:01:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref]
    [ 0.141772] pci 0000:01:00.0: supports D1 D2
    [ 0.141776] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.146966] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.146982] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
    [ 0.147186] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000
    [ 0.147261] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit pref]
    [ 0.147314] pci 0000:02:00.0: reg 0x18: [mem 0xe0510000-0xe051ffff 64bit pref]
    [ 0.147412] pci 0000:02:00.0: reg 0x30: [mem 0xe0600000-0xe06007ff pref]
    [ 0.147646] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.147839] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
    [ 0.147913] pci 0000:02:00.1: reg 0x10: [mem 0xe0520000-0xe052ffff 64bit pref]
    [ 0.148270] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
    [ 0.153657] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.153672] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
    [ 0.153686] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
    [ 0.153903] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
    [ 0.153995] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
    [ 0.154081] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
    [ 0.154165] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
    [ 0.154248] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
    [ 0.154330] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.154413] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.154495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.155375] ACPI: Enabled 1 GPEs in block 00 to 3F
    [ 0.155452] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.155654] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 0.155658] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.155664] vgaarb: loaded
    [ 0.155666] vgaarb: bridge control possible 0000:00:02.0
    [ 0.155751] PCI: Using ACPI for IRQ routing
    [ 0.159478] PCI: pci_cache_line_size set to 64 bytes
    [ 0.159577] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    [ 0.159581] e820: reserve RAM buffer [mem 0xacee4000-0xafffffff]
    [ 0.159584] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
    [ 0.159796] NetLabel: Initializing
    [ 0.159799] NetLabel: domain hash size = 128
    [ 0.159801] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.159829] NetLabel: unlabeled traffic allowed by default
    [ 0.159874] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.159885] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.161931] Switched to clocksource hpet
    [ 0.171668] pnp: PnP ACPI init
    [ 0.171847] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.171852] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.171857] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.171861] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.171865] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.171869] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.171873] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.171877] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.171881] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.171885] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
    [ 0.171891] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.172584] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.172590] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.172671] system 00:02: [io 0x0500-0x057f] could not be reserved
    [ 0.172676] system 00:02: [io 0x0480-0x04bf] has been reserved
    [ 0.172681] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.172727] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.172802] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.172844] pnp: PnP ACPI: found 5 devices
    [ 0.181140] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.181153] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
    [ 0.181169] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.181179] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
    [ 0.181187] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
    [ 0.181201] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.181205] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.181209] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.181212] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.181216] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.181219] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.181223] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
    [ 0.181226] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
    [ 0.181230] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
    [ 0.181233] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
    [ 0.181237] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
    [ 0.181240] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
    [ 0.181243] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
    [ 0.181247] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
    [ 0.181250] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
    [ 0.181254] pci_bus 0000:00: resource 19 [mem 0xafa00000-0xfebfffff]
    [ 0.181257] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
    [ 0.181262] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
    [ 0.181266] pci_bus 0000:02: resource 1 [mem 0xe0600000-0xe06fffff]
    [ 0.181269] pci_bus 0000:02: resource 2 [mem 0xe0500000-0xe05fffff 64bit pref]
    [ 0.181319] NET: Registered protocol family 2
    [ 0.181671] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.181835] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.181980] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.182017] TCP: reno registered
    [ 0.182031] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.182066] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.182162] NET: Registered protocol family 1
    [ 0.182192] pci 0000:00:02.0: Video device with shadowed ROM
    [ 0.182773] PCI: CLS 64 bytes, default 64
    [ 0.182860] Unpacking initramfs...
    [ 0.302677] Freeing initrd memory: 3232K (ffff8800379a0000 - ffff880037cc8000)
    [ 0.302693] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.302698] software IO TLB [mem 0xa8ee4000-0xacee4000] (64MB) mapped at [ffff8800a8ee4000-ffff8800acee3fff]
    [ 0.302960] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.303038] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
    [ 0.303051] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
    [ 0.303148] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.303201] Scanning for low memory corruption every 60 seconds
    [ 0.303637] futex hash table entries: 512 (order: 3, 32768 bytes)
    [ 0.303657] Initialise system trusted keyring
    [ 0.304287] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.307213] zpool: loaded
    [ 0.307219] zbud: loaded
    [ 0.307572] VFS: Disk quotas dquot_6.5.2
    [ 0.307644] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.307867] msgmni has been set to 7783
    [ 0.307975] Key type big_key registered
    [ 0.308262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.308317] io scheduler noop registered
    [ 0.308322] io scheduler deadline registered
    [ 0.308380] io scheduler cfq registered (default)
    [ 0.308697] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
    [ 0.308978] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
    [ 0.309161] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.309165] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 0.309172] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.309208] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.309212] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.309215] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
    [ 0.309223] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.309253] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.309285] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.309344] vesafb: mode is 1366x768x32, linelength=5504, pages=0
    [ 0.309346] vesafb: scrolling: redraw
    [ 0.309350] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.309380] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004780000, using 4160k, total 4160k
    [ 0.315773] Console: switching to colour frame buffer device 170x48
    [ 0.321847] fb0: VESA VGA frame buffer device
    [ 0.321882] intel_idle: MWAIT substates: 0x21120
    [ 0.321884] intel_idle: v0.4 model 0x2A
    [ 0.321887] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.322122] GHES: HEST is not enabled!
    [ 0.322261] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.323099] Linux agpgart interface v0.103
    [ 0.323175] rtc_cmos 00:03: RTC can wake from S4
    [ 0.323405] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.323444] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.323464] Intel P-state driver initializing.
    [ 0.323700] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.323974] TCP: cubic registered
    [ 0.324249] NET: Registered protocol family 10
    [ 0.324810] NET: Registered protocol family 17
    [ 0.325630] Loading compiled-in X.509 certificates
    [ 0.325667] registered taskstats version 1
    [ 0.326469] Magic number: 2:425:406
    [ 0.326624] rtc_cmos 00:03: setting system clock to 2014-10-27 00:25:43 UTC (1414369543)
    [ 0.326771] PM: Hibernation image not present or could not be loaded.
    [ 0.328979] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
    [ 0.328984] Write protecting the kernel read-only data: 8192k
    [ 0.334234] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
    [ 0.336362] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
    [ 0.352574] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.355532] systemd-udevd[47]: starting version 216
    [ 0.387858] ACPI: bus type USB registered
    [ 0.387913] usbcore: registered new interface driver usbfs
    [ 0.387936] usbcore: registered new interface driver hub
    [ 0.388039] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.388042] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.391270] usbcore: registered new device driver usb
    [ 0.392129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.392223] sdhci: Secure Digital Host Controller Interface driver
    [ 0.392228] sdhci: Copyright(c) Pierre Ossman
    [ 0.392414] ehci-pci: EHCI PCI platform driver
    [ 0.392656] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.392671] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.392674] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
    [ 0.392714] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.393158] sdhci-pci 0000:02:00.1: No vmmc regulator found
    [ 0.393163] sdhci-pci 0000:02:00.1: No vqmmc regulator found
    [ 0.395522] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
    [ 0.397372] SCSI subsystem initialized
    [ 0.400613] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.400649] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0705800
    [ 0.402598] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.402906] libata version 3.00 loaded.
    [ 0.408631] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.408994] hub 1-0:1.0: USB hub found
    [ 0.409010] hub 1-0:1.0: 3 ports detected
    [ 0.409474] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.409486] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.409509] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.413433] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.413449] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0705c00
    [ 0.421967] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.422311] hub 2-0:1.0: USB hub found
    [ 0.422325] hub 2-0:1.0: 3 ports detected
    [ 0.422611] ahci 0000:00:1f.2: version 3.0
    [ 0.422819] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
    [ 0.422858] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.422890] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
    [ 0.422896] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
    [ 0.425306] scsi host0: ahci
    [ 0.427777] scsi host1: ahci
    [ 0.430423] scsi host2: ahci
    [ 0.431139] scsi host3: ahci
    [ 0.431256] ata1: SATA max UDMA/133 abar m2048@0xe0705000 port 0xe0705100 irq 26
    [ 0.431260] ata2: DUMMY
    [ 0.431262] ata3: DUMMY
    [ 0.431265] ata4: DUMMY
    [ 0.475720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.715469] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.748738] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.760911] ata1.00: ATA-8: MKNSSDCR120GB-7, 582ABBF0, max UDMA/133
    [ 0.760921] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 0.770881] ata1.00: configured for UDMA/133
    [ 0.771363] scsi 0:0:0:0: Direct-Access ATA MKNSSDCR120GB-7 BBF0 PQ: 0 ANSI: 5
    [ 0.782066] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 0.782627] sd 0:0:0:0: [sda] Write Protect is off
    [ 0.782637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.782810] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 0.785152] sda: sda1 sda2 sda3
    [ 0.786014] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 0.839907] hub 1-1:1.0: USB hub found
    [ 0.840119] hub 1-1:1.0: 4 ports detected
    [ 0.935913] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 0.945475] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.069643] hub 2-1:1.0: USB hub found
    [ 1.069827] hub 2-1:1.0: 4 ports detected
    [ 1.148949] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
    [ 1.233928] usb 1-1.1: string descriptor 0 read error: -22
    [ 1.290134] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 1.305272] tsc: Refined TSC clocksource calibration: 1097.506 MHz
    [ 1.315437] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
    [ 1.344309] systemd-udevd[136]: starting version 216
    [ 1.352295] systemd-journald[119]: Received request to flush runtime journal from PID 1
    [ 1.607498] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.610413] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
    [ 1.610471] ACPI: Lid Switch [LID0]
    [ 1.610565] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 1.610572] ACPI: Power Button [PWRB]
    [ 1.610653] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
    [ 1.610657] ACPI: Sleep Button [TPAD]
    [ 1.610758] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 1.610763] ACPI: Power Button [PWRF]
    [ 1.626490] mei_me 0000:00:16.0: irq 27 for MSI/MSI-X
    [ 1.645724] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 1.645942] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
    [ 1.653739] thermal LNXTHERM:00: registered as thermal_zone0
    [ 1.653745] ACPI: Thermal Zone [THRM] (0 C)
    [ 1.660772] [Firmware Bug]: battery: (dis)charge rate invalid.
    [ 1.665282] ACPI: Battery Slot [BATX] (battery present)
    [ 1.666038] ACPI: AC Adapter [AC] (on-line)
    [ 1.681337] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20140724/utaddress-258)
    [ 1.681351] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681358] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
    [ 1.681364] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681367] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
    [ 1.681374] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681376] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
    [ 1.681382] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681385] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 1.688249] [drm] Initialized drm 1.1.0 20060810
    [ 1.691201] pps_core: LinuxPPS API ver. 1 registered
    [ 1.691207] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 1.700706] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 1.701200] PTP clock support registered
    [ 1.706524] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 1.752871] tg3.c:v3.137 (May 11, 2014)
    [ 1.753314] Adding 8167872k swap on /dev/sda2. Priority:-1 extents:1 across:8167872k SSFS
    [ 1.757127] Bluetooth: Core ver 2.19
    [ 1.757151] NET: Registered protocol family 31
    [ 1.757154] Bluetooth: HCI device and connection manager initialized
    [ 1.757166] Bluetooth: HCI socket layer initialized
    [ 1.757170] Bluetooth: L2CAP socket layer initialized
    [ 1.757180] Bluetooth: SCO socket layer initialized
    [ 1.771585] usbcore: registered new interface driver btusb
    [ 1.771864] snd_hda_intel 0000:00:1b.0: irq 28 for MSI/MSI-X
    [ 1.777240] cfg80211: Calling CRDA to update world regulatory domain
    [ 1.812626] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 1.812635] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.812640] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 1.812643] sound hdaudioC0D0: mono: mono_out=0x0
    [ 1.812646] sound hdaudioC0D0: inputs:
    [ 1.812650] sound hdaudioC0D0: Internal Mic=0x1b
    [ 1.812654] sound hdaudioC0D0: Mic=0x19
    [ 1.819178] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 20:89:84:c7:a0:92
    [ 1.819187] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
    [ 1.819192] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    [ 1.819196] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
    [ 1.834640] media: Linux media interface: v0.10
    [ 1.845475] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input7
    [ 1.849543] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 1.850477] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 1.850623] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 1.851058] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 1.851353] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 1.860140] iTCO_vendor_support: vendor-support=0
    [ 1.861704] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.861764] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
    [ 1.862721] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.863690] Linux video capture interface: v2.00
    [ 1.875723] usbcore: registered new interface driver ath3k
    [ 1.914247] tg3 0000:02:00.0 enp2s0f0: renamed from eth0
    [ 1.926001] systemd-udevd[145]: renamed network interface eth0 to enp2s0f0
    [ 1.938186] usb 1-1.1: USB disconnect, device number 3
    [ 1.944872] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b336)
    [ 1.953353] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
    [ 1.953679] usbcore: registered new interface driver uvcvideo
    [ 1.953684] USB Video Class driver (1.1.1)
    [ 1.997073] intel_rapl: Found RAPL domain package
    [ 1.997080] intel_rapl: Found RAPL domain core
    [ 1.997083] intel_rapl: Found RAPL domain uncore
    [ 1.999325] [drm] Memory usable by graphics device = 2048M
    [ 1.999330] [drm] Replacing VGA console driver
    [ 1.999337] checking generic (d0000000 410000) vs hw (d0000000 10000000)
    [ 1.999340] fb: switching to inteldrmfb from VESA VGA
    [ 1.999399] Console: switching to colour dummy device 80x25
    [ 2.006114] i915 0000:00:02.0: irq 29 for MSI/MSI-X
    [ 2.006130] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 2.006133] [drm] Driver supports precise vblank timestamp query.
    [ 2.006275] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 2.010165] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:1f.3/i2c-0/0-0067/input/input14
    [ 2.014824] mousedev: PS/2 mouse device common for all mice
    [ 2.037823] ath: phy0: ASPM enabled: 0x43
    [ 2.037831] ath: EEPROM regdomain: 0x6c
    [ 2.037834] ath: EEPROM indicates we should expect a direct regpair map
    [ 2.037838] ath: Country alpha2 being used: 00
    [ 2.037840] ath: Regpair used: 0x6c
    [ 2.044014] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 2.044617] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90004980000, irq=17
    [ 2.050867] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0
    [ 2.054438] fbcon: inteldrmfb (fb0) is primary device
    [ 2.054543] Console: switching to colour frame buffer device 170x48
    [ 2.054559] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 2.054563] i915 0000:00:02.0: registered panic notifier
    [ 2.066878] systemd-udevd[145]: renamed network interface wlan0 to wlp1s0
    [ 2.070905] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
    [ 2.125455] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
    [ 2.154830] tg3 0000:02:00.0: irq 30 for MSI/MSI-X
    [ 2.154842] tg3 0000:02:00.0: irq 31 for MSI/MSI-X
    [ 2.154849] tg3 0000:02:00.0: irq 32 for MSI/MSI-X
    [ 2.714571] Switched to clocksource tsc
    [ 2.714588] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
    [ 2.731648] usb 1-1.1: string descriptor 0 read error: -22
    [ 2.850571] random: nonblocking pool is initialized
    lsusb
    Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 004: ID 04f2:b336 Chicony Electronics Co., Ltd
    Bus 001 Device 005: ID 0489:e04e Foxconn / Hon Hai
    Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  • USB Ports not working with specific devices

    So this one has me scratching my head. My USB ports on the back of my iMac are working except for a few devices. 1 being a logitech USB receiver, and 1 being a usb mp3 player. When I plug the received into the iMac the keyboard won't work, but when I plug my USB hub into the same USB port and the receiver into the hub it works fine. The mp3 player isn't working in any usb/hub (so that's a mook point).
    Here's what I've tried to resolve this issue:
    1. Reset iMac
    2. Reset PRAM
    3. Try every usb port on the back of the iMac
    None of these have fixed my issue. Plugging it into the hub isn't a huge deal, but I'd like the option to use my USB ports as I wish without having to deal with this. Anyone have advice on a solution?

    It is not a matter of using your USB ports as you wish, it is a matter of what you are plugging into them and the power demands that what you plug into them makes on the system.
    Not all USB ports or devices are created equal. How many ports are you using? What exactly are you plugging into the ports? What is the power demand of each item that you are plugging into each port? Are any of the USB devices self powered from their own separate power supply? Are all of the devices dependent upon the iMac for power?
    It sounds to me that you have too many high power devices demanding more power through the ports than the iMac can accommodate. Is the USB hub self powered? If so, that is probably why it resolves your issue with the Logitech Unified receiver. There is very little info on this device on the Logitech website, so I could not ascertain its power demands.
    Dah•veed

  • Need a USB hub to work with a multifunction printer

    Can anyone recommend a reliable USB hub that can work with the HP Officejet J4580 Multifunction (fax) Printer? I bought a Belkin 7-port hub for my G4 FW800 laptop (OS 10.3.9) and it works with an older dedicated printer and a 2-year-old multifunction printer (no fax), but I just got a new Belkin 7-port to go with the same laptop and it won't work with the new multifunction, so I'll have to return it.
    Any suggestions for a 2+ port hub that's reliable and would work with this new printer? AC- or laptop powered doesn't matter, though I'd prefer to have the AC option. Amazon's web page on this says it will work with all 1.0 and 2.0 USB devices, but obviously that's wrong, and I like not to make the same mistake twice. Thanks!

    I'd have to agree with motsteve too.
    Stay away from unpowered hubs, they are nothing but trouble or should I be more diplomatic and say that they do work for some devices but not all and some unexplained behaviour has been known to happen with them.
    The same can be said of bus-powered hard drives.
    Are you sure it is not a driver problem ?
    Are you sure this MFP is compatible with the OS you are using ? Have you checked the system requirements first ?
    I think the USB hub you have is probably fine.
    If it is USB2.0 compliant and is mains powered then there is something else at work here.
    1) Check the cables - try another if you have one.
    2) Unplug the printer , turn the computer and hub off.
    3) Reconnect everything and then turn on first the printer , then the hub , lastly the computer.
    4) If 3) fails ,do the same again but in a different order.
    I have had problems with peripherals not showing on the desktop or getting a " Can't connect to device XXXX " so I have turned everything off, unplugged them all, then reconnected and turned everything back on.
    Once that peripheral is mounted once I generally find that I don't have a problem with it again.
    I think it may lie in the order that the OS extensions load or something along those lines.
    Stewie
    Message was edited by: stewiesno1

  • Usb mike not working with mac mini

    Hi,
    I bought a samson CO1U usb connection mike to use with the mac mini as there is no mike connection. The device is recognised by the computer but apparently not by i-movies or Quicktime Pro 7 as when I bring up the audio screen nothing registers in the sound level and obviously nothing records - am I doing something wrong or missing something out or is this device just not compatible? Apple help were no help!
    Hope someone can be of assistance in this matter as I need to record a voiceover on to an animation video.
    cheers, shadwell

    Hi, thanks for your reply - did that but still no joy.
    In utilities / audio midi it says output ( and input ) not supported and in system preferences/sound the input level is registering nothing.I'm going to try the mike on a friend's laptop to see if it is a problem with the mike or the mini mac - or maybe I'm just making some simple mistake in setting it up in Quicktime.Do you know if any usb recording devices actually do work with the mini mac?
    thanks, shadwell

  • I need to find a powered usb hub that works with my Macbook pro

    I've got a macbook pro mid 2010. And 2 usb ports isn't enough. Even with the powered hubs taht I have tried none will seem to charge my ipad 2. It only works if it is plugged directly in to the Macbook. So is there a powered usb hub out there that can handle having an ipod and and ipad plugged into them and actually charge these devices. Thanks in advance.

    Yes. Google...

  • USB Hubs not working

    Hi
    I've been trying to connect a usb hub to my iMac and have tried all types of brands (Belkins, unknowns) and none of them seems to work. There's either no connection at all, or it works for a day or two then it starts to disconnect intermittently. I'm at wits end. Any advice appreciated. I'm just trying to connect a printer, iPod and mini-usb cables to the hub to sync my devices. Thanks.

    I agree with the other poster that you need a powered USB hub. I've been using one from Cable to Go for about 6 months now and it works great, have never had an issue with it. [Click Here.|http://www.amazon.com/Cables-Go-Port-USB-2-0/dp/B000IZDN60/ref=pdbbs_sr2?ie=UTF8&s=electronics&qid=1219431869&sr=8-2] There are various others available I just like this one because it's small and sleek.
    --Brian

Maybe you are looking for

  • Msi kt3 ultra, msi gf4 4200 tvout problem

    I have a msi gf4 4200 64mb card and i have a msi kt3 ultra aru and windows xp, my problem is tv out is garbled in pal , ntsc is grey (iam in europe), the colours seem inverted blues are red, etc and theres a ghosting effect around moving images like

  • How do i restore recoverd files from a crashed hard drive into Itunes?

    I just revoved 20 gig of songs from a defective hard drive. How do i get them into a newly installed version of itunes? DO I have to reimport them all and lose the tags I added?

  • 651 Tv out

    Hi  Ok the 651 dosnt have tv out on board i think this output would come from the MSI tv card.  So what does the Pal ntsc setting ect do in this case nothing i guess since im using a All in wonder. Ferret

  • Hard drive crashed, best course of action?

    I have a 2011 MacBook Pro. I have not had problems with it before this, but last night I opened it to work on something and it was frozen with safari open as is left it. I had a cursor and it's wasn't showing the spinning wheel but nothing was respon

  • Anyone use an MP3 player besides an Apple?

    Aloha, I am thinking of buying a Sandisk Sansa Fuze or Clip+. I love my iMac but want to try a new MP3 player with better sound quality. Please share your experiences. Mahalo! :]]]