USB Hub will no longer charge my iphone since update to 4.2.1
Hi,
I have recently updated my iphone 4 to 4.2.1 and ever since then I can no longer charge it using a USB hub which has been working fine for about 6 months... the hud still works with all other gadgets I have plugged into it, I have also tried moving the cable into other ports with no luck.
apple recommends that you do not use a usb hub with ios devices they always have sorry
Similar Messages
-
Itunes no longer recognizes my iphone since updating
Itunes no longer recognizes my iphone since updating. Can you help me, please ?
Hy there,
In order for you to solve this problem you have to follow these stept if your running windows:
1'st step is to go into the device manager
2 step is to go to portable devices (it is rught under network adapters)
3 step is to right clic apple iphone and click update drivers
4 step is to brows your drivers from C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
After that your itunes will pump up alown and youl see your iphone right there.
Good luck and sry for my bad righting.
Andrei -
From today both my iPad and iPhone will no longer charge
It's the weirdest thing. My Iphone & Ipad will no longer charge. They both worked/ charged fine yesterday.
I have tried various other chargers for my iPhone as we have other Apple equipment at our house & they all charge fine.
The lightning bolt is not appearing when charging & nor do either of them beep when charging. My iPad is not even 6mths old!
And isnt it weird that its both? Is that a hardware or iCloud problem
Please can someone help.First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
Do same for iPhone. -
Iphone 5 will no longer charge after 7.1.2 update
I updated my Iphone 5 to the latest software 7.1.2 a couple days ago and now it will no longer charge. I purchased a new cable thinking that was the case but it is still not taking a charge from my car, wall outlet, or computer.
Apple Support told me it is the port, a $279 fix without warrenty or Apple Care. I have done nothing to the phone to cause this to stop working. Now my phone is dead with no forseen reason other than the update causing something to go wrong.
There must be some sort of issue as this is not the first post I've seen ragarding this. I would appreciate not having to fork over a massive sum of money due to what I thought was a routine software update.
ThanksI find it extremely hard to believe that a software update has caused your port to bad. This sounds more like port just gave up at the same time as the update.
Allan -
my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?
It seems to me that the connection port is faulty.
GeorgeLooks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
My iPod Touch will no longer charge from a wall socket, only my computer. HELP!
My 4th generation iPod Touch will no longer charge from a wall socket, only my computer. I tried buying a new cable and USB charging socket (and I bought one made by Apple), but that did not fix the problem. I restored it from iTunes, hoping that would work as well, but that failed. I am at my wit's end. Can anybody here help me? I've bought new equipment, tried rebooting, restoring, etc. but nothing so far has proven successful. If anyone's got a solution, please help!
Thanks!
Signed, a very frustrated iPod user in Ohio!
<Edited By Host>All I can suggest is the standared fixes. It seems very strange
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Bring the cable and Apple wall charger too.
Apple Retail Store - Genius Bar -
Ipod will no longer charge on docking station or car dock
My ipod will no longer charge while it is playing on my docking station or on the car dock. The only way I can charge now is with the genuine charger which means I can only listen for a couple of hours and then have to charge up again. Any ideas?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My 4thgen iTouch will no longer charge...
My iTouch will no longer charge, at first I thought it was my charging dock on the alarm clock but it will not charge and is not recognized on the computer either. My pc says "the hardware plugged in has malfunctioned and is not recognized". Can I do anything or is this dead? I have only had it since November.
Any help would be GREATLY appreciated!
Thanks
KristieYou can try a couple of things before you throw in the towel and take/send your touch in for service.
First off, restart it - hold the Sleep/Wake button down until you see the red slider. Turn it off. To restart, hold down the Sleep/Wake button.
Reset - hold the Sleep/Wake and Home buttons down at the same time. After about 10 seconds you will see the Apple logo - let go of the buttons.
Also, make sure you are using the original USB cable when you plug your touch in to recharge.
If the Restart/Reset doesn't work and you are close to an Apple store, make an appointment with a Genius and take it in. If you need to send it in, see the instructions on this site on how to obtain warranty service. -
USB Hub(s) no longer working after 10.8.5 update
Installed the 10.8.5 update via software update on my iMac 3.4Ghz i7 (no DVD drive) and had the Bluetooth unavailable issue I have seen mentioned elsewhere. Managed to restore Bluetooth via a restartwith all USB devices disconnected. However I have two USB hubs that no longer work. One is a colourful freebie so maybe not a surprise but the other is a powered D link USB 2.0 DUB-H7 which worked fine before the update. Now no device that is connected to it is recognized no matter which USB port the hub is plugged in to. Leaves me somewhat short of USB ports.
I've been struggling with this for 2 days, since I upgraded to 10.8.5 which I needed to go to get the latest iTunes, which I needed to upgrade my iPhone and iPad to IOS7 . . . yes, right down the garden path I walked
MacBook Pro 17", early 2009.
After the 10.8.5 upgrade Bluetooth is Not Available, same as seanluck13.
-System Preferences: no sign of Bluetooth
-System Search: no sign of Bluetooth
-System Profile Information: Bluetooth: No Information Found
-So Bluetooth is absent, removed, not present -- AGHHHHH!!!!!
Apple BT keyboard and trackpad can't be used. MacBook trackpad is worn out and I get wrist strain trying to activate it!
I read on a forum that a fix was to reinstall the system over the internet after a CMD-OPT-R restart. Did that -- 5 HOURS LATER -- NO CHANGE, BLUETOOTH STILL ABSENT !@(%&( )TY(@Q#*!!
Please someone help me before I throw this Mac down the garbage shoot. At the moment that's only a fantasy. -
My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?
I'd start by looking in system profiler.
the blue Apple icon > About this Mac > More info...
goto the hardware section. Scroll down and click on USB
See what happens when you have the device plugged in & not plugged in.
Move keyboard & mouse around to verify that ports work. Plug device in a port that worked with keyboar or mouse. Keyboard usb ports are rather low power.
Perhaps device is taking too much power. Are devices power or unpowered? Try connecting devices to a usb hub.
Which mac do you have?
What iMac do you have?
Report system info
Blue apple > about this Mac
click on more info
click on hardware
do not copy your serial number -
My ipod nano will no longer sync with itunes since i purchased an iphone 4s and synced the phone with itunes. When I plug my ipod into my imac, it does not even read or recognize my ipod. What do i do?
Are you using the original cable that came with Nano and not your iPhone's cable? Have you worked through the troubleshooting in this Apple support document?
http://support.apple.com/kb/TS1410
B-rock -
i have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated
i have also tried 4 different chargers both official apple and non officiali have tried this but still not working i found a way of fixing it by restoring the phone but this has now put my phone in recovery mode and when i try to fix it i get an error 14 which i have no clue what it means
-
Satellite A205: Bluetooth USB dongle will no longer connect to AirCable
I plugged a generic Bluetooth USB dongle into my Satellite A205 and used it for several hours over three days to connect to an AirCable Serial Bluetooth to run my telescope controller. The generic dongle worked after downloading a Toshiba stack.
Each time I restarted the Bluetooth it incremented the COM port numbers.
My telescope controller will not recognize COMs above 20 so I deleted COMs that really were not used.
The Bluetooth USB dongle will no longer connect to the AirCable Serial Bluetooth. *It worked before and will not work today.*
I've tried three different Bluetooth USB dongles including TrendNet, AirCable and the generic.
I cannot connect to the telescope controller's AirCable Serial Bluetooth with any of the dongles.
_*Can anyone suggest a Bluetooth monitor that will work, or suggest a way to get my A205 to work with one of my Bluetooth USB dongles?*_
DonI have Vista. I did not download SP1. It did not appear in the Update Manager. My laptop is about 3 months old so I did not want to download the 400+ MB SP1 to a fairly new version of Vista Home Premium.
Here are steps that did work for me. This process is tedious but it worked three times in a row with no failures after scores of failed connection attempts.
*_Getting Bluetooth to Work With Vista and Generic Bluetooth Dongle_*
1. Power up Bluetooth serial (AirCable).
2. Start laptop with Vista Home Premium and wait 2 minutes.
3. Plug in the generic Bluetooth dongle.
4. Click tray Bluetooth icon to show Bluetooth devices.
5. Select and remove the existing device.
6. Unplug and plug in the generic Bluetooth dongle. My Bluetooth COM Port is 6-Outgoing Serial, and 7-Incoming
7. Add a new connection for the Bluetooth serial.
8. Start; Control Panel; Device Manager
9. If COM ports with a higher number than your selected ports (mine are COM 6 and COM 7) exist, do the following:
- Right-click the port number that is the Output port (Click the Bluetooth icon in the tray to determine which COM number is output and which is input).
- Let's say for my example that Device Manager Ports shows COM 11 and COM 12, and that COM 11 is output.
- Right-click COM 11 and select Properties
- Click the Port Settings tab and the Advanced button
- Click the Com Port number dropdown list and reassign it to COM 6 (the desired Outgoing COM port).
- Click OK a couple of times.
- Now, right-click COM 12 (input), Properties, Port Settings tab, and Advanced button.
- Reassign COM 12 to COM 10 (OK...), reassign to COM 9 (OK...), reassign to COM 8 (OK...), reassign to COM 7 (OK...). (You are clearing out unused COM ports 10, 9, and 8.)
- Click OK a couple of times.
- Click the tray Bluetooth icon and remove the existing device.
- Pull the Bluetooth USB dongle out of the computer and reinsert it.
- Click the tray Bluetooth icon, search for and add your Bluetooth serial device.
At this point your remote Bluetooth device should have a good connection.
+++++++++++++
Thank you everyone for your input. It is too bad that it is so difficult to use a Bluetooth dongle with Vista but such is life.
Don -
my daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck, home+power for 10-15 seconds. I really would like to not lose everything she has, again, because I can't back it up this time. I have tried charging via a wall outlet and PC and both charge fine, just only to 20%. I am using the cable that came with it so no aftermarket issues there. Please help so I don't have to reset everything again.
Because once it has charged enough to be powered on as soon as you turn it on it says battery is at 20% and will not charge anymore after that, it just runs for about 5-10 minutes before the battery dies again. The battery cycles discharge/recharge daily and its not on the charger at full charge for more than a couple hours and is never totally dead for more than a couple of hours.
-
my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?
What model is your TC? What is the firmware?
I recommend you do a factory reset and use short names.. not apple recommended names.
Short.. 2-20 characters .. less than 10 even better.
No spaces.
Pure alphanumeric.
Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.
Maybe you are looking for
-
Display three Values in Pie charts
Hi All, I want to display three Values in Pie Chart(%, Value and one more field). Please suggest me any solution for this. For Eg Pie chart should display value lie this :- Nokia, 25,025, 38.52% (It consists of three differet values) Thanks,
-
After updating to Maverick, my itunes is out of whack.
I updated my MacBook Pro to Maverick. Now some albums in iTunes are messed up. Several songs are showing as stand alone instead of being in their albums. I can't figure out how to put them back into their album....any ideas? Dragging them doesn't wor
-
Centro fading speaker output level
I've had my AT&T Centro for about 6 weeks and I'm having a weird problem with the output sound level for all notifications (Ring Tones, Phone Alerts, Calendar, Messaging, and System). When I got the Centro the output sound level was solid and loud.
-
Hi Last weekend my Synaptics trackpad started to behave odd, during boot up the mouse pointer is in the centre of the screen, then as the computer loads up it starts to move all over the screen by itself.. If I try to move it using the trackpad it wi
-
Triggering a custom action in a tab bar controller
Hey guy, As you know, normally, when you click an item in a tab bar it is going to load a view right? But I was wondering if there is a way to trigger a custom action when you click an item in a tab bar controller instead of loading a view. If there