USB in a new car

I just bought a Honda Crosstour, which is one of the new cars that have a USB jack that can read and play music off of my iphone.
I'm looking for a good holder/cradle solution so I can just slide my iphone in and out of it when I get in or out of the car. I'm worried about excessive connecting/disconnecting of the regular sync cable and wear and tear on the connectors on the phone.
I had a great griffin tuneflex cradle that was perfect in my old car, but the radio won't read the iphone when I plug the sync cable into the bottom of the griffin.
Any suggestions for products?

Hard to say for sure. However, some stereo systems do require a special cable.  I would check with the car dealer or manufacturer for the best answer.
B-rock

Similar Messages

  • I getting no sound out of the USB connection in my car from my new iPod Classic. Has anyone encountered this problem?

    I getting no sound out of the USB connection in my cars from my new iPod classic. The song name artist display on the console in the car but no audio. This is happening on 2 cars - Nissan Rogue and Acura TL. My older iPod classic played fine in these cars. Has anyone encountered this issue?  

    I have a similar problem with a 160 gb Classic, about 5 years old - if I move the plug one channel may be heard and tehn the other. The interface works but not the sound. Different ipods eg nano work perfectly.
    The two cars I have are an Audi and a BMW and both have manufacturer connectors

  • My new car has a USB port and requires music in MP3 format to play. How can I convert my mountain lion Itunes 11 m4a albums to mp3?

    My new car has a USB port and requires music in MP3 format to play. How can I convert my mountain lion Itunes 11 m4a albums to mp3?

    I found this on another discussion forum it may help
    Niel
    Re: how to save music as mp3 on itunes 
    Nov 24, 2011 11:21 PM (in response to dadywak)
    Click here for information.

  • When using USB input iPod classic won't read in new car

    Just bought a new car with a factory iPod ready stereo system. When using the USB input iPod Classic won't read but son's iPod touch does. Anyway I can fix this? I know my Classic works fine as I was using it in my other car and it works in my wife's car. Is the car just too new therefore making my Classic incompatible and soon to be obsolete?

    the best option is to contact the car manufacturer or look at the manual to make sure it supports your ipod verision. if it is a custom radio then look then contact the manufacturer or look at the manual for same thing. you can try a reset with http://support.apple.com/kb/ht1320.

  • My ipod nano doesn't work in my new car using the usb

    my ipod nano won't play music in my new car using the usb.  It works fine with earphones, and music displays in car but won't play?

    And I have one more question, when I connect my iPod,
    iTunes turns on automatically and the iPod is seen,
    but it's not seen in "My Computer". Is that ok?
    Since you have the iPod set at auto sync the ipod would not show in "My Computer" (someone correct me if I am wrong). If you were able to successfully switch it to manual it would show as it would be in disk mode. So I would say that this is ok.
    I have done a search for the error -50 you keep getting and can't find anything. At this point I would suggest contacting Apple support to see if they can give you some insight on this error. One thing though...have you tried uninstalling iTunes from your computer completely and then re-installing it to make sure it's not an issue with your current copy of iTunes? Also, have you tried to go through the 5 R's?
    http://www.apple.com/support/ipod/five_rs/
    If you have not gone through the 5 R's, please try that first and see if it helps. If not, then try un-installing and then re-installing iTunes. If that does not work, then it would probably be beneficial to call Apple Support.

  • What USB cable for in car use?

    I have just received my brand new car & it has a USB dock to plug your Iphone 4 in to use through the Stereo/Screen but have been told it needs to be a particular USB cable for it to work?
    Can anyone inform me what USB cable i am actually looking for as a standard USB charging one does not work?
    Thanks

    What kind of car? I use a stock Apple in my 10' Acura TL and it charges and connects fine.

  • Got a new car and when I plug in my older shuffle it says to check firmware. How do you update the firmware?

    Got a new car and when i plug in my older shuffle it ask me to check the firmware. What do I need to do?

    It's possible that your new car audio system is not compatible with your older shuffle, or it may not be compatible with shuffles, period.  You should consult the documentation for the car audio system (or its tech support) to check the list of compatible devices.
    There is no firmware upgrade for an old shuffle with will make it work, if the car audio system does not support the device.
    NOTE:  As an alternative, you can buy an inexpensive USB flash drive.  Maybe you already have one.  Load it with your favorite songs.  Here's one that barely sticks out of the USB port
    http://eshop.macsales.com/item/SanDisk/SDCZ33008G/
    with several times the storage capacity of a shuffle.  No dangling cable and more resistant to extreme heat/cold, and you can leave it connected to your car audio system. 

  • How can I create a new Care Plan with one or more care tasks

    Hello,
    I'm working on a Dutch website in the HealthVault Environment. I got difficulties in creating and updating a careplan with care tasks. Most likely it's due to lack of knowledge...
    Following code works fine:
    CarePlan plan = new CarePlan();
    plan.Name = "test";
    this.PersonInfo.SelectedRecord.NewItem(plan);
    It creates a plan called [test]. But I don't know how to create a plan with one or more tasks in it: the tasks property is read only.
    https://msdn.microsoft.com/en-us/library/microsoft.health.itemtypes.careplan.tasks.aspx
    Half a year ago I was able to add an example of a careplan, which was a feature of the dev tools, but for some reason that's not possible anymore.
    https://developer.healthvault.com/DataTypes/Overview?TypeId=415c95e0-0533-4d9c-ac73-91dc5031186c
    So my question is, how can I add a new care plan with a task like the example from the HealthVault dev tools:
    <tasks>
    <task>
    <name>
    <text>Run 100 miles</text>
    </name>
    <description>Run 100 miles in 6 months</description>
    <start-date>
    <structured>
    <date>
    <y>2013</y>
    <m>12</m>
    <d>1</d>
    </date>
    </structured>
    </start-date>
    <end-date>
    <structured>
    <date>
    <y>2014</y>
    <m>6</m>
    <d>1</d>
    </date>
    </structured>
    </end-date>
    <target-completion-date>
    <structured>
    <date>
    <y>2014</y>
    <m>12</m>
    <d>31</d>
    </date>
    </structured>
    </target-completion-date>
    <sequence-number>279128532</sequence-number>
    <recurrence>
    <interval>
    <text>Once</text>
    </interval>
    <times-in-interval>10</times-in-interval>
    </recurrence>
    <reference-id>p01vil21ckg7k2346y1g60337mmi20sg564l321l8pmpqev39n302572sewu76lh9019s3993e02924</reference-id>
    </task>
    </tasks>
    Any help is welcome 
    Wilfred

    Hi Wilfred,
    Have you tried this?
    CarePlan plan = new CarePlan();
    plan.Name = "test";
    plan.Tasks.Add(someTask) 
    If you have a task list already, you would need to enumerate through it and add one by one...
    foreach (var task in existingList)
        plan.Tasks.Add(task)

  • HT1692 How do I get my old contacts that were last synced on my ITunes account through my laptop (USB) to my new iPad ? I no longer have a laptop just my iPad mini.

    How do I get my old contacts that were last synced on my ITunes account through my laptop (USB) to my new iPad ? I no longer have a laptop just my iPad mini.

    So the contacts were synced to the computer you no longer have?  You could use a free app like MCBackup and email the contacts from the ipad to yourself and open the email on your  phone and then import the contacts from the email to the phone

  • When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone.  This previously worked, but has randomly stopped working, help!

    When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone.  This previously worked, but has randomly stopped working. help!

    I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
    Why are you posting in this forum about what occured with an independent service provider?  How is is at all relevant to Apple??  In fact, service by any person or business not authorized by Apple voids any waranty.

  • I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

    I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

    iTunes only syncs to Apple devices.
    Assuming the media is not DRM protected, any of the media can be dragged and dropped from iTunes onto other drives (external, flash, etc) as the user chooses.

  • When I plug my iphone in to my USB port in the car or computer I get an error message which says the USB has exceeded it power limit

    When I plug my iphone in to my USB port in the car or computer I get an error message which says the USB has exceeded it power limit.
    What can I do?

    madonnafromqld wrote:
    When I plug my iphone in to my USB port in the car or computer I get an error message which says the USB has exceeded it power limit.
    What can I do?
    Stop doing that.

  • Bought new car with 30 pin connector but shuffle has only a 3.5mm

    bought new car with 30 pin connector but shuffle has only a 3.5mm. I'm not sure apple has a connector.i need a 30 pin female to a 3.5mm connector to o from car to shuffle.

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Unless you bought the iPad directly from Apple in the last couple of weeks, you likely cannot exchange your 3G for the 4G.

  • New Cars with Line-in in

    For those of us wanting to play our various players in the car, it appears some of the car makers are catching on and making a standard "line-in" input in their new models. I just got something in the mail from Chevrolet about the Impala and all their 2006 models come with an "iPod input", which is just a mini-jack on the front of the stereo. I guess we have to get used to our Zens, etc. being called "iPods" by others, but I am encouraged that the car people are paying attention to this. If Chevy is doing it, then I'm sure it will catch on all over pretty soon. I still have a cassette player in my current car, but they are harder to find in new cars now and I just don't like those FM transmitter things.

    There's a way to get a line-in input in many cars that weren't built with it.
    For many models, you can buy adapters that plug into the back of your car stereo's head unit (the thing in the dashboard), and have a standard headphone jack on the other end to plug into your mp3 player. In my car, the adapter makes the stereo think my MuVo2 is a CD changer.
    It's really easy to use, and the sound quality is just like listening to a CD. The day I installed my adapter, I literally threw out my FM transmitter, which never worked well, even in rural areas with few or no FM stations. I've used the adapter for six months or so with absolutely no problems.
    I don't know the rules about posting Web sites or brand names on this forum, so I won't. But you can do a Web search for auxiliary input adaptor. There are several brands out there. It varies depending on the model car, but prices seem to hover in the $60 to $70 range.

  • My charger is stuck in USB port of my car , how can I get it out without damaging either ?

    The charger that came with my iPhone 5c is now stuck in the USB port of my car. How can I get it out without damaging either?

    Use this article: If you can't update or restore your iOS device - Apple Support
    Best of luck!  And since you didn't back up your data previously, all your data is lost.  Make sure to use the free backup services of iCloud or iTunes.
    iOS: How to back up and restore your content - Support - Apple - http://support.apple.com/kb/HT1766

Maybe you are looking for

  • I cannot send an email from my iphone

    I have entered all of the information for my in-coming and outgoing server into my iphone 4s.  However, I cannot send an email  and the message reads as follows "The sender address XX.net was rejected by the server.

  • Payroll Remuneration Statements - Print Entire History for one employee?

    Has anyone found a way to print an employee's complete historical list of remuneration statments as a group rather than selecting them one at a time and printing them individually? Our payroll manager gets two or three court subpoenas per month to pr

  • Payment Request for APP.

    I want to consider advance payment by using payment request. Please send the detailed config to my mail id: [email protected]

  • Oracle 11g wallet open failed

    Hi All: I have being having issues with oracle wallet on oracle 11g Release 2. I have an application that cannot connect to the database due to the wallet. Wallet is now becoming a nightmare for developers of application connecting to oracle. SQL> st

  • Loading object type data -- solution required ASAP

    Hi I have the following table content (id number primary key, content contenttype) where contenttyoe is (doc blob, mimetype varchar2(100)) In order to load Bulk data I use ths following script but it keeps giving errors Please can anyone help LOAD DA