USB Intellimouse explorer 4 wont work !
Hi Guys, This is my last option. Have googled and everything, still cannot find the answer to this problem.
Right basically I have built a new machine around an AMD 64 3000+ MSI Neo Plat Mobo etc etc.
Basically I can only use a ps/2 mouse that i set the computer up with !
I wanted to use a microsoft intellimouse exploror 3 which ive had for about 2 years now and worked flawlessly with my laptop. How ever when I plu it into the usb port on the pc nothing happens.
So I went out and bough the newer version 4 of the mouse. Connected it, mouse lights up, but just doesnt work. Cursor doesnt move and its not listed in the device manager or anything.
I though ok then I will stick the usb mouse into the usb-ps/2 adapter and use it that way. But that doesnt work. So it looks like i can only use a proper ps/2 mouse and thats it. Annoying.
The usb is fine though, as i transferred a load of stuff from an external drive with no problems.
One thing i also noticed was that the boot up of the machine was painfully slow when the usb mouse was attached.
Anyone got any idea please ? I've tried Msi and i know they have usb problems of some sort, just not the one I seem to be having.
Thanks in advance
Mart...
Using Bioa 1.4 , had the problems before this too. Was also using winXPSP1 too, but upgrading to SP2 lastnight and still have the same probs. HELP
Quote
Originally posted by toadie
yep thats turned on !
There was an entry for USB/kb storeage support ( spelt like that too )
and underneath there was USB Mouse Support !
All these are enabled. It's a damn pain in the backside. Think I might junk it and get an ASUS ! Have always had them in the past. All this just for a mouse ! I dunno !
Any more suggestions ?
Cheers
Did you try removing the front panel USB connection to your motherboard? sometimes that causes problems.
You could also try a BIOS upgrade (if there are some later beta bioses for the K8n)and Clear CMOS see if that helps.
Similar Messages
-
USB PORTS DISABLED AND WONT WORK FOR ANYTHING
MacBook Pro OS X (10.6.8)
the other day i had plug in a remote helicopter to our computer and came back and same the error message:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.* To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may also have been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again"
First I unplugged the helicopter and tried plugging in my phone to charge....NOTHING! so i unplugged it and tried my ipod....NOTHING! maybe the cord? so i switched cords nope same stupid ****. I reset the computer (even doing a SMC reset). nothing works! Nothing shows up in Disk Utility when plugged in either. I've looked for videos, other forum, blogs, articles, plus i can't even use Apple Tech support over the phone cause my plan has expired and Apple loves charge so much for something they could fix real fast!
please help me i'm still trying everything as we speak!
MikeDisconnect all peripherals from your computer.
Resetting your Mac's PRAM and NVRAM -
I have a Toshiba Satellite P745-S4217.My only problem is that I can't get my 3.0 USB port to work.Kindly assist as it has been working before but now it can recognize any hardware.please someone........
what device are connecting to it, and are you sure the device your connecting to the laptop is working properly?
make sure your usb 3.0 driver is up to date.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit -
Hi my edirol usb midi controller wont seem to work with gb 08 even though i have downloaded the driver.the midi controllers screen says that it is sending data and everything but still no sound...any help wouild be fantastic cheers!
Quote from: NovJoe on 14-July-08, 12:17:16
Do you have a wired USB mouse to try?
It seems to me that the drivers from the WIFI mouse is not of the correct version for the OS you are running on.
You may want to google for the correct drivers as well.
I have tried a wired usb mouse and that wont work either :(
There are only 1 set of drivers for the wifi mouse I have, checked on the manufactures website and the driver version is the exact same one as I have on disk. The mouse worked on my other pc with the exact OS
A ps2 wireless mouse works but that mouse has no range :(
Quote from: OKIGiveIn on 14-July-08, 03:05:35
Hi - I hope this helps. The problem may be hardware related in which case I can't help, but if not, try this.
Right click and delete both of the yellow mouse HID drivers in device manager. Then do a normal shutdown and Restart with the keyboard using Ctrl-Alt-Del to bring up Windows Task Manager.
This should force the system to reinstall drivers when it next boots.
You may find that a simple Scan for Hardware Changes also works after you have deleted the yellow drivers.
Another trick is to try the mouse in other USB ports - sometimes the system just gets confused and sets the device to a particular port. If it is put in another port it often can't find the device.
Good Luck
I have tried the wireless mouse in every usb port, also uninstalling them in device manager - all had no effect :( -
Lightroom wont work in Internet Explorer, flash broken
After making a picture page in lightroom and exporting, it will load perfectly in Firefox but not IE.
When opening the lightroom page, the following message is displayed:
This photo gallery requires the Adobe Flash Player.Get the free Flash Player here
It doesn't actually update, or rather the update does nothing, with IE not being able to load lightroom. I thought it could have been vista, but after moving it to another computer (XP) internet explorer can not open the page.
My fear is that some HR rep will try to view a portfolio in IE, it wont work, and then lightroom is pretty much worthless.When you find lists like that getting too long, it means -
1. You are not using CSS optimally, and
2. You are using too many fonts
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"The Scribe" <[email protected]> wrote in
message
news:ejvnq8$cj6$[email protected]..
> ok i'll have a look at validating it. yeah i realise i
have been a bit
> sloppy
> on the CSS side, ive been creating it on the fly just to
get it up online
> n
> looking like it should really. im gunna go back later n
neaten it up a
> bit,
> using the header tags and better labels.
>
> the images are very heavy too so im trying to optimise
them. I created
> seperate style sheets to deal with the seperate colours
because the list
> of
> different fonts etc was getting a bit long, but i
suppose i shouldnt have
> worried.
>
> Cheers ill have a look at it
> -
i have the new ipad 16gb it was working fine till i went to download the new itunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes and usb symbol can anybody help me.
Try these instructions:
http://support.apple.com/kb/TS3281
You may also have to go to the link in the bottom paragraph if the first page instructions do not work. -
HT1338 i have a new mac air . the usb wont work and i cant charge my i phone with it
please help me out . i have a new mac air . when i conect my cable to usb socket wont work . it wont charge my i phone either . whats wrong
I'm sure you've done everything like rebooting or testing other usb devices...have you tried to create a new user account and see if you get anything that way?, I would imagine you'd have to return the machine for an exchange at the Apple store.
-
USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?
OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.
-
Usb & sdcard port wont work in windows 7
Hi all,
my usb & sdcard port wont work in windows 7, also i cant install drivers for coprocesor and the sm bus controller, I have a macbook pro 13" A1278,
I have tryed to install the drivers from the osx cd, but to no avail it just wont work,
Please can anyone helpthe reason i ask is base system device can be a few differant things but about 90% of what i have seen it show up is the card reader. try to uninstall anything in device manager that has to do with the mic and restart the laptop. this will allow windows to try to find and install the correct drivers. also open realtek HD audio manager and make sure the mic is not muted.
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind. -
Trackpad or USB mouse wont work
I am struggling with my Macbook pro. Its an early 2010 model. Just in the past couple days the mouse wont work. It just decides it does not want to click at all. Sometimes i can get the right click to work. If i restart with keyboard commands it is fine for about 10 min then does it again. I thought it was the trackpad but it is performing fine. I can feel and hear it depress and clilck properly but no action on the screen when it clicks. If i plugin a USB mouse i get the same problem. I have reset PRAM, repaired permissions, done a hard drive verify and run the hardware test from install disk both easy and extended hardware test. And everything comes up as fine and the permissions repaired fine.
A couple months ago this computer was acting really weird and i decided to reformat with a fresh system since it had been over a year since i got it. It was a struggle to do even that. It would not install the system after a basic HD erase (which has never happened to me). I had to zero out the HD to get the system to install. It worked fine after i finally got it reinstalled and setup until now this mouse thing is happening
I am just wondering if this seems more like system corruption or a hardware issue like bad HD or bad board. I am about to reformat again but I hate to go through all that setup again if it is hardware. Anyone have any thoughts on what to try next. ThanksThe regression reported here http://marc.info/?l=linux-usb&m=137523956310060&w=2 did not solve the problem as i installed the patch found here https://bugs.archlinux.org/task/36296
Still the same message shown in the xorg log.
EDIT:
Also, after being connected the mouse connects as a keyboard, but the actuall mouse functionality dosnt work.
Last edited by Foxboron (2013-08-12 09:08:39) -
After Update USB Devices wont work anymore
Hello,
after my first Arch installation on my ASUS UX31 I had 2 problems after makeing updates:
1. My USB Devices wont work anymore, but I belive they are still recognized because they are displayes via "lsusb -t":
2-1.1:1.0: No such file or directory
2-1.2:1.0: No such file or directory
2-1.4:1.0: No such file or directory
1-1.5:1.0: No such file or directory
1-1.5:1.1: No such file or directory
1-1.7:1.0: No such file or directory
1-1.8:1.0: No such file or directory
1-1.8:1.1: No such file or directory
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
|__ Port 1: Dev 6, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 7, If 0, Class=HID, Driver=, 1.5M
|__ Port 2: Dev 8, If 0, Class=HID, Driver=, 1.5M
|__ Port 4: Dev 9, If 0, Class=vend., Driver=, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/2p, 480M
|__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/8p, 480M
|__ Port 5: Dev 3, If 0, Class='bInterfaceClass 0x0e not yet handled', Driver=, 480M
|__ Port 5: Dev 3, If 1, Class='bInterfaceClass 0x0e not yet handled', Driver=, 480M
|__ Port 7: Dev 4, If 0, Class=vend., Driver=, 480M
|__ Port 8: Dev 5, If 0, Class='bInterfaceClass 0xe0 not yet handled', Driver=, 12M
|__ Port 8: Dev 5, If 1, Class='bInterfaceClass 0xe0 not yet handled', Driver=, 12M
I need these Devices because they are my only network access via the Asix USB to Ethernet Adapter.
After the installation I have compiled and used the drives for the Asis adapter.
The both other devices are my USB Keyboard and Mouse.
2. My other problem is, that after the update my resulution of my console is very weak, this is just bad but not a real problem, I can live with that.
Thanks in advance for helping meon plugin
May 4 21:07:06 localhost kernel: [ 49.202535] usb 2-1.2: new high speed USB device number 10 using ehci_hcd
May 4 21:07:06 localhost kernel: [ 49.287984] hub 2-1.2:1.0: USB hub found
May 4 21:07:06 localhost kernel: [ 49.288333] hub 2-1.2:1.0: 4 ports detected
May 4 21:07:06 localhost kernel: [ 49.555951] usb 2-1.2.1: new low speed USB device number 11 using ehci_hcd
May 4 21:07:07 localhost kernel: [ 49.712506] usb 2-1.2.2: new low speed USB device number 12 using ehci_hcd
May 4 21:07:07 localhost kernel: [ 49.865853] usb 2-1.2.4: new high speed USB device number 13 using ehci_hcd
unplug:
May 4 21:06:57 localhost kernel: [ 40.059117] usb 2-1.2: USB disconnect, device number 3
May 4 21:06:57 localhost kernel: [ 40.059128] usb 2-1.2.1: USB disconnect, device number 7
May 4 21:06:57 localhost kernel: [ 40.059269] usb 2-1.2.2: USB disconnect, device number 8
May 4 21:06:57 localhost kernel: [ 40.059342] usb 2-1.2.4: USB disconnect, device number 9
I rebooted several times of course and it was no kernel update. -
Pop ups wont work in firefox but work in Internet explorer 8 optimized
i love using Firefox, i like that its more customizable than internet explorer but for some reason no matter how many time i uninstall and reinstall i keep having the same problem where pop ups wont work, so if im playing a game on Pogo.com and i have to open a window up, it wont work in Firefox. Is there something i can do to solve this problem, i would like to disable internet explorer on my system and use only Firefox but i need to keep internet explorer for when i need to be able to open a pop-up window.... any help would be greatly appreciated!
Does Gmail work better in a private browsing window? This is a test to see whether cookies are a factor. You can create a new private window by either:
* Pressing Ctrl+Shift+p
* orange Firefox button (or File menu) > New Private Window
More generally, when you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help? -
Ipod is recognised under my computer but wont work in itunes,
My ipod worked fine on my old computer i dont think i had the most recent itunes but everything was working fine i had windows XP. Now i have a new laptop with windows 7 and my ipod wont work in itunes, i have uninstalled and reinstalled itunes 9 and even tried itunes 8 but nothing seemed to help the situation, i know its not the cable as it shows under my computer, i have taken all my music off the ipod because it asked to reformat it i have tried that twice, i get the message your ipod needs to be reformatted for windows i click ok and it opens itunes but nothing happens, iv downloaded the 64 bit itunes as it doesnt like the 32 bit one. Iv ran a diagnostic test on my ipod but cant get past the firewire detect and usb detect maybe this is because i dont have itunes installed at the moment, any suggestions please?
I had the same problem with my iPod classic. I got a new laptop that has windows 7 and downloaded itunes 9. As soon as itunes 9 was downloaded my ipod would not be recognised anymore. I tried everything like reformatting etc and nothing was helping. What I did was downloaded itunes 7 and my ipod was then recognised. Your problem may be that your software on your ipod is not up to date enough to run on itunes 9 (that was the problem with mine) and may also not be up to date enough to run on itunes 8. Try itunes 7 (or if that doesn't work even itunes 6) then once your ipod is recognised go to the summary page on your ipod and update your software to the current version. Once i did this my ipod was recognised on itunes 9 when i plugged it in and worked perfectly. Hope this helps!
-
Everytime i go on Itunes it tells me i have to restore my ipod but everytime i do, it just tells me to do it again? When i try and use my ipod it just has a connect to itunes sign and nothing else, it wont work at all?
I updated itunes and everything but nothings working and i just can't figure it out?
Everytime i restore the stupid thing, it never pops up in my itunes again like its supposed to!Loop
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Please help me my ipod wont work! D:
I need serious help D:! ok so i have succesfully synced music onto my ipod b4 but i wanted more songs so i was syncing music onto my ipod touch once again and once the sync was almost finished it said something about an error and then when i unplugged my ipod all of my songs that i had 1st put on my ipod were gone D:! after that my ipod stopped showing up on itunes on one of my computers so i switched to the other and it started doing the same thing. i came on here and was told it might be because itunes wasnt up to date so i updated itunes and my ipod but after the update, during the time when it was backing up software i think, another error popped up and said something about how the session had timed out, my internet connection is fine to so it wasnt that. after that another error popped up saying i needed to restore my ipod back to its factory settings and i said ok but another error always pops up saying the sesion timed out of something! now my ipod is like it was when i first got it! the screen shows the end of a usb cord pointed at the itunes sign! ive tried turning it off but it wont work! and when i try to hook it up to itunes on either off my computers it doesnt show up in itunes and a message from windows pops up and says "Found new hardware: Windows needs to install driver software for your apple mobile device (Recovery mode)" please help me i cant even do anything at all with my ipod right now! D:
The Internet provider might have too many people using the Internet than what the particular servers are setup for. Or your computer just needs to reset. Try restarting your computer. Also do a hard reset on the iPod. Hold the power button and wake button down until you see the apple logo come on. Let go. Then let the ipod finish bopting up . Then restore your iPod as a new iPod, NOT from the backup.
Maybe you are looking for
-
Open order and Open delivery in Credit Exposure FD32
Hello Guys, I am now trying to include Open order and Open delivery values in Credit Exposure FD32. I have configured the following settings, but the Open order and Open delivery values still cannot show in Sales value under Credit Exposure FD32. Can
-
How to save data in a string control?
I want to save data in a string control or indicator. I know that I can rt-click and make the data default. But can it be done through a proberty node or something else when the program is running?
-
Hi there, some days ago I purchased an Airport Extreme router with disk to move my iphoto library there and free space of my crowded macbook pro. Everything was working well (iphoto takes a little bit longer to start and quit) but now I can't see my
-
Using computer variables in task sequence "Run Command Line"
I am attempting to deploy VMs through VMware's vRealize Automation tool using CM. The process creates a CM computer object then creates a direct rule on a CM collection for the new computer object. During the creation of the computer object vRA creat
-
FI-SL Delta Handling: Note 328197
Due to a project requirement we are considering the implementation of note 328197, in order to extract FI-SL data in Delta Mode (ABR). FI-SL Extrators are already in use with some Virtual InfoCubes, and we would like to access the same DataSources to