Usb internet invalid ip invalid ip configuration

I have a Lenovo tablet a3500-fl
usb internet invalid ip invalid ip configuration
I did once connect via usb internet, second time didnt work
I cant fix this
error is internet invalid ip invalid ip configuration unidintified network
tried open control panel network and sharing center change adapter settings local area connection properties and change/unchange Internet protocol version 4 /TCP/IPv¤) to automaticaly and the same to local area connection 2 (which is Lonovo a3500-fls usb internet
Winndows 7 64
Windows 8.1 64

Thank you, enzo46, for your suggestion but I don't understand how it would work to solve the problem. I'n not asking the ISP to assign a pubic IP address to the AEBS. Instead, I'm asking the router/modem, which is acting as the DHCP server for my private network, to assign a private IP address to the AEBS. The ISP has no visibility into my private network and therefore cannot assign a private address to the AEBS. Also, the router and the modem are integrated so I can't unplug them separately.
On the other hand, if you are suggesting that the router/modem be unplugged to reset its pool of addresses and that I have the AEBS release its currently assigned IP address before trying to reconnect, I can see where that might be helpful

Similar Messages

Nokia usb internet stick C-12 configuration problems and internet sharing

While set up is said to be simple, once done and you are connected the problems start when you are disconnected and try to reconnect, sometimes you can, but in the majority can't, which requires you to restart the computer, however the computer tends to freeze so you have to shut it down by holding down the little silver button. At the same time the Nokia program, which self installs itself in Network connections, has established up to 3 Links in "Location" and deleting two of them does not help, they soon re-establish themselves.
Any advice on how to configure this unit would be very much appreciated as its my own link to the outside.
In addition, when using previous USB internet keys I have been able to use internet sharing for my iPod Touch, but am at a loss with the C-12.

I had already done this and a blog by brightpointuk, on page four, setting out in pictorial format the installation helped, but did not suggested what the conflict may be after your link is dropped and you try to reconnect several times, failing this you then try to restart the Mac, but it freezes, which results in you having to press the top right silver shut down button, in the process I have seen a notice to say the C-12 won't shut down and needs to be forced quit, but as the Mac is frozen you can't do this. Once restarted its possible to reconnect until the next event and then the process may have to start over again. Thanks for the suggestion.

N73 - error "internet : invalid phone number"

i try to make a program use J2ME. this program is only add "*11" before the phonenumber. the format is like this :
example : 081805135895 (phone number)
*11081805136895 (after add "*11")
if this number send to provider, it make user can use a fiture from this provider.
I have "textfield.phonenumber" to get the phone number from user. when i fill this textfield with searching from phonebook, my program can work well. But, when this combination number send to the provider, N73 show error "internet : invalid phone number". in fact this program can run at nokia 6600, and some phone from Sony Ericsson.
i hope somebody can help me ... plizz....
thank you

Its not something that SKYPE doesn't know about. This same problem has been going on intermittently since 2011. (There are posts that date back to January 2011)
This seems to be a problem that Skype is unwilling to solve or fix.
Perhaps if people called the Better Buisness Bureau and other authorities like the FCC, perhaps after a few million in fines they'll be willing to actually fix the problem.
IF their company is not in the US, then they can be banned from operating in the US. This would create a problem for them as all countries would follow suit...except china.
This problem might be considered a fraudulent service as you are paying for a service you can not use or promised services are not available as stated.
So all the "moderators" that try to regurgitate the "make sure..." manifesto don't really have a clue. Its also not possible to hold moderators responsible for "placating" people with BS solutions as their usually not part of the company nor are they being paid to "moderate" forums.
The only thing you can truly do is cancel your sub for Skype or just not renew it when it ends, this is what I plan to do. I can get vonage and pay a bit more and get problems solved. Perhaps when they lose a few million "PAYING" customers they'll acvtually get a proper support service and start acting like they have a service to render.
Thats my advice, like it or lump it you know I'm right. So go get vonage for VOIP and drop Skype until they get a clue as to what their doing.

Invalid switch configuration-oob error

Hi all,
We are using NAC in OOB Virtual Gateway mode only for wireless users.But we are facing an error on user PC stating that,
    invalid switch configuration-OOB error:OOB client MAC ADD/IP ADD not
                   found. Please contact your network administrator.
              Please contact your administrator if the problem persists.
Thanks in advance.

Please check your snmp settings on the wlc and the manager. This is usually seen when the agent passes the mac address and clients ip address to the CAS but the CAM never receives the mac notification trap.
thanks,
Tarik

HT5639 Can I use usb internet sticks and/ or printers which don't speak apple with boot camp and win 7/ 8?

Hello all,
As a reference point for my technological skills, I work in international development and in timber framed building construction and repair. Beyond Ford full- size pick-ups pre 1993, I mostly employ 19th century systems.
This MacBook Pro is marvelous, but won't read or accept some older printers and usb internet sticks. There is also a problem with windows 8 on many of these international and older/ cheaper US devices. Will a MacBook Pro be able to communicate with them in windows 7 running on Boot Camp, or on any of the other Windows on Mac platforms? Does one work better with old stuff than another? Are any of them simpler/ more intuitive to use than others? Any informtion or suggestions, no matter how basic would be appreciated.
Thanks,
Rob

I have tried it with all 3 options. I tried the first two options with the printer plugged into port 1 on the adapter and the third option with the printer plugged into port 2. This means that I may have effectively installed all 3 options/scripts. Do I need to throw them away and start again?
Running the Choose Serial Port script writes a file that is used in processing print jobs. If you run the script a second time, it will replace the existing file with a new file.
Do I also need to configure these ports in the network settings under System Preferences?
No.
I notice too that no 'location' is given for the Stylewriter II, whereas a location is given for my other (Lexmark) printer, which is connected to the G5 iMac directly via a USB cable.
That is of no consequence. Use of the Location field is optional.
I would suggest you proceed as follows:
1. Go to the /Library/Receipts folder at the root of your hard drive. Delete the item Foomatic for StyleWriter.pkg.
2. Start the installation over from the beginning. Install the Foomatic for StyleWriter software.
3. Run the Choose Serial Port for StyleWriter script. Upon further reflection of your possible use of two Keyspan adapters, I would suggest you choose the serial port with the format USA28X...P1.1 rather than KeySerial1.
4. Run the Add StyleWriter to Printer List.
Try printing a document. If it still does not work, download a troubleshooting script from my website http://webpages.charter.net/mbroughtn/downloads/Test7Stylewriter.command.zip Run the script. Copy and paste the contents of the Terminal window in a reply. That should point to what is going wrong.
Matt

Could you please help me connect my Telstra usb internet stick to my new Macbook Air? This is my first Mac and I am really struggling!

Hi,
I just brought my first Mac at Christmas and I am trying to connect my Telstra usb internet stick to it.
The Mac recognises the internet stick and the widget pops up for the stcik but then asks me to register the internet stick with this computer. I am provided with a a description on how to do this (go to Open Network Preferences > a new pop up will say New System/internet found etc), but the "new system/internet pop up never appears, so I can click on the "directIP" showing on the left hand sinde of the Open Network Preferences windon, but then I dont know where to go from there.
Could anyone help me with a step by step (aka lamens description) of how to fix this?
Thank you very much!

Hey there, my experience with the Telstra USB internet dongles is a little different, don't think you need to fuss with settings and all that, it's basically designed to plug and play almost.
When you plug it in, it should prompt you to install the Telstra utility. Have you done this? You will know because in your 'Applications' you will see a Telstra icon. You need to use this utility to connecto the internet.
So, if you have this, simply double click it and when the utility opens, click 'Connect' and as long as the dongle can detect the network it will connect. There should not be any other configuration required.
If that utility is not there, then install it. When you plug in the dongle, you will see it appear as a drive, should be able to just double click it and then go through the installation process.
Failing all that, head into a telstra store and the guys there will sort it out for you quite quickly.

Using nic nas and usb internet simultaneously

i use my nic card to connect to a nas. i use a usb device for internet.
both work simultaneously on my pc and worked on my older g4 which both were connected to a router and were able to also share pc-pc.
i now have a g5 (ppc) and cannot get the nic/nas and usb internet device to work at the same time.
I reassigned device order with ethernet ontop (worked on the g4) and it doesn't work. I have to constantly turn one device off and the other on and vice versa for which device i need to use at that time.
how can this be resolved please...it's very frustrating.
thanks.

The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712

Problem activating usb internet on A3000 white

hello,
i just bougth A3000 white tablet but i can't make it to connect to PC shared internet using usb cable
(USB internet)
it gave me
unidentfied network
[no network access]
i'm using win 7 ultimate
any help?

1- make sure you enable (usb debugging mode)
2- connect the usb cable to PC with good internet connection
3- press that (usb internet)
4- follow the instructions that appears on the tablet to configure and enable internet sharing on the (properties) of the internet connection you want to share (on PC)
Done ...

How to connect my USB internet modem to iPad2?

hi,
I am looking for way to connect my USB internet modem stick to iPad2; I understand one way is to get a pocket Internet hub and thru that I can connect via WiFi.
But is there any way that we can directly connect the USB modem to iPad and use it?

A 3G wireless router may do the job. I have used that years ago.
http://www.aztech.com/prod_3g_hw550.html

After installing Lion, sharing my USB internet connection no longer works on my iPhone4.

I have a USB internet device and have been able to share that connection with my iPhone without problem, until installing Lion. I searched the web, and someone suggested changing my encryption to 128, which I did. For a few hours that worked, but now it's not giving me a decent connection. Anyone know why and what the solution is? Thanks.

I am having the same problem. It worked fine (connecting my iOS devices to my macbook pro using internet sharing) until Lion. Then it all went to ****.

Altell USB Internet Connect Card connection Problem

Altell USB Internet Connect Card
My daughter is using and Alltel , UT Star Com, UM 175 wireless connect card on a iMac G5 with OS 10.4.6. She had a good internet connection for two days, then nothing since. She has had many phone tech assistance with Alltel, but still unable to reconnect.
In System preferences it shows that she is connected via “Pan Tech USB Modem” port 777. She is getting good signal strength with send and receive signal and connect time. However, when using Safari and Mail app she is unable to connect to the internet.
It seems to me that the problem lies within the set=up between the iMac and Alltel card. The card seems to be making the connection, but for some reason the computer can’t realize that this card is the way to the internet. Safari brings up the usual “you are not connected to the Internet”, then the diagnostics application that guides you through troubleshooting with the usual questions, none of which include a wireless USB connection.
Is there some other thing she needs to do for her iMac to recognize the Altell card?

I just gave up on this problem and went in another direction

On MacBook Air not work the Internet from iPad Wi-Fi mode, but work from iPad USB internet mode. Please help me) Thank)

On MacBook Air not work the Internet from iPad Wi-Fi mode, but work from iPad USB internet mode. Please help me. Thank)))

The following link has a Wi-Fi troubleshooting section for personal hotspot that may help: iOS: Troubleshooting Personal Hotspot

CLEAR Stick Atlas USB internet

My CLEAR stick Atlas USB internet device stopped working in the Mac. The device appears to be working correctly and works fine in my Dell laptop, however when I connect it to the Mac and open Safari it says I'm not connected to the internet. Please help.

They said that I have to update the Firmware of the device. So I went to the CLEAR website and downloaded the Firmware file in the Mac. When I tried to open it I've got a message error saying that the file is not recognized by the computer because it has a .png extension. I thought .png is a graphic file and not an application. So, because of that and the fact that the device is working in my other laptop I'm thinking that the problem may be in the Network settings and that is when it gets complicated for me because I am not familiar with DCHP's and IVP's, etc.

How to Enable USB Internet Dongles and only Block USB storage device from Group Policy

Hi ,
I have a very urgent requirement , Is there a way to disable the USB and only enable to Internet Dongle using Group policy.
Regards,
Schan.

Hi,
Checkout the below link for restricting the access for USB devices using Group Policy,
http://www.windowsecurity.com/articles-tutorials/authentication_and_encryption/Control-USB-Devices-Group-Policy.html
Checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/en-US/89c8a8f0-da98-4cc9-8044-1e457e26840e/how-to-disable-usb-internet-dongle-datacard-from-group-policy-server-2008-r2?forum=winserverGP
Regards,
Gopi
www.jijitechnologies.com

Please,I want to stop users from visiting particular wensites while connected to the internet. How do I configure Firefox to automatically stop users from visiting such dangerous sites?

Please,I want to stop users from visiting particular wensites while connected to the internet. How do I configure Firefox to automatically stop users from visiting such dangerous sites?

Thanks, Ronda! I haven't been able to try your suggestion because I fried my router! So I need to get a new wireless router before proceeding.
(I may start a new thread about getting a new router, but I will look for answers first to my questions and only start one if I cannot find answers.)
After I get a new router, I will try what you suggested and report back here.

Usb internet invalid ip invalid ip configuration

Similar Messages

Maybe you are looking for