USB is not recognizing the device and giving error 10

My PC USB is not recognizing the device (iphone) and giving error 10.. The USb is malfunctioning but ipod is getting connected easliy

Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes.

Similar Messages

  • Anyone having trouble with this phone and their in car bluetooth?  Calls dropping not recognizing the device.  Had the car bluetooth reset at dealer. They said it is a common problem with the iPhone?

    Bluetooth in car is not recognizing my device and when it does it will only stay connected about 5 minutes.   Blue tooth has been reset at the dealer. They said it is very common with the iPhone? The car is a 2014 Toyota Highlander.  This is very very frustrating as I have a 45 minute commute to work and do not want to have to hold my phone.... Thank you for any help.

    sstaylor2001 wrote:
    I have already done all of that.  It still doesn't work. My husband has the same phone and a 2013 toyota and his is fine. Toyota told me it is the brand new cars and the new apple update.  Need to figure something out.  This phkne is useless now and I've had a iPhone for 5 years
    Wow you would think the newer car is just an updated version of what your husbands has.
    I wonder if your husbands car was updated to the same connect system if his would not connect?
    Does your husbands phone work because he does not have the new iOS from Apple?
    Can he hook to your connect system in the car?

  • My child has disabled her ipod and i have had to reinstall itunes which is not recognizing the device to enable us to restore to factory setting

    My child has disabled her ipod and i have had to reinstall itunes which is not recognizing the device to allow me to restore ipod to factory setting.

    Try here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • My iphone is blocked and I am being told to pluig it in to itunes but the itunes it was set up with is not recognizing the device - can anyone help?

    My iphone is blocked and I am being told to plug it in to itunes but the itunes it was set up with is not recognizing the device - can anyone help? 

    I also live in the United States so redownloading shouldn't be a problem.

  • I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

    I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

    Hey Stan1958,
    Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Thanks,
    Matt M.

  • HT1414 i was updating my iphone 4s but an error occured while updating it. my computer is not recognizing the phone and i cant restore it.

    i was updating my iphone 4s but an error occured while updating it. my computer is not recognizing the phone and i cant restore it.

    See this support document for help. You may have to do this more than once. http://support.apple.com/kb/HT1808

  • Z2 suddenly Not recognizing the SIM and no signal.

    When I'm using data for straight for like 2 or 3 hours, the phone suddenly stops recognizing the SIM and it shows no coverage. I have to restart the phone all the time :/

    For hardware issues you think you may have you are best to either return your device to the place of purchase or contact Xperia care and have it inspected http://www.sonymobile.com/global-en/support/contact-us/
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Critical: My BB Passport not recognizing the device password

    Hi Support folks, Have been using this Passport for 45 days and today surprisingly it is not recoginizing the device password. Its says 5 more attempts left, however I have tried it many times more than 10 times and still shows the same message. I tried to connect to BB Link and when entered the device password it just thinks and does nothing. I feel the backend  file associated my device is locked out. I tried restarting the device several times with no luck. I have to access this device asap to access my data, mails, contacts and make calls. Pleae help me asap.

    I had a real bad 6-8 hours in my life. Things I tried with no luck: - Entered the correct password close to 100 times still it says 5/10 attempts- Restarted the phone by using the power button Long 10 seconds press - Many many times , No luck- Hard restarted the phone many times by long pressing the Volume Up and Down button, No luck- Connected to the MacBook, BB Lynk asked for the device password 1/10 attempts and nothng happens after entering the password. It just sits there. Disconnected the phone and tried the same process almost 20 times with no luck.- On my MacBook, connected the device and BB Blent was showing all the files and contents on my device, it allowed me to copy all the files. This is a security loop hole in BB. Even if the device is secured and connected, one can copy the data. Doesnt this sound horrible for a business phone?- After several attempts to connect to BB Link I have got the reload option enabled before entering the device password on my MacBook. Doesnt this sound weired? I then clicked on reload and got a confirmation Yes/No. I clicked on No and then it asked for the device password. Entered the password and it accepted. So basically, I fooled the BB reload option/system. Overall, BB is not up to the mark when it comes to security. What could have happened? A. The file associated for the BB System password become inaccessable due to the lock on the file. I want the BB developers to look in to this matter seriously and strengthen the BB system to built confidence for the business users. I am sending an alert to all the BB users in y organization to be careful and try to stay away from BB since data is everything what we deal with and its all classified. I will also be writing about this in all the possible consumer forums to create awareness. Regards,Aljo George

  • HT4623 My Iphone 4 is locked with the plug in icon and will not go away. My computer is not recognizing the device. I have tried to reboot it but it's frozen. I was updating it to the new software and it came up with an error and said it couldn't update

    I was updating my Iphone 4 with the new software and while it was doing the download and update, an error window appeared and it said it couldn't update and now my phone is frozen with the plug in icon. I have tried to reboot it, pushing the power button and the home button and nothing is working

    Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes.

  • USB Issue - Not recognizing ANY device

    I am having a problem with my USB ports.
    First of all, I have a IBM Thinkpad T42 - model number 2373-9XU.
    I have the latest BIOS and all the latest drivers for the USB ports.
    The issue just started a couple days ago.  Whenever I plug in a USB device, such as my IPod or my Smartphone, it is NOT recognized by my computer.  However, any device that I plug into the USB port will start charging.  So, I know there is power to the USB ports. 
    I have uninstalled the USB drivers and reinstalled them, still having the same issue. 
    Also another note, I was looking through the device manager under System Devices and there was a yellow exclamation point next to "ISAPNP Read Data Port".  The error code on it was "This device cannot start. (Code 10)"
    Any suggestions?
    PS.  I have tried to reinstall the BIOS, but when I do that it says "No update is needed at this time" and won't let me install it.  Is there a workaround to that?
    Message Edited by skiutah1080 on 01-27-2008 07:38 AM

    So, I looked at the Services information on the Recover and Restore startup utility (pushing the AccessIBM button during startup) and found the following:
    Service: upnphost
    Name: Universal Plug and Play Device Host
    Status: Stopped
       (Previous Status: Running)
    Startup: Manual/On-Demand)
    Path: c:\windows\system32\svchost.exe
    Vendor: Microsoft Corporation
    Version: 5.1.2600.2180
        (xpsp_sp2_rtm.040803-2158)
    Could this also have something to do with the USB ports not working properly?

  • IPod Gen 5, I need to reset it, but iTunes is not recognizing the device?

    I have an iPod touch that the kids disabled, but when I plug it into the cpu in recovery mode windows recognizes it but iTunes doen't?  Please help?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Then if necessary:
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • IPod screen says to plug in to iTunes, but iTunes will not read the device and the iPod cannot be restarted by home and lock buttons. How do I fix this?

    The screen shows the usb cable pointing to the iTunes ico. I've tried resetting the device by using the home and lock buttons, but the same screen shows up. Just redownloaded iTunes, but I can't get it to see the device.

    Did you try to connect in recovery mode, explained in this article? iOS: Unable to update or restore

  • HT201412 Iphone 4s is frozen on the black apple logo screen. have tried to hard power off but it will not turn on. Have connected to computer but device it is not recognizing the device so can't do an itunes update. any suggestions?

    My phone is frozen and I can not get it to "Wake up"
    Stuck on the black apple logo screen. And my computer and itunes are not responding when I plug it in.
    Any ideas?

    try doing a restart / reset first
    http://support.apple.com/kb/ht1430
    if this doesn't work
    You can try the step here in this link.
    http://support.apple.com/kb/ht1808
    when you're stuck on the apple logo, the operating iOS doesn't load so itunes could not detect the device

  • Got a ipod touch, downloaded itunes and it said to update the software to 5.0.1, now when restoring the ipod - itunes doesnt recongize the device and giving me error 1611... any suggestion

    help

    Here's what the article iTunes: Specific update-and-restore error messages and advanced troubleshooting  says about your error:
    Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.

  • Computer not recognizing my device

    had to reset my ipod touch. Now when i plug it up to my computer the computer is not recognizing my device and syncing.

    See:
    iOS: Device not recognized in iTunes for Windows

Maybe you are looking for

  • HT5557 How do I use my iTunes account balance to purchase from iBooks?

    How do I use my iTunes account balance to purchase from iBooks?

  • Opening a new page on click of a button

    Hello Everybody, I have a small requirement. i need to open a new web page on click of a buttton on a bsp application. How do I achieve this technically? Thanks, Paul

  • 3D PDF - Replace Part Names

    Hello We are creating 3D PDF files from Autodesk Publisher for our client to use for review of the assemblies. Feedback from the client has revealed that they are struggling to navigate the parts hierarchy tree in Adobe Acrobat Viewer because all the

  • Posting Period MMPV

    Hello All, I am trying to post stock to a Material in the MB1C transction. But I keep getting this message "Posting only possible in periods 2009/06 and 2009/05 in company code SPIL". I have opened the period in MMPV. Can some one tell me where do we

  • PKGBUILDSs for Thunar with LUKS support

    Hi, I've made some PKGBUILDs for exo-svn, thunar-svn and thunar-volman which use patches to provide support for LUKS encrypted devices in Thunar. I didn't upload them to AUR, cause I will not use the packages. I only wanted to see if it works already