USB Issue with Flash Drives

I am running XP Pro with SP3 and all updates as well as all Bios updates with Lenovo.
I have an issue with my USB ports. Everytime I put a USB flash card in any slot I do get installation and driver installed correctly. But when I go to the Explorer I get "is not accessible" Then it says under that "The process cannot access the file because it is being used by another process" But when I leave the USB flash drive in the drive and reboot I am able to to access the drive. Any suggestions on this issue I am not sure if it was the Bios update or one of the XP udpates. Anyone else come accross this issue?
Thanks,
Scott

Would you try this:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
I don't know what you are looking at to determine space available. You need to do that by selecting the device's Desktop icon then press COMMAND-I to open the Get Info window. The capacity and available space will be displayed in the Get Info window. A portion of the device will be allocated for the RDB and directory, so some space will be shown as in use.

Similar Messages

USB issues with External Drive

I am running a 1 TB Fantom drive (MDC1000) (2 Partitions) on new OS 10.5.6 MacPro via one of the back USB ports. Been using the drive for over a year with no problems.
Now intermittent issue with mounting drive. After successfully mounting and letting the drive cycle down, the USB2 connection disconnects when the drive starts back up again. I receive the Device Removal Message, then the drive tries to remount. Then I receive the message again. What is strange is that the drive seems to work fine when data is being accessed consistently.
I clicked off the "put the hard disc to sleep" checkbox in the Energy Saver preference which seemed to stabilize the intermittent problem, but now there is an issue with the machine not coming out of sleep, and I get the startup clock icon when I try to restart. The machine does not shut down with the USB connected.
I'm still trying to determine if it's the drive or the machine. I ran the disc utility and repaired the disc as the intermittent disconnections seem to corrupt the trees and directories. I am able to fix them. Is there any utility for testing the USB ports? There should BE.
Could this be due to a recent update? Or lack of firmware update from the drive manufacturer? Seemed to come out of nowhere.
Thanks for any info.
Message was edited by: jfc999

Just to follow up with this for anyone has a similar problem.
Tried new cables and seemed better for a short time, but then still would not mount successfully.
I called Micronet after I didn't hear back via their email form. The tech there seemed to suspect it was the power connection on the network card in the drive which would make some sense. He confirmed there were no firmware upgrades for the Fantom drive.
Also tried to mount the drive unsuccessfully via Firewire and it did not work.
So my conclusion is that it's not the drive mechanism but the network card in the drive. I have a sinking suspicion that there is a power issue in my office space, which may have affected the drive. I've had other machines and devices which have had power issues in the past.
Does anyone know any simple and easy way to test electrical integrity in a work/office environment?
I bought another 2tb drive, transferred the data and reformatted the old drive to see if that does anything.

IMac goes to sleep unexpectedly, Finder issues with flash drives - related?

My iMac falls asleep for no known reason, often in the middle of active use. (Similar problem recently described in thread with messageID=11829917.)
Sleep onset is frequent but seems to vary based on both currently-running software and attached devices (particularly USB flash drives). It will almost always wake up when I hit the space bar afterward, but might sleep again within a minute or two, then not for an hour or more. The sleep occurs with little notice (brief stall of display, sometimes enough time to click on another app window and bring that forward before the screen goes dark), and 95% of the time the computer wakes up after hitting the spacebar. The other 5 % of the time the display reappears but the entire OS is frozen and usually requires unplugging the power cable. There are other symptoms in the Finder - more below. Once in a while the fan revs up like a WWII fighter plane taking off from a carrier, but this is unusual and all the really irritating stuff also happens without this symptom, which usually stops on its own. Immediately after reawakening error messages are displayed to report that flash drives were improperly disconnected (Tell me about it! This has been the case for several months whether the computer goes to sleep by itself or if I put it there manually.)
The computer seems to go into sleep mode most frequently when not-particularly-demanding graphics (Photoshop Elements and Adobe Reader) and video (QuickTime Pro 7.6.4) apps are running. Turning these off makes nod-offs less frequent but doesn't stop it entirely. When video thumbnails are displayed in Finder windows a lot of time may be required to load the data and this often paralyzes everything else AND this also seems to be a trigger for a nod-off (i.e. QuickTime not necessary to make the computer choke). This is highly variable and some video clips load quickly (< 20 sec), while others take several minutes, and this doesn't necessarily correlate with file size.
Another factor is whether flash drives are connected - these seem to make the nod-offs more frequent AND Finder regularly loses communication to these both while just sitting there and also in the middle of file transfers. A very early 250 MB drive (Lexar - vintage 2004) will always communicate, but different USB2-capable drives all are either unreliable (Lexar 8 GB and KData 4 GB both < 1 yr old) or apparently dead (Lexar 2 GB ~ 2 yr old). The failures may be damaging the drives - they are inconsistent-to-bad at communicating with my MacBook Pro. I know this sounds like the drives are at fault, but there are things which make me suspect the OS (both computers use the same version): 1) different flash drives display the same on-again-off-again behavior AND the 2) the 2 GB drive that hasn't communicated with my Macs in over a month has no trouble talking with my wife's WinXP computer. When communication isn't working with these drives, they do not show up in either Finder or Disk Utility. When the Mac-dead 2 GB Lexar is plugged into either computer and I launch Disk Utility, the initial scan for drives never finishes so I have to force quit. (When they are working, on the iMac the large drives only appear in Finder if I go to User and press Command-uparrow (to go up a directory layer) - in columns display mode nothing appears in the left-hand column.
(The following describes a set of problems I've had a little longer and which may or may not be related):
At times the Finder loses some but not all functions:
1) Sometimes files in the Trash can't be ejected* even when all apps are turned off
2) usually when problem 1) is observed, no keyboard commands work: nothing happens when pressing Command-W, Command-uparrow or Command-N to open a new window. Text typed will not be entered to change filenames (but this can still be done by typing the desired text in TextEdit, copying there and selecting and pasting with mouse commands.)
<* I have downloaded an app for forcing file deletion, but haven't really needed it - the delete option and keyboard commands all return after shutdown and reboot, and there's usually enough annoying stuff going on by this time that that seems the best thing to do.>
Things which I've tried to fix it with so far (not in this order):
- blowing dust out of the back with canned air
- checking temperatures - CPU/GPU showing 72/73, HD bay 51, etc.
- fixing permissions from normal boot
- boot from install disk and running extended hardware test (no problems found during scans repeated several times during the past month)
- fixing permissions and running Disk First Aid from install disk boot
- getting files off the hard drive (was as low as 3 GB free space, currently ~ 35 GB and climbing)
- clearing PRAM
- resetting system manager (name? - hold down power button when reconnecting power cable, etc.)
- Power Saver display and computer auto sleep are shut off (both on "never" - I regularly put it to sleep manually)
- virus scans (Clam XAV)
I realize that this is a kitchen sink collection of symptoms, but these things may be related and if so, OS developers may want to be sure these problems are avoided in current versions. (Yes I will upgrade my OS soon...)

Thanks for checking in, Miriam - sorry to get testy about it.
The iMac's RAM is maxed out (2.5 GB)
Yes, the system log does report overtemp message to Power management prior to shutdown (today's log at end of post)
Where do I find normal temperatures for the system? What are the important parameters to watch and what sort of fixes are possible?
iStat currently shows:
HD 54° CPU 67° GPU 72° Incoming air 38° (???)
HD bay 54° GPU ambient 71° opt drive 49°
==========================================
Console.log was largely full of stuff about a bad flash drive I stuck in as a Hail Mary and failure of communication with a scanner (old HP, driver package installs a program which starts at launch which doesn't show up under Startup Items. Apparently the permission got mislaid, so I fixed permissions and this seems OK now. (Only included that because some of it shows up in System.log and it's not worth focusing on.)
[That all said, there is a software/OS component to the problem and it is graphics-related. The other night I was looking at some flash videos in a series and one in particular repeatedly caused shutdown, while others played normally: domain = jebhost.com /youtube/list.php?q=Henry+8.o&Submit=GO "The Tricycle Thief" only played through once out of about six tries.]
=========================================
System Log Aug 1 (last addition 20 minutes ago)
Aug 1 14:52:46 gerda-kilgores-imac-g5 cp: error processing extended attributes: Operation not permitted
Aug 1 17:07:42 gerda-kilgores-imac-g5 cp: error processing extended attributes: Operation not permitted
Aug 1 17:23:51 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::init(0x46c34c0)
Aug 1 17:23:51 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::free()
Aug 1 17:24:07 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::init(0x3827ec0)
Aug 1 17:24:07 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::free()
Aug 1 17:38:33 gerda-kilgores-imac-g5 kernel[0]: disk1s1: I/O error.
Aug 1 17:38:33 gerda-kilgores-imac-g5 diskarbitrationd[40]: unable to repair /dev/disk1s1 (status code 0x00000008).
Aug 1 17:38:41 gerda-kilgores-imac-g5 kernel[0]: USBF: 31965.839 AppleUSBEHCI[0x360e800]::Found a transaction which hasn't moved in 5 seconds on bus 75, timing out!
Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31966.868 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31966.901 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31967. 23 ControlTransaction: control packet 1 error 0xe0004057
Aug 1 17:38:49 gerda-kilgores-imac-g5 kernel[0]: USBF: 31973.868 AppleUSBEHCI[0x360e800]::Found a transaction which hasn't moved in 5 seconds on bus 75, timing out!
Aug 1 17:38:53 gerda-kilgores-imac-g5 kernel[0]: USBF: 31977.938 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:38:53 gerda-kilgores-imac-g5 kernel[0]: USBF: 31978. 2 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:38:56 gerda-kilgores-imac-g5 kernel[0]: USBF: 31981.506 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:38:56 gerda-kilgores-imac-g5 kernel[0]: USBF: 31981.571 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:38:59 gerda-kilgores-imac-g5 kernel[0]: USBF: 31984.264 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:38:59 gerda-kilgores-imac-g5 kernel[0]: USBF: 31984.329 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986. 31 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986. 64 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986.187 ControlTransaction: control packet 1 error 0xe0004057
Aug 1 17:39:02 gerda-kilgores-imac-g5 kernel[0]: USBF: 31987.712 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:39:02 gerda-kilgores-imac-g5 kernel[0]: USBF: 31987.774 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:39:03 gerda-kilgores-imac-g5 kernel[0]: USBF: 31988.139 IOUSBCompositeDriver[0x46bea00](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989. 55 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.178 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.204 ControlTransaction: control packet 1 error 0xe0004057
Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.479 IOUSBCompositeDriver[0x46bec00](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
Aug 1 17:39:05 gerda-kilgores-imac-g5 kernel[0]: USBF: 31990.455 ControlTransaction: control packet 1 error 0xe0004057
Aug 1 17:39:05 gerda-kilgores-imac-g5 kernel[0]: USBF: 31990.503 IOUSBCompositeDriver[0x36cb380](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
Aug 1 17:49:08 localhost kernel[0]: standard timeslicing quantum is 10000 us
Aug 1 17:49:08 localhost lookupd[43]: lookupd (version 369.8) starting - Sun Aug 1 17:49:08 2010
Aug 1 17:49:08 localhost kernel[0]: vmpagebootstrap: 633665 free pages
Aug 1 17:49:08 localhost memberd[41]: memberd starting up
Aug 1 17:49:08 localhost kernel[0]: migtable_maxdispl = 70
Aug 1 17:49:08 localhost kernel[0]: 92 prelinked modules
Aug 1 17:49:08 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Aug 1 17:49:08 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Aug 1 17:49:08 localhost kernel[0]: using 6553 buffer headers and 4096 cluster IO buffer headers
Aug 1 17:49:08 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
Aug 1 17:49:08 localhost kernel[0]: DART enabled
Aug 1 17:49:08 localhost kernel[0]: USB caused wake event (EHCI)
Aug 1 17:49:08 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe261dcc; max speed s400.
Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::probe:
Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::start before command
Aug 1 17:49:08 localhost kernel[0]: Security auditing service present
Aug 1 17:49:08 localhost kernel[0]: BSM auditing present
Aug 1 17:49:08 localhost kernel[0]: disabled
Aug 1 17:49:08 localhost kernel[0]: rooting via boot-uuid from /chosen: D5C0BAB6-ADB2-3A2A-9DDD-6F971A163F6B
Aug 1 17:49:08 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Aug 1 17:49:08 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@3/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/WDC WD2500JS-40MVB1 Media/IOApplePartitionScheme/Untitled 3@3
Aug 1 17:49:08 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
Aug 1 17:49:08 localhost kernel[0]: jnl: replay_journal: from: 2051072 to: 8100352 (joffset 0xa701000)
Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::stop
Aug 1 17:49:08 localhost kernel[0]: AppleSMU -- shutdown cause = 3
Aug 1 17:49:08 localhost kernel[0]: AppleSMU::PMU vers = 0x000d0092, SPU vers = 0x56, SDB vers = 0x01,
Aug 1 17:49:08 localhost kernel[0]: IOBluetoothHCIController::start Idle Timer Stopped
Aug 1 17:49:08 localhost kernel[0]: HFS: Removed 2 orphaned unlinked files
Aug 1 17:49:08 localhost kernel[0]: Jettisoning kernel linker.
Aug 1 17:49:08 localhost kernel[0]: Resetting IOCatalogue.
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 0
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[33]: starting
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
Aug 1 17:49:08 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
Aug 1 17:49:08 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Aug 1 17:49:08 localhost DirectoryService[46]: Launched version 2.1 (v353.6)
Aug 1 17:49:09 localhost kernel[0]: UniNEnet: Ethernet address 00:14:51:26:1d:cc
Aug 1 17:49:09 localhost diskarbitrationd[40]: disk0s3 hfs D5C0BAB6-ADB2-3A2A-9DDD-6F971A163F6B HiMac /
Aug 1 17:49:09 localhost kernel[0]: AirPortPCI_MM: Ethernet address 00:14:51:7e:85:c0
Aug 1 17:49:09 localhost launchd: Server 3507 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[43]: exited abnormally: Hangup
Aug 1 17:49:10 localhost usbmuxd[36]: usbmuxd-196 built for iTunesNineTwo on May 17 2010 at 13:53:51, running 32 bit
Aug 1 17:49:10 localhost lookupd[63]: lookupd (version 369.8) starting - Sun Aug 1 17:49:10 2010
Aug 1 17:49:10 localhost configd[38]: WirelessConfigure: 88001003
Aug 1 17:49:10 localhost configd[38]: initCardWithStoredPrefs failed.
Aug 1 17:49:10 localhost configd[38]: WirelessConfigure: 88001003
Aug 1 17:49:11 localhost kernel[0]: Registering For 802.11 Events
Aug 1 17:49:11 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
Aug 1 17:49:12 localhost mDNSResponder: Adding browse domain local.
Aug 1 17:49:13 localhost kernel[0]: ATY,Aphrodite2_A: vram [98000000:08000000]
Aug 1 17:49:13 localhost kernel[0]: ATY,Aphrodite2_B: vram [98000000:08000000]
Aug 1 17:49:13 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Aug 1 17:49:14 localhost loginwindow[67]: Login Window Started Security Agent
Aug 1 17:49:18 gerda-kilgores-imac-g5 configd[38]: setting hostname to "gerda-kilgores-imac-g5.local"
Aug 1 17:49:20 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link Active: "U2M67" - 001801fb71c5 - chan 11
Aug 1 17:49:20 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup
Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
Aug 1 17:49:23 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[63]: exited abnormally: Hangup
Aug 1 17:49:23 gerda-kilgores-imac-g5 lookupd[119]: lookupd (version 369.8) starting - Sun Aug 1 17:49:23 2010
Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: setting hostname to "new-host.home"
Aug 1 17:49:26 gerda-kilgores-imac-g5 configd[38]: target=enable-network: disabled
Aug 1 17:49:27 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup complete
Aug 1 17:49:29 gerda-kilgores-imac-g5 mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.1.
Aug 1 18:18:49 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b609000]::init(0x3587f00)
Aug 1 18:18:49 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b609000]::free()
Aug 1 18:28:19 gerda-kilgores-imac-g5 kernel[0]: IOSMUPwrController:: OverTemp notification
Aug 1 18:28:19 gerda-kilgores-imac-g5 kernel[0]: Power Management received emergency overtemp signal. Going to sleep.
Aug 1 18:28:21 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link DOWN (Client disAssoc 0)
Aug 1 18:28:21 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[119]: exited abnormally: Hangup
Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: setting hostname to "gerda-kilgores-imac-g5.local"
Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: AppleTalk shutdown
Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: AppleTalk shutdown complete
Aug 1 18:28:21 gerda-kilgores-imac-g5 /usr/sbin/AppleFileServer: AFPServer::AbnormalATListenerShutDown - clear listener
Aug 1 18:28:21 gerda-kilgores-imac-g5 lookupd[240]: lookupd (version 369.8) starting - Sun Aug 1 18:28:21 2010
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: System Sleep
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: System Wake
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: Wake event 0020
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: USB caused wake event (EHCI)
Aug 1 18:28:26 gerda-kilgores-imac-g5 kernel[0]: FireWire (OHCI) Apple ID 52 built-in: handleSelfIDInt - received quads == 0. issuing bus reset
Aug 1 18:28:32 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link Active: "U2M67" - 001801fb71c5 - chan 11
Aug 1 18:28:32 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup
Aug 1 18:28:35 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[240]: exited abnormally: Hangup
Aug 1 18:28:35 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
Aug 1 18:28:35 gerda-kilgores-imac-g5 lookupd[249]: lookupd (version 369.8) starting - Sun Aug 1 18:28:35 2010
Aug 1 18:28:36 gerda-kilgores-imac-g5 configd[38]: setting hostname to "new-host.home"
Aug 1 18:28:37 gerda-kilgores-imac-g5 mDNSResponder: Repeated transitions for interface en1 (192.168.1.2); delaying packets by 5 seconds
Aug 1 18:28:38 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup complete
Aug 1 18:28:41 gerda-kilgores-imac-g5 mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.1.

Usb problems with flash drive, camera and ipod

It seems to be that when i restart my computer i can plug something into a usb right away but if it's on for a little then it doesn't recognize it...anyone know why. its driving me nuts. thanks!

Triple-click anywhere in the line below on this page to select it:
{ ls -@ORen /S*/*/E*/IOSto*; codesign -vv $_ 2>&1; } | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

Issues with Flash Pro CS5 on Mac

Hi,
I recently bought a MacBookPro 15", 2.4 GHz Intel Core i5, 4GB 1067 MHz DDR3 and CS5 Creative Suite. Built in Intel HD Graphics and NVIDIA GeForce GT 330M.
Hi have some issues with Flash Pro:
- when objects on the stage are quite big (for example a 800x3000 movie clip), it start showing strange colors and wrong position, however when double clicking the movie clip to edit it, it looks correct. Also no problem when publishing. See images attached, the first one is correct, the second one shows the problem, when editing the mc in the 2nd image i get the third image that is correct.
Correct:
Wrong:
After entering editing mode:
- after a while, when making a change in the stage or in the time line (deleting frames for example), it doesn't show it immediately, but i need to refresh the page. This happens more when opening many fla in the same time. Closing and restarting Flash fixes it, for a while.
- after a while it doesn't show when selecting an object, the object looks like is not selected, however i can see that it is in the properties panel. This happens more when opening many fla in the same time. Closing and restarting Flash fixes it, for a while.
Hi have been using CS3 and CS4 with less powerful computers before (always mac) and i never encountered these issues.
Removing preferences and Application support files didn't help. I also updated Flash to v. 11.0.1, but no joy.
Does anyone know what's the problem?
Thanks a lot.
Mike

Based on some searching and testing, it seems that if you redirect ~/Library/Application Support/Adobe/Flash CS5 to a location on the local hard drive, rather than the network account storage, the problem ceases.
I hope this helps anyone else who may run into this problem.
Take care,
Branden

X1C: Imaging a brand new X1C -- how best to? via Acronis? USB 3.0 or USB 2.0 flash drive?

For a brand new X1C, may i ask what some pointers are might be relevant to imaging?
apparently, USB 3.0 flash drives will not work due both to Windows 7 as well as Acronis not recognizing USB 3.0 for a boot up drive (as USB 3.0 post dates Windows 7 and Acronis).
have y'all been successful with a 32gb USB 2.0 flash drive? any particular brand?
also: how much of your 32gb flash drive was consumed with a brand new image of the X1C please?
Thanks very much in advance.

Hi dualmonitors,
It's a good question, but I removed the duplicate posts. Please don't post the same question in multiple places, and don't hijack others' threads.
Thanks!
I don't work for Lenovo. I'm a crazy volunteer!

After the recent update I am having issues with Flash based games freezing and not responding.

After the recent update I am having issues with flash based programs not running or loading correctly. The programs will not load or take an extremely long time to load compared to jsut a few days ago. This happens across the board on anything flash based. Also, once they do load they will freeze, stop responding or need to be constantly refreshed to come back alive which is short lived at best. I went thru the help and did all the file deleting, cache clearing, disabling hardware acceleration, removing then reinstalling flash, and even removing and reinstalling my browsers. None of this has helped at all. I am using Chrome and it is up to date and I checked my Flash player and it is up to date. I am running windows 7 64bit.

Here's what you're up against guys,
Adobe writes the base code for Flash Player, and then hands it off to Google, who adapt it to a PPAPI plug-in (it's NPAPI when Adobe writes it). It's then "PepperFlash" and Google embeds it in their Chrome browser. While Google is pushing a "webwide" move to PPAPI Flash Content, a reinvention of the wheel so to speak, not everyone "got the memo", and Google is slowly making it so that PepperFlash will block NPAPI Flash content from running properly, and you have to disable PepperFlash to force the NPAPI plug-in to work, which sometimes fixes it, sometimes not. I have a feeling this is only going to get worse. HTML5 will eventually resolve the video end but game developers need to come up with something that won't require a plug-in.
And to the first post: Since PepperFlash is embedded in Chrome by Google, you can uninstall and reinstall Flash Player from here until your hard drive literally seizes up.... guess what? It has NO EFFECT at all on the PepperFlash plug-in in Chrome because it's a separate file in a separate folder and the uninstaller & installers don't have anything to do with it.

Booting from a USB 2.0 flash drive

After reading an article on website MAC OS X Hints on booting from a USB 2.0 flash drive I decided to try it. I used DasBoot to create an OSX system. I then booted in Open Firmware and typed 'devalias' as the instuction said to do but I never got the 'ud' listing that I was supposed to see so I was never able to boot off the drive. I followed all the instuctions then typed mac-boot. When the system restarted it momentarily flashed the folder with the ? on it then proceeded to boot off the internal HD. Anyone else tried to boot off a USB 2.0 drive with an iMac G5 Rev A running 10.4.10 and was successful?

Since you didn't post a reference to the OS X Hints article it's hard to tell what you may have done wrong. When you post a problem you need to provide complete information.
That said you shouldn't have to do anything special except to be sure you properly partition and format the flash device:
Extended Hard Drive Preparation
1. Open Disk Utility.
2. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Click on the Options button and be sure to select the APM partition scheme then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition only.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume mounts on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
After formatting has completed you can install OS X and then upgrade it to 10.4.10. That should be all you need do. Now open the Startup Disk preference pane, select the icon of the flash drive, then click on the Restart button.

Product availability - Patriot SS USB 3.0 Flash Drive?

I am interested in purchasing the Patriot Supersonic 64GB USB 3.0 Flash Drive. It is currently sold out online and BestBuy does not sell them in stores. Here is the product page. Do you know if/when the item will be available online? Or if you can find out if the item is sold out due to the 2012 holiday season, or if Best Buy has no plans on selling the item again? I'd rather not wait around forever if I don't have to. Thanks.
Patriot Memory - Supersonic 64GB USB 3.0 Flash Drive
Model: PEF64GSUSB | SKU: 2731844
This USB 3.0 flash drive features quad-channel technology for read speeds up to 100MB/sec. and features 64GB of storage for storing large media files. The aluminum housing ensures durability.
Read reviews (0)
Sale: $72.98
Solved!
Go to Solution.

I go to my local Best Buy store now and then and find that they have an item out of stock. Now they are able to tell me if they are getting anymore in by searching in their computer and seeing what their shipment totals are going to be. If it says 0 are coming in and its that way for a long time, its very well thought to be the product is not going to be carried by Best Buy anymore.
I noticed that Best Buy often has good buy deals where they only get X amount of quantitiy of an item and when its sold out they are not getting anymore back in.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Having Major Issues with Flash Player

Using IE 8, 64 bit, flash player 11.4.402.287
Having major issue with flash player! can not play a lot of games on FB. Games tell me that i need to update my Flash Player, PC says I have the latest version installed already.Ok, thought i would uninstall/reinstall...no go. Will not uninstall, says I need to close IE...which none are open. This issue has been going on for weeks now. I have done everything the help said to do and still not working. I need HELP!

im using the recent adobe flash player
windows XP, internet explorer, 10.045.2, 32bit
im not sure how this works, but im sure all that is correct:)
if you need additional infomation, just let me know

Issues with Flash player in CC

Hi,
I am facing this issue with Flash in CC. We have recently upgraded our Adobe suite from CS6 Master Collection to Adobe Creative Cloud ENT.
The video playback in the software(Flash in CC) is incredibly slow and choppy, which makes it difficult for students to work on their animation.
This is happening with all PCs using Flash CC, there are few students who have Flash CS6 on their PCs and they aren’t having this problem.
Thanks,
Ram

Hi Mohan,
Thanx for the response. below are my specs:
Specs:
Windows 7 Pro, Service pack 1, build 7601
Intel Core i5 760 2.8Ghz
5 GB RAM
Nivdia Gefore GT 220
Just tried your recommendations.
The performance issue exists for both the stage/timeline playback as well as test movie. I tried the suggestion to close the timeline and it doesn’t seem to make any difference.
When playing back footage, the FPS display on the timeline can be seen to fluctuate.
I’ve also tried another thing: Closing Flash CC and opening the test movie SWF file, which opens in Flash Player 11 and it plays perfectly fine.
Tanx.. Ram

Having issues with hard drive, trying to start up football manager 2015 but it reads for a few seconds then ejects itself , ive tried other cds and it reads fine so tried older versions of football manager which ive used before and they dont either

im having issues with hard drive im trying to install football manager 2015 it reads disk for a few seconds then ejects itself other cds read fine
and have tried older versions of football manager and they dont read either
any help would be greatly appreciated
thanks

Try resetting the SMC 2-3 times, if that does not work then the DVD may need cleaning. Get a dry cleaning kit from your local office supply store.
Intel iMac SMC and PRAM resets

Interface freeze issue with Flash Projector

I am facing an interface freeze issue with Flash Projector running a flex state based application. A Flash Projector exe was generated from a standalone flash player ver 10.2. The target machine on which the problem occuresd has 10.3.
Basically "screen freeze" means that the user interface is running as usual on Flash Player, but it's not responding to any user input (like button presses). But if we alt-tab to another application, the state changes in the Flash player. There is display with buttons on the screen, but touching the buttons or doing anything else - it did not respond. Rebooting the computer fixes the problem.
Can you suggest why this is happening? Is there any known bug in Flash Player.
The problem is this is being hard to reproduce on the developer workstation as it doesn't happen always. But it happens quite often on the target machine running an Intel Atom N270. What debugging steps can you suggest?
Problem Description : http://www.youtube.com/watch?v=z25oV9QWRyk

First, thanks for the video. Having this always makes it much easier to understand the problem. A couple of recommendations. First, if you feel like this might be a player bug, please add a new bug report over at bugbase.adobe.com and if possible please include any sample code or swf's that can help us reproduce the problem internally. Linking the video would also be great. In addition, would you mind reposting this question over on the Flash Professional forums? This forum is primarily for end users, the Pro forums will get you in touch with a wider developer audience who might have additional feedback.
Thanks,
Chris

Install issue with CD drives / and burning

I am running Windows Vista 64 on a new computer I built (latest ASUS P5K-E with a quad Q6600 cpu and 4gigs of RAM). I transferred all my music and installed iTunes. Everything is working fine except for the burning of disks. It did give me a prompt at the end of the iTunes install and on first startup that there may be a problem recognizing the CD drives. However, there is no problem importing music on those CD/DVD burner drives -- but I cannot burn on those drivers. I can burn using other software on these drives -- no issues with the drives at all. Under iTunes "Preferences", and 'Burning' it states "No supported Disk burners found". Both are Lite-on CD/DVD burner drives and less than a year old -- and of course worked on the old XP computer with iTunes. I have uninstalled, reinstalled iTunes -- no luck. Any ideas? This looks to be something in the Registry on install, but not sure what to do. Any help appreciated.

You may need the CD Configuration folder too, after you install the drivers.
Here is the CD Configuration folder, with the Files you need Just Unzip it and place the CD Configuration Folder into Your C:\Program Files (x86)\iTunes Directory
http://stahlhammer89.com/apple/CD_Configuration.zip
I had my friend with Windows Vista x86 Install iTunes and give me the Folder and Files I needed.
Hope this helps you

Sollution to Firefox 3.6.8 issues with Flash 10.1.53.64 !!

Sollution to Firefox 3.6.8 issues with Flash 10.1.53.64 !!
Had the well known problem after upgrading to 3.6.8.
Found that many people had the same problem also.
After investigating A LOT about this one i've found that if you set, in about:config, the parameter " dom.ipc.plugins.enabled.npswf32.dll " to FALSE it solves the problem !!
So...
dom.ipc.plugins.enabled.npswf32.dll == false

While I have not contacted Adobe, I am sure the answer will be don't use Firefox 3.6.8. ( The compliment to the answer you gave. It not Firefox that has the problem but Adobe.)
Since the only solution that I have seen is to disable the key reason to use Firefox 3.6.8 (crash protection) then the problem would appear to be in how Firefox as done the crash protection.

USB Issue with Flash Drives

Similar Messages

Maybe you are looking for