USB KEY - IMAC TO WINDOWS

Hi!
I search to understand why each time a connect a usb key in the iMac to put some mp3 and after that, connect the same
usb key to windows 7 on my laptop and each time, it's said that the usb key have security and i can readonly the usb key...
not able to format, or write or copy files on the usb key...
someone know the reason?
Thanks!!
Martin

Allo it's okay!

Similar Messages

MacBook (not unibody) will not boot from Boot Camp USB Key

Hello
I have a MacBook Pro 2007 (17", 2.4GHz, 4GB RAM and SSD) with a defect SuperDrive, and I want to install Windows using an USB key instead. But the computer will not boot from the USB Key, even though the USB key works on my MacBook Retina. Also I was able to install Mountain Lion using USB Key, on the MBP 2007.
Here is a bit more details:
I've installed Mountaion Lion from the same USB Key (so boot from USB works).
I've installed a Windows 7 Boot Camp using the SuperDrive before (when it was not defected)
I've partitioned the harddisk using the Boot Camp assistant (this requires a Windows DVD in the SuperDriver... however it worked just enught to be able to have OS X recognize the Windows DVD, and create the Boot Camp partition). So far so good. Installing from the SuperDriver howerver does not work.
I've created an Windows USB Key using my MacBook retina. Because the Retina does not have a DVD, the Boot Camp assistant offers the creation of a bootable Windows USB Key from an Windows ISO file. I've used this USB key to install Windows on my MacBook retina.
When I try to boot my MacBook 2007 with this Boot Camp USB Key, it shows an "EFI Boot" option (with a orange USB logo) in the MacBook boot menu. When I select this nothing happpens. The mouse freezes, and the computer never boots.
Questions:
Shouldn't I be able to boot from an EFI USB Key on this MacBook 2007, when I'm able to install Mountain Lion using a USB Key?
When I installed BootCamp using the SuperDrive, I had to do som "magic" to make it bootable. Like this: http://www.logicalvue.com/2009/10/installing-window-7-x64-on-a-macbook-pro-using -bootcamp. I tried doing the "oscdimg -n -m -bc:\efi-dvd\boot\etfsboot.com c:\efi-dvd c:\efi-iso\win7x64.iso" trick and create a EFI bootable ISO and created the from this USB key using http://unetbootin.sourceforge.net/. Same result... the USB key shows up in the boot menu, but nothing happens when I select it (except the mouse freezes).
Any suggestions? Right now it feels like I have a bricked computer, because my kids needs Windows to run their games.
: Thomas

Thanks... I just tried rEFIt... and it almost worked.
After installing rEFIt I got several different boot options:
Bootmgr.EFI - This failed quick with a "unsupported" message
Bootx64.EFI - This actually started the Windows installation with "Loading files.............". But after a few minutes when all files was loaded, the screen went black. I tried ataching an external screen, but the screen was still black.
Boot from "Bootcamp" drive... as this drive is empty nothing happend.
Boot from "USB Key"... I'm not sure how this is different from the first 2 options... but nothing happend. I belive this is what happens if I try selecting the USB key from the build in boot manager.
Ofcause, whan I saw the "Loading files......" I thought I solved the problem, but as you can tell, I'm still stucked.
Actually... I tried with both Windows 7 64 bit, Windows 8 64 bit and Windows 8 32 bit. Only Windows 8 64 bit, got me to the "Loading files.....". This was created with the Retina Boot Camp assistant.
I also tried my own home made Windows 7 and Windows 8 ISO (created with this link: http://www.logicalvue.com/2009/10/installing-window-7-x64-on-a-macbook-pro-using -bootcamp).
I guess my problem is another now. I'll continue my hunt... but I don't have more time right now. So I've installed Parallels and Windows 8 for my kids. Not optimal, but at least the can play their games.

Boot from USB Key (for Windows installation)

This is my weirdest issue ever:
I have a windows 8 installation key which i want to use with bootcamp. Everything worked flawlessly on my MacBook Air (late 2011).
What I did on MacBook Air:
Created MS-FAT Partition with Disk Utility
Plugged in Win8 USB Key
Restarted
Held alt (or option) key and booted from the USB Key
Installed without error
However, this procedure DOES NOT WORK on my MacBook Pro (2008) or my iMac (mid 2011)!!! They do NOT show the USB Key when I hold alt (or option) during startup.
Is Apple somehow not allowing this due to the presence of a CD-Drive on the Pro and iMac?
The Key still shows up on the MacBook Air and is bootable even after installation of win8. So the problem is not the USB Key.
Thanks for any help!
Jordan

Being recognized and allowing Windows to be installed from a USB key are to totally different things.
But I have not yet worked with the 2012 Standard model MBPs so maybe Apple changed something on them that does allow Windows to be installed from a USB drive. But for all other models that have a built in DVD drive you can't do it from USB.

How can I configure a VM to boot from USB key in Virtual PC of Windows 7?

Hi all,
I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
Thanks for any help.
Scorprio
TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin

Hi all,
I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
Thanks for any help.
Scorprio
TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin
Virtual PC does not support USB. Windows 7 XP Mode Virtual Machine supports the use of USB devices. Virtual PC and Windows 7 XP Mode VM are not the same thing!

Solution to install Windows 7 on Macbook Air MID-2013 after 3 weeks of test, make with ISO image a usb key 2.0, It works!

Solution to install Windows 7 on Macbook Air MID-2013 after 3 weeks of test, make with ISO image a usb key 2.0, It works!

1. Select Partition4: Bootcamp. You should see advanced Options.
2. Click Format and convert the partition to NTFS.
3. Click Next.
Reference - http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
See Page 6.

Installing Windows 7 on MBP from USB key?

Hello all,
I've searched all around the internet, but I just can't seem to find a straight answer to this question:
Is it possible to install Windows 7 on an MBP with a USB key? Before you answer, read my process to see where I'm having trouble.
I want to install the Windows 7 beta on my MBP, but DVD media isn't available to me. I do, however, have a 4gb USB key. I've formatted the key with my XP install (through Parallels) to be bootable, and loaded the Windows 7 install on it. When I tried to use Boot Camp, the assistant asked me for a CD/DVD, so I figured that option is out.
My next attempt was to install rEFIx, which did show the USB key as a viable boot option, and even let me select the efi file to boot the Windows 7 installer. However, when I try to load it, I get a complaint:
Starting legacy loader
Using load options 'USB'
Error: Not Found returned from legacy loader
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple's firmware for legacy OS booting.
So now I am stuck. Can anyone offer me any advice regarding this matter? Any help at all would be greatly appreciated.

Windows normally cannot be installed nor boot from a USB or any external drive. This is a Windows problem. There are methods for installing and booting Windows from USB devices, but you will need to do some searching to find sites that detail the process. It's not likely you'll find much on Windows 7 because it's beta software, and not supported for installation on a Mac.

Satellite A500-14K - USB key not recognized with Windows 7

I have a Toshiba Satellite A500 14K, it was pre-installed for Windows 7.
I have purchased the Windows 7 upgrade: I received one disk for PC upgrade et one disk for windows upgrade. I have launched the first disk, and then the second one.
There was no special error message during these installations.
Since this upgrade, my PC doesn't recognized the USB keys whereas they work perfectly with the previous windows version with this pc .They are normally plug and play usb keys. When I launched the windows update, a driver is found, but the installation failed in error with a message of access problem.
I have check that the firewall doesn't block the access. I have installed the last version of the BIOS
I don't found any similar pb on the forum
thank you for your help

Not BIOS update but chipset utility.
Problem is that this notebook model is not supported for Windows 7 32bit but for 64bit only.
The same chipset is used on Satellite L500 and it is supported for Windows 7 32 bit so you can try to install THIS chipset utility.
Bye

Bootcamp assistant isn't working for me. How can I get windows on my macbook pro by using a usb key?

Bootcamp won't allow me to partiton the drive. and won't find the key i have windows on.

What happens when you try to use Boot Camp Assistant?
You should visit the Boot Camp forum https://discussions.apple.com/community/windows_software/boot_camp.

Moving voice memos from iphone 5 -- itunes--- HDD/USB key?

Hello Everyone,
So I have a question about syncing my IPhone with my iTunes and voice memos. So here it goes:
Question 1. I wanted to sync my memos to my iTunes library. Ever since I got my IPhone 5 in Sept, my phone would not sync the new voice memos to the iTunes library. So I followed the steps of syncing the memos to the library - I went to iTunes, under music I selected sync music. A message appeared and said that my phone "was synced with another computer, and can only be synced to one computer at a time, so I chose to go forward and it prompted me with a message saying all my music, videos and tones would be deleted (did not say anything about deleting voice memos) so i said screw it and went forward.
It synced my new voice memos that were made since I got the new iPhone (updated my computer to windows 8 so my OS changed also) and now I can see my new voice memos that were made, but all the old ones are no longer in iTunes (but they are still on the phone)
So, how do I add the older voice memos to my iTunes library, when now it will only add the newer once that were made since I got the new phone?
Note* I did make a full backup of my phone right before re-syncing my phone with itues music library)
Question 2
Ok, so now I have 4 new voice memos that were made since i got my new iphone, and they are in itunes (but all my old ones are no longer in iTunes, yet they are still on the phone). How Exactly do I transfer the voice memos from iTunes --> to a USB key and or my computer hdd (as a stand along file that i can open and close without iTunes).
I need to figure this out because I am doing my masters thesis and just did my first interview today, and I need to get the file onto my computer so that I can use an alternate player to listen and transcribe what was said in the interview.
Thanks,
A

http://support.apple.com/kb/TS4062
This didn't help, and AppleMobileDeviceHelper is not running.

One USB port does not work with external Disk or USB key

Hello,
Back to my iMAC there is 3 USB port. The second one - in the middle - does not work pluging an external Disk, an USB key or an iPOD nano. However it works well connecting a Wacom tablet.
Is there an explanation to this behaviour ?
More the keyboard is plugded on USB port 1 and the mouse on the keyboard. Time to time - especially at reboot - I have to unplugged the mouse and plugged again it in order it works.
In advance thank you for your answers
Regards

Since it does not work for three different devices, I will assume it is not something simple like a faulty USB cable. Since it does work for one device, I will also assume that the port is (at least partially) working.
As a test to narrow down the cause, I would try restarting from your Mac OS X installation disc (insert disc and restart with the C key held down).
At the first Installer screen (after language selection), go up the menu bar. Under Utilities, select to run Disk Utility. Now, connect the USB drive into that center port. Does it appear in the Disk Utility sidebar?
Please post back the result...

How can i save every bookmark on a usb key individually,so when i connect it i click the link,and voila

so...what i want to do,is,save all my bookmark or link,on a usb key,cause i have too much,but i need it to be all individual...not like the json export format,because like that,it's kind of like 1 file zipped all the link together...i need to be able to when a connect my usb key,i click the link and it load in firefox...as exemple...in my bookmarks folder...i have about an hundred and more files,and in each of them a hundred or so of links...so is there a way to do that,maybe with another program...i want to erase the one i have in my firefox to put them all on the usb key...thx in advance,waiting for your answers...and i have window 7

hi...and thx for yours time and answers...i tried what you guys said,and it does not work for me....it work but not all of them...saying some error happens....i really have to much...i tried to do folder by folder,but that does not work either,,,it zipped the total of the link instead of the folder selected....i saw that i can transfer them one by one into a new folder on my disk...but one by one gonna be a hella long thing to do....but work...i tried the keyboard shortcuts...i can select all of them but not copy them into the new folder on my disk....any idea following that....i really just want to put them all on my usb key...and not use the firefox application to store then on firefox web...thx in advance

IPhone is not appearing in iTunes 12, USB not recognized by Windows 8.1

S.O.S
My iPhone 5s is not appearing in iTunes 12.
Windows 8.1 says "USB Not Recognized".
iPhone not appearing in iTunes 12 on iMac and MacBook Pro as well
iPhone can charge with no problem.
Try different cables and same problem nothing changed.
I had tried;
Reset and Restart iPhone.
Cleaned the charging input.
Tried in 3 different computers.
I can't perform the method like uninstall/reinstall the USB driver on my Windows because in my Windows the USB showed unrecognized instead of "Apple USB/iPhone USB" on Device Manager.
P L E A S E A D V I S E

Hi Since ios 7 almost everything can be dropped over your WiFi When you charge your phone if Automatically backs up to iCloud If you have problems backup to iCloud over your WiFi Then Restore iPhone back to Factory Settings Use same Apple ID Then you will get all your apps & data back. We have 2 iPhones & 3ipads & have not used a pc for over a year with them. Cheers Brian

[SOLVED] Attempting to boot from USB key in UEFI mode

I am attempting to boot from a USB Key in UEFI mode to dual boot windows 8 and arch linux. I'm unsuccessful in getting the USB key to boot in UEFI mode.
I am following the guide on page: https://wiki.archlinux.org/index.php/Un … _Interface due to the fact that I am receiving error " No loader found. Configuration files in /loader/entries/*.conf are needed."
I am attempting to use the archiso media and have created refind.conf according to https://bugs.archlinux.org/task/31894#comment102233 in (USB)/EFI/boot/refind.conf
However, I'm stuck on the initial step from the wiki: Install refind-efi pkg. In the usb's filesystem, overwrite the file EFI/boot/bootx64.efi with /usr/lib/refind/refind_x64.efi.
My question is: How do I install the refind-efi package onto the USB key using an arch linux host machine and the USB plugged into the machine.
Last edited by tonysoprano (2013-02-13 04:09:56)

swordfish wrote:1. Might be possible, that the uefi integration is pretty bad. Have you already looked for an update of the uefi bios?
This is my thought, too. The "memory map has changed" message sounds like the firmware is messing with the way memory is laid out in the middle of the boot process. A firmware update, if available, is likely to be the best way to deal with this problem. If not, trying Fedora's patched GRUB Legacy and GRUB 2 are also worth doing; it's conceivable that one of them includes a workaround for the problem.
2. In your first posting you mention Windows 8 on this machine. Is W8 starting in uefi mode?
This is important, but if the disk uses GPT partitioning, then Windows is starting in EFI mode.
3. If W8 is starting in uefi mode, are you sure that secure boot is disabled?
It is; if it weren't, neither rEFInd nor ELILO could start -- or even if they were configured to start in Secure Boot mode, ELILO doesn't launch its kernels in a way that respects Secure Boot, so the ELILO failure can't be caused by Secure Boot. Also, when launched with Secure Boot active, rEFInd returns a clear error message about a security violation and then returns to its main menu; it doesn't hang the computer.
One possible workaround occurs to me if all else fails: Have rEFInd launch a BIOS version of GRUB. The setup procedure, in outline, is as follows:
Create a BIOS Boot Partition on the disk.
Install the BIOS version of GRUB 2.
Configure rEFInd to include a scan for BIOS-mode boot loaders by uncommenting the "scanfor" line in refind.conf and adding "hdbios" to it.
Thereafter, you'll see a new "generic" icon, which should launch GRUB, which should launch Linux in BIOS mode, even though Windows launches in EFI mode. This will work on most modern UEFI-based computers with a single hard disk, but things get trickier with multiple disks and with some UEFI implementations that lack the necessary firmware features. If a future firmware update fixes the problem, or if a future kernel's EFI stub loader includes a workaround, the EFI-mode booting will become an option once again.

USB keys and external hard drives disappear after 30 seconds to 1 minute of being mounted.

I just got my 15' MacBook Pro refurbished (by Apple), and everything is working well except my USB ports. My USB keys appear for 30 seconds to as much as 2 minutes before disappearing from eveywhere, my desktop, finder and disk utility. I have a 1 TB WD passport for mac that also has the same problem, but can stay on the desktop and copy files for around 10 minutes. Then error -36 shows up, the hard drive disappears from the desktop and finder, but only appears in disk utility. It is powered as well, The light is currently flashing indicating it's receiving power as I am typing this. But still, no way i can copy anyhting onto it.
I have searched and searched for the solution to this problem, I have tried using apple script to find "invisible hard drives." and that doesn't work either.
On my windows partition in bootcamp, all usb keys work perfectly fine.
Is it because the USB ports are out of energy and dying? If so, should the refurbishment have covered that and replaced them? (Note: refurbishment included everything from my Keysboard to my battery to my Optical drive and cable optical drive flex)
Is there anything I can do to fix this problem on my own?
Any help I can get would be greatly appreciated.

Hi wdmpfm,
Here is something from an earlier post on the -36 error that may help to identify the issue:
A -36 is a disc I/O error. You might have a corrupt file, or a corrupted drive. Try creating a new file and see if you still get the error. If you do, it might be wise to run a Disc Repair program to see if it can find any errors that it can fix.
And one from another thread:
You need to format your drive correctly. New drives come formatted for Windows, & then they seem to work — but not properly.
+Applications > Utilities > Disk Utility+
Choose one of the +Mac OS Extended+ formats.
Obviously first you will have to back-up all the data you have already put on the drive, because it will all be lost when you re-format.
Hope one of these may help!
Cheers,
GB

9926 do not read AutoUnattend.xml on USB key

From Vista to Windows 10 9879 I used AutoUnattend.xml on USB key to deploy.
9926 do not read my AutoUnattend.xml who worked great with the previous versions.
I try to modify my AutoUnattend.xml but Windows System Image manager do not want to generate the catalog and give me the message: Windows SIM was unable to generate a catalog. For troubleshooting assistance, see the topic: 'Windows System Image Manager Technical
Reference' in Windows ADK User's Guide.
Clic here to open the log file:
16:26 : This application requires version 6.3.9600.16384 of the Windows ADK.
Install this version to correct the problem
16:29 :
16:29 : Windows SIM was unable to generate a catalog. For troubleshooting assistance, see the topic: 'Windows System Image Manager Technical Reference' in the Windows ADK User's Guide.
16:29 :
16:29 : System.ComponentModel.Win32Exception (0x80004005): Unknown error (0xc1420117)
Server stack trace:
at Microsoft.ComponentStudio.ComponentPlatformInterface.WimImageInfo.PostCreateCatalog()
at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageInfo.CreateCatalog()
at Microsoft.ComponentStudio.ComponentPlatformInterface.CatalogCreatorImpl.CreateCatalog(OfflineImageInfo offlineImageInfo)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.ComponentStudio.ComponentPlatformInterface.ICatalogCreator.CreateCatalog(OfflineImageInfo offlineImageInfo)
at Microsoft.ComponentStudio.CatalogGenerator.CreateCat(ProgressDialog pd, Object o)
I do not know what to try to make a unattended install of 9926.
Thank you for your help.

Hi,
Generally speaking, WinPE would generate a setupact.log which contains if the setup process look up AutoUnattend.xml file when installing system.
Please check it.
Roger Lu
TechNet Community Support

USB KEY - IMAC TO WINDOWS

Similar Messages

Maybe you are looking for