Usb key problem help

I get a new problem with my usb key, since 2 month i didn't use it, today i plug in and no appearance on the deck,. I check system profiler and the key was detected but no presence on the deck.
I bought a new one 1 GB (dane-elec) and same problem as the old one.
What could be the problem? and what shall i do?

Perform SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer. 
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

Similar Messages

  • Yet another usb key problem [solved]

    i recently purchased 2 apacer 2GB usb flash drives so i could transfer my files between computers with ease and speed. i have the computer, using udev rules, recognizing the drives as i put them in, and automounting them to a /mnt directory.
    couple questions about it though
    1. the drives are read only, and cannot be changed from (using chmod or chown) root
    drwxr-xr-x 4 root root 16384 Nov 14 11:18 usb1
    how can i fix this?
    [root@creech ~]# ls -l /mnt
    drwxr-xr-x 4 root root 16384 Nov 14 11:18 usb1
    [root@creech ~]# chown spookshow /mnt/usb1
    chown: changing ownership of `/mnt/usb1': Operation not permitted
    [root@creech ~]# chmod 777 /mnt/usb1
    [root@creech ~]# ls -l /mnt
    drwxr-xr-x 4 root root 16384 Nov 14 11:18 usb1
    [root@creech ~]#
    is this possibly because it is fat16? and if so, what format should i use to make it readable across windows and linux machines?
    fdisk -l
    xxxx
    Disk /dev/sdi: 2063 MB, 2063597568 bytes
    16 heads, 32 sectors/track, 7872 cylinders
    Units = cylinders of 512 * 512 = 262144 bytes
    Device Boot Start End Blocks Id System
    /dev/sdi1 * 1 7872 2015216 e W95 FAT16 (LBA)
    2. i want to create links on the desktop automatically so that i could  easily access the drives when i plug them in, how can i do this?
    udev rules file i created below (and by created i mean stole from the wiki)
    KERNEL=="sd[h-z]", NAME="%k", SYMLINK+="usb%m", GROUP="users", OPTIONS="last_rule"
    ACTION=="add", KERNEL=="sd[h-z][0-9]", SYMLINK+="usb%n", GROUP="users", NAME="%k"
    ACTION=="add", KERNEL=="sd[h-z][0-9]", RUN+="/bin/mkdir -p /mnt/usb%n"
    ACTION=="add", KERNEL=="sd[h-z][0-9]", PROGRAM=="/lib/udev/vol_id -t %N", RESULT=="vfat", RUN+="/bin/mount -t vfat -o
    rw,noauto,sync,dirsync,noexec,nodev,noatime,dmask=000,fmask=111 /dev/%k /mnt/usb%n", OPTIONS="last_rule"
    ACTION=="add", KERNEL=="sd[h-z][0-9]", RUN+="/bin/mount -t auto -o rw,noauto,sync,dirsync,noexec,nodev,noatime /dev/%k /mnt/usb%n", OPTIONS="last_rule"
    ACTION=="remove", KERNEL=="sd[h-z][0-9]", RUN+="/bin/umount -l /mnt/usb%n"
    ACTION=="remove", KERNEL=="sd[h-z][0-9]", RUN+="/bin/rmdir /mnt/usb%n", OPTIONS="last_rule"
    thanks in advance
    solution = hal + dbus (actually running) + gnome-volume-manager + small script

    broch wrote:
    I have geil 2GB transfer rate 26MB/s
    assuming that you are running KDE or Gnome there is no need to modify /mnt or create any extra folders. KDE and Gnome will handle removable devices automatically
    conditions:
    1) running dbus/hal
    2) slight changes to /etc/fstab
    usbfs                  /proc/bus/usb usbfs     noauto              0      0
    proc                   /proc         proc      defaults            0      0
    sysfs                  /sys          sysfs     noauto              0      0
    upon inserting usb key system will  automatically mount it in
    /media/sdbX
    where X is connected device number (if you connect more than one at a time)
    in case that you close window, go to system -> storage media -> your_usb_stick
    3) user added to storage group
    if you are using xfce or less then get ivman it is easy to configure and works very well.
    hope this will help
    thanks, i will try it tonight, i had no power at my house last night due to a windstorm, hopefully this will work (i would ssh to my computer from here and set it up, but i guess i forgot to turn on ssh at home )

  • USB port problems: Help welcomed.

    When plugging any of my iPods into the computer via the USB port, I receive no reaction.
    A half-way full battery becomes frozen on the iPod and that is the absolute only reaction I get get.
    I've tried using different USB ports on this computer and have even switched the cables I was connecting with to no avail.
    My iPods can all be charged using the wall charger. It is almost as if the computer is not recognizing the cable.
    That said, I have had iPods for quite sometime (my first was a 20GB) and have never been faced with this problem before.
    All help is appreciated!

    There are various things you can try depending on whether you use a Mac or Windows.
    However, you've left out this info.

  • Left shift key problem help please

    My left shift key is shifting my open page up out of the way and bringing me to my desktop page. My right key works fine. Does anyone know how to fix this problem?

    Well, not sure about you new-fangled Snow Leopard users, but I'd check the Dashboard & Exposé preference pane in System Preferences and see if the Desktop shortcut is "Left Shift" instead of the normal F11.

  • Z77A-G43 USB Plug problems [HELP]

    Board: MSI Z77A-G43 LGA 1150
    Bios: Version 04.06.05
    VGA: GIGABYTE 660GTX
    PSU: Dazumba 230Vac 50Hz 6A
    Processor: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz (4 CPUs), ~3.0GHz
    MEM: 6144 MB RAM
    HDD : SATA 1TB
    OS: Windows 7 Ultimate 64bit
    Hello i got a problem where my usb plug always stopped working for no reason
    when i boot my PC , everything is fine and about 15-30 (sometimes more than 1 hour)
    everything is stopped (Mouse , Keyboard , USB Microphone) BUT the Monitor and the Speaker works fine and it is still working
    this is really annoying for me when i playing a game and my mouse got stuck and i have to restart my PC
    and also i have an electricity problem in my house the voltage is unstable so i have to use stabilizer
    is my motherboard affected by the electricity or what? idk i'm really really new at thing like this and do i need to change my PSU / Stabilizer
    Thank you

    Quote from: Sea Dog on 19-July-14, 03:49:49
    Could you provide more details about the PSU? Wattage rating and the amp rating on the +12V rail(s). Also, what is the current BIOS version? Why 6GB RAM? Are you using 3 sticks? If so, that is known to be counterproductive and has shown performance hits in that configuration in benchtests. Use just 2 RAM sticks in dual channel placed in the proper DIMM slots.
    PSU : 600W , +12v1 , 10.35A (Pic below if you want to see it clearly)
    BIOS : American Megatrends Inc. V2.12, 11/1/2013
    why 6GB? back then i could only buy 6gb because i don't have enough money lol
    and i really really need it because it was urgent and i dont use 3 sticks only 2 sticks

  • KEY PROBLEM HELP!!!!!!!!!!!

    PLEASE HELP ME!!
    every time i press either my "alt", "x", "v", "b", or "sym" key this comes up:
    b$
    how do i fix this pls help asap!! 

    Issues such as that are often a result of moisture or liquid damage.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Ipod mini USB power problem HELP!

    everytime I plug my ipod mini in to the usb port I get this message: This USB device can not opperate because it needs more power than is availible.
    I have tried plugging it into another USB port but I get the same message.
    Our Imac likes my mums ipod shuffle just not my mini. any suggestions?

    Maybe there's something wrong with your USB cable? Have you tried connecting your iPod with a different cable?

  • USB key help

    Hey, I just bought a new HP 4GB usb key because I lost my old one. Anyways, the problem is that my new usb key is not recognizing on my macbook. It works fine on my desktop windows computer though. Do I need to reformat my usb key on my macbook and if so how? I always need to send data between my macbook and my desktop computer for work and school. So if someone can help clear this up for me it would be greatly appreciated. Thanks.

    Hi There,
    I had the exact same problem, for me it was because Mac and PC Formats of hard drives they can read and write are different, usually new flash drives come formatted to NTFC, which is windows standard, Mac should be able to read this (so you should see it come up) but it will not be able to write to this. The other popular format is FAT 32, Mac should have no problem reading or writing to this.
    But best thing for now is to format the whole USB, Make sure theres nothing on it you dont want deleted.
    Go to your spotlight (CMD + Spacebar) type disk utility. Check if the drive shows up here, if so click on it and hit the erase tab. Try formatting there and let us know what happens.......
    Gareth

  • After upgrading to lion my internet usb key is not able to connect anymore.can anybody help me?

    after upgrading to lion my internet usb key is not able to connect anymore.can anybody help me?

    If there are no restrictions engaged and you are not receiving any Error messages or Alerts...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • After update iPhone4 to iOS6, its stuck, showing only USB to iTunes on the screen. What to do, how to solve problem, help

    after update iPhone4 to iOS6, its stuck, showing only USB to iTunes on the screen. What to do, how to solve problem, help 

    Connect your phone to iTunes on your computer like the diagram has indicated and restore the phone

  • Please help with USB Key

    Im running logic pro 7. My usb key broke (bent) during a move. Do you know of a simple and inexpensive way for me to replace it or repair it. Is that an option, or do I have to repurchase Logic Pro 7 (from a consumer of course, given the fact that Apple no longer sells that version).

    Contact Apple Service. If you are the registered owner, they will help you get a replacement. If you aren't the registered owner, it might be tougher, but they are not unreasonable.

  • Problem with USB key installation

    I use dd command to write the iso image to an USB key (8G). Then I use partition tool to increase the Linux partition to 7G from 34M.
    But during the installation of xfce4, the OS reports no enough space left. How to solve this issue?
    Also parman reports erros during the installation of archiso.
    Thanks,

    If you burn an iso to a usb with dd, that will not be a persistent system.  You cannot actually change the size of if nor install anything new (at least nothing that would survive a reboot).
    If you want to install a persistent system on a usb, there is a wiki page for that - and it is pretty simple.  I've done it many times.  But you need to follow the installation instructions, not the live-media creation instructions.
    You'll mount and partition the usb, use pacstrap, configure files, and install a bootloader on the usb.
    EDIT: if, however, you don't need a modifiable system, but rather you just want to create a customized live-usb, there are tools for this as well - I haven't used them and I get a couple names confused: archboot and archiso.  At least one of those would be the tool for this.
    Last edited by Trilby (2013-08-13 13:19:20)

  • Installing Arch Linux on USB key: error while booting

    Hello,
    first of all, I must say I've followed the steps from this article on arch wiki to install archlinux on my USB key: https://wiki.archlinux.org/index.php/In … _a_USB_key
    So what I did is to use one of my 2 usb keys to INSTALL linux, and the second one to RUN linux. I used dd to write on the 1st usb, eveything worked fine when booting, then I do install arch on the my second usb following the stept from the link above, everything works until I get this error while booting (at the middle):
    Waiting 10 seconds for device /dev/sdc/
    Root device '/dev/sdc' doesn't exist. Attempting to create it.
    ERROR: Unable to determine major/minor number of root device '/dev/disk/by-uuid/lotsofnumbers'
    You are being dropped to a recovery shell
    Type 'exit' to try and continue booting
    /bin/sh: Can't contact tty; job control turned off
    [ramfs /]#
    To summarize I'll show you my conf files that could help you to resolve my problem:
    /etc/fstab.conf
    /dev/sdc1 /boot ext2 defaults 0 1
    /dev/sdc2 / ext3 defaults 0 1
    /dev/sdc3 /home ext3 defaults 0 1
    So here I've sdc1 boot 32MB partition; sdc2 root 3GB partition; sdc3 home 978MB partition for a total of 4GB USB key~
    I didn't make a swap partition as in the tutorial they are writing it's unnecessary for some kind of reasons.
    /etc/mkinitcpio.conf
    HOOKS="base udev usb autodetect pata scsi sata filesystems"
    I've added to here, "usb" to the hooks
    installed GRUB on my sdc, here is the menu.ist:
    # (0) Arch Linux
    title Arch Linux (USB)
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/sdc ro vga=773
    initrd /kernel26.img
    So, I boot GRUB without problems, start Arch Linux, but then I got this error above.
    I've searched alot on some forums and read many stuffs, but sitll can't fix it and it seems complicated.
    I've tried to boot with UUID, also, but didn't make difference. I tried to remove some parameter from the hooks, but unfortunately this wasn't working still. I've read somewhere to use chroot, but I didn't catch on how to do that and what was the use of chroot, I'm still noob user of arch linux and currently learning. Maybe it's the problem, as some forum were talking about creating a new image, but I still don't know how to make it. By the way, I'm not sure this could have fixed my current problem. I've also read somewhere it could be due to my lack of space, but I wrote you how I did partition my USB key, let me know if you have any suggestion please.

    1. What I did is re-installing entirely from my installation disk or USB to test out different setting in  my config files, because I don't know how to edit my .conf as I can't really finish to boot to the end and get in terminal mode? If there is a quicker way to edit files from any terminal to go into my current USB sdc to modify directly my file from there, I'd enjoy probably. So rebuilding the initpio, no, I just re-installed to test out different configs.
    2. Yes, same error.
    3. Tested out by-id/by-path and uuid = no difference
    4. Didn't know about larch, it seems to be a nice tool, I'll check it out

  • [SOLVED] Many modules are not loaded in the Arch USB key installation.

    Hello!
    I installed Arch Linux on my USB key. I did it few months ago and it worked, I had portable arch.
    Yesterday I decided to make a fresh installation. Unfortunately after booting it from my USB key
    most of the modules were not loaded. Because of that I couldn't start the X server and connect to
    the internet (ethernet card was not detected).
    Even after loading the module which corresponds to my ethernet card manually (modprobe e1000e) it was not
    displayed in the lsmod list.
    I though "maybe I screwed something up during the installation?". To find out I used GParted to copy
    my OS partition (perfectly working Arch Linux installed on the hard drive) to the USB key. Of course I changed the UUID of the USB partition.
    After booting it I was suprised because the situation did not change - modules that are loaded on my main system for some
    reason were not loaded on it's exact copy placed on the USB key.
    I have no idea why my portable OS is acting like this.
    Commands below were executed on another PC so don't look for the e1000e module.
    $ lsmod
    Module Size Used by
    ext4 474699 2
    crc16 1367 1 ext4
    mbcache 6082 1 ext4
    jbd2 83440 1 ext4
    usb_storage 48007 2
    ata_generic 3378 0
    pata_acpi 3395 0
    hid_generic 1161 0
    usbhid 40577 0
    hid 90742 2 hid_generic,usbhid
    sr_mod 14898 0
    cdrom 34848 1 sr_mod
    sd_mod 30821 3
    pata_atiixp 4819 0
    ehci_pci 4000 0
    ohci_pci 4040 0
    ohci_hcd 23905 1 ohci_pci
    ehci_hcd 59252 1 ehci_pci
    usbcore 180104 6 usb_storage,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid
    ahci 23056 0
    libahci 21642 1 ahci
    usb_common 1656 1 usbcore
    libata 171112 5 ahci,pata_acpi,libahci,ata_generic,pata_atiixp
    scsi_mod 130669 4 usb_storage,libata,sd_mod,sr_mod
    nouveau 904702 0
    button 4677 1 nouveau
    video 11196 1 nouveau
    mxm_wmi 1475 1 nouveau
    wmi 8419 2 mxm_wmi,nouveau
    i2c_algo_bit 5399 1 nouveau
    drm_kms_helper 36254 1 nouveau
    ttm 63507 1 nouveau
    drm 238238 3 ttm,drm_kms_helper,nouveau
    i2c_core 24164 4 drm,drm_kms_helper,i2c_algo_bit,nouveau
    $ ip link
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    $ lspci #Just a fragment
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
    Subsystem: Gigabyte Technology Co., Ltd Motherboard
    Flags: bus master, fast devsel, latency 0, IRQ 10
    I/O ports at de00 [size=256]
    Memory at fdaff000 (64-bit, prefetchable) [size=4K]
    Memory at fdaf8000 (64-bit, prefetchable) [size=16K]
    [virtual] Expansion ROM at fda00000 [disabled] [size=128K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [70] Express Endpoint, MSI 01
    Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
    Capabilities: [cc] Vital Product Data
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [140] Virtual Channel
    Capabilities: [160] Device Serial Number 07-00-00-00-68-4c-e0-00
    $ cat /etc/X11/xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.38 (buildmeister@swio-display-x64-rhel04-15) Wed Jan 8 19:53:14 PST 2014
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    $ cat /var/log/Xorg.0.log
    [ 59.424]
    X.Org X Server 1.15.0
    Release Date: 2013-12-27
    [ 59.424] X Protocol Version 11, Revision 0
    [ 59.424] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 59.424] Current Operating System: Linux sanguine 3.12.7-2-ARCH #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014 x86_64
    [ 59.425] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2c39c1f9-de3e-4907-93dc-8b77422a07a1 rw
    [ 59.425] Build Date: 09 January 2014 08:47:24AM
    [ 59.425]
    [ 59.425] Current version of pixman: 0.32.4
    [ 59.425] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 59.425] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 59.425] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 13 12:55:56 2014
    [ 59.433] (==) Using config file: "/etc/X11/xorg.conf"
    [ 59.433] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 59.437] (==) ServerLayout "Layout0"
    [ 59.437] (**) |-->Screen "Screen0" (0)
    [ 59.437] (**) | |-->Monitor "Monitor0"
    [ 59.441] (**) | |-->Device "Device0"
    [ 59.441] (**) |-->Input Device "Keyboard0"
    [ 59.441] (**) |-->Input Device "Mouse0"
    [ 59.441] (==) Automatically adding devices
    [ 59.441] (==) Automatically enabling devices
    [ 59.441] (==) Automatically adding GPU devices
    [ 59.456] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 59.456] Entry deleted from font path.
    [ 59.456] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 59.456] Entry deleted from font path.
    [ 59.457] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 59.457] Entry deleted from font path.
    [ 59.457] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 59.457] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 59.457] Entry deleted from font path.
    [ 59.457] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 59.457] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 59.457] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 59.457] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 59.457] (WW) Disabling Keyboard0
    [ 59.457] (WW) Disabling Mouse0
    [ 59.457] (II) Loader magic: 0x804c80
    [ 59.457] (II) Module ABI versions:
    [ 59.457] X.Org ANSI C Emulation: 0.4
    [ 59.457] X.Org Video Driver: 15.0
    [ 59.457] X.Org XInput driver : 20.0
    [ 59.457] X.Org Server Extension : 8.0
    [ 59.459] (--) PCI:*(0:1:5:0) 1002:796e:1458:d000 rev 0, Mem @ 0xd8000000/134217728, 0xfdfe0000/65536, 0xfde00000/1048576, I/O @ 0x0000ee00/256
    [ 59.459] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 59.460] Initializing built-in extension Generic Event Extension
    [ 59.460] Initializing built-in extension SHAPE
    [ 59.460] Initializing built-in extension MIT-SHM
    [ 59.460] Initializing built-in extension XInputExtension
    [ 59.461] Initializing built-in extension XTEST
    [ 59.461] Initializing built-in extension BIG-REQUESTS
    [ 59.461] Initializing built-in extension SYNC
    [ 59.461] Initializing built-in extension XKEYBOARD
    [ 59.461] Initializing built-in extension XC-MISC
    [ 59.461] Initializing built-in extension SECURITY
    [ 59.461] Initializing built-in extension XINERAMA
    [ 59.461] Initializing built-in extension XFIXES
    [ 59.461] Initializing built-in extension RENDER
    [ 59.461] Initializing built-in extension RANDR
    [ 59.463] Initializing built-in extension COMPOSITE
    [ 59.466] Initializing built-in extension DAMAGE
    [ 59.468] Initializing built-in extension MIT-SCREEN-SAVER
    [ 59.470] Initializing built-in extension DOUBLE-BUFFER
    [ 59.472] Initializing built-in extension RECORD
    [ 59.475] Initializing built-in extension DPMS
    [ 59.477] Initializing built-in extension Present
    [ 59.479] Initializing built-in extension DRI3
    [ 59.481] Initializing built-in extension X-Resource
    [ 59.483] Initializing built-in extension XVideo
    [ 59.485] Initializing built-in extension XVideo-MotionCompensation
    [ 59.487] Initializing built-in extension XFree86-VidModeExtension
    [ 59.490] Initializing built-in extension XFree86-DGA
    [ 59.492] Initializing built-in extension XFree86-DRI
    [ 59.494] Initializing built-in extension DRI2
    [ 59.494] (II) LoadModule: "glx"
    [ 59.502] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 60.382] (II) Module glx: vendor="NVIDIA Corporation"
    [ 60.388] compiled for 4.0.2, module version = 1.0.0
    [ 60.388] Module class: X.Org Server Extension
    [ 60.388] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
    [ 60.401] Loading extension GLX
    [ 60.401] (II) LoadModule: "nvidia"
    [ 60.401] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 60.455] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 60.455] compiled for 4.0.2, module version = 1.0.0
    [ 60.455] Module class: X.Org Video Driver
    [ 60.462] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
    [ 60.462] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 60.464] (++) using VT number 1
    [ 60.464] (EE) No devices detected.
    [ 60.464] (EE)
    Fatal server error:
    [ 60.464] (EE) no screens found(EE)
    [ 60.464] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 60.464] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 60.465] (EE)
    Last edited by Skitter (2014-02-16 20:57:21)

    Please post the output of:
    dmesg -c
    modprobe e1000e
    dmesg

  • Can't send Mail since internet connection via USB key

    I now access internet via a USB key and although I receive mail as normal into my Mac 'Mail' from my email account when on line, all mail I now try to send sits in the outbox with the following error message:
    This message could not be delivered and will remain in your Outbox until it can be delivered.
    5.7.1 service refused. Client host 80.10.46.95 blocked for spamming issues. Adresse IP source
    80.10.46.95 bloquee pour incident de spam. Ref http://r.orange.fr/r/Oassistance_adresserejetee .
    I presume since changing my way of connecting to the internet it has thrown up some server problem and I need to change something in my preferences on Mail...but what?
    Any help would be appreciated as it's driving me mad!
    Many thanks.

    Hi Han71, and a warm welcome to the forums!
    Start with these three, check SpamCop or SpamHaus to see if your IP is there...
    http://spamcop.net/bl.shtml
    http://www.spamhaus.org/lookup.lasso
    http://www.spamhaus.org/zen/
    Sometimes an ISP will bloc a whole other ISP too, if it's the source of too much SPAM.
    Might also see this post by Gallomimia...
    http://discussions.apple.com/message.jspa?messageID=9465359#9465359

Maybe you are looking for