USB Keyboard Troubles- Help?

So weird. First it worked. Now it doesn't.
This is my second Windows 7 installation (I had to re-install due to a password glitch).
Both times I created a BootCamp partitian (200G) via BootCamp Utility, and had a relatively uneventful install.
The first time my USB keyboard worked immediately. I didn't even have to install the drivers!
But then I had to re-install due to a password glitch.
So I erased the partitian, and used BootCamp Utility again, and went through the process again.
This time I had borrowed a wired keyboard just to make sure everything went smoothly.
But my Apple USB Keyboard wont work. At all.
I've tried reinstalling, uninstalling, and reinstalling the drivers again and again.
But no luck.
It works FINE here in OSX (duh), but I can't even get the CAPSLOCK light to come on in Windows 7.
I've checked DEVICES and it doesn't come up there.
Any ideas?
Help?

If you checked devices, I guess this time you got a password keyed in with whatever keyboard.
In Windows, you need to run Bootcamp update from your OSX install DVD to update video, mouse, keybd, bluetooth, etc. drivers, install Bootcamp in Windows.
You should do this when you have the keyboard that you are going to continue using attached to your computer.
Password Idea:
Because there are a number of them for iTunes, various Mail apps, Windows, Mac etc., key or copy/paste them into a (.Txt) file on Mac, Windows, Flash drive.
So, if you could not get into Windows for example, you would be able to see what was keyed from other OS.

Similar Messages

Press any key... help! the usb keyboard is not recognized and I cannot reboot

Hi,
I really hope that one of you can help me. I had used boot camp once on my MacBook Pro so, I did not think to plug a USB keyboard on my son's iMac before starting the installation process. As a result, when I am asked to press any key, I am stuck. Obsviously I could not reboot so I unplugged the iMac hoping that it would come back to OS and give me a chance to have the USB keyboard installed and recognized before going back to the installation. Unfortunately, rebooted and went directly to where I was at.
Thank you for your help

I would restore the iPod to factory defaults/new iPod on your computer and start over. It appears the iPod is associated with another account. Any media that came with the iPod does not belong to you and di not transfer with the iPod hardware.

My Macbook Pro keyboard AND USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?

My Macbook Pro keyboard and USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?
This is quite frustrating, since it randomly occured as I was browsing the web. It seemed to happen out of nowhere. I cannot login to my user account because I cannot type my password.
Any help will be appreciated.
-Matt

If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
Next, download the 10.5.6 Combo update from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

Help with the Korg nano key usb keyboard!

I recently bought the Kord Nano Key usb keyboard for the purpose of triggering drum sounds and sounds from the library. Will this keyboard do this?
I have very limited time with which to read manuals and experiment. Could anyone just tell me how to get going with this keyboard. I have installed the driver and can see that some sort of signal is getting into logic.
If it is possible, can you get me up and running quickly?
Thanks

I'm assuming the Akai came with a manual, I know Logic did, you're going to have to do a little of the work yourself, your question is so vauge that no one knows what you're tried, or if you've even tried anything at all! This is professional software... you HAVE to read manuals... have you used Garageband? Have you plugged the Akai in, have you looked in Logic's online help systen to see how to load a software instrument?
Or job is not to hold your hand, this is a user forum, there are people here that will help but you need to to some work on your own.

I am using a USB keyboard and everytime I wake the iMac from sleep the keyboard will not respond unless I unplug and replug the keyboard. I am using a mid-2010 iMac with OSX 10.6. Any help would be appreciated.

I am currently using a USB keyboard (PC Model) and everytime I wake the computer from sleep the keyboard no longer responds unless I unplug and replug it. The USB mouse I am using works fine with no issues and I have already gone through the prompt to identify the keyboard in the settings. If anyone know of a setting I can use to permenantly enable the keyboard so I no longer have to unplug and replug it that would be appreciated.
Thank you.

Your 2010 MBP would be able to handle Yosemite, but I would strongly suggest that you get the current problem sorted out before trying to upgrade to Yosemite. I'd also recommend another backup that isn't created by Time Machine if you are thinking of upgrading. SuperDuper and CarbonCopyCloner can make bootable clones of hard drives. If you clone your existing system to a fresh external drive, you would be able to boot from that drive and recover quickly in the event that your Yosemite upgrade didn't work out. Time Machine backups are not 100% reliable.
It's possible that, if your internal HD is the one that shipped with your MBP in 2010, it may be failing. If it keeps needing repairs, that is probably a sign that it is approaching the end of its useful life.
Have you run Disk Utility's Repair tool on the external drive as well?
I mentioned the hub because some people have reported here that attaching their USB 3 drives through a USB 2 hub solved some disconnection problems. A good-quality powered USB 2 hub won't cost much.
My most recent brush with random disconnections involved a nice new OWC drive enclosure. I used the cable that came with the drive, but the drive kept disconnecting. Using a different cable solved the problem. You wouldn't expect that what appeared to be a high quality cable would be a problem straight out of the box, but it was.

Apple USB keyboard does not work with one internal usb port

Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
Guillaume

I'm facing the same problem, found any solutions ?

External USB keyboard does not work with T60 after BIOS upgrade

External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
It does the same with or without the docking station.
Anyone else bumped into this problem yet?
Has someone found any fixes for this?
t

Hi and welcome the forum!
Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Apple USB keyboard does not work

I have the same problem as described by Sweboss on November 15th, 2012. The Apple USB keyboard is working perfectly, but if I shut down the computer, when I switch it on again, the USB keyboard does not respond, and the computer is looking for a Bluetooth keyboard (which I had before). I have tried switching off, unplugging all peripherals, then unplugging the computer, waiting 15 seconds, then plug it in, wait 5 seconds (this is a remedy proposed in other mails). Switch on and the USB keyboard does not respond. It is not that particular USB port, as it works perfectly well with other peripherals like my scanner, or printer, and changing ports does not help. And when I tried it last time, I had no other USB peripherals connected. Can anyone help?

That is definitely some strange behavior, good to finally be working, but does not explain exactly what causes the behavior. Could have something to do with the energy saver part of the operating system, or a miscommunication with the USB bus itself. With multiple USB ports it would be good to test on different ports to see if that is an issue. Anyway, it is working now and that is good.
Another I don't know why but it works: a couple months ago a user was having problems with a wireless keyboard. The keyboard-iMac communication resulted in random charaters, time lag, and other bad behavior. The user finally found by accident that turning the keyboard off, removing the batteries, and then spending about five minutes just pressing keys, placing the palm of the hand on the keyboard and pressing, just pressing and pressing, and then replacing the batteries and turning on the keyboard, it worked fine. Seems like it is necessary to just force the keyboard to discharge all of the key switches. Those keyboards use capacitance switches instead of mechanical switches. So they retain a charge.
While that was a wireless keyboard, I wonder if that was what happened in a way with your keyboard...the unplugging and leaving it for a period of time, any charge may have dissipated and it would work again. If this happens again, try the above procedure and see if it helps.

Want Mac mini and G4 to share Display and USB keyboard and mouse

I bought a KVM switch at a local electronics store. I got the only one that claimed Mac compatibility (PPA Int'l). I can't plug the switch into the G4 Cube. No such ports. With the adapter that accompanied my brand new Mac Mini, I can plug the KVM monitor port into the mini's monitor port, BUT that port is currently being used by the Apple DVI-to-ADC adapter I bought so I can connect my Cinema Display to the Mac mini.
The KVM switch wants 3 ports on each computer: a VGA (monitor) port, the keyboard port, and the mouse port; but the keyboard/mouse connectors are not USB.
As things stand--without the switch--I can shut down whatever computer I'm working on (mini or Cube), unplug the display from one, connect it to the other, power up and everything's fine. I suppose the only advantage with the KVM switch is being able to power off, switch, then power on without having to move the display plug.
My QUESTION is, does anybody manufacture a KVM switch I can use between two Macintosh computers to share use of my USB keyboard powered from a USB port on the display, and my USB mouse powered from a USB port on the keyboard?
Or is the answer NOT to go for the convenience of a KVM switch?
Does it matter that the mini OS is Leopard, and the Cube OS is Tiger?
I am heartily impressed with the mini. Setup was over in 5 minutes, and I must say it's fast. Appreciate any help from the experts. --Spot

I had the same problem, and finally came up with two other alternative solutions.
First, if you have a recent LCD monitor, it is fairly simple and cheap. The Mini has a digital connection for the monitor. My G4 400 MHz has both digital and analog connections. I have a Samsung 19 inch widescreen monitor that has both a digital and an analog input. I connected the G4 to the monitor using the analog input with my old cable, and connected the Mini using the digital input. The Samsung has a switch that will use either the digital or analog input - very easy.
Now the keyboard and mouse. I got a 6 foot USB cable with the A plug on one end and B plug on the other, plugged the A plug end into the G4, and ran the cable with the B plug up near the Mini. It helps to keep it close. You already have the keyboard/mouse plugged into the Mini. You simply unplug the keyboard cable from the Mini, and plug it into the B plug from the G4. Switch the monitor from digital to analog, and you have the G4 (remember to start it up). Once you have run the cables, it takes about 10 seconds to make the switch.
Second, and I use both ways, is to get an inexpensive wired router. I bought a Belkin 4 port router (about $30, I think), got a couple Cat 5 cables, hooked both the Mini and G4 up to the router, along with my internet connection, and have both computers available on one monitor with no physical switching involved. You will need to go to System Preferences/Sharing and turn on Personal File Sharing (there may be another change, but I can't remember it right now).
When all is hooked up, you go to GO in the Finder Menu Bar (make sure the G4 is booted before doing this) click on either NETWORK or CONNECT TO SERVER, find your G4 and connect. It may be confusing the first few times, but it works great because you have access to both computers at once, along with your internet connection - the best of both worlds!
I did this in January of this year, so please forgive me if I have forgotten a step somewhere. Ask me and I'll be glad to try to walk you through it. The first solution is the simplest to do, and the second in the most versatile. It's your choice.
Hope this helps. Just don't be intimidated by it - if I can figure it out, we can get you connected. Good luck!

Macbook Pro Retina (15") can't connect to wireless mouse and external USB keyboard

Hi All,
I got my new MacBook Pro Retina (15 inch) about 3 weeks ago. It works fine. I got a 30" Dell screen that I am using via thunderbolt/usb adapter. Also, I am using a thunderbolt ethernet adapter. Both adapters work fine without any problems.
I have an apple usb keyboard connected to the USB hub of the screen, as well as my iphone cable. It is a regular, full size apple keyboard. In addition to this, I have a logitech nano connected directly to the right usb port of the macbook pro.
This setup was working well until a few days ago. I lost connectivity with my mouse. Initially, I thought the batteries are empty. After replacing them, I still had no connection (again, the usb receiver is *directly* connected to the macbook).
I changed a few cables here and there and noticed that I can get either the keyboard to work or the mouse but not both at the same time. A reboot did not help.
Did anybody encounter such a strange problem already? If so, what could I possibly do?
Thank You,
--Martin

Hello nikkig00,
It is certainly difficult to use the computer if your wireless keyboard and mouse do not connect. I found a few resources I recommend for this issue.
I recommend reviewing this article first:
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
If the issue persists, I recommend reviewing the section titled "Top troubleshooting tips" in the article below. Step 9 specifically stands out to me for the issue you described:
9. Restart your computer
Sometimes a simple restart of your Mac is all it takes to get things running smoothly again. You may also want to try resetting your computer's PRAM and NVRAM.
Bluetooth Quick Assist
http://support.apple.com/kb/ht1153
Thank you for using Apple Support Communities.
Best,
Sheila M.

Volume control buttons not working with new usb keyboard

Hi all,
I recently replaced the bluetooth keyboard that came with my iMac with the usb keyboard (the long aluminium one, with the number block). Typing is no problem, but the volume control keys dont seem to work with this keyboard as I was used to with the bluetooth keyboard: max vol, increase/decrease and vol. off dont operate with any of the keys (f, alt, str, cmd, shift). Only thing I can do is get a view of the running programs or make the current application vanish from the screen.
Tried to change the keyboard setting in preferences for the F1-12 keys - made no change.
help is very much appreciated.
Thanks

I was able to fix this bug by upgrading to OS X 10.6.8.
Very strange that a) it was a problem in the first place and b) that the upgrade did not happen automatically
Thanks very much to Haggibbor, who alerted me to that possibility. Since I read this in a thread I did not open myself, I unfortunately do not know how to let him have the 10 points I would like him to receive. (Hints for this newbie are very welcome.)
Problem of volume control keys is now solved.

My usb keyboard is no longer detected after the power was switched off

I sometimes relocate my Imac to another office and after the power has been switched off the computer no longer detects my usb keyboard.
This had happened several times now and sometimes it all of a sudden starts working again after a couple of hours (but it doesn't now).
The computer keeps searching for a wireless keyboard which I don't have. I have tried everything from switching off power again to reboothing, but nothing works. I have checked all USB ports with other devices and they all work. The problem is not the keyboard itself, because it does work when I plug it in to my MacBook.
Anyone recognize this?

Yes, to a blue tooth mouse only. I have tried disabling the blue tooth connection, but when i restart my computer it automatically connects again.
I got the keyboard to start working again now by pressing all the keys one by one (in order to discharge them, read that somewhere). I helped. But how annoying is that?!

My usb keyboard is no longer recognized

the update hung trying to find a bluetooth keyboard
had to use this bt keyboard
usb mouse no longer works plugged in to the usb keyboard
usb mouse works fine plugged in directly to my Mac mini 2014
HELP

Yes, to a blue tooth mouse only. I have tried disabling the blue tooth connection, but when i restart my computer it automatically connects again.
I got the keyboard to start working again now by pressing all the keys one by one (in order to discharge them, read that somewhere). I helped. But how annoying is that?!

Why don't my Apple USB keyboard and mouse work in Win XP after bootcamp driver installed

Hey there,
I just installed Win XP Pro + SP2 using Bootcamp 3.0 on my Mac Pro 1.1 (2006) which is running Snow Leopard (10.6.8). The Win XP installation went flawlessly and everything seemed to be working OK (mouse & keyboard were fine) until I installed the Bootcamp drivers from my OS X installation DVD. The installation didn't report any problems, but when it was finished, the keyboard (Apple USB keyboard) and mouse (Logitech USB mouse) stopped responding. No power to the mouse at all makes me believe that it is actually the USB drivers themselves that have failed. Rebooting WinXP didn't solve the problem - it boots WinXP just fine (and fast!), shows the Bootcamp Help screen, but no mouse or keyboard, a.k.a., USB, response.
Can I recover from this somehow?
Help please?
Thanks,
Ron

Problem solved.
It seems that the boot camp 3.0 drivers installed from my 10.6.8 DVD weren't sufficient. I repeated the install from scratch, but rather than rebooting as soon as the BC 3.0 drivers were installed, I allowed the Apple Update utility to D/L and install the BC 3.1 and 3.2 updates. Viola! Everything works brilliantly. My Mac Pro is now the best Windows PC I have ever owned

Lenovo USB keyboard - Trackpoint/Touchpas not working

I am now experiencing the same problem in Win7 as I barely got away with in Vista.
The problem is as follows:
- I have the Lenovo USB keyboard with built in Trackpoint and Touchpad (wonderful).
- When I installed this keyboard in Vista it worked out of the box, but in Windows Update I got a recommended update for newer/better drivers.
- When I installed this driver, the Trackpoint and Touchpad stoppet working - so I had to restore my system and hide these updates in Windows Update.
- So when I install Win7 RTM these drivers seems to install with the system, and therefore the Trackpoint and Touchpad on my external keyboerd does NOT work out of the box. I do not get any updates for this either.
Tried solutions:
- I have tried to install the keyboerd drivers.
- The driver with Hotkeys installs alright, but does not solve the problem.
- The regular keyboard driver will not install, because it says that I there is a newer Synaptics-driver which has to be removed first.
- Well, there are no installed Synaptics-drivers to be removed - probably because these drivers are installed with the system.
- I have also tried to diable the PS/2 driver etc. but nothing works.
--> So, I am actually stuck with my wonderful external Lenovo USB keyboard without being able to use the Trackpoint or Touchpad. The worst although is that I know whats making the problem, but do not know how to solve it...
Can anybode please help, I cannot believe I am the only one having this problem (in Vista or in Win7).
Henrik
Solved!
Go to Solution.

I have a USB Travel Keyboard with UltraNav. I am not sure if it is the same as yours. But I have used the following two drivers (for Vista) and the keyboard has been working fine under Vista. Recently I upgraded to Windows 7. The vista driver seems still working fine.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66917
One issue I found is that I cannot run the setup.exe to get the keyboard driver installed, it will claim something like OS specific program not found. But if you go inside the folder to find dpinst.exe, run it and you are good to go.
And this link for all possible drivers.
http://www-307.ibm.com/pc/support/site.wss/product.do?subcategoryind=0&familyind=50238&brandind=6&do...

USB Keyboard Troubles- Help?

Similar Messages

Maybe you are looking for