Usb lan card connecting problem

how to connect usb lan card ax88772a in mac 10.7 .. i have downloaded and succesfully installed the latest drivers it is present in the network plugin but can't acces it network preferences .

Hi Harry,
I don't have one, but other USB networking things that need drivers usually require...
Do not have the device plugged in when Installing the Drivers, if you did you likely need to run their uninstaller & reboot before installing.
Install
Reboot
Wait for Mac to be fully booted up
Plug in device
Open Sys Prefs>Network, hopefully you see New Port detected, older OSXes you need to go to Port Configurations first to see it.
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.

Similar Messages

Will multiple Lan cards cause problems using rmi?

Will multiple Lan cards cause problems using rmi? If a host has two or more network cards (only one of which is Internet-enabled), how does RMI know which IP address to use? There seems to be a problem when such a client registers with an RMI service, and has a client-side callback method invoked by the server.

You can tell RMI the address you want by defining java.rmi.server.hostname at the JVM which exports the remote object.

Altell USB Internet Connect Card connection Problem

Altell USB Internet Connect Card
My daughter is using and Alltel , UT Star Com, UM 175 wireless connect card on a iMac G5 with OS 10.4.6. She had a good internet connection for two days, then nothing since. She has had many phone tech assistance with Alltel, but still unable to reconnect.
In System preferences it shows that she is connected via “Pan Tech USB Modem” port 777. She is getting good signal strength with send and receive signal and connect time. However, when using Safari and Mail app she is unable to connect to the internet.
It seems to me that the problem lies within the set=up between the iMac and Alltel card. The card seems to be making the connection, but for some reason the computer can’t realize that this card is the way to the internet. Safari brings up the usual “you are not connected to the Internet”, then the diagnostics application that guides you through troubleshooting with the usual questions, none of which include a wireless USB connection.
Is there some other thing she needs to do for her iMac to recognize the Altell card?

I just gave up on this problem and went in another direction

USB/memory card reader problem, any help would be great

Hello all, I bought a new memory card reader today and our computer will not recoginize it's there. The reader is a Targus universal 32 in 1 memory card reader/writer and I think the model is TGR-CRD25, it also says USB 2.0. I didn't have any problems with the old reader as far as the machine "seeing" the reader. This new reader does show up in the system profiler but the little power light will not come on and I get a "low power for device" type message when I plug it in. I unplugged the keyboard and plugged in the new reader to the USB port where the keyboard was connected and the light came on on the reader but iphoto was still saying no storage device when I tried to import pictures? Any ideas?

There is very little extra power available once the mouse is hooked to the keyboard. The "real" solution is to get a USB Hub with its own power supply.

Lan Card Installation Problem

Hi All,
I have HCL LX INIFINITY POWERLITE 6010 G1 laptop which Marvel Yukon 88E8053 PCI-E Gigabit Ethernet Controller . I tried lot of time to install the driver of it on Sun Solaris but I am not able to install it. I have done add_drv -i and give device id and vendor id . Still gives error softwares is partially install but not able to connect hardware. This lan driver is installed on Windows and Linux . Can anybody help me to sort out my problem or some pkg to download .
Thanks in advance.

You said you went through CMOS and reset everything, but did you CLEAR the CMOS? If not, do that.
If this still does help, then take all expansion cards out except video and see if it boots.
Also, try removing memory stick/s if you have more than one.

Airport card connection problems

Running an iMac g4, 800mHz with an airport card installed, firmware v. 9.52. I can connect to an open Linksys network no problem but I can't connect to an encrypted (WEP) Airport Extreme network or an encrypted (WAP) Medialink network. In both cases the routers are w/in about 10 feet of the computer, and line of sight, so it's not signal stength. I'm thinking maybe the airport card firmware? if so, how do I upgrade same?

Word for word the same problem I'm having. I've been days updating (jumped from 10.1.2 in an 800mHz Lampshade iMac all the way up to 10.4.11 to try and fixed the issue.) to no avail. The firmware on the airport card is 9.52, and no additional updates are available. It WILL connect if I completely remove security from the network. But as soon as I try anything WEP or WAP it gives me the same error message about the password not working.
Also trying it on two different routers.
Here's hoping we get a response! If I can get this thing working in the guest room, then we'll be a 5 mac household! (not counting iPad & iPhones).
I know these things are old... but they're still gorgeous and worth using! HALP APPLE!

Graphite ABS Ethernet hub LAN internet connection Problems

I have a first generation graphite ABS connected to my 5 port 10 base-T hub. My cable modem also connects to the hub as does my B&W G3.
My powerbook Titanium 867 connects to the ABS. Everything is set to DHCP. The problem is, I cannot connect to the internet with both Macs at the same time. It's like one connection is blocking the other.
What settings should I use on the ABS to enable both Macs to connect to the internet?

Using a hub in this way is incorrect. The DHCP server provided by the graphite ABS would conflict with your ISP's DHCP server and they don't like that.
Your options:
Replace the graphite ABS with a wireless base station that has one or more LAN ports (in addition to the WAN port).
Place a wired router between the cable modem and the graphite ABS. Configure the graphite ABS so that the option to distribute IP addresses is DISABLED. In this configuration the graphite ABS will act only as a wireless access point. The wired and wireless clients will all get IP addresses from the wired router.

AirPort Extreme Card Connectivity Problem with D-Link DI-524

Have the DI-524 connected to my cable modem and to my old 9600 via ethernet. The 524 connects wirelessly with my son's Dell laptop wthout difficulty. Have no encryption enabled. Have a new G5 with AE Card, which shows that I'm getting a wireless signal (all bars lit), but cannot get Safari to work. Get a "Computer to Computer" network status message. Keep getting a "This computer is not connected to the internet." message from Safari, and no amount of configuring works. The Network Set-Up Assistant keeps asking for a DHCP client ID, which I do not use with the TCP/IP setup, so I can never get through the set-up on the G5. I must say this is really ticking me off. Got no help from D-Link, except to check that the 524 seems to be working properly. the cable company was of equally no use. Hopefully, one of you Mac faithful can help me out. It's a **** shame a free-after-rebate D-Link can get up and running with the Dell, and a $100 AE Card is making me crazy.

I cannot offer any suggestions, but we've got the same problem.
My DL-524 does not play nice with my wife's 12" PowerBook using wireless, but my 15" PowerBook works fine over wireless. I normally enable WEP and MAC address filtering on the DL-524, but I disabled everything and still no dice. The PowerBook responds the same each time:
"There was an error joining the AirPort network"
I looked in the console logs (on the PowerBook) and see multiple occurrences of this:
WirelessJoin unexpected status: 8
The thing is, I generally know what I'm doing with my home network. I have 4 computers at home that work fine both wired and wireless, and like I said, my 15" PowerBook works fine wirelessly with the DL-524. But the 12" PowerBook will not communicate wirelessly.
15 PowerBook G4 1.67 Mac OS X (10.4.2)

Nokia 5300 USB PC-Suite connection problem

I have tried to get my Nokia 5300 to connect to PC-Suite through the supplied USB cable. I can get a connection using Bluetooth, but with USB I can only connect the 5300 in disk mode.
I can see that many others on these pages have reported the same symptoms I experience:
- Error message during installation of PC-Suite regarding "setupext.exe" referencing memory at location "0x00000000".
- Windows "New hardware" wizard interfering when the 5300 is connected, popping up and insisting on installing new drivers, then failing and after you have closed the wizard it repeats this procedure.
So, apparently the cable driver installed is not recognized by Windows as the correct driver for this connection. I have tried in vain to clean out the installation in order to start over:
- Removed cable connectivity driver using the "Remove software" control panel.
- Same action for PC-Suite.
- Used the PC-Cleaner program to remove all traces of the installation (this failed)
- Manually (using regedit.exe) removed the last traces of Nokia entries in the registry.
And then, after re-installing the latest version of PC-Suite with my firewall disabled, I still have the same problem.
At this point I don't really know how to proceed and any suggestions that could help me overcome this problem would be highly appreciated.

Just to balance this a bit, I just connected 5300 to my PC with cable, did you use any wizard what so ever, only selected the mode in phone screen, waited for 10 secs and I was connected to PC Suite, so yes, you guys have a problem but it is not a designed feature that the connection build up is that complicated. Unfortunately I do not know what is the difference between my PC setup and yours so that I could suggest a rootcause for the problem

Z1 external connector cover error and sd card connectivity problems

Hi
I have a few problems with my new phone in that I suspect it is faulty
I get this error message despite the covers being firmly closed: 'please close the external connector covers to secure waterproofness' when there is an SD card inside and when there isnt one. This happens everytime I switch the phone on
On the camera: 'memory unnavailable' when accessing camera function having set memory to SD card when it is inserted
It does seem to recognise an SD card in the phone but cannot access any data from it (even though it did before).On inserting SD card comes up with message that it is safe to remove. when going to settings->storage it has 'Mount SD card' in the SD card section
Any ideas before I take it back?
Thanks for your help

1. that is a reminder, it should give you an option to disable that message/reminder
2. it seems that your SD card its acting up, test it with other phones and/or a computer
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Tiger and USB and Classic connection problems

I have two instances where a USB device that worked in Panther/Classic will not connect/work in Tiger 10.4.3/Classic.
One is StylusRIP software from Epson that I use to print Postscript files (mainly from IllustratorCS) with my Epson Stylus 3000. When it's working, the RIP runs in Classic, but shows up as a printer choice in the Print Center. It worked fine in Panther/Classic, but since I upgraded to Tiger the printer is not recognized. The printer works in OSX using the non-Postscript driver, so I know that basic connectivity (cables, ports, etc.) is OK.
The other is a RoboLab USB infrared transmitter. Same scenario.
While troubleshooting the transmitter, I tried booting into OS9 (on my G4) and the connection was made. It worked fine. I tried the same thing with StylusRip, and it too worked fine, the printer was recognized.
My USB Epson scanner still works in OSX, but it has a native driver.
Can anyone tell me what could be different about the way Tiger handles USB that could affect the interoperability with devices/software that require Classic?
Any suggested troubleshooting? Is it possible to "reset" the USB ports? I've reset the PRAM, haven't tried resetting NVRAM.

Thanks for your reply. Yes, I am running 9.2.2. The only thing that changed was the update to Tiger. I have called ESPON, and they refer me to Adobe because they licensed the RIP from Adobe. I've not had any success with that yet. The last update of RIP does not support the Stylus 3000 printer, and I don't think it's native anyway. The set-up I was using was a "non-supported workaround", so I may just be out of luck. Which is a pain, because the printer still has some miles on it. I may try to see if I can use an older Mac running 9.2.2 as a print server.
Robolab has an OSX native update out, so we will get that.
What I found curious was that both pieces of software, or the USB connectivity required by both, was broken by Tiger.

WLAN USB Adaptor & Internt connection problem on iBook G3 Mac OS X 10.2

Hi everyone - I hope someone may be able to help me!
I have an old iBook which I haven't used for over a year and am not particularly computer savvy anyway. I've booted it up again to find the driver for my ASUS WL-167g adapter was missing... can't remember why now, but found the driver online and reinstalled it successfully. It picks up the network at home fine, shows good signal strength and yet when I open internet explorer I get "specified server cannot be found".
In Network I'm at a loss as to what means what let alone the settings that it should be on! Can anyone talk me through what settings should be on in the network pane? In previous homes I've never had any issues. Should also note that I live in shared accomodation and the router is in someone else's room, so access to it is limited!
Thanks in advance for your advice.

Do you know any more information about the network?
Such as:
Is the IP static or is it assigned via DHCP? In other words, does the router hand out IP's to it's clients or do you have to set it manually?
Secondly, do you know if the router is using any kind of encryption? If you are and the key is not set on the wireless card, you will not be able to get on the internet without setting it.
Just a couple of things to start with. Check these and get back with us.

Upgrading the G3 /DT with USB PCI Card for Printer Connection

I would like to connect a Brother MFC-9160 laser printer to one of my Beige G3 /DT with Macintosh OS 9.2.2 installed.
There are two ways to do that: USB or Parallel. I don't know if Parallel adapters for Macintosh are available. This is the reason why I am favouring the solution of PCI USB upgrade.
The problem is that the few USB adapters I saw on sale on various French Mac warehouses were all USB 2.0 compliant, and required a Power Macintosh G3 /BW.
I suppose that a USB 2.0 compliant card is also de facto USB 1.1 compliant, but I am not sure. Besides the hardware issue, there is of course the problem of support on a Beige G3 for USB 1.1.
Could you please elaborate on the hardware which would run on a Beige G3? I am open to any friendly advice
Frederic W. Erk

By the way I wonder if it would be possible to
connect to the laser printer through electricity
network. No cables, here because the building in 400
years old and too large. Wireless, he he... Not even
worth speaking about it....
I'm not sure about what kind of electrical wiring you have available over there, or if these kind of products are compatible, but there are some options in the US for using the electrical outlets in a house to create a LAN network. With this kind of network you could use keep the printer on the B&W and turn on USB printer sharing. Printing from OS 9 on the G3 might not work with all printers. That kind of networking equipment is more costly than just adding a USB PCI card to the G3 to use the printer directly, but you might also be able to share a single high-speed internet connection that way. It all depends on what your needs are.
Is this what you were asking about?
http://review.zdnet.com/NetgearPowerline_HD_Ethernet_Adapter/4505-330416-31970278.html

Install problems USB Adapter Card support 1.4.41 to Mac OS 8.6

I am attempting to install the Apple USB driver 1.4.1 on my PowerMac 7600/132 to be able to use a newer printer. This computer does not have internet access and is a stand alone financial computer running Quick Books Pro.
Mac OS 8.6
128 MB Ram
132 MHZ
I purchased a Keyspan USB PCI Card - UPCI-2
This is a USB 1.1 device and supports "Mac OS 8.6 (or later)
Internet connection required to install driver under Mac OS 8.6 - 9.0
Current USB Extensions
USB Device Extension 1.2 111K Apple yes Enabled Yes
USB Support 1.2 98 K Apple yes Enabled Yes
I have downloaded the USB 1.4.1 driver from the apple download center
http://download.info.apple.com/AppleSupport_Area/Apple_Software_Updates/English-North_American/Macintosh/USBUpdates/
And copied all file to a Zip disc
Files included
About USB Adapter Card Wed, Jan 12,2000 9K
Install USB Adapter Card Thur Feb 24, 2000 29K
Installer Fri Aug15,1997 193K
USB Adapter Card Tome Thur Feb 24, 2000 320K
When I start the install it initiates and then a dialog box opens
"Please insert the disc:
USB Adapter Card Support"
Keyspan was unable to advise any solution.
Any thoughts?
Thanks for your suggestions
Spencer

I did this years ago when I had a PM6500 running 8.6 & added a USB PCI card, but know I didn't have the problem you are having.
When I downloaded from the link you provided, I got this file USBCard_Support1.4.1.smi.bin. After using Stuffit Expander, I got this file +USB Card Support 1.4.1.smi+, which is the installer. I don't have a Mac running 8.6, so I can't try the install.
Suggest you do this. Put the smi.bin file in a folder on your desktop & then uncompress using Stuffit. This will yeild the .sim file. Then double click the .sim file. Did you get the message "+Please insert the disc: USB Adapter Card Support+" when you double clicked the .sim file? Or some other file?
When you downloaded the smi.bin file did you use a Mac or a PC & then put on a Zip disc? What computer did you use to uncompress to get the .sim file?
 Cheers, Tom

Nokia 6700 USB cable connectivity problem -fixed-

Ok, got my 6700 today. Everything worked like a charm, until I tried to connect it to my PC using the supplied USB cable. I downloaded and installed the latest Nokia PC suite which supports this phone (7.1.30.9) and connected the phone. Vista was unable to install a driver, and the phone was listed in the device manager as 'unknown usb device'. The phone display reported 'no response from host' after plugging in the usb cable.
I searched online for a solution, and tried the following:
- repaired the install of the Nokia connectivity cable driver: no success.
- deinstalled the nokia pc suite, ran the pc suite cleaner, rebooted and reinstalled the pc suite: no success.
- threw away the unknown usb device in the device manager and plugged the cable back in so that Vista would try to install the driver again: no success.
- tried other USB slots (not behind HUB): no success.
At this point I was so frustrated that I decided to take out the supplied 1gb micro sd card and transfer some data to it using a card reader. When I looked in the root of the sd card, I noticed that there was an executable called pc-suite.exe there, among some other files. I decided to delete those files to see if they were causing the problems, I deleted the following files:
- autorun.inf
- launcher.exe
- pc-suite.exe
- qf
Replaced the micro sd card in the phone, plugged in the usb cable and voila: connection! Everything worked like a charm.
During my online search I noticed I wasn't the only one experiencing connectivity problems with the 6700. Maybe this fix will help other people as well, that's why I decided to post it here. ;-)
Peter

Thanks Peter, nice job - same problem, your solution is working. Shame on Nokia - i have so many problems with E52, and now with 6700 - why ? Is it so difficult to make a reliable software ? So disappointed ... maybe Apple is the solution - but after 10 years with Nokia why change with Apple ?

Usb lan card connecting problem

Similar Messages

Maybe you are looking for