USB Medical Device not recognized by iMac or Windows through Parallels 7 Virtual Machine

I have a USB Medical device which initially i was using through a Windows based Laptop, I want to connect it to my iMac to use it through Parallels on Windows 7. The device is not recognized by my iMac therefore it is not recognized by the virtual machine. It does not show in the Universal Usb devices or else. It is a Windows USB Device.
Would appreciate your help.
Thank you
Kantu

Thanks for the reply. I was able to get the WD hard drive back up and running using the Disk Utilities application. I tried to fix it using the diagnose / repair option but that failed so I had to reformat and partition it. Now it works great but I lost all the data that was on it. I still don't know what caused the problem and hope it doesn't happen again.

Similar Messages

  • Device not recognized in iTunes for Windows

    iPhone 5S is not being recognized by iTunes or Windows Explorer.

    Hey there andrijfrommississauga,
    I have an article here for you that will help you troubleshoot this issue with iTunes not recognizing your iOS devices:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • IOS5 Update causes Device not recognized in iTunes for Windows

    iOS: Device not recognized in iTunes for Windows
    I did an iPad1 IOS5 update and on the reboot could not get iTunes to recognize my iPad.
    I did all the recommended troubleshooting to no avail. So I called this morning and while on hold I put my password back on my device just as before and BAM iTunes now recognizes device and is doing my restore.
    So if you do a backup of your device before the update and you have it password protected, it won't recognize the device until you go through and setup a new device and put your password back to what is was before, then BAM you're good! Good Luck and hopefully you won't have to spend the day I did figuring this out.

    Hey there andrijfrommississauga,
    I have an article here for you that will help you troubleshoot this issue with iTunes not recognizing your iOS devices:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • TS1538 iOS: Device not recognized in iTunes for Windows doesn't fix my issue

    I followed the instructions in this link but it has not fixed my problem. After I have done the screenshots and go into the device manager, my iphone is still not recognized in any of the devices.  Any suggestions?

    Hey there andrijfrommississauga,
    I have an article here for you that will help you troubleshoot this issue with iTunes not recognizing your iOS devices:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • TS1538 Device not recognized in iTunes for Windows 8.1.

    Both my ipad and iPhone are not recognized in iTunes for Windows 8.1.
    Both are seen by windows explorer but not iTunes.
    iTunes wi-fi sync does not work either.
    I reinstalled iTunes and it still doesn't work.

    Hey there andrijfrommississauga,
    I have an article here for you that will help you troubleshoot this issue with iTunes not recognizing your iOS devices:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • TS1538 Device not recognized in iTunes for Windows  I wasted about 1.5 hours with Apple on this issue. It all started happening after I updated to the latest version of iTunes. I haven't been able to sync my iPhone 4 in 1 month and am freaking out about p

    Device not recognized in iTunes for Windows
    I wasted about 1.5 hours with Apple on this issue. It all started happening after I updated to the latest version of iTunes. I haven't been able to sync my iPhone 4 in 1 month and am freaking out about possibly losing my pictures, video, text messages and music.
    Windows XP user.
    Any help will be greatly appreciated.
    iPhone 4, iOS 5.1.1

    If might be helpful if you actually told us what the problem is.

  • BELKIN usb wireless FSD9050 device not recognized by IMAC G4 800

    Below is a thread from another group that I was advised to post here. If anyone knows of a solution or work around, it is appreciated.
    Thanks
    Topic : Belkin Not recognizing
    This question is not answered. "Helpful" answers available: 2 . "Solved" answers available: 1 .
    Reply to this Topic Subscribe to this Topic Back to Topic List
    Replies : 14 - Last Post : Nov 30, 2007 6:32 AM by: real_tt
    JakeHebert
    Posts: 4
    Registered: Sep 19, 2007
    Belkin Not recognizing
    Posted: Sep 19, 2007 9:04 PM
    Reply Email
    I bought the Belkin Wireless usb Mimo F5D9050 and it worked amazing with my Ibook G3 800Mhz.. but then it started to occasionally not work until i would eject it and reconnect it a few times.. Now no matter how many time si reconnect it it will not work... ive tried to re-install the belkin but still no luck.. and so i plugge dit into my Windows pc and it worked fine... What could this be! im going nuts
    Ibook G3 800 Mhz Mac OS X (10.3.9)
    Ronda Wilson
    Posts: 13,597
    From: The cornfields of Nebraska
    Registered: Feb 2, 2003
    Re: Belkin Not recognizing
    Posted: Sep 19, 2007 9:39 PM in response to: JakeHebert
    Reply Email
    Hi, Jake. Welcome to Apple Discussions.
    It's possible that your AirPort card has fizzled out on you. AirPort card failure doesn't happen very often, but it happened to me once, and it was very frustrating.
    We diagnosed what was wrong with mine by my husband swapping his AirPort card with mine. Then my iBook would connect, but his wouldn't, so we knew it was the card.
    Will the iBook work on any wireless network? Do you have someone with whom you could swap cards to see if that's the problem?
    Possible sources for replacing the original AirPort card (links last checked 8/19/07):
    http://www.dvwarehouse.com/Apple-Original-AirPort-Wireless-Card-802.11B-p-31366. html
    http://www.synaptech.com/catalog/index.php?mainpage=index&cPath=4953
    http://www.powerbookguy.com/xcart/catalog/Airport-Cards-price0-p-1-c-507.html
    http://www.expercom.com/productdetail.html?PRODUCTID=305851
    http://www.macrecycling.com/ibook-g3-c-18.html
    http://techrestore.com/xcart/product.php?productid=16174
    eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
    JakeHebert
    Posts: 4
    Registered: Sep 19, 2007
    Re: Belkin Not recognizing
    Posted: Sep 20, 2007 1:40 PM in response to: Ronda Wilson
    Reply Email
    well. no i have no airport card, and never have had one.. this wirless card is a usb plug-in one and .. it is recognized by every compute ri plug it into except the on ei need it for.. yet the one thats not recognizing it now USED to recopgnize it not even 2 weeks ago!... its realllyy frustrating... i mis susing my ibook lol
    Ibook G3 800 Mhz Mac OS X (10.3.9)
    Ronda Wilson
    Posts: 13,597
    From: The cornfields of Nebraska
    Registered: Feb 2, 2003
    Re: Belkin Not recognizing
    Posted: Sep 20, 2007 3:12 PM in response to: JakeHebert
    Reply Email
    Have you tried using the other USB port? If neither port works, try plugging in a USB mouse to see if it works to confirm that your USB ports aren't damaged.
    Have you installed any new software? Maybe a Security Update or something similar? Sometimes that will break functionality of third-party drivers.
    You may need to go to the website of the manufacturer of the USB wireless device to see if an updated driver is available.
    eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
    JakeHebert
    Posts: 4
    Registered: Sep 19, 2007
    Re: Belkin Not recognizing
    Posted: Sep 20, 2007 4:11 PM in response to: Ronda Wilson
    Reply Email
    mmm.. Both usb ports work fine with my wireless mouse... i will have to talk to a tech of Belkin.. but i hate that because i already had to once before... bahh... but i did search for a new updated version of the driver for the ** thing.. but no such luck.. I dont think any new software has been installed though ... i appreciat eyour help though Ronda!
    Ibook G3 800 Mhz Mac OS X (10.3.9)
    Ronda Wilson
    Posts: 13,597
    From: The cornfields of Nebraska
    Registered: Feb 2, 2003
    Re: Belkin Not recognizing
    Posted: Sep 20, 2007 5:57 PM in response to: JakeHebert
    Reply Email
    You're most welcome.
    What is the model number of the adapter?
    eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
    JakeHebert
    Posts: 4
    Registered: Sep 19, 2007
    Re: Belkin Not recognizing
    Posted: Sep 20, 2007 6:24 PM in response to: Ronda Wilson
    Reply Email
    umm its um f5d9050 the 3001 series... its HUGE lol... but it USED to work like a dream.. baah
    Ibook G3 800 Mhz Mac OS X (10.3.9)
    Ronda Wilson
    Posts: 13,597
    From: The cornfields of Nebraska
    Registered: Feb 2, 2003
    Re: Belkin Not recognizing
    Posted: Sep 20, 2007 8:10 PM in response to: JakeHebert
    Reply Email
    When did you buy it, Jake?
    There is a driver that was released on June 19, 2007.
    http://www.belkin.com/support/article/?lid=en&pid=F5D9050&aid=5925&scid=0
    Even if this is the one you have installed, you may want to reinstall it.
    Good luck.
    eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
    real_tt
    Posts: 4
    Registered: Nov 29, 2007
    Re: Belkin Not recognizing
    Posted: Nov 29, 2007 6:13 PM in response to: JakeHebert
    Reply Email
    Did this one ever get a real response. Mine is doing the same thing and the machine will not recognise that the usb is even plugged in. Any help is appreciated
    Mac OS X (10.5.1)
    Ronda Wilson
    Posts: 13,597
    From: The cornfields of Nebraska
    Registered: Feb 2, 2003
    Re: Belkin Not recognizing
    Posted: Nov 29, 2007 6:21 PM in response to: real_tt
    Reply Email
    Hi, and welcome to Apple Discussions.
    Since Jake hasn't posted in over two months, either that driver worked for him, he found the answer elsewhere, or he gave up. Since he hasn't posted back, we have no way of knowing.
    What model computer do you have?
    eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9, MacBook 2.0/2 GB/10.4.x
    real_tt
    Posts: 4
    Registered: Nov 29, 2007
    Re: Belkin Not recognizing
    Posted: Nov 29, 2007 6:35 PM in response to: Ronda Wilson
    Reply Email
    I MAC G4 and I have tried every driver listed on the forums with no success
    it states to go to the network in system pref. to set up device
    there appear to be no way I can figure out how to add the usb device
    any help is appreciated
    Mac OS X (10.5.1)
    Ronda Wilson
    Posts: 13,597
    From: The cornfields of Nebraska
    Registered: Feb 2, 2003
    Re: Belkin Not recognizing
    Posted: Nov 29, 2007 10:29 PM in response to: real_tt
    Reply Email
    Since you're running Leopard, I surmise that your iMac takes the AirPort Extreme card?
    May I ask why you don't just get one of those? As I post this, the Apple Store has a refurbished one for $29.00.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=%2 2extreme+card%22
    eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9, MacBook 2.0/2 GB/10.4.x
    real_tt
    Posts: 4
    Registered: Nov 29, 2007
    Re: Belkin Not recognizing
    Posted: Nov 30, 2007 5:52 AM in response to: Ronda Wilson
    Reply Email
    I am not running Leopard... using 10.4 and I already own the product. It is suppose to work and there is no reason to purchase another unit. All I need to understand is how to make the IMac recognize the USB device or how to configure the unit. Others have stated in this and other forums that they have used this unit with success.
    Thanks for address this specific issue.
    Since you're running Leopard, I surmise that your iMac takes the AirPort Extreme card?
    May I ask why you don't just get one of those? As I post this, the Apple Store has a refurbished one for $29.00.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=%2 2extreme+card%22
    Mac OS X (10.5.1)
    Ronda Wilson
    Posts: 13,597
    From: The cornfields of Nebraska
    Registered: Feb 2, 2003
    Re: Belkin Not recognizing
    Posted: Nov 30, 2007 6:06 AM in response to: real_tt
    Reply Email
    Your specifications at the bottom of your post state that you're running Mac OS X 10.5.1?
    You may want to post in the Internet and Networking your iMac (Flat Panel) Forum. Maybe someone there can help you out. (You've posted in the iBook G3 Forum.)
    eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9, MacBook 2.0/2 GB/10.4.x
    real_tt
    Posts: 4
    Registered: Nov 29, 2007
    Re: Belkin Not recognizing
    Posted: Nov 30, 2007 6:32 AM in response to: Ronda Wilson
    Reply Email
    I am using a laptop to connect to the internet not the machine that I am writing about. If I could do that I would not need any help. I will check out the other forum but this thread is on topic.
    Mac OS X (10.5.1)

    The information in your thread references an iBook quite a lot but the title of this post says iMac so I going to assume that you are trying to use this device with an iMac.
    It is also unclear what version of the Mac OS you are using.
    Let's start by stating the fact that these USB networking networking devices are not inherently supported by the Mac OS. Therefore they need drivers. These drivers are usually fragile and only work with a well defined version (or versions) of the Mac OS. Anytime that you make any upgrade to the Mac you are able to create an incompatibility with the driver and the device.
    The Belkin F5D9050 does have some Mac OS drivers available at this link.
    You should uninstall/remove the current driver for this device.
    Restart your iMac.
    Download and install the appropriate driver for the version of Mac OS on your iMac.
    Restart your iMac.
    If that doesn't work, either get the original AirPort card for the internal wireless slot in the iMac or get an Ethernet wireless adapter. An Ethernet wireless adapter requires no drivers and therefore will work with any Ethernet device.

  • GPIB-USB-B device not recognized by Windows XP

    I am using an HP Compaq nx9010 notebook with Windows XP Pro. When I plug in the the GPIB-USB-B, I get an error message telling me that 'The Device has not been Recognized'. I hjave followed all the instructions and have updated the bios and drivers of the notebook, but to no avail. I have uninstalled and reinstaleld the drivers several times to no effect. I have also tried running the device on an older Windows 98 PC, but the interface is not recognized there either! Is it broken?

    Hi Andrew,
    It's Pete from NIUK Tech. support department here. From what you've described it does sound like there may be something wrong with your product.
    Firstly, I would just like to make a couple of checks to make sure. If it is broken, we can then organise for it to be repaired/replaced.
    1. Has the GPIB-USB-B ever been working. i.e. how long have you had it, was it working when you got and has since stopped working or has it never worked.
    2. Are you plugging in the GPIB-USB-B before the computer is switched on. This shouldn't actually matter as it is a plug and play device. It would just be useful to know if it works when you switch the computer on with the device plugged in.
    3. I know you've tried it on a couple of computers with differen
    t operating systems, have you also tried different USB plug and play devices on the same USB port as your plugging this device into.
    These questions are just to cover all the bases before we send it back to the factory for repair. If we do need to RMA the device then I will need to speak to you in person to get some more details. If and when this is needed, it would probably be easier for you to either give me your e-mail address or phone into the department and ask for me.
    Anyway, if you get back to me with the answers to these questions then we can carry on from there.
    Best regards,
    Peter H
    Applications Engineer.
    National Instruments.

  • USB Audio Device Not Recognized by Stream 7 tablet

    Half the reason I bought the Stream 7 was to use it has a music player with my iBaso D2 USB Audio DAC Headdphone Amp.
    The device is recognnized by my Win 8.1 desktop and every other computer I've plugged it into.  Why it is not recognized as an audio playback device is beyond me.  I've tried all of the suggestions that I've been able to find on the net without any luck.  Is therte some reason why this function has been disabled on the Strwea 7?
    This question was solved.
    View Solution.

    Problem Solved!  
    It turned out to be a combination of the usb cable and the OTG USB hub.  On my desktop the iBaso was cable specific as to the device being recognized.  When I tried the working cable witht the OTG hub on the Stream 7 it failed as usual.  But when I tried the cheap monoprice adapter it worked.
    The usb audio solves the horrible sound problem with the Stream 7 for anybody who is lookiing for a Fix.
    The OTG hub works with a mouse and  a mSata drive perfectly but not with the iBAso DAC.  
    Thanks to everyone who replied for keeping me trying.  

  • External USB Hard Drive not recognized on iMac HELP!!

    I am currently using a i5 iMac running Lion 10.7.5
    I have recently partitioned a Verbatim USB external hard drive and uploaded all my footage from a wedding. This was done with no problems and the QT videos could be opened from the hard drive.
    A few weeks later, the hard drive does not show up in my finder. BUT it is recognized in disk utility. Here is a screen shot;
    So first I ran "Verify" and it told me to repair disk. After clicking on Repair, I got this;
    It is giving me the error message "Invalid B-Tree node"
    Here is more info on the hard drive;
    Name : Hitachi HTS545032B9A300 Media
              Type :           Disk
              Partition Map Scheme :           Master Boot Record
              Disk Identifier :           disk1
              Media Name :           Hitachi HTS545032B9A300 Media
              Media Type :           Generic
              Connection Bus :           USB
              USB Serial Number :           091004B3066D
              Device Tree :           IODeviceTree:/PCI0@0/EHC2@1A,7
              Writable :           Yes
              Ejectable :           Yes
              Location :           External
              Total Capacity :           320.07 GB (320,072,933,376 Bytes)
              Disk Number :           1
              Partition Number :           0
              S.M.A.R.T. Status :           Not Supported
    Can someone give me a step by step on how to get the hard drive working again? It would mean the world to me as this footage is priceless and irreplaceable.
    OR can you refer me to someone (Geek Squad? Apple Store?) that might be able to help me out?
    Thanks in advance!

    The error message invalid b-tree node size indicates that the directory on the disk is corrupt. The way that it can be repaired is to reformat as disk utiltiy says.
    It is recommended that the data be backed up first before either of this solution are done.
    Since it is not be recognized by the sytem at all it does sound like you can back it up now.
    Do you have a backup?
    If you don't there is every chance you may lose all your data.
    You can check to see if a data recovery service can recover any data for you. If you go that route you are looking at spending $$$$
    Allan

  • USB 2 devices not recognized on Master Farm Mainboard

    I have a few problems with a MSI E7210 Master FARM motherboard.
    One of these problems is is that I cant use USB 2 Sticks once the Intel drivers are installed. The USB ports on the back work. But on the front it gives an error Unrecognized USB device. Before I install the intel drivers the USB ports on the front work but only in 1.1 mode. I have clear the cmos but it did not help. I'm also missing an menu in the BIOS PNP/PCI Configuration. (See link)
    Missing PNP/PCI Configuration
    Due missing this options I can't reset the ESCD Configuration data.
    I'm really getting a headache and I'm not getting happy with this board. I have made a call to MSI USA with this problem about the missing menu option and the man told me its by design. I hope there is someone here in the forum who has good connections with MSI people so that they could look at this problem. I mustn't be the only one in the world with this problem.

    For OS like Win2K or WinXP, you've to update to Service Pack 4 for Win2K and Service Pack 2 for WinXP to get USB 2.0 to work.

  • IOS : Device not recognized in iTunes for Windows

    During the update from my ipad from ios7.02 ==> 7.03 update stopped .
    I recoverd the ipad via an another PC
    after update itunes didn't reconize ipad; iphone and ipod
    i followed several times the procedure : http://support.apple.com/kb/TS1538?viewlocale=en_US
    result is still the same
    the aonly thing that i didn't succeeded is the remove of following map after deinstallation the Apple Programs ( in the right order)
    In most cases, removing iTunes and its related components from the Control Panel will remove all supporting files belonging to those programs. In some rare cases, files may be left behind. After following the previous steps, you should confirm that the following files and folders have been removed. If any are left behind, remove them now:
    C:\Program Files\Bonjour
    C:\Program Files\Common Files\Apple\
    C:\Program Files\iTunes\
    C:\Program Files\iPod\ 
    can someone give me a definitive and proper solution?
    thanks
    Stef

    During the update from my ipad from ios7.02 ==> 7.03 update stopped .
    I recoverd the ipad via an another PC
    after update itunes didn't reconize ipad; iphone and ipod
    i followed several times the procedure : http://support.apple.com/kb/TS1538?viewlocale=en_US
    result is still the same
    the aonly thing that i didn't succeeded is the remove of following map after deinstallation the Apple Programs ( in the right order)
    In most cases, removing iTunes and its related components from the Control Panel will remove all supporting files belonging to those programs. In some rare cases, files may be left behind. After following the previous steps, you should confirm that the following files and folders have been removed. If any are left behind, remove them now:
    C:\Program Files\Bonjour
    C:\Program Files\Common Files\Apple\
    C:\Program Files\iTunes\
    C:\Program Files\iPod\ 
    can someone give me a definitive and proper solution?
    thanks
    Stef

  • Ipod Touch 4th gen, "usb device not recognized", doesnt work on other computers either. Any assistance available? Thanks.

    My ipod isnt recognized by windows! xP still charges though, but doesnt do so on an xbox 360 either. works perfectly fine, but isnt recognized on my windows 7 laptop or another one i tried syncing it on. any help or suggestions? thank you for reading

    - Try another cable
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    and for the computer in queston
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • USB device not recognized win7 iPod Touch 1g

    My computer will not recognize my 1st Gen Ipod Touch 8gb when I plug it into my USB port. I get a message USB Device Not Recognized. I've tried everything from resetting the iPod, uninstalling and reinstalling iTunes and all other Apple related programs, to fiddling with the settings in my Device Manager. It will only recognize it as an Unknown Device, not even an Apple device.
    What should I do? I just got this thing through a trade, it's clean, wifi works fine, in great condition. I just don't know what to do! It won't show up in iTunes at all, won't show up as a mass storage device, nothing. I am running Windows 7. I've also tried using different cords, different usb ports, and another computer. None of that made a difference.

    Haveylu looked ere:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    Pay particular attention to the parts concerning the the Apple Mobile Device service.

  • What do I do when I plug in my iPod to charge and it says "USB Device not recognized"?

    What do I do when I plug in my iPod to charge and it says "USB Device not recognized"?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

Maybe you are looking for

  • How to check a checkbox field value in fw9 PDF form

    Hi, I got a PDF given form IRS (http://www.irs.gov/pub/irs-pdf/fw9.pdf). While creating a widget to this pdf form to sign it, I merged the custum data to those PDF form fields using API setMergeFields. All the data fields are merged fine except the c

  • Threaded swing applet

    Hi, I need to write an applet that shows the results of a database query on a JTable. The query will be executed every second (only a few registers are retrieved from a mySQL db), and if a change is detected, the JTable must be updated. I've been rea

  • Safari crashing since 10.9.3 update!

    Process:     Safari [505] Path:        /Applications/Safari.app/Contents/MacOS/Safari Identifier:  com.apple.Safari Version:     7.0.3 (9537.75.14) Build Info:  WebBrowser-7537075014000000~5 Code Type:   X86-64 (Native) Parent Process:  launchd [200]

  • About format . Please help me!

    hello! admin! environment: 2 X E2900 + 2 X Brocade fc switch + 1 X SE6130 system:solaris10U2;cluster 3.1;userd MPXIO Two machine hostname:one is systong ,the other is synbak. At synbak execute format is Normal.But at systong execute format #format Se

  • Mac Address Tracing - CatOS

    I have noticed a lot of bad traffic coming from one particular computer on the network. Normally not a big deal, I found the MAC Address in my DHCP Table, logged into a switch, did a 'sh mac-address-table address <mac address>', found what port it wa