USB memory card reader not working since latest security update

Hi, I have an iApp CR-e500 multi-format memory card reader; worked great prior to the latest security update. Now every time I plug it in I get the following errors in the console:
Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.818 AppleUSBEHCI[0x1b4d800]::Found a transaction past the completion deadline on bus 91, timing out!
Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.826 AppleUSBEHCI[0x1b4d800]::DoIOTransfer - error 0xe000404f queueing request
The reader works fine on my office Windows laptop and my USB pendrive still works on my Mac, so the USB ports appear to be functional; they just don't like this thing anymore.
Was there a USB driver change? If so is there anything I can do to sort this? I suppose I could just buy a new card reader if someone can confirm one that works with the latest security update of 10.4.11, that would be great.
Alternatively if Apple could please loosen up whatever they tightened in their USB drivers that would be nice as well...

Disregard. Looks like it's the memory card I'm trying to mount; not working on the Windows machine either.
Sorry!

Similar Messages

  • In my macbook pro hdmi, usb & SD card reader not working

    In my macbook pro hdmi, usb & sc card reader not working.
    i have tried the SRM reset done, till not working started.
    Could you please resolve this problem,

    Welcome to Apple Support Communities
    Simply take it to an Apple Store or reseller if it's in warranty. Your Mac will be repaired or replaced for free because it looks a hardware problem rather than a software issue.
    If it's not in warranty, hold Command and R keys while your MacBook is starting up, and reinstall OS X. If it doesn't work, you can't do much more to solve the problem

  • Memory card reader not working

    Compaq Presaro CQ3000 Series Model CQ3420AN Memory card reader not reading any SD cards.
    Where can I find download for original driver.
    This question was solved.
    View Solution.

    http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/Memory-Card-Reader-not-uploading/m-p/1265779...
    Here's a page that might help you resolve your problem if you haven't assigned a drive letter for your portable card readers.

  • Broadcom USB Smart Card reader not working

    After upgrading my Vista Business SP2 (32-bit) to Windows 7 Ultimate RC (32-bit) my Broadcom USB smart card reader does not work any longer (Dell Latitude E6400 with built in smart card reader).
    The newest available driver from dell support was already tested (Broadcom, driver date 09/23/2008, version 1.0.0.1, digitally signed WHQL, released by dell in March 09), but the device can not start (Error code 10) with Windows 7.
    With the Microsoft WUDF Driver (Usbccid, driver date 06/21/2006, version 6.1.7100.0) the device starts but whenever I insert my smart card an additional device is detected (other device - smart card) but no driver found - Error message is: The drivers for this device are not installed. (Code 28).
    What else can I try to get this reader working again (with vista sp2 the smart card reader was working fine with the broadcom driver)?

    I have also an USB card reader that works fine on XP PCs but Win7 does not recognise it, can msft make a sd reader driver that works pls.
    Hi
    Sorry, but the way the industry works is that Microsoft develops Windows and Hardware manufacturers develop drivers for their products. Microsoft does maintain a complete division (MSDN) that is dedicated to assisting hardware and software manufacturers in developing their products for compatibility with Windows.
    All of the drivers that are contained on the Windows installation disk and on Windows Update are placed there by the manufacturers of the devices. This is a service that Microsoft provides to help these manufacturers to distribute their drivers.
    What you can do.
    1. Check with the computer manufacturer for updated drivers for that device. This is your best source, since the computer manufacturer builds, tests, and sometimes develops their own, custom drivers to work with the hardware on their PCs.
    2. Try to determine the name and manufacturer of the device using Device Manager and MSInfo32. Once this information is found, try to find that manufacturers website and look for the latest compatible drivers.
    3. Check to see if there are any users forums on the PC manufacturers or device manufacturers websites. Ask there about any known issues with this particular hardware device or if the device is no longer supported.
    4. If the drivers are found but are only available for previous versions of Windows, install the drivers using the Windows Compatibility Mode. HOW TO: Install a Hardware Device Driver using Compatibility Mode
    Right now, we are in a unique situation since we are using an operating system that is still in the pre-release phase. Many hardware/software manufacturers will be ofrficially supporting their products for Windows 7 until after the General Availability date of October 22, 2009.
    Hope this helps.
    Thank You for using Windows 7
    Ronnie Vernon MVP

  • HP Envy Touchsmart 15-J104sa Memory Card Reader not working

    I took delivery of an HP Envy Touchsmart 15-J104sa running Windows 8.1 this week and the internal memory card reader isn't working. It doesn't recognise any SD cards (I've tried more than one) and continues as if nothing has been inserted; showing no error messages. All of the cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver update software (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) every time an SD card is inserted; this must be done with the card in the reader. If the software is run and then the card is inserted nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it isn't recognised and the process has to be restarted and the driver reinstalled even though nothing has changed.
    Can somebody please help me with this issue or I will have to return the laptop to HP. I do a lot of photography so being able to read an SD card quickly and reliably is extremely important for me; it's not a problem I expected from a brand new laptop straight out of the box.
    Thank you all.
    This question was solved.
    View Solution.

    Unfortunately non of the driver updates solved the problem but a BIOS update through the HP Support application seems to have remedied the issue. Whilst I appreciate there were no specific drivers available I find it hard to accept that HP should be able to release a model where they know the hardware will not be fully supported by the OS and in this case not function.

  • Nokia 3110C Memory Card reader not Working

    Pls, I need help as my Nokia 3110 classic is no longer reading my memory card and even putting a working memory card makes no difference. can someone tell what to do as i am confused. thanks

    The phone is working perfectly now adn i would not like a surprise like my two others "wich i don't trust, they manage to destroy two of my phones more then they ware, at two diferent services" if there is something to do by myself i will do it, if not i prefere to keep it like this then not having it at all, i have tried formating the memory cards on other phones, on a nokia 6131, moto v630, and nokia 3250, still not working, i had a problem allmost the same with a Mp3 player an all i had to do was put two pins in short, but i don't know if there is something like this on the 7373, and even if there is i don't know wich pins to short. Thanx anyway.

  • Third-Party USB to Ethernet Adapter not working since 10.8 updated

    Hi I have a third-party USB to Ethernet adapter. Since the update of mountain lion the adapter does not work.
    Is there a driver or something I can do to make it work?
    Thanks

    USB not so good, this very good.
    Thunderbolt to Gigabit Ethernet Adapter

  • Keyboard, Trackpad and USB on Mac Air not working with latest OS update

    My 2009 Mac Air after the last OS update, the only thing that seems to work now is the power button. The USB port, Keyboard and trackpad all dead. Help!

    Reset PRAM.   http://support.apple.com/kb/PH18761
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • IMovie Preview Not Working since latest Firmware Update (11/14/2006)

    I was working on an iMovie project without incident until an automatic Firmware update was completed. Since the update, the editing preview function of iMovie is a black screen. The movie plays, but when you attempt to edit the Ken Burns effects, etc ... the preview screen is black so you are unable to edit a viewable screen. Strange ... anyone else - post firmware update issues on the MacBook Pro?

    (Quoting Karl Petersen here:)
    There's a bug in iMovie 6 that makes it impossible to re-edit (Update) photo clips previously imported with the Ken Burns checkbox ON. The source photo, normally stored in the Media folder of the project, is (inappropriately) discarded when you empty the iMovie trash. The clips Update as black clips and the preview is usually black too, if I recall.
    The workaround is to 1) drag the photo from the iMovie trash to the iMovie Clips pane; or 2) never empty the iMovie trash.
    Sue

  • Pavilion dv6 sd card reader not working

    I have searched the boards and have not found an answer to my built in SD card reader not working any more.  It worked fine until a couple weeks ago. When I go to "my computer",  the sd card does not show up as an available drive. I have tried several cards with no luck. The cards work fine when I use a USB card reader, just not the built in one.
    I checked the driver in device manager - at least the one I believe is the correct one - Realtec PCIE Card Reader.
    Any other ideas? It is a pain having to carry around an extra card reader. Thanks for the help
    rv9a
    This question was solved.
    View Solution.

    Good morning rv9a.  
    Prior to the uninstall did the computer make a noise to indicate it recognized the card when you put it in?
    You should go ahead and reinstall the specific driver for the card reader just to make sure that doesn't have an effect on the issue.  Here is the link for Windows 7 and here is the link for Windows 8.
    Another possibility is the the Plug and Play service is deactivated.  Try the following to check.
    Press the Windows+R keyboard shortcut.  
    Type "services.msc" into the box and click okay.
    Scroll down until you find "Plug and Play" in the list.
    Ensure that it is started.  If it is not right-click on the service and select Start or Enable.
    I'll keep an eye out for your response; have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Z61t SD card reader not working?

    z61t SD card reader not working?
    Tried the Vista driver and still not working.
    Same for camera.
    I am running Windows 7 64bit and using TVSU v4.0 as well as manual attempts to update.

    I am running windows 7 home 32 bit and can not get the sd card reader driver to load either.  Any help?

  • Card reader not working out the box scr 3500?

    cac card reader not working out of box scr3500 help

    Welcome to discussions Kevin!
    I'm sorry to hear that first of all make sure that there is nothing sick on the eye of the camera it self, after that how is the lighting on the room that the computer will be set up? did the green light came on when you're trying to use iSight? i'm asking because the same thing happen to me but it was nothing but bad lighting in my office. If this doen't help call apple asap they should replace your computer with out a problem. Hope this helps good luck!
    Miguel

  • I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

    I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

    Downgrading the iOS is not supported by Apple.Have yo tried:
    - Backing up and restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    - Go to the OverDrive support site

  • Drag and Drop not working since last software update

    Drag and Drop not working since last software update - this is occuring on Outlook for the mac and I just tried moving  an icon on the doc and the same thing occured.  YOu can drag but the items will not drop.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Wifi not working after latest iOS update

    wif not working after latest iOS update 7.0.4.  Any suggestions?

    Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

Maybe you are looking for