USB microphone recording

Hi, I recently picked up the HpX360 and there is a problem when I am recording with my Samson Go Mic (USB microphone). There is constant static in my recordings. I know that it is not background noise because this static is occuring when my recording volume is on 0. Secondly, I know it is not the microphone's problem because the microphone works fine on my friend's laptop. I've tried uninstalling and reinstalling both the sound and samson go mic drivers. I've tried using different USB ports. I've tried changing the sample rate and the bit depth, but the static is still there. I'm wondering if it is an internal error with my laptop? Any help would be greatly appreciated.

Problem 1. You can't normally alter the level of a USB mic via the usual Windows Sound Mixer page since USB audio goes direct digitally into Audition not via your on board analogue sound card.
Problem 2 is a fairly common problem using USB audio devices with laptops. May go away if you run the laptop from it's internal batteries rather than from the mains supply.

Similar Messages

I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button. What's wrong?

I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button and won't let me select an input for the audio track on the inspector panel. What are some possible solutions.

Certain M-Audio USB devices (along with some other USB2 class compliant devices that don't use drivers) no longer work with Logic Pro X 10.0.5
At this time it is unknown as to why this has happened. Nor is it known if Apple will need to fix it or if it is up to the Developers of said USB2 devices to remedy the problem.
In the mean time, assuming you made/could make backups prior to updating to 10.0.5.... the solution is to roll back to LPX 10.0.4...

High pitched noise when recording w/ M-Audio Producer USB Microphone

hello,
I have an M-Audio Producer USB Microphone. Recording with GarageBand, nothing else connected, using an the Apple AC power cord (three pronged ground).
When I record with it plugged into the USB port closest to my FireWire port there is a constant high pitched noise.
When I record with it plugged into the USB port furthest from the FireWire port there is no noise at all (as it should be).
What's wrong with my USB port closest to the FireWire?

I am having major problems with iMovie (and iDVD) ever since I upgraded to OS.X.10.5.6. I had to scrap my last promo-video. I am now recreating it very gingerly saving as I go but I am now stuck again. I am getting the digital audio screeching under my video clips when I extract the audio and under insert titles and transitions. Does this describe your 'crickets'?
I have clean video and audio signal from my camcorder. Check your cam' playback to verify. After three attempts I do have clean material in iMovie but cannot proceed until I resolve this issue. I ruined my last video when I extracted the audio and ended up with a garbled rumble which I could not reverse.
I have another question elsewhere regarding burning to DVD but I now need to resolve this before I can get to test the recommendations in the reply.
I hope I have helped focus your symptoms. I also hope there is an answer out there for this issue.
BTW, Canon ZR-60 Firewire
Cheers,
Denny

Blue Yeti USB microphone not working in ALSA/PulseAudio

Hi all,
I recently bought a Blue Yeti USB microphone. It is supposed to require no drivers for Windows and OS X, and so far, it works well under Windows, but I cannot seem to get it to function on Arch Linux. As fair warning, although I am relatively experienced with Linux, I don't know much about the internals of ALSA/PA --- up until now, it has just "always worked", so this is my first real foray into the area. I've tried for many days, with no success, to get this thing working.
So, let's start off first with my configuration.
I have a few audio devices:
An on-board audio solution that I don't typically use. For testing, I have connected an old, crappy pair of headphones, but normally I keep this disabled. It has one capture device. (Analog stereo [or 5.1/7.1/etc] duplex)
An external DAC that is connected via USB and is output-only. So, no capture devices on that. (Digital/IEC958 output)
The Blue Yeti itself, which is connected via USB and supports output (it has an internal DAC) as well as input. So, one capture device here. (Digital stereo output and analog stereo input???)
The HDMI-out stuff for nvidia, which I never use
Here is the output of "arecord -l":
**** List of CAPTURE Hardware Devices ****
card 1: Microphone [Yeti Stereo Microphone], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 2: ALC892 Alt Analog [ALC892 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Here is the the output of "arecord -L":
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Microphone
Yeti Stereo Microphone, USB Audio
Default Audio Device
front:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
Front speakers
surround40:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
IEC958 (S/PDIF) Digital Audio Output
sysdefault:CARD=PCH
HDA Intel PCH, ALC892 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
Here is the output of "aplay -l" (for completeness):
**** List of PLAYBACK Hardware Devices ****
card 0: Audio [USB2.0 High-Speed True HD Audio], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: Microphone [Yeti Stereo Microphone], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
If the output of "aplay -L" is needed, let me know, but it's not all that different from arecord -L.
Here is my /etc/asound.conf:
defaults.pcm.rate_converter "samplerate_best"
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
I don't remember where the bulk of that came from; maybe it was installed like that or maybe I put it in there. Here is another useful command showing non-commented-out/non-blank lines in the pulseaudio conf:
$ egrep -v '^;|^#|^$' /etc/pulse/*.conf
/etc/pulse/client.conf:autospawn=no
/etc/pulse/daemon.conf:exit-idle-time=0
/etc/pulse/daemon.conf:default-sample-rate = 192000
So, there's not much I've done there. Here's the contents of /proc/asound/cards:
0 [Audio ]: USB-Audio - USB2.0 High-Speed True HD Audio
CMEDIA USB2.0 High-Speed True HD Audio at usb-0000:00:1d.0-1.7, high speed
1 [Microphone ]: USB-Audio - Yeti Stereo Microphone
Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed
2 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7530000 irq 52
3 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf7080000 irq 17
And here's the contents of /proc/asound/modules:
0 snd_usb_audio
1 snd_usb_audio
2 snd_hda_intel
3 snd_hda_intel
Now, here is the output of "pactl list sources" (the Blue Yeti is last in the list):
Source #3
State: RUNNING
Name: alsa_input.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 192000Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: yes
Volume: front-left: 17972 / 27% / -33.71 dB, front-right: 17972 / 27% / -33.71 dB
balance 0.00
Base Volume: 6554 / 10% / -60.00 dB
Monitor of Sink: n/a
Latency: 610 usec, configured 100000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC892 Analog"
alsa.id = "ALC892 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7530000 irq 52"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:2"
device.buffering.buffer_size = "76800"
device.buffering.fragment_size = "19200"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC892"
alsa.components = "HDA:10ec0892,10438436,00100302"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-front-mic: Front Microphone (priority: 8500, not available)
analog-input-rear-mic: Rear Microphone (priority: 8200, available)
analog-input-linein: Line In (priority: 8100, not available)
Active Port: analog-input-rear-mic
Formats:
pcm
Source #11
State: RUNNING
Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 192000Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Latency: 0 usec, configured 100000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "2"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7530000 irq 52"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "2"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #15
State: RUNNING
Name: alsa_output.usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio.iec958-stereo.monitor
Description: Monitor of USB2.0 High-Speed True HD Audio Digital Stereo (IEC958)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 192000Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio.iec958-stereo
Latency: 0 usec, configured 100000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of USB2.0 High-Speed True HD Audio Digital Stereo (IEC958)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "USB2.0 High-Speed True HD Audio"
alsa.long_card_name = "CMEDIA USB2.0 High-Speed True HD Audio at usb-0000:00:1d.0-1.7, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.7:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.7/6-1.7:1.0/sound/card0"
udev.id = "usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0319"
device.product.name = "USB2.0 High-Speed True HD Audio"
device.serial = "CMEDIA_USB2.0_High-Speed_True_HD_Audio"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Formats:
pcm
Source #19
State: RUNNING
Name: alsa_output.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.iec958-stereo.monitor
Description: Monitor of Integrated Rate Matching Hub Digital Stereo (IEC958)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 9
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.iec958-stereo
Latency: 0 usec, configured 100000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Integrated Rate Matching Hub Digital Stereo (IEC958)"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "Yeti Stereo Microphone"
alsa.long_card_name = "Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.8:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/sound/card1"
udev.id = "usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone"
device.bus = "usb"
device.vendor.id = "b58e"
device.vendor.name = "Intel Corp."
device.product.id = "9e84"
device.product.name = "Integrated Rate Matching Hub"
device.serial = "Blue_Microphones_Yeti_Stereo_Microphone_REV8"
device.form_factor = "microphone"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-input-microphone-usb"
Formats:
pcm
Source #23
State: RUNNING
Name: alsa_input.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.analog-stereo
Description: Integrated Rate Matching Hub Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 9
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 17775 / 27% / -34.00 dB
Monitor of Sink: n/a
Latency: 949811526 usec, configured 100000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Yeti Stereo Microphone"
alsa.long_card_name = "Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.8:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/sound/card1"
udev.id = "usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone"
device.bus = "usb"
device.vendor.id = "b58e"
device.vendor.name = "Intel Corp."
device.product.id = "9e84"
device.product.name = "Integrated Rate Matching Hub"
device.serial = "Blue_Microphones_Yeti_Stereo_Microphone_REV8"
device.form_factor = "microphone"
device.string = "front:1"
device.buffering.buffer_size = "19200"
device.buffering.fragment_size = "4800"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Integrated Rate Matching Hub Analog Stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USBb58e:9e84"
module-udev-detect.discovered = "1"
device.icon_name = "audio-input-microphone-usb"
Ports:
analog-input-mic: Microphone (priority: 8700)
Active Port: analog-input-mic
Formats:
pcm
Honestly, I think that's about all of the configuration info I can give. Here are some screenshots of pavucontrol, though, in case you are not yet sated: http://imgur.com/a/ngyLl
Now, on to the debugging stuff. First: everything except Blue Yeti recording works. The external DAC works, the on-board audio (both input and output) work, using the DAC in the Blue Yeti to play music/monitor the microphone works (so it works as an output). The only thing that doesn't work is actual recording from the Blue Yeti itself.
When I try to record from the Blue Yeti with parecord -v, I get very strange behavior. Essentially, the "latency" of the microphone measured is exactly the same as the time it has been recording. That is, if it has been recording for 5 sec, then the latency is 5000000 usec. Also, if I try to record something in Audacity, I get no result except for a message box that says "Latency Correction has caused the recorded audio to be hidden before zero. Audacity has brought it back to start at zero." Also, pavucontrol doesn't show an input volume bar for the Blue Yeti, as in the above screenshots, whereas it normally will for microphones that are getting input. The Yeti is not muted, either, so it should be picking up ambient fan noise and such.
Does anyone have any ideas? Is there some configuration error I've made? Typically, this sort of stuff simply works out of the box for me, so I am somewhat stuck on what to do. Could it be a driver-level bug?

I'm not sure what you mean by "mixed with audio in Alsamixer". Can you clarify?
With that said, my problem did mysteriously fix itself after some update (presumably to alsa). Unfortunately, I noticed it in passing one day while I was changing the volume of something in pavucontrol, so I don't remember the exact update that caused it to work. But yes, my current setup does work now: I can listen to audio through my DAC and use the Yeti for recording. However, I have found that use of the Yeti crashes Google Hangouts, although it works perfectly in every other program I've tried.
As documentation, here is my current working setup (it is very similar to the above): in PulseAudio, the DAC is set to be a Digital Stereo (IEC958) output. The Yeti (called an 'Integrated Rate Matching Hub' in pavucontrol) is set to be an Analog Stereo Input. In the input devices section, I have the Yeti's volume set to around 58% (-14.31 dB), which is past the base volume a fair ways but produces decent levels for recording. The DAC's volume is set to 100% (0dB gain, the DAC takes care of the level). In alsamixer, I have the mic level for the Yeti set to 40.
Edit: This is a long-time-later edit, but let me say that when you have multiple USB audio devices, what USB hub and in what order they are connected seems to matter a great deal. If you can't get your Blue Yeti to work, try moving it to a different set of USB ports (controlled by a different controller) on your motherboard. This magically fixes the issue for me.
Last edited by rwiggins (2014-12-14 00:26:39)

Using USB Microphone With GarageBand iPad?

Hi, I have the Samson G-Track USB Microphone and have been using it with GarageBand for iPad (with a powered USB hub) and I was wondering if there is a way to enable "Monitor" so that when I speak into the microphone I can hear myself in the headphones? I have no problem recording with the microphone, I just can't hear myself when I'm recording. There are a few switches on the actual microphone that could control this or it could all be controlled from iPad itself, just looking for anyone who could help with this matter. Thanks!

I'm having the same problem trying to monitor my turntable recording via a USB phono amp connected via a USB hub to the photo connection kit.
Have you had any help with this yet?

Captivate 4 not detecting audio input from USB Microphone

I'm using a Logitech USB microphone in Captivate 4. When I try to calibrate it, Captivate 4 is not detecting any sound. It is set up properly. In the "audio settings" menu, this microphone is listed in the drop down list. I have selected it as the input device. However, when I try to "calibrate" this microphone, no audio is detectable. Captivate 4 is detecting the device, but not the audio input. I have double checked all the usual suspects--this microphone is selected as the default recording device. It does not use special software or drivers. It is designed to use the drivers in Vista. It works fine with other applications. I have made sure the input level is detectable. I've checked to make sure it is not muted. I have other microphones (non-USB cheapies) that work fine, but I can't get this specific USB microphone to work.
Suggestions?

Hi there
Have you tried what is on the page linked below?
Click here to visit the page
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

USB speaker used to solve "No Audio Device is Installed" problem...USB microphone ok too?

After trying all of the solutions that have been offered for this extremely common problem of losing sound, I purchased USB powered speakers...and they work great.
Today I purchased a USB microphone and I can't seem to get that to work properly. Should this microphone work without the internal sound working properly?

Correct, microphone it totaly seperate and doesn't depend on sound.
Check your own devices or Sound panel window and under the Recording tab make sure your microphone is listed and make sure it's the default Recording device. You can rightclick it and set as default.

Getting the USB microphone to appear in Live Meeting 2007

Optia AF camera under Vista, using Live Meeting 2007. The video works fine. But, neither Live Meeting nor Office Communicator lists the built-in USB microphones as a choice when configuring the audio. The only way I can get audio to work is by using the headphones and microphone connected to my sound card.
Strangely enough, the USB microphone works fine with Windows Sound Recorder if I set it as the default sound input device in the Windows sound control panel.
Anybody else have this problem and find a solution?

Performance tip: Keep the Desktop clutter-free (empty, if possible)
Mac OS X's Desktop is the de facto location for downloaded files, and for many users, in-progress works that will either be organized later or deleted altogether. The desktop can also be gluttonous, however, becoming a catch-all for files that linger indefinitely.
Unfortunately - aside from the effect of disarray it creates - keeping dozens or hundreds of files on the Desktop can significantly degrade performance. Not necessarily because the system is sluggish with regard to rendering the icons on the desktop and storing them in memory persistently (which may be true in some cases), but more likely because keeping an excessive number of items on the Desktop can cause the windowserver process to generate reams of logfiles, which obviously draws resources away from other system tasks. Each of your icons on your desktop is stored as a window in the window server, not as an alias. The more you have stored, the more strain it puts on the window server. Check your desktop for unnecessary icons and clear them out.
Keeping as few items as possible on the Desktop can prove a surprisingly effective performance boon. Even creating a single folder on your Desktop and placing all current and future clutter inside, then logging out and back in can provide an immediately noticeable speed boost, particularly for the Finder.
And it is why Apple invented 'Stacks' for Leopard.
Here is Apple's take on the subject:
http://www.apple.com/pro/tips/immaculate_desktop.html

Cannot hear USB microphone in headphone

I'm using the Logitech USB microphone which works fine for Skype and quicktime recordings. The problem is that I cannot hear the microphone in my headphones which makes it difficult to monitor the recording. The input volume level is working in System Prefs but I cannot hear the sound from the microphone. I also cannot record my side of Skype conversations with Wire Tap Pro since I cannot hear the audio from the USB microphone on the iMac. Any ideas?

Edward Long wrote:
Yes indeed, worked beautifully. Thanks for the prompt reply.
You're welcome anytime.
Glad to be of help.
Have Fun
Stefan

Samson C03U USB Microphone

For some reason, my USB microphone is not being recognized by Logic Express...I had it working before but now nothing? The only options I see under my Core Audio prefs are Internal Microphone and Line-In? Any ideas why the mic isn't working now even when record-enabling a track?
It seems to have disappeared after I changed the Core Audio settings.....I've changed them back and now the USB Audio Device won't disappear?
The strange thing is, it DOES work in GarageBand, and any other audio app I attempt to record audio with using the USB microphone, it works in everything except Logic Express...
Note: i've also tried installing a copy of Logic Express on my PPC Mac Mini G4, and the same thing happens - it works once, then if I change a setting in Core Audio, I only see the 2 options, not the Samson USB Device....
HELP!

You need to get it recognized in Audio/MIDI set up, and create an aggregate device.
This thread explains how:
http://discussions.apple.com/thread.jspa?messageID=2094732&#2094732
It seems to have disappeared after I changed the Core Audio setting
You may have changed the previously selected driver - that would do it.

USB microphone not working with AudioPublisher

Hi,
I have a voice chat feature in my application, in which I use AudioPublisher and AudioSubscriber.
The code is almost identical to the Audio.mxml example coming with the SDK.
I have a 'start voice chat' button that starts voice chat.
The problem I'm having is that a Macbook's built-in microphone works fine,
while an external USB microphone doesn't.
I selected the correct Microphone from the drop-down menu in the 'Adobe Flash Player Settings',
and the record volume bar also properly shows a non-mute green bar.
The headset I'm using is MX500i from Plantronics.
I don't think there's any problem with my code considering that it works perfectly with Macbook's microphone.
It'd be great if anyone has a solution to the problem I have.
Thanks,
Juho

I had the same problem. You need to check the device index of your USB mic.
In my case. I'm on a Mac OSX 10.6 system. I had four devices cataloged. With the last one being the USB mic.
Then set like so in your AS code audioPub.microphoneManager.micIndex = 3;
Remember, that the indexing is 0 based.
The sound framework make the assumption that the index is 0.
Hope that helps.

Using USB microphone with iBook

I have an iBook G4 and GarageBand 1.1. I recently bought a MicFlex USB microphone, but I can't make it record. I have set the system preferences and I can set the record level for the USB mic there, but GarageBand automatically uses the built-in microphone for recording. How do I change this?

No worries, now you're a little less new. Enjoy --Hang

Windows 7 not correctly recognize USB Microphone Samson G-Track

Hello Microsoft community members!
I have some problem with my Microphone Samson G-Track. I have installed on my Computer Windows 7 SP1.
After I connect USB Microphone over USB directly to PC, Windows 7 had been recognize it but into the START -> CONTROL PANEL -> SOUND -> RECORD
Microphone recognized like "line" not like "Microphone" device.
As a result many programs does not recognize this device as a microphone even Windows 7 wrote "Microphone not connected".
Need your assistance please.

The correct source of assistance with this situation is directly from
http://www.samsontech.com/samson/products/microphones/usb-microphones/gtrack/ as they are the manufacturer of the hardware and have sole responsibility for support of their product. This is not a Microsoft product and Microsoft does not provide support
for third party hardware.
I especially recommend you download and read
Samson G Track FAQ's V2.0
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

USB microphone for Vocals?

so i just picked up my macbook and im really liking garage band. Now usually im just a natural voice and acoustic guitar kind of guy but im going to give recording a shot. I've been doing some research and it seems like i have two options, buy a preamp and a nice condenser microphone orr a USB microphone. This sounds iffy to me.. I guess what im asking is will i get good sound quality out of it? Would it be better for me to to just get a mic. form the apple store like the blue bird or the snowball orrr just get a preamp from the local music shop or even the icicle xlr to USB converter thats also in the itunes store. Opinions of anyone who has had this predicament would be much obliged... thank you !!

half of it depends on your budget, the other half depends on your expectations. you should be able to get _really good_ results with a top quality USB mic like the ones shown here:
http://www.bulletsandbones.com/GB/Microphones.html
if you have a large budget, something like the Shure condenser in the above list is really top notch (my fav), however, if you then skimp on the interface, you'd be wasting money. iow, the cost has to include the mic AND an interface with excellent mic PREs, something like the PreSonus or Apogee interfaces here:
http://www.bulletsandbones.com/GB/Interfaces.html
personally, i'd suggest the USB mic as a starting point. you could always sell it in a year or two if you feel you've improved your recording skills enough to warrant it.

Fails to recognize USB microphone

Just yesterday I was able to use my Logitech USB microphone in the Voice Over mode. I could select it from the pull down menu within the Voice Over window and very easily record scratch narration. Today? Nada. It's not available as a choice in Voice Over. It's like the computer doesn't even see it. I have rebooted the computer and restarted Final Cut, all to no avail. I even plugged the device into the USB port in the back of the computer. Nothing works. Any idea on how I can get this mic to show up again in Voice Over so I can use it?
Thanks,
David

Okay, problem solved. First, thanks so much to everyone who responded to this cunundrum. I think the culprit was downloading software updates yesterday. Because, I just now downloaded another small batch of software updates. As soon as I rebooted after the download installations, I looked in the System Preference Control Panels under Audio. And behold! The computer recognized the USB mic device. When I opened my Final Cut project, the Voice Over window gave me the mic as a input device. It works now just fine. So, that software download stuff can cut both ways. It could be that I needed to download yesterdays batch before I had access to today's batch. But, just availing myself of yesterday's batch appears to have rendered the device unrecognizeable. the latetest update appears to have solved the problem. In any event, thanks again to everyone for trying to bail me out. Hopefully, my problem and this response can help someone else with a similar problem in the future.
David

USB microphone recording

Similar Messages

Maybe you are looking for