USB microphone

Happy New Year, all!
Question about my daughter's G4 running OS 9.2.2. Wanting to use the speech mode I bought a "drugstore" mic., plugged it in........and nada! Went out and got a gee-whiz looking made-for-Mac USB mic, plugged in to the back panel and at least got a reponse from the "Feedback" character which indicated it was listening, but NOW no sound out; and bit of investigating revealed that the Sound Control Panel showed speakers connected, although there aren't! But at least that explains no sound.
I've trashed the sound, finder and speech prefs but still nothing. Hhhheeeeelpp, please!
iMac G3 DV/SE Mac OS 9.2.x

Hi, Wargs -
Welcome to Apple's Discussions.
These Apple KBase articles may help -
http://docs.info.apple.com/article.html?artnum=18275 - Power Macintosh Computers: Supported Microphones
http://docs.info.apple.com/article.html?artnum=50629 - Mac OS 9: How to Solve Problems Using Spoken Commands
http://docs.info.apple.com/article.html?artnum=50598 - Mac OS 9: How to Use a Microphone With Your Computer
Many folk have found that using a device such a Griffin's iMic Adapter works well; it connects via USB, and allows the use of many different kinds of microphones.

Similar Messages

Logitech USB microphone does not work with OS 10.4.11

My logitech USB microphone was working fine, at one time. Now it does not function. In the sound prefs setup, it shows a level reading, as if it is hearing the input, but there is no output. I have tried every setting I could find in Audio Midi Setup as well, and nothing seems to work, and the "thru" option is not available. Can somebody help me here?

Hi stuntmedia, and a warm welcome to the forums!
See if it's the Mute button first...
http://www.macosxhints.com/article.php?story=20070714102116127
If that doesn't work, LineIn should...
http://www.rogueamoeba.com/freebies/

Blue Yeti USB microphone not working in ALSA/PulseAudio

Hi all,
I recently bought a Blue Yeti USB microphone. It is supposed to require no drivers for Windows and OS X, and so far, it works well under Windows, but I cannot seem to get it to function on Arch Linux. As fair warning, although I am relatively experienced with Linux, I don't know much about the internals of ALSA/PA --- up until now, it has just "always worked", so this is my first real foray into the area. I've tried for many days, with no success, to get this thing working.
So, let's start off first with my configuration.
I have a few audio devices:
An on-board audio solution that I don't typically use. For testing, I have connected an old, crappy pair of headphones, but normally I keep this disabled. It has one capture device. (Analog stereo [or 5.1/7.1/etc] duplex)
An external DAC that is connected via USB and is output-only. So, no capture devices on that. (Digital/IEC958 output)
The Blue Yeti itself, which is connected via USB and supports output (it has an internal DAC) as well as input. So, one capture device here. (Digital stereo output and analog stereo input???)
The HDMI-out stuff for nvidia, which I never use
Here is the output of "arecord -l":
**** List of CAPTURE Hardware Devices ****
card 1: Microphone [Yeti Stereo Microphone], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 2: ALC892 Alt Analog [ALC892 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Here is the the output of "arecord -L":
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Microphone
Yeti Stereo Microphone, USB Audio
Default Audio Device
front:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
Front speakers
surround40:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
IEC958 (S/PDIF) Digital Audio Output
sysdefault:CARD=PCH
HDA Intel PCH, ALC892 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
Here is the output of "aplay -l" (for completeness):
**** List of PLAYBACK Hardware Devices ****
card 0: Audio [USB2.0 High-Speed True HD Audio], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: Microphone [Yeti Stereo Microphone], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
If the output of "aplay -L" is needed, let me know, but it's not all that different from arecord -L.
Here is my /etc/asound.conf:
defaults.pcm.rate_converter "samplerate_best"
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
I don't remember where the bulk of that came from; maybe it was installed like that or maybe I put it in there. Here is another useful command showing non-commented-out/non-blank lines in the pulseaudio conf:
$ egrep -v '^;|^#|^$' /etc/pulse/*.conf
/etc/pulse/client.conf:autospawn=no
/etc/pulse/daemon.conf:exit-idle-time=0
/etc/pulse/daemon.conf:default-sample-rate = 192000
So, there's not much I've done there. Here's the contents of /proc/asound/cards:
0 [Audio ]: USB-Audio - USB2.0 High-Speed True HD Audio
CMEDIA USB2.0 High-Speed True HD Audio at usb-0000:00:1d.0-1.7, high speed
1 [Microphone ]: USB-Audio - Yeti Stereo Microphone
Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed
2 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7530000 irq 52
3 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf7080000 irq 17
And here's the contents of /proc/asound/modules:
0 snd_usb_audio
1 snd_usb_audio
2 snd_hda_intel
3 snd_hda_intel
Now, here is the output of "pactl list sources" (the Blue Yeti is last in the list):
Source #3
State: RUNNING
Name: alsa_input.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 192000Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: yes
Volume: front-left: 17972 / 27% / -33.71 dB, front-right: 17972 / 27% / -33.71 dB
balance 0.00
Base Volume: 6554 / 10% / -60.00 dB
Monitor of Sink: n/a
Latency: 610 usec, configured 100000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC892 Analog"
alsa.id = "ALC892 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7530000 irq 52"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:2"
device.buffering.buffer_size = "76800"
device.buffering.fragment_size = "19200"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC892"
alsa.components = "HDA:10ec0892,10438436,00100302"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-front-mic: Front Microphone (priority: 8500, not available)
analog-input-rear-mic: Rear Microphone (priority: 8200, available)
analog-input-linein: Line In (priority: 8100, not available)
Active Port: analog-input-rear-mic
Formats:
pcm
Source #11
State: RUNNING
Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 192000Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Latency: 0 usec, configured 100000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "2"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7530000 irq 52"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "2"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #15
State: RUNNING
Name: alsa_output.usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio.iec958-stereo.monitor
Description: Monitor of USB2.0 High-Speed True HD Audio Digital Stereo (IEC958)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 192000Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio.iec958-stereo
Latency: 0 usec, configured 100000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of USB2.0 High-Speed True HD Audio Digital Stereo (IEC958)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "USB2.0 High-Speed True HD Audio"
alsa.long_card_name = "CMEDIA USB2.0 High-Speed True HD Audio at usb-0000:00:1d.0-1.7, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.7:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.7/6-1.7:1.0/sound/card0"
udev.id = "usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0319"
device.product.name = "USB2.0 High-Speed True HD Audio"
device.serial = "CMEDIA_USB2.0_High-Speed_True_HD_Audio"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Formats:
pcm
Source #19
State: RUNNING
Name: alsa_output.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.iec958-stereo.monitor
Description: Monitor of Integrated Rate Matching Hub Digital Stereo (IEC958)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 9
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.iec958-stereo
Latency: 0 usec, configured 100000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Integrated Rate Matching Hub Digital Stereo (IEC958)"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "Yeti Stereo Microphone"
alsa.long_card_name = "Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.8:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/sound/card1"
udev.id = "usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone"
device.bus = "usb"
device.vendor.id = "b58e"
device.vendor.name = "Intel Corp."
device.product.id = "9e84"
device.product.name = "Integrated Rate Matching Hub"
device.serial = "Blue_Microphones_Yeti_Stereo_Microphone_REV8"
device.form_factor = "microphone"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-input-microphone-usb"
Formats:
pcm
Source #23
State: RUNNING
Name: alsa_input.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.analog-stereo
Description: Integrated Rate Matching Hub Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 9
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 17775 / 27% / -34.00 dB
Monitor of Sink: n/a
Latency: 949811526 usec, configured 100000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Yeti Stereo Microphone"
alsa.long_card_name = "Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.8:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/sound/card1"
udev.id = "usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone"
device.bus = "usb"
device.vendor.id = "b58e"
device.vendor.name = "Intel Corp."
device.product.id = "9e84"
device.product.name = "Integrated Rate Matching Hub"
device.serial = "Blue_Microphones_Yeti_Stereo_Microphone_REV8"
device.form_factor = "microphone"
device.string = "front:1"
device.buffering.buffer_size = "19200"
device.buffering.fragment_size = "4800"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Integrated Rate Matching Hub Analog Stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USBb58e:9e84"
module-udev-detect.discovered = "1"
device.icon_name = "audio-input-microphone-usb"
Ports:
analog-input-mic: Microphone (priority: 8700)
Active Port: analog-input-mic
Formats:
pcm
Honestly, I think that's about all of the configuration info I can give. Here are some screenshots of pavucontrol, though, in case you are not yet sated: http://imgur.com/a/ngyLl
Now, on to the debugging stuff. First: everything except Blue Yeti recording works. The external DAC works, the on-board audio (both input and output) work, using the DAC in the Blue Yeti to play music/monitor the microphone works (so it works as an output). The only thing that doesn't work is actual recording from the Blue Yeti itself.
When I try to record from the Blue Yeti with parecord -v, I get very strange behavior. Essentially, the "latency" of the microphone measured is exactly the same as the time it has been recording. That is, if it has been recording for 5 sec, then the latency is 5000000 usec. Also, if I try to record something in Audacity, I get no result except for a message box that says "Latency Correction has caused the recorded audio to be hidden before zero. Audacity has brought it back to start at zero." Also, pavucontrol doesn't show an input volume bar for the Blue Yeti, as in the above screenshots, whereas it normally will for microphones that are getting input. The Yeti is not muted, either, so it should be picking up ambient fan noise and such.
Does anyone have any ideas? Is there some configuration error I've made? Typically, this sort of stuff simply works out of the box for me, so I am somewhat stuck on what to do. Could it be a driver-level bug?

I'm not sure what you mean by "mixed with audio in Alsamixer". Can you clarify?
With that said, my problem did mysteriously fix itself after some update (presumably to alsa). Unfortunately, I noticed it in passing one day while I was changing the volume of something in pavucontrol, so I don't remember the exact update that caused it to work. But yes, my current setup does work now: I can listen to audio through my DAC and use the Yeti for recording. However, I have found that use of the Yeti crashes Google Hangouts, although it works perfectly in every other program I've tried.
As documentation, here is my current working setup (it is very similar to the above): in PulseAudio, the DAC is set to be a Digital Stereo (IEC958) output. The Yeti (called an 'Integrated Rate Matching Hub' in pavucontrol) is set to be an Analog Stereo Input. In the input devices section, I have the Yeti's volume set to around 58% (-14.31 dB), which is past the base volume a fair ways but produces decent levels for recording. The DAC's volume is set to 100% (0dB gain, the DAC takes care of the level). In alsamixer, I have the mic level for the Yeti set to 40.
Edit: This is a long-time-later edit, but let me say that when you have multiple USB audio devices, what USB hub and in what order they are connected seems to matter a great deal. If you can't get your Blue Yeti to work, try moving it to a different set of USB ports (controlled by a different controller) on your motherboard. This magically fixes the issue for me.
Last edited by rwiggins (2014-12-14 00:26:39)

Is there a known problem with USB microphones?

Background
OS X 10.5.8
Premiere Elements 9
Hardware Intel iMac
I use a USB mic with all my audio applications.
However, it appears that PrE doesn't see the mic for narration. I've set up the audio hardware preferences to use the Default System Input/Output but no recognition of the mic.
The mic works fine on all my other applications and is selected in system preferences to be the input of choice, and tests indicate it is recognized.
I changed the audio hardware selection in PrE to use the built in mic and it works as expected.
So I'm led to wonder if there is a problem with using a USB mic?
The documentation, referencing windows only, mentions plugging in a microphone to the microphone socket on the PC, not mention of a USB mic?
Any pointers to where I might find a solution?
Thanks

Thanks Neale, in particular for posting the images:
nealeh wrote:
To use my USB microphone (built in to my webcam) I go to Preferences> Audio Hardware and select "Premiere Elements Windows Sound" as the Default Device.
Then click ASIO settings and ensure your microphone is selected.
I believe I'm making a similar selection
I've tried all the selections. The built in system works but my external mic, when selected in system preferences as the default, is not recognized.

I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. I need all three for a podcast, any solutions?

I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. At first I thought maybe the third microphone was just defected or something but I tested the mic individually and it works fine. It'll let me use two Blue Yeti's and another microphone but not three Yeti's at once.

David Boroditsky wrote:
The problem is that the mac chokes on having 2 identical mics attached at the same time.
Ive had 2 identical USB AT2020 mics connected at the same time on both macbook pro and macbook Air.
The "Yeti" mics, are, lets say undesirable, and low to mid computer consumer mics.

Using USB Microphone With GarageBand iPad?

Hi, I have the Samson G-Track USB Microphone and have been using it with GarageBand for iPad (with a powered USB hub) and I was wondering if there is a way to enable "Monitor" so that when I speak into the microphone I can hear myself in the headphones? I have no problem recording with the microphone, I just can't hear myself when I'm recording. There are a few switches on the actual microphone that could control this or it could all be controlled from iPad itself, just looking for anyone who could help with this matter. Thanks!

I'm having the same problem trying to monitor my turntable recording via a USB phono amp connected via a USB hub to the photo connection kit.
Have you had any help with this yet?

How can you get a non-usb microphone to work?

So i've run into a few discussions on this topic, but never seen an answer to it. I have a non-usb microphone (A HyperX Cloud headset) that I want to use with my MacBook Pro. How can I do this? I'm assuming there is an adapter I can get for the microphone to work, right?

You will need a mic interface, you can get a pretty decent one for around $100, check this one out! http://www.amazon.com/Focusrite-Scarlett-Solo-Compact-Interface/dp/B00MTXU2DG/re f=sr_1_2?ie=UTF8&qid=1426555875&sr=8-2&k… or an adapter from http://www.amazon.com/IK-Multimedia-instrument-microphone-interface/dp/B00C68MZX E/ref=sr_1_1?ie=UTF8&qid=1426555978&sr=8… Sorry there is no other way around it.

Captivate 4 not detecting audio input from USB Microphone

I'm using a Logitech USB microphone in Captivate 4. When I try to calibrate it, Captivate 4 is not detecting any sound. It is set up properly. In the "audio settings" menu, this microphone is listed in the drop down list. I have selected it as the input device. However, when I try to "calibrate" this microphone, no audio is detectable. Captivate 4 is detecting the device, but not the audio input. I have double checked all the usual suspects--this microphone is selected as the default recording device. It does not use special software or drivers. It is designed to use the drivers in Vista. It works fine with other applications. I have made sure the input level is detectable. I've checked to make sure it is not muted. I have other microphones (non-USB cheapies) that work fine, but I can't get this specific USB microphone to work.
Suggestions?

Hi there
Have you tried what is on the page linked below?
Click here to visit the page
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

USB speaker used to solve "No Audio Device is Installed" problem...USB microphone ok too?

After trying all of the solutions that have been offered for this extremely common problem of losing sound, I purchased USB powered speakers...and they work great.
Today I purchased a USB microphone and I can't seem to get that to work properly. Should this microphone work without the internal sound working properly?

Correct, microphone it totaly seperate and doesn't depend on sound.
Check your own devices or Sound panel window and under the Recording tab make sure your microphone is listed and make sure it's the default Recording device. You can rightclick it and set as default.

Kernel refuses my usb microphone after update

I guess the latest (or one of the latest) kernel update crashed the usb driver for my Blue Yeti USB microphone, it doesn't show up anymore in pulseaudio and isn't shown as a recognized usb device anymore:
leandros@archlinux ~
% lsusb !7939
Bus 005 Device 014: ID 18d1:4ee2 Google Inc.
Bus 006 Device 008: ID b58e:9e84
Bus 006 Device 006: ID 046d:c068 Logitech, Inc. G500 Laser Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
The empty device seem to be my microphone, because if I unplug it I get this:
leandros@archlinux ~
% lsusb !7940
Bus 005 Device 014: ID 18d1:4ee2 Google Inc.
Bus 006 Device 006: ID 046d:c068 Logitech, Inc. G500 Laser Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
(I use a PS/2 keyboard)
Any ideas how to fix this? (without reverting to an old kernel build)
Last edited by Leandros (2013-02-25 20:00:32)

I guess the latest (or one of the latest) kernel update crashed the usb driver for my Blue Yeti USB microphone, it doesn't show up anymore in pulseaudio and isn't shown as a recognized usb device anymore:
leandros@archlinux ~
% lsusb !7939
Bus 005 Device 014: ID 18d1:4ee2 Google Inc.
Bus 006 Device 008: ID b58e:9e84
Bus 006 Device 006: ID 046d:c068 Logitech, Inc. G500 Laser Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
The empty device seem to be my microphone, because if I unplug it I get this:
leandros@archlinux ~
% lsusb !7940
Bus 005 Device 014: ID 18d1:4ee2 Google Inc.
Bus 006 Device 006: ID 046d:c068 Logitech, Inc. G500 Laser Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
(I use a PS/2 keyboard)
Any ideas how to fix this? (without reverting to an old kernel build)
Last edited by Leandros (2013-02-25 20:00:32)

Getting the USB microphone to appear in Live Meeting 2007

Optia AF camera under Vista, using Live Meeting 2007. The video works fine. But, neither Live Meeting nor Office Communicator lists the built-in USB microphones as a choice when configuring the audio. The only way I can get audio to work is by using the headphones and microphone connected to my sound card.
Strangely enough, the USB microphone works fine with Windows Sound Recorder if I set it as the default sound input device in the Windows sound control panel.
Anybody else have this problem and find a solution?

Performance tip: Keep the Desktop clutter-free (empty, if possible)
Mac OS X's Desktop is the de facto location for downloaded files, and for many users, in-progress works that will either be organized later or deleted altogether. The desktop can also be gluttonous, however, becoming a catch-all for files that linger indefinitely.
Unfortunately - aside from the effect of disarray it creates - keeping dozens or hundreds of files on the Desktop can significantly degrade performance. Not necessarily because the system is sluggish with regard to rendering the icons on the desktop and storing them in memory persistently (which may be true in some cases), but more likely because keeping an excessive number of items on the Desktop can cause the windowserver process to generate reams of logfiles, which obviously draws resources away from other system tasks. Each of your icons on your desktop is stored as a window in the window server, not as an alias. The more you have stored, the more strain it puts on the window server. Check your desktop for unnecessary icons and clear them out.
Keeping as few items as possible on the Desktop can prove a surprisingly effective performance boon. Even creating a single folder on your Desktop and placing all current and future clutter inside, then logging out and back in can provide an immediately noticeable speed boost, particularly for the Finder.
And it is why Apple invented 'Stacks' for Leopard.
Here is Apple's take on the subject:
http://www.apple.com/pro/tips/immaculate_desktop.html

Captivate doesn't recognize my USB microphone

Hi there,
I'm using Vista (32) with Captivate CS4. I have USB microphone (Sennheiser PC-166) that works beautifully with other applications, but I can't get Captivate to recognize it. When I configure settings...Captivate hears my default PC microphone, but is stone deaf when it comes to the USB mic. I've reinstalled Captivate. I've downloaded updates. But nothing works. Any ideas?
Christy

Hi Christy
Does the link below help?
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

The base mini has 4GB and a 5400 RPM hard drive. It is slow to start up and slow to launch large application such as Word (and I'd assume Adobe Audition) due to the slow drive. I've not used a new 4GB model, just the 8GB model, and the 8GB model (except for the slow drive) handles everything I've thrown at it, including running Photoshop, Word, Safari, and Mail at the same time but there is sometimes a delay switching between programs as the swapfile is updated. Overall I was not happy with the 5400 RPM drive (perhaps because I have MBA and iMac with Fusion drive) so I eventually upgraded it with an SSD. Now the mini is truly a warrior.

Cannot hear USB microphone in headphone

I'm using the Logitech USB microphone which works fine for Skype and quicktime recordings. The problem is that I cannot hear the microphone in my headphones which makes it difficult to monitor the recording. The input volume level is working in System Prefs but I cannot hear the sound from the microphone. I also cannot record my side of Skype conversations with Wire Tap Pro since I cannot hear the audio from the USB microphone on the iMac. Any ideas?

Edward Long wrote:
Yes indeed, worked beautifully. Thanks for the prompt reply.
You're welcome anytime.
Glad to be of help.
Have Fun
Stefan

How do I plug a non-USB microphone into a Mac Pro?

Question from an audio newbie....I've got a 2009 Mac Pro desktop computer. I just bought a microphone headset. The headset has a two-pronged plug in, a green one for the headset (speakers) and a pink one for the microphone. My Mac Pro has two speaker ports - one in front and one in back - but I can't find anyhwere to attach the microphone plug.
I don't want a USB headset because my USB ports are already maxed out. How can I attach this non-USB microphone and get it to work?

Look at your back side. Look at the booklet too that it came with or from support page manual.
www.apple.com/support/macpro
there are digital out audio and microphone on the backside.

IBook G4 - Seeking Compatible USB Microphone

Both of our iBook G4 (1.33 and 1.42 GHz) computers have dead internal microphones (located on right side of LCD panel). I'm hesitant to take the time to replace them, due to risk of damage to other components. As many of you know, there is no audio input jack on the iBook G4; only audio output.
We've been looking at various external USB microphones that are totally encapsulated within the USB stick. We found one out there that could do the job, but we are wondering if there is something else out there that could serve as another option. All we want to be able to do is set up audio for Skype on the 1.33 GHz machine, for now.
We believe that the USB ports are USB 1.0 and are not powered (i.e., 2.0) but could be wrong.
Advice would be greatly appreciated.
Here's the link to the only compact USB microphone stick we were able to find, by the Sound Professionals:
http://www.soundprofessionals.com/cgi-bin/gold/item/SP-USB-MIC-1
Thanks in advance!
-- Chris

I am pretty sure that the USB ports on your computer would be 2.0, but I think you can test this. Try plugging in a USB storage device (Made fairly recently). Then go to the Apple Menu, and click About This Mac. Then click More Info. When System profiler opens, click down the Triangle next to hardware and select USB. You probably have 2.0 if under the device you plugged in it says up to 480mbs per second. You should have USB 2.0, because my iBook G4 is older than yours and it has USB 2.
For Skype, I would think that any microphone for Mac OS X should work. Not sure, but it would be my best guess.
Hope that at least helped!
TheMacKid

USB microphone

Similar Messages

Maybe you are looking for