Usb midi controller wont work

Hi my edirol usb midi controller wont seem to work with gb 08 even though i have downloaded the driver.the midi controllers screen says that it is sending data and everything but still no sound...any help wouild be fantastic cheers!

Quote from: NovJoe on 14-July-08, 12:17:16
Do you have a wired USB mouse to try?
It seems to me that the drivers from the WIFI mouse is not of the correct version for the OS you are running on.
You may want to google for the correct drivers as well.
I have tried a wired usb mouse and that wont work either :(
There are only 1 set of drivers for the wifi mouse I have, checked on the manufactures website and the driver version is the exact same one as I have on disk. The mouse worked on my other pc with the exact OS 
A ps2 wireless mouse works but that mouse has no range :(
Quote from: OKIGiveIn on 14-July-08, 03:05:35
Hi - I hope this helps. The problem may be hardware related in which case I can't help, but if not, try this.
Right click and delete both of the yellow mouse HID drivers in device manager. Then do a normal shutdown and Restart with the keyboard using Ctrl-Alt-Del to bring up Windows Task Manager.
This should force the system to reinstall drivers when it next boots.
You may find that a simple Scan for Hardware Changes also works after you have deleted the yellow drivers.
Another trick is to try the mouse in other USB ports - sometimes the system just gets confused and sets the device to a particular port. If it is put in another port it often can't find the device.
Good Luck
I have tried the wireless mouse in every usb port, also uninstalling them in device manager - all had no effect :(

Similar Messages

  • USB MIDI Controller no longer working after Logic 8 upgrade

    Hello, my M-Audio O2 USB MIDI Controller worked brilliantly with Logic Pro 7 after simply plugging it in. I never needed to install any drivers or do any setup. Now, after upgrading to Logic Pro 8 it isn't recognized and does not work. Does anyone know what's going on and can anyone please give me some advice on how to fix this problem? Thanks

    Go to Logic-Pro beside the Apple Logo at the top of your screen to the Left,
    then Preference,
    then scroll to Control-Surface settings,
    now select set-up
    From there delete and then reinstall your control-Surface, do it manually as the Scan doesn't work all the time,
    Fr.BlayZay.

  • USB MIDI controller no longer recognized by mac (not even in System Information).

    Hello!
    I have an M-Audio Keystation 49e that I have been using with my MBP (early 2008 model) for a few years with absolutely zero problems ever. I recently bought a very generic Chinese MIDI interface ("Sanoxy" brand) to go between my full-size Yamaha and mac so that performances of parts into logic would be on weighted keys and such.
    For a while I used both the MIDI interface with the Yamaha and the little 49-key MIDI controller (via USB and also powered by the USB) with no problems. I believe this problem occurred when I tried to use both the MIDI interface and MIDI controller on one USB port using a Targus external number pad (unpowered) that has two USB ports on it (bad idea I'm sure). I did this because my MBP only has two USB ports on it and I was using the other for my audio interface.
    I have reset PRAM more than a couple times, reset SMC, cleaned caches (even though this could be done more thouroughly maybe with a recommended program besides Cocktail - trial is expired), even replaced AppleMIDIUSBDriver.plugin from my parents iMac which the MIDI controller still works on. All this and nothing. The keyboard is not recognized as even being plugged into the USB port on System Information even though the lights are on, much less AMS.
    Any other information you need I'd be happy to let you know.
    Super thanks!
    Cody

    Bumpitty bump bump

  • Usb & sdcard port wont work in windows 7

    Hi all,
    my usb & sdcard port wont work in windows 7, also i cant install drivers for coprocesor and the sm bus controller,   I have a macbook pro 13" A1278, 
    I have tryed to install the drivers from the osx cd,  but to no avail it just wont work, 
    Please can anyone help

    the reason i ask is base system device can be a few differant things but about 90% of what i have seen it show up is the card reader. try to uninstall anything in device manager that has to do with the mic and restart the laptop. this will allow windows to try to find and install the correct drivers. also open realtek HD audio manager and make sure the mic is not muted.
    -civicman4-
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

  • Req any examples of how to use a USB midi controller​/keyboards with Labview TIA

    Req any examples of how to use a USB midi controller/keyboards with Labview TIA

    Hi,
    To access the MIDI ports you will need to call the Windows SDK. To send MIDI commands is relatively easy, here is an example that shows you how to send data to a MIDI controller or keyboard.
    As far as input goes, this is the hard part. There are a series of functions that you need to call to open up the device, set some buffers and and possibly a callback to get notifications on the incoming data.
    Reading MIDI data will not be an easy task, your best bet will be to implement this in a DLL and call that DLL in LabVIEW, there should be some code available o the web.
    = "http://msdn.microsoft.com/library/default.asp?url​=/library/en-us/multimed/htm/_win32_multimedia_... is a link to the Windows multimedia functions that you could use for MIDI input.
    Let me know if you have any further questions.
    Regards,
    Juan Carlos
    N.I.

  • USB MIDI CONTROLLER- LOGIC PRO 7- I CAN SEE THE LIGHTS BUT NO SOUND OUT?

    I just got logic pro 7.2 so i am very green, garage band automatically recognizes the usb midi controller and i can hear it,
    in logic it recognizes it i can see the lights for sound levels but no sound is coming out, ive been trying to figure this out.

    Heck, if loneliness is your thing... more power to ya!
    now why cant i hear the midi
    MIDI doesn't make a sound. You either need to assign a software instument to it or use an external device, all depending on the track you chose. If you, perhaps elaborate a little more as to what you did (typing with your caps lock released), there's a better chance of getting your problem solved. If you're hearing your recorded guitar, then there's a chance you selected the wrong type of track to record to as far as MIDI tracks go (there is a difference in Logic).
    jord

  • Looking for a way to get my Product ID and Vendor ID so I can enable my Radium 49 USB MIDI keyboard to work with Labview 7

    Looking for the Product ID and Vendor ID for my Radium 49 USB MIDI keyboard to work with Labview 7
    Is there a tool to find out the Vendor ID and Product ID for a USB device?
    Example: of what I'm looking for
    The Product ID for National Instruments DAQPad-6020E is 0x12C0. The
    USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093)
    (that is decimal 4243).
    Thanks for all the fast responses this newsgroup RULES!!!!!!!!!!!!

    http://digital.ni.com/public.nsf/allkb/335A90747734097886257070006415B9
    How To Find The Vendor and Product ID for USB Devices?
    Primary Software: Driver Software>>NI-VISA
    Primary Software Version: 3.3.1
    Primary Software Fixed Version: N/A
    Secondary Software: N/A
    Problem:
    I want to make an NI-VISA driver that requires the vendor and product ID?
    Solution:
    There is a utility called USBView,
    free from Windows, attached below, which you can use to view what is
    connected to your computer's USB ports. It is necessary to load this
    program and connect the USB device in development. Upon selecting the
    device in USBView, one can then look on the right side of the
    application window to obtain the Product ID and Vendor ID. This will
    allow you to enter in the correct IDs when creating a driver .inf file
    when using the VISA Driver Development Wizard. For more information
    about how to use the VISA Driver Development Wizard see the related
    links below.
    Note: It is necessary to keep the hexadecimal
    (0x####) format. Do not remove the "0x" hexadecimal format preceding
    the ID number. 

  • USB Midi Controller

    Hey,
    I'm running Mac OSX 10.6.4 with Garageband 09 and Logic Pro.
    I've been trying to figure out how to use my Casio Privia keyboard as a Midi controller in Garageband through USB, and can't seem to figure it out. I used it as a Midi controller (through USB) on my laptop and know it's compatible with Garageband, but no matter what Casio Midi Driver I download GB doesn't even pick it up.
    I know there is a way to do it, I'm just struggling to find it...any suggestions?
    Thanks!

    Try this driver, it has worked in many cases:
    http://code.google.com/p/casiousbmididriver/

  • Help with usb Midi controller on brand new machine! Please!!

    I just unboxed my macbook pro 13" non-retina and updated to 10.9.1, installed a few of my apps, etc.    I'm having a meltdown over my midi-controller not being recognized. It is a Roland A-49 USB Midi Keyboard controller that is not powering on. It runs off bus power just fine in my older 15" MBP and also from my '12 Mac Mini. When I pull up the system profiler, under USB it reads to me:
    How can I get this working properly?

    Hi there, been a viewer of the discussions here for a while & felt compelled to finally sign up to hopefully offer some help with this problem as I had exactly the same when I first got Logic Pro.
    The problem is more to do with the sound setup than the controller keyboard as logic is sensing midi data as you have seen in the transport.
    I would suggest firstly (Hopefully Pro & Express are the same in these respects) clicking on the Logic Express tab in the top left, then Preferences, then Audio.
    In the box that appears select the Drivers tab. Then make sure that the Core Audio check box is ticked. Under that make sure that you output source is selected (ie your interface if using monitors, or built in Audio if not)
    Hopefully this should help.
    The simplest to test your sound is by clicking on the Audio tab (3rd or 4th along at top) & opening the Loop Browser, choosing a catagory & draging a sound onto a track.
    Remember to click on the track you will be dragging onto to select it & in the Loop Browser Blue loops go onto audio tracks & green onto instrument tracks.
    Now with testing the controler keyboard...
    Click on an instrument channel, then goto the bottom left of the screen where you will see that channels fader.
    Above the fader click on the I/O (you may have to click & hold here) choose either mono or stereo, then choose say the EXS24 & try you keyboard.
    Hit * on the numeric keypad & play something, then hit space to stop & you will have your 1st region.
    I hope this helps with you problem, Logic can be confusing at times but is worth sticking with.
    Good luck

  • New Imac i5 (2011) CME UF6 Midi Controller not working!

    I have a new 2011 iMac i5 2.7GHz Quad-Core.And my CME UF6 Midi Controller is not working . It works fine with my older mac book pro 1.83ghz intel core duo. I have installed the latest driver from CME which is for the intel macs. It shows up in the audio midi setup just fine. But when I click on "test setup" it will only play one note and stop. I will then have to rescan midi for it to play one note again,and again it stops. Same goes for when I use it in a Logic Pro 9 with all the newest updates applied it will play a few notes and stop working. Any help would be great I know it may be some time before I get any help because the this iMac just came out. By the way the imac is all up to date everything is up to date. And yes I have tried every single usb port on the iMac.

    I have a new 2011 iMac i5 2.7GHz Quad-Core.And my CME UF6 Midi Controller is not working . It works fine with my older mac book pro 1.83ghz intel core duo. I have installed the latest driver from CME which is for the intel macs. It shows up in the audio midi setup just fine. But when I click on "test setup" it will only play one note and stop. I will then have to rescan midi for it to play one note again,and again it stops. Same goes for when I use it in a Logic Pro 9 with all the newest updates applied it will play a few notes and stop working. Any help would be great I know it may be some time before I get any help because the this iMac just came out. By the way the imac is all up to date everything is up to date. And yes I have tried every single usb port on the iMac.

  • Midi controller stopped working

    I'm hoping someone can help. My midi keyboard stopped working in the tune that I'm working on. It works fine in other LP7 sessions that I'm working in but it won't work in this one particular session.
    The transport menu shows "No In" for midi... I'm wondering if that is a clue to anything....
    I'm using a M-audio Radium USB keyboard.
    Thanks!

    Today's rant is brought to you buy the word "bollocks".
    This post is the 3rd or 4th report of a connection between the physical input and the seq. input disappearing. Sorry, but this is "bollocks" and needs to be addressed.
    "Thanks for letting me vent, honey. And for letting me use the word "bollocks". I feel much better now."

  • USB MIDI keyboard not working

    Hi everyone,
    I recently upgraded to a Macbook (White) and I haven't been able to get my MIDI keyboard to work with it. It's a Novation Remote 25 LE, and all of the documentation for it claims it is fully USB compliant and does not need any drivers to function. Well, that doesn't seem to be the case. I used the USB drivers for OS X that Novation has on their site to no avail.
    The catch is, it worked flawlessly on my old 12" Powerbook without drivers. Comparing the two configurations, I notice that using the Audio MIDI Setup program under utilities the Remote LE shows up, but has no ports assigned to it, nor can I add any, while it has "Remote LE" listed under port on my old Powerbook. Anyone have an idea how I can get this up and running? Thanks in advance!

    There's another user with a very similar issue to yours. It makes me think that Leopard is the problem here--unless you had Leopard installed on your PowerBook?
    Perhaps keeping an eye on this thread will help:
    http://discussions.apple.com/thread.jspa?threadID=2031411&start=0&tstart=0
    ~Lyssa

  • Midi controller doesnt work with ES2

    Hi
    Im using my virus TI synth as a midi controller for my soft synths.
    It works just fine with my NI instruments, the midi learn functions just fine with those,
    but when i try midi learn with the ES2 i cant get the virus to control any of it.
    Can anyone point me in the right direction?
    Thanks
    digi

    With the help of Bee Jay (much thanks), I figured this out. What you have to do is this
    First, use the Virus TI graphic user interface to create a Remote Template. You can learn how to do this by going to pages 24-26 of the Virus Control Tutorial.pdf (read it carefully). I would suggest creating a new template titled "Logic".
    In creating this template, you will need to create MIDI strings for each of the Virus' knobs (page 25-26 in the Virus Control Tutorial.pdf). I would suggest using some of the MIDI controller numbers for the ES1's parameters, which are listed on page 248 of the Logic Studio Instruments and Effects.pdf manual - if you do that, the ES1's knobs will respond to those Virus knobs for which you assigned the specific controller numbers listed for the ES1. Then you can create some more unique MIDI controller strings any extra (unassigned) Virus knobs. In any case, each of the Virus knobs has to be assigned to a unique MIDI Controller number.
    After this is done, you can use Logic's Controller Assignments "learn" function to assign the virus to control the other Logic instruments. First, make sure your Virus is in Remote mode and your new "Logic" Remote Template is loaded, and open up a Logic instrument (e.g., the ES2). Now hit command-L. Logic's Controller Assignments window will appear, but you can just drag it off to the side for the moment. Now click on a knob on the ES2, then twiddle the knob you want to use on the Virus. Do that for as many knobs as you want, then deactivate the "Learn" button on the Controller Assignments window when you're done.
    Then, whenever you want to control a Logic instrument which you've set up this way, you just need to put the Virus in Remote Mode and make sure you load the "Logic" Template.

  • Mac doesn't find the Xone:1D (USB MIDI Controller)

    Hello,
    My MacBook Pro (15", Mid 2009) doesn't recognize my MIDI Controller by Allen & Heath. It isn't shown in the Sytem Profil and Audio-MIDI Setup.
    My mac run the newest version from 10.6.

    See the last part.
    iTunes Syncing

  • Standard Enhanced PCI to USB host Controller not working

    Plz help me its suck i can't find any driver for this USB port its suck all my usb ports are not working they not accepting any usb or some thing or intel managment interface also not working plz help me . Thankyou
    Us Device PCI
    Device PCI\VEN_8086&DEV_1E26&SUBSYS_17F8103C&REV_04\3&11583659&0&E8 was configured.
    Driver Name: usbport.inf
    Class GUID: {36FC9E60-C465-11CF-8056-444553540000}
    Driver Date: 06/21/2006
    Driver Version: 6.2.9200.16384
    Driver Provider: Microsoft
    Driver Section: EHCI.Dev.NT
    Driver Rank: 0xFF2005
    Matching Device ID: PCI\CC_0C0320
    Outranked Drivers:
    Device Updated: false
    Intel Mangagment interface
    Device PCI
    Device PCI\VEN_8086&DEV_1E3A&SUBSYS_17F8103C&REV_04\3&11583659&0&B0 was configured.
    Driver Name: null
    Class GUID: {00000000-0000-0000-0000-000000000000}
    Driver Date:
    Driver Version:
    Driver Provider:
    Driver Section:
    Driver Rank: 0x0
    Matching Device ID:
    Outranked Drivers:
    Device Updated: false

    What is the installed operating system?
    In which region of the world are you located?
    Try the following Intel Management Engine software
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-113870-1&cc=us&dlc=en&lc=en...
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for