USB modem works only after reinserting twice.

I have a strange issue with my Arch Linux setup and ZTE WCDMA modem. I recently bought this modem and trying to connect to internet through wvdial. I initially thought that modem is not being detected under Arch Linux (as it was working fine under Ubuntu and Fedora). Later on I understood that the vendor/ product id is changing when I reinsert the modem. For example, When I insert the modem immedietly after boot, the following is shown as vendor/ product id and modem does not connect to internet:-
[sundar@arch ~]$ sudo lsusb
Bus 001 Device 008: ID 19d2:fff5 ZTE WCDMA Technologies MSM
Then I have to remove and reinsert the modem. This time device indicator (kde) and dolphin will show as another partition and vendor/ product id will change to following:-
Bus 001 Device 007: ID 19d2:fff1 ZTE WCDMA Technologies MSM
And without any issue modem will connect to the internet through wvdial. How do I over come this issue and connect to internet directly without removing modem?

Any idea?

Similar Messages

Net works only after running "dhcpcd eth0" : Kernel 2.6.27

Hi.!
Ever since I upgraded to 2.6.27, my net connection works only after I run the command "dhcpcd eth0" after booting in the system.Any suggestions to get net working without issuing this command would be great.!
Thanks and Regards,
Poisonblack
EDIT: A search on the forum reveals these two threads that may be related to mine...
http://bbs.archlinux.org/viewtopic.php?id=57081
http://bbs.archlinux.org/viewtopic.php?id=57043
http://bbs.archlinux.org/viewtopic.php?id=57102
Will have a closer look on the threads when I get back on Arch.
Last edited by Poisonblack (2008-10-16 17:32:54)

Poisonblack wrote:
Hi.!
Ever since I upgraded to 2.6.27, my net connection works only after I run the command "dhcpcd eth0" after booting in the system.Any suggestions to get net working without issuing this command would be great.!
Thanks and Regards,
Poisonblack
EDIT: A search on the forum reveals these two threads that may be related to mine...
http://bbs.archlinux.org/viewtopic.php?id=57081
http://bbs.archlinux.org/viewtopic.php?id=57043
http://bbs.archlinux.org/viewtopic.php?id=57102
Will have a closer look on the threads when I get back on Arch.
I don't know if this will help or not, but I was having a problem with the "-R" argument and my dhcpcd.
I used to have my dnsmasq and OpenDNS using this guide: http://wiki.archlinux.org/index.php/Pos … ure_dhcpcd
I had to remove the "-R" to get my internet to work after the last update.... it's still not fixed but at least my Internet works when I start.

DEAR APPLE, PLEASE MAKE YOU USB MODEM WORK WITH LION. Thank you so much.

DEAR APPLE, PLEASE MAKE YOUR USB MODEM WORK WITH LION.
Thank you so much,
Yuri

Yuri,
Try Apple Feedback
Check out the Zoom 3095

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

did ae install without problem? check the install logs to be sure (Troubleshoot with install logs | CS5, CS5.5, CS6, CC)
if it did, what do you see when clicking the executable?

Captivate 8 - Next Button Works Only After Viewing Slide

How do I make a Continue button work only after the viewer has viewed the entire slide?
I also want the viewer to be able to skip ahead instantly through slides they have already viewed.
Thanks.
- Jason

Let me show you what I'm trying to create here. Sorry I need specific instructions since I'm a newbie to Captivate and not familiar with conditions and advanced actions.
I am currently using normal buttons (not a shape button) to create my PREVIOUS & NEXT buttons. Based on your advice I will switch to shape buttons.
"It could be done with a conditional advanced/shared action on Enter of each slide. You'll need a user variable per slide, a Boolean, that you change on the first visit from a default value of 0 to 1, after having checked its value."
What specifically do I select for the "On Enter" of each slide?
And do I only need to put this condition in the "On Enter" section of each slide? Or do I also need to setup special conditions for the NEXT button?
Thanks.
- Jason Boone

Does The Apple USB Modem Work With The Mac mini ??????

Just wanted to know if anyone has successfully used the new Apple USB Modem with the Mac mini, is it compatable ????
Thank you for your input on this.
Mike D.

It says it works with the Mac mini, but does it really? I just received my modem yesterday and could not get it to work with my 1.42 mini - the more expensive one that comes without a dialup modem! I looked carefully at the specs and it appears the Apple USB modem requires Mac OS 10.4.3, not the 10.4.2 that comes with the Mac mini.
Talk about stupid! And the mini docs say it comes with the "latest" version of Tiger. Not! So I can download the upgrade, I guess. IF I could get on the internet! This is extremely annoying. I guess I'll have to download the upgrade on another computer and transfer it somehow. Boy, those Apple guys sure are tech geniuses, aren't they???
[ Edited by Apple Discussions Moderator ]

SUBMIT button works only when clicked twice... Online interactive form

Hi,
I have created a interactive form with SubmitToSAP button. In this I will enter a contract number and will click SUBMIT button.
For the first time it is fetching the contract details properly.
In the same form, i am changing the previously entered value with another contract number and clicking SUBMIT.
Now the details for the previously entered contract number is only displayed. Again if i try for the same value ( which i used for the second time ) and press submit, it is workin correctly.
So, the problem is, except for the very first time SUBMIT button action, the button works fine only when clicked twice..
please help me in solving this issue..
Regards,
Surya.

Hi,
In addition to my previous post, I am also using RESET FORM button from Library.
First I am entering the contract number (say 400000000) in the form and clicking submit button. The contract details are fetched and displayed in the form.
Now i am Resetting the form using Reset Button, and giving new contract number (say 400000020). When I pressed Submit button , the details of the first entered contract number (400000000) is coming.
Then again I am giving 400000020 or any other number, it is fetching the details correctly for that number...
Can anyone help me in this issue..
Thanks,
Surya.

USB OTG Work only When USB Debugging is On

My USB OTG worked correctly. But Now it works only when USB debugging is turend on. What Should I do Now

@ytheekshana
what if you repair the phone with PCC
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Does Apple USB modem (or any USB modem) work with Telix under Boot Camp?

I know, it's one heck of an obscure and specific question. But it just so happens to be critical to whether I try and use an Intel Mac (new, with Leopard, under Boot Camp) as a PC (where a PC would be a lot easier as far as having a built-in 56k modem goes). By Telix I mean the most "recent" version of Telix for Windows. Thanks in advance for the assistance.

It says it works with the Mac mini, but does it really? I just received my modem yesterday and could not get it to work with my 1.42 mini - the more expensive one that comes without a dialup modem! I looked carefully at the specs and it appears the Apple USB modem requires Mac OS 10.4.3, not the 10.4.2 that comes with the Mac mini.
Talk about stupid! And the mini docs say it comes with the "latest" version of Tiger. Not! So I can download the upgrade, I guess. IF I could get on the internet! This is extremely annoying. I guess I'll have to download the upgrade on another computer and transfer it somehow. Boy, those Apple guys sure are tech geniuses, aren't they???
[ Edited by Apple Discussions Moderator ]

VPN works only after reload

Hello,
I have a Cisco ASA5505 setup for VPN trough IPSec (L2TP). I can connect from wherever I want to it using the user and password.
The only problem is that, after 2-3 days I have to reload the appliance because it denies connection on port 500 UDP. After the reload everything works fine again.
Do you know how to handle this kind of problem? Is is a bug in the software or it could be only a misconfiguration?

forget the diagnostics and launch airport utility and if a yellow button is showing, double click it and read what it says to correct.

Why does keyboard work only after restart

This is an irratic problem. I have pen/pad not mouse but same thing methinks, can open files etc but when it comes to filling in anything it will not allow, sometimes even after restart it works butthenafter abreak I find it will not allow typing again!
any ideas

connected via usb/wacom... software=10.5.8
thanks

Virtual hosts work only after I will restart a httpd

This is strange. I'm using Apache server, and have problem with virtual hosts. For example I have a host:
<VirtualHost myhost.localhost:80>
ServerAdmin [email protected]
DocumentRoot "/srv/http/projects/2014/myhost.pl/public_html"
ServerName myhost.localhost
ServerAlias www.myhost.localhost
ErrorLog "/var/log/httpd/myhost.localhost-error_log"
CustomLog "/var/log/httpd/myhost.localhost-access_log" common
<Directory "/srv/http/projects/2014/myhost.pl/public_html">
AllowOverride All
Options Indexes FollowSymLinks
Require all granted
</Directory>
</VirtualHost>
I also added a
127.0.0.1 myhost.localhost
line to /etc/hosts file.
Now when I restart my computer myhost.localhost will show me default "It works!" message, and just after "sudo systemctl restart httpd" the proper website will appear under this address. Why is that?

Not sure what your actual hostname is; but this is probably related to DNS not being available at boot. Depending on your actual name; apache might listen on the wrong interface / source-address for this domain; which is only fixed by restarting it when you have a working dns-server.

Ipod works only after keeping it near the car airconditioning vents

I have an unique problem. I stay in the middle east and have left behind my ipod in the car a number of times. My 2 year IPod is showingm a unique problem. It refuses to send anything to the earplugs/car speakers for the first 5 minutes or so. However it operates smoothly (meaning on screen everything is fine).
Only when I keep the ipod on the air conditioning vents for a couple of minutes, the ipod starts working after making a few screeching noises..
Pls help.

EDEEPAK wrote:
The ipod was working fine for two years , so it should not be the temperature problem.
I disagree. Electronic components can be damaged by excessive heat, and since the temperature inside a car here in the UK on a mild spring day can be as high as 35° C, I would imagine that in the middle east, it would not take long for the heat build up to be well above the 45° C maximum specified by Apple.
Typically, when electronics get very hot, the metal components can expand and if the temperature goes above the design limits this can force the soldered connections of two different parts to separate, thereby causing all or part of the unit to stop functioning correctly. (I still have a first generation CD player that does this due to the amount of heat it generates internally. I've repaired it three times!) If a connection breaks, there is a theory that "freezing" the iPod (or rather - cooling it down) will cause the metal to contract and thereby make proper contact again, thus allowing the iPod to work. This is not a "fix" and may not work at all.
But what I've mentioned above applies to larger devices with parts you can see. The iPod has very small components and circuits that are too small to see with the naked eye, possibly making it even more prone to temperature damage.
Consider this; some manufacturers "test-bake" their products in special ovens so that they can prematurely age them in order to test how long they will last in real life. So the fact that your iPod worked without trouble for two years in excess temperatures does not mean that it will continue to do so.
Sorry to say that it sounds like your iPod is displaying the typical symptoms of a heat damaged electronic device.

W520 Turbo Boost works only after entering Setup (BIOS 1.34)

Hi there,
similar issue but not quite fitting the thread about Intel TB missing in Battery mode, I can reproduce the following BIOS/Windows bug:
- boot the system without entering BIOS straight to Windows 7 : Intel Turbo Boost not working (i.e. frequency dynamically changes between 800 and 2500 Ghz)
- boot the system, enter setup, press F10 and save settings (without changing anything), boot Windows: Turbo Boost works
Is this a BIOS or a Windows problem? It is a workaround to get Turbo-Boost always, but quite inconvenient.
Can someone with similar Turbo Boost problems perhaps check if this is a general issue and could be fixed by Lenovo in a new BIOS update?
System: W520 i7-2860QM @2500 MHz, BIOS 1.34 (same problem on BIOS 1.26).

Hi again,
after spending an afternoon with an IBM service technician we isolated the problem. To make sure we switched boards and tested 4 bios version: 1.26, 1.32. 1.34 and 1.35.
Problem can be reproduced and monitored with Intel Turbo Boost Monitor tool and/or CPU-Z.
Turning
BIOS CPU setting: hyperthreading - off
causes undefined behavior of the turbo boost settings. It works for some reboots. It seems to cause problems more often when the NVidia card is running (either through setting GPU to discrete or by using DisplayPort). Sometimes when taking out AC adapter and plugin back in it won't.All in all very random behavior, but 1 in 4 trials it won't work. Also, when the notebook was off for some time, turbo-boost never works on first boot (need to enter setup at least once, then it will work for some time and reboots).
Symptoms:
Whenever Turbo-Boost is not working, CPU goes only to 2.5 Ghz at max.regardless of energy plan settings.
Switching Hyperthreading back on has (so far) solved the isse (both on AC and battery-without-GPU mode), tested successfully with BIOS 1.32, 1.34 and 1.35. Now we have turbo boost but slightly slower single-core simulationn performance. Not nice, but at least there is a workaround.
Workaround so far (until Lenovo has fixed the BIOS): leave Hyperthreading turned on.
(PS: The service issue was marked as "not solved" and will be send a level higher in Lenovo Support - let's see how this will be taken care of).

Why does MMS work only after turning the iPhone off and on for iOS6?

I got the new iPhone 5. When sending/recieving pictures i have to turn the phone off and then on. For sending, it works for about 5 minutes and then i can't send anymore. I tried turning wifi off and leaving data on, turning LTE and wifi off with data still on, and other combinations. The only time it works is when i just turned it on.

The message you are seeing is telling you that you do not have enough storage on your device. That has nothing to do with iCloud storage.
iCloud storage is storage on Apple's servers hosting your online iCloud account. The storage on your device is local and cannot be expanded - it is whatever you bought with the device (16GB, 32GB, 64GB).
You need to delete things on your device to increase free space on the device itself.
For example, if you have a lot of pictures in your camera roll, you need to sync those to your computer's photo management software and storage, then delete them from you iPad.
You can delete apps you no longer need or use. You can delete messages you no longer read or use.
Bottom line is you need to remove stuff from the iPad itself to free up more space.

USB modem works only after reinserting twice.

Similar Messages

Maybe you are looking for