USB mouse disconnects randomly, sometimes comes back

ive been having a reoccuring problem with my logitech mouse disconnecting and reconnecting. as of lately it just disconnects and wont come back untill i unplug and replug it in, then it will work for a few more days. whats intresting is say the mouse disconnects...i can unplug my ipod cable (not attached to ipod) and plug that back in, and the mouse will reconnect. the computer is in a recording studio, it has a firewire audio interface connected, the mouse and keyboard going to seperate usb slots, an ilok, and my ipod cable. its a macpro 3.1 running 10.6.8 any thoughts?

Time to take it back in for repairs.

Similar Messages

USB mouse disconnects when laptop on battery

Hello,
I am using Gnome 3.6 on 3.6.10-1-ARCH. Whenever I run my laptop on battery power, my external usb mouse disconnects after some inactivity period. If I plug it to external power source, it again starts working fine.
I suspect there must something in gnome 3.6 (weird optimization) or something to do with laptop-tools which disconnects the usb mouse after some time of inactivity to save power. How to fix this.
I referred this link, but it did not provide me way to fix this.
https://bbs.archlinux.org/viewtopic.php?id=49503
https://bbs.archlinux.org/viewtopic.php?id=149530
Update: I noticed that I had not enabled laptop mode tools so problem must be with gnome3. I have now enabled this and set my USB mouse id in blacklist, so that it does not autosuspend. Still It is getting auto suspend.
Last edited by ameyjah (2013-01-06 16:38:09)

I imagine that your usb ports control is set to auto... which will suspend the device after a time of inactivity. The solution would be to have this not set to auto... though I am not sure how to do this with laptop-mode-tools in place. I don't use laptop-mode-tools, and it is my opinion that it actually makes things harder when you encounter things like this. Instead of learning where the configuration for this is within /sys and then creating the necessary configuration to change it, you now learn where it is in /sys, what is changing it automagically for you, then you have to learn the intricacies of that particualr power management tool.
So although I cannot help you with yout laptop-mode-tools, the file that sets this is /sys/bus/usb/devices/usb[1-9]/power/control or /sys/devices/pci0000:00/0000:00:1a.0/usb1/power without the symlinks on my machine for usb1.
Just my opinion, but with the power that comes in computers these days (for the past several years in fact), having something like laptop-mode-tools is pretty worthless. If you just have all the settings set as though it were on "battery" all the time, I bet there would be no discernible difference. I know I cannot tell, and then my computer probably charges ever so slightly faster because it is not set to consume more power when I plug it in.

Mac mini (late 2012) HDMI video going blank randomly in Yosemite 10.10.1; sometimes comes back on with snowy screen

Wow, this reminds me of what happened with Mavericks 10.9.0 until 10.9.3 and later were released and fixed this problem.
My monitor is a Dell S2440L connected to my Mac mini late 2012 via an HDMI cable.
The monitor goes blank randomly and sometimes a snowy screen like you would see when watching a UHF
channel on an old CRT TV shows up when the video comes back on. This happens while in the OS.
I also have power management problems again with computer not sleeping properly and my Magic Mouse
being able to wake up the computer despite "Allow Bluetooth devices to wake this computer" being unchecked.
I also have Wake for network access, power nap and start up after power failure unchecked as well.
Computer sleep and display sleep are set to "never" as I always had it with Mavericks.
These problems occurred after shutting down my Mac and restarting it this morning.
I know using a VGA cable will fix it but I don't want to do that.
Sorry for sounding frustrated but I'm not alone. So many people are having the same issue
of HDMI video blanking out while in the OS.
I love the look of Yosemite but wish I was back with Mavericks 10.9.5 where everything worked
flawlessly and I really mean flawlessly. It was magical. Not a single problem.
I guess we have to wait for 10.10.2 or 10.10.3.
I don't want to go back to Mavericks but if my screen keeps blanking out then my computer is of
no use for work or multimedia.
I'm sorry about the rant.
If anyone has figured out a workaround until Apple can issue another point release, please let me know.
I already tried resetting the SMC and NVRAM several times to no avail.
Thanks in advance.
I appreciate any help.
Paul

EtreCheck version: 2.1.2 (105)
Report generated 13 December 2014 at 9:03:00 AM GMT+7
Hardware Information: ℹ️
Mac mini (Late 2012) (Verified)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
DELL S2440L - forced RGB mode (EDID override) 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:53:11
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 249.62 GB (150.23 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD 2 (disk0s4) /Volumes/Macintosh HD 2 : 249.49 GB (172.23 GB free)
USB Information: ℹ️
Apple Inc. iPhone
Apple, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/DAEMON Tools Lite.app
[not loaded] com.disc-soft.DAEMONTools.VirtualSCSIBus (1.0.2 - SDK 10.8) [Support]
/Applications/TemperatureMonitor.app
[not loaded] com.bresink.driver.BRESINKx86Monitoring (9.0) [Support]
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxUSB (4.3.10) [Support]
/System/Library/Extensions
[not loaded] com.novatelwireless.driver.3G (2.1) [Support]
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.0.1) [Support]
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.97) [Support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.97) [Support]
[not loaded] com.sierrawireless.driver.SierraSupport (1.4.0) [Support]
[not loaded] com.sierrawireless.driver.SierraSupportKicker (1.4.0) [Support]
[not loaded] com.smithmicro.driver.SMSIWirelessModem (3.2.6) [Support]
[not loaded] net.pocketmac.driver.BlackberryUSB (3.0.11) [Support]
[not loaded] net.pocketmac.driver.BlackberryUSBDev (3.0.11) [Support]
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.1) [Support]
/System/Library/Extensions/SMSIWirelessModem.kext/Contents/PlugIns
[not loaded] com.smithmicro.driver.SMSIWirelessCDC (3.2.6) [Support]
[not loaded] com.smithmicro.driver.SMSIWirelessSerial (3.2.6) [Support]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.rim.BBAlbumArtCacher.plist [Support]
[running] com.rim.BBLaunchAgent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.disc-soft.DAEMONTools.PrivilegedHelper.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.rim.BBDaemon.plist [Support]
[not loaded] org.virtualbox.startup.plist [Support]
User Launch Agents: ℹ️
[invalid?] com.tencent.xin.WeChatHelper.plist [Support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
uHD-Agent UNKNOWN (missing value)
Google Drive Application (/Applications/Google Drive.app)
MacFortHelper UNKNOWN (missing value)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
Default Browser: Version: 600 - SDK 10.10
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
JavaAppletPlugin: Version: Java 7 Update 67 Check version
User internet Plug-ins: ℹ️
BlueStacks Install Detector: Version: Unknown
OctoshapeWeb: Version: 1.0 - SDK 10.8 [Support]
Safari Extensions: ℹ️
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      5% WindowServer
      0% BBLaunchAgent
      0% AppleSpell
      0% fontd
      0% Google Drive
Top Processes by Memory: ℹ️
241 MB Safari
172 MB mds_stores
155 MB com.apple.WebKit.WebContent
120 MB spindump
103 MB Google Drive
Virtual Memory Information: ℹ️
11.13 GB Free RAM
3.86 GB Active RAM
998 MB Inactive RAM
1.19 GB Wired RAM
2.15 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 13, 2014, 08:10:23 AM Self test - passed
Dec 12, 2014, 03:44:20 AM com.apple.WebKit.WebContent_2014-12-12-0...diag [Details]
Dec 11, 2014, 11:05:33 PM RimAlbumArtDaemon_2014-12-11-230533_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:23 PM RimAlbumArtDaemon_2014-12-11-230523_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:12 PM RimAlbumArtDaemon_2014-12-11-230512_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:02 PM RimAlbumArtDaemon_2014-12-11-230502_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:55 PM RimAlbumArtDaemon_2014-12-11-230455_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:42 PM RimAlbumArtDaemon_2014-12-11-230442_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:30 PM RimAlbumArtDaemon_2014-12-11-230430_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:20 PM RimAlbumArtDaemon_2014-12-11-230420_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:11 PM RimAlbumArtDaemon_2014-12-11-230411_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:06 PM RimAlbumArtDaemon_2014-12-11-230406_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:03:57 PM RimAlbumArtDaemon_2014-12-11-230357_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:37 AM RimAlbumArtDaemon_2014-12-11-101037_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:26 AM RimAlbumArtDaemon_2014-12-11-101026_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:16 AM RimAlbumArtDaemon_2014-12-11-101016_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:08 AM RimAlbumArtDaemon_2014-12-11-101008_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:59 AM RimAlbumArtDaemon_2014-12-11-100959_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:44 AM RimAlbumArtDaemon_2014-12-11-100944_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:34 AM RimAlbumArtDaemon_2014-12-11-100934_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:31 AM RimAlbumArtDaemon_2014-12-11-100931_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:53:22 AM SystemUIServer_2014-12-11-095322_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:03:41 AM discoveryd_2014-12-11-090341_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:02:02 AM discoveryd_2014-12-11-090202_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:00:58 AM RimAlbumArtDaemon_2014-12-11-090058_Pauls-Mac-Mini.crash
Dec 10, 2014, 09:55:37 PM QuickTime Player_2014-12-10-215537_Pauls-Mac-Mini.crash

IDEAPAD V460 - USB port disconnects randomly

Hi Community,
I am in a trouble with my IDEAPAD V460, 59 - 044185 (4th one from the beginning) which I purchased around a couple of years back. It was working fine without this annoying issue until recently. This partiular model comes with three USB ports, two on the left side, one on the right side.Since around last 15-20 days, any device plugged into any one of the two USB ports on the left hand side of the laptop is getting disconnected randomly. I use an iBall 4*1 USB hub to connect one keybaord, one mouse and one modem to any one of the USB ports on the left side. Initially I thought it to be a software issue. But reinstalling the OS or even switching over to other OS did not solve the issue. To probe more, I refrained from using the hub and connected two of the mentioned devices directly to the left side ports. Still, the problem persists, but the frequency of disconnection is less. Sometimes, the devices gets reconnected, sometimes do not. That is also in a random fashion.
One of my friend having a Y500 model also having similar issue. As you can understand, given the number of USB devices we use everyday, it's hampering my day-to-day activity.
Two years being passed, I am out of warranty. I found that there are so many people around here also having same or similar issues. Presently, my perception is that those to USB are not being able to pull out enough power to maintain +5V and causing this random disconnect. Any idea what to do?

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
Please confirm if your experiencing same issue when you connect USB device on right side USB port
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Closed-lid mode USB devices disconnect randomly

I just recently connected my MacBook Pro to my Samsung DLP HDTV and started running it in closed-lid mode so my TV is the primary/only display. I also have an external hard drive (USB), external mouse (wireless with USB toggle) and the new Apple bluetooth keyboard.
The problem I have isn't entering the closed-lid mode. But once in closed-lid mode (after a short period of time) all of my USB devices disconnect and then reconnect. I know this because I get an error saying that my hard drive was removed improperly (please eject before disconnecting, etc) and I also get a message from my mouse software saying that my mouse has been disconnected. But then they reconnect themselves (hard drive shows up again on desktop and mouse software informs me that the mouse is present again).
Has anyone had this problem before where USB devices disconnect in the closed-lid mode? I just upgraded to Leopard (formatted the drive and started from scratch). I never tried this within Tiger so I don't have that for a reference. This is really annoying because I have my entire music collection on the external hard drive and it just stops playing when this happens and I have to restore the path to my music collection within iTunes' preferences (it defaults back to ~/Music/iTunes/ when it figures out that the hard drive is no longer there).
The strange thing about this is that when I don't run in closed-lid mode this never happens. I'll be more than happy to provide more details if needed. I greatly appreciate your help.
Thanks!
Mike

i appear to have the same problem under Vista (via Bootcamp) on MBP (2007). i close the lid, and 5-20min later i hear the sound a USB device makes when it disconnects, and a minute or 5 later it reconnects. i don't actually have any USB devices plugged in, but there are several components in the MBP that are connected internally via USB (DVD drive, etc).
what's almost as annoying is that the LCD backlight will come back on of its own accord, even though the MBP's been idle for more than the LCD/backlight time-out period. after the next idle timeout it turns off, only to turn back on againa while later. i see this under OSX & Vista.

Why is my USB mouse disconnecting and reconnecting?

Our USB mouse has been disconnecting and reconnecting intermittently. There doesn't seem to be any rhyme or reason for it. We're using a Logitech Optical Mouse. It doesn't seem to matter which USB port it is plugged into. Occasionally when it becomes unconnected and doesn't reconnect, unplugging and plugging it back in will "fix" it. I've been using HardwareGrowler to keep track of this. This was occurring before we updated to 10.7. I may be imagining this but it does seem to occur more when it is running hot.
Thanks

I have yet to try a different USB mouse to see if it is the mouse itself. I did plug in my iPod and there seems to be no problem with connection there. The mouse will disconnect regardless of tempature and it seems to disconnect more during heavy usage (gaming).

I pod touch turns off. sometimes comes back on after several hours but keeps doing it again a day later.

my sons i pod touch started turning itself off wouldnt come back on took it back to shop were purchased they sent to apple after a month finally got it back wednesday. after 1 day its doing the same thing. sometimes if its left for several hours i can get it back on but it keeps happening after only a few hours of use. its up to date on software. hope someone can help because i think i shop will try and fob me off because typically it worked fine when they pluged it in to their system. thanks in advance

Is the battery fully draining and is that why it is turning off?
Otherwise try the standard fixes:
- Reset,. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
Then time for an appointment at the Genius Bar of an Apple store.

Hp 620 connection randomly lost,after restart sometimes comes back then goes again

Randomly wireless connection goes away.And says not connected and no connection available.Wireless button stays always white and doesnt respond . After restart sometimes connection comes but then goes again after 1-2 minute.Network adapter looks like works fine.there is no sign on that.but i cant connect to the internet via wifi. I dont know what to do . Please help me to solve this problem

@ayazgurbanov
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Retina MacBook Pro fan very loud and usb mouse disconnecting when restarting the computer

2 days ago, I got a brand new retina MacBook Pro 13 inch with the specs 2.8 GhZ i7, 8 gigs of ram and 512gb ssd. It should definitely be functioning properly since it's a really expensive computer, but I already noticed a few problems that I hope you can help me with.
So first of all, when I play World of Warcraft, the fan seems to go up to 6000rpm and is very loud. I checked the activity monitor and it says WoW is using about 60% CPU, so it shouldn't have to be that loud. I also installed smcfancontrol, but it doesn't seem to lower the speed of the fan.
I ran an apple diagnostics test and it couldn't find any problems, and I also tried resetting my smc, but the fan is still going very loud.
And the second problem I have is, that when I have my mouse usb connected to my Mac, and I restart it, it can't detect the mouse anymore. So I'd have to pull out the usb plug and put it back in everytime I turn on my computer. isn't it supposed to automatically connect to my mouse when it's already plugged in?

Matt,
Try reading this, then go to the section on Resetting the SMC for a Macbook Pro with a battery you should not remove.
http://support.apple.com/kb/HT3964

WRE54G Disconnects; Red Light Comes Back On Hours After Seeing 2 Blue Lights

Does anyone have a fix for this problem? My WRE54G shows 2 blue lights, works fine, but within a few hours it disconnects and one red light shows. This forces me to unplug and then plug back in the WRE54G, and reboot my computer.
What is causing this intermittant failure? How do I eliminate this?
Message Edited by buntaro on 04-09-200710:34 PM

Since I did not have any responses to my query, I engaged a Linksys tech in an email chat session last Friday afternoon to have a go at the problem. Essentially he walked me through the usual diagnostics, device firmware version levels, etc., and I would be happy to send you a copy of that session if you think it would be of help to you (just agree to ignore my typo's!).
For reference, I am running the following configuration:
- Two Dell PC's each running XP with all current patches applied.
- Full Linksys wireless network with their WRT54GL, V1.1 router, the WRE54G range expander, a WPSM5G USB print server (connected to a Brother MFC 820CW printer), and an SB5120 Motorola cable modem.
- All Linksys devices are at current firmware levels.
- Secured network (WPA-Personal):
After the chat session, I made the following changes:
- Re-installed the expander firmware...just in case (my idea).
- Found my remote PC set to work on wireless "B" or "G" and changed it to match my router on "G" only (this was my error as I intended to run "G" only throughout).
- Changed the router and expander from channel 6 to channel 11 (the tech recommended that I "try" channel 1 or 11).
So far (knock on wood), my expander has remained "on" (2 blue lights) even through a short commercial power failure this afternoon).
Hope this helps a bit...best of luck!

Firefox keeps "Not Responding" randomly, then comes back after 10-15 Seconds.

Every now and then, when I'm on Firefox it will not respond then the window will fill white and at the top it will say "Mozilla Firefox (Not Responding)".
It responds after about 10-15 seconds but this keeps happening every 2-3 Minutes and is making Firefox unusable to watch videos on Youtube and read other things as when it starts responding it take me back to the top of the page.
I cannot pinpoint which websites this is on but it normally (But not always) happens when I have more than one tab open (Usually on Youtube + SammyServers.com)

I'm already sick enough of this problem over the past few weeks that I was ready to switch to Chrome, but thought that I would check Firefox support first.
If there isn't a fix soon, I'll definitely be switching. I've not had problems like this with Firefox before, but this is very disruptive.

Nokia Lumia 930 - random restarts - comes back eve...

Hi,
My Nokia Lumia 930 has a problem with random restarts, the problem occurs randomly, and I can go for a few days without restarts, and then suddently it will restart several times within an hour.
I have tried to reboot the phone, and I have reset it to default several times, but the problem returns.
Software is:
Lumia Denim
Firmware Update Notifier 1.2.12.1
Glance PinBoards App Agent 1.3.1.7
Lumia First Use Experience 1.11.2.1
Lumia Share 2.5.1.0
Rate Us 2.8.0.0
Silent Installer 1.6.0.6
SIM Unlock 1.0.0.5
SMS vCard Receiver 1.2.1.7
SpamFilter 1.9.3.1
Ram: 2 GB
Manufacturer Name: RM-1045_1006
Mobile Operator: 000-33
Configuration Id: 1006.01B8E5
Core Build ID: 9031.16 (02540.00019.15053.26000)
IMEI-SV: ...................................
BSP Release: 2540.0019
Active Customer Configuration: 11841
Master Configuration Label: 14w51_1
Preloaded Content Label: 14w51_1
Application Version: 3.14.7.4
Build Creation Date: 02-02-2015
Model: RM-1045
OS Version: 8.10.14234.375
Firmware Version: 02540.00019.15053.26004
Hardware Version: 2.0.0.0
Radiosoftware Version: 201c110.00039.0001
Chip-SOC version: 8974
Is it possible to extract som logs, to analyze what is going on?
I have had 2-3 restarts today, and the same yesterday.
I intendedly did not reset to default, as it is a long process and not a fun thing to do every second month - please if anyone can help to solve this problem, I really hope, because I would like to keep Windows Phone, but if this is not resolved, I will find something else (My previous Lumia 920 had the same problem).
I can live with the short battery life so far, but the restarting problem is a huge problem for me.
Best Regards,
Brian

The remaining DIY option for you is to try the Windows Phone Recovery Tool. That will completely wipe your phone and perform a clean install of the firmware, so you need to back up beforehand. Failing that, the next step would be submitting the handset to a Nokia Care facility to be checked / repaired. AFAIK there are no consumer tools available to extract logs from the handset.

10.6.7 usb mouse freezes

Greetings
I have a USB mouse ive been using since optical mice were invented.
I upgraded to 10.6.7 and the mouse works fine, then it stops. i pick it up, and it works again, it's like it goes to sleep. no light no power. then it works.
I have multiple monitors, and the usb mouse is plugged into the back of one of the monitors. I really see it stop when i switch monitors or try to scroll on a web page. a sudden click then it freezes and starts again. As long as Im in one window, it seems fine, but if i go to another application or click somewhere else it jumps. Which makes me think it's not hardware and it had something to do with a recent update.
here is some relevant info;
USB High-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x3a3a
PCI Revision ID: 0x0000
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Hub:
Product ID: 0x9126
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.00
Speed: Up to 480 Mb/sec
Location ID: 0xfd300000
Current Available (mA): 500
Current Required (mA): 100
Microsoft 3-Button Mouse with IntelliEye(TM):
Product ID: 0x0040
Vendor ID: 0x045e (Microsoft Corporation)
Version: 3.00
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Location ID: 0xfd330000
Current Available (mA): 500
Current Required (mA): 100
Keyboard Hub:
Product ID: 0x1006
Vendor ID: 0x05ac (Apple Inc.)
Version: 96.15
Serial Number: 000000000000
Speed: Up to 480 Mb/sec
Manufacturer: Apple, Inc.
Location ID: 0xfd310000
Current Available (mA): 500
Current Required (mA): 300
Apple Keyboard:
Product ID: 0x0220
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.71
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple, Inc
Location ID: 0xfd312000
Current Available (mA): 100
Current Required (mA): 20
Display Audio:
Product ID: 0x1105
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.11
Serial Number: 2C375C02
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfd340000
Current Available (mA): 500
Current Required (mA): 2
Display iSight:
Product ID: 0x8508
Vendor ID: 0x05ac (Apple Inc.)
Version: 2.61
Serial Number: 8JA992E65BRZ3A00
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfd350000
Current Available (mA): 500
Current Required (mA): 500
Apple LED Cinema Display:
Product ID: 0x9226
Vendor ID: 0x05ac (Apple Inc.)
Version: 2.93
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfd360000
Current Available (mA): 500
Current Required (mA): 2
Hub:
Product ID: 0x911f
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.01
Speed: Up to 480 Mb/sec
Location ID: 0xfd100000
Current Available (mA): 500
Current Required (mA): 100
Apple Cinema HD Display:
Product ID: 0x921e
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.35
Speed: Up to 1.5 Mb/sec
Location ID: 0xfd130000
Current Available (mA): 500
Current Required (mA): 2

greetings
I have cured my illness but I had to amputate the leg.
I have 4 monitors each has their own USB. My newest monitor has a high Speed USB bus. i disconnected the older models and kept the High speed usb bus with just keyboard and mouse. The mouse is zippy and fast again.
I realized something was failing when i plugged the mouse into an older display, when the jitter started the mouse totally failed and would not come back. little blue tooth mouse came in handy.
I'll run some more test.
-j

T60 USB Mice has random disconnect, needs to be plugged back in

We have a bunch of T60's here, and we use Lenovo USB mice with them. What happens is, at any given moment, the mouse will stop working. The user just unplugs and plugs the mouse back in (Port Rep or directly into machine). This usually works, but sometimes requires the mouse to be swapped out. Then that old mouse will work somewhere else.
It's a very weird problem, and was wondering if anyone has a solution? I did some reading up and found other people with this problem, didn't find much of a solution though.
Any help appreciated, thanks.

Try setting usb in bios - config - usb to always on or powered and in device manager remove the tick on usb hubs allowing windows to turn them off.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

My wireless mouse disconnects after a long sleep, and only rebooting machine makes it come back.

My wireless mouse disconnects after a long sleep time, always overnight, and pushing buttons, replacing batteries, etc. doesn't wake it up again. I have to reboot the machine, sometimes losing data, in order to make it work again. I am kinda new to mac, so hopefully I am just missing something easy.

Maybe something here will help:
https://discussions.apple.com/message/15090955#15090955
Regards,
Captfred

USB mouse disconnects randomly, sometimes comes back

Similar Messages

Maybe you are looking for