Usb mouse do not work after hibernate

After upgrading to Mountaim Lion a few days ago, most often my USB mouse (a Logitech one) does not react after hibernating. Any ideas why & how to correct?

Hi mate,
did you already tried this:
Open start and type Device Manager and then hit enter, to start the device manager. Click the + next to "Universal Serial Bus controllers" and then in that list, you should see some devices called "USB Root Hub". For each of those, right-click, hit properties, go to the Power Management tab, and uncheck the box next to "Allow the computer to turn off this device to save power." Then restart.
Maybe it works. Another workaround could probably be this Microsoft KB document:
http://support.microsoft.com/?scid=kb%3Ben-us%3B812946&x=8&y=9
Greetings

Similar Messages

Satellite A110-228 LAN does not work after hibernate

Well, subject says it all, really. The LAN (wired) network does not work after hibernate.
It seems it cannot find the DHCP server, so after a while it gets a 169.* address.
After a reboot, the network functions as usual (gets a IP address from the DHCP server)
Tried the usual things, disconnecting the cable, disabling the LAN device, battery or AC adapter, the behavior is reproducible.
The wireless network will be restored after a hibernate.
It needs a little help though (right click on the icon and "recover" or whatever it is called in English)
Any suggestions?
Wilm Boerhout

Hi guys
In the Toshiba HW setup which is placed in the control panel the options Wake-up on LAN and Built-in LAN should be enabled.
I think the options are disabled by default.
Furthermore the default setting for Wake on Settings is OS controlled. To use the Wake-up on LAN function under power off mode, in the device driver for the network card under the menu point Wake On Settings the Value Wake on Magic & Directed must be set.
Please check this how to enable WOL (first time use):
1. Go to [Start] -> [Control Panel] -> [Toshiba HWSetup] -> [LAN] tab
2. Enable Wake-up on LAN
3. Click [Apply]. System will request to reboot.
4. After the reboot go to [Start] -> [Control Panel] -> select [System]
5. On system properties dialog box select [Hardware] tab -> click [Device manager]
6. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
7. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
8. Press [OK] to close the dialog box.

USB mouse does not work

hi All
I bought a new HP laptop few days ago,when I installed Win7 pro on it after a few minutes, the usb mouse stopped working. Its light still lights up ,but the cursor does not react. The drivers of the device are installed and working properly. the mouse will
not work until I click "scan for hardware changes"in Device Management . but when I restart the computer, it happend again . but win7 home edition seems does not have this problem. please help. thanks

Hi,
I suggest updating the latest BIOS and chipset from HP site, then reinstalling USB controllers to check the result. If any USB hub is used, please bypass it.
http://blogs.technet.com/b/asiasupp/archive/2010/11/23/error-message-one-of-the-usb-device-attached-to-this-computer-has-malfunctioned-and-windows-does-not-recognise-it.aspx
Also, please perform
clean boot, disable your antivirus and firewall
temporarily to avoid any blocking. If the issue persists in clean boot, test the issue in Safe Mode and Device Clean boot.
Device Clean Boot
1. Go to Device Manager
2. Expand "Sound, video and game controllers".
3. Right Click on Audio device and choose disable.
4. Please use the same method to disable other dubious hardware such as: internal modem, and CD-R drive. Please note some devices such as video adapter are not available
to be disabled.
5. After that, restart the computer and then test the issue. If it does not occur, you can enable the device one by one to narrow down this issue.
After you found the device that causing the problem, you can resolve by installing last driver or replacing the device.
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Hp pavilion g6-2305tx left side usb 3.0 not working after installing windows 7 home premium

Hi ,
The left usb ports are not working on my pavillion g6 2305tx after a fresh win 7 installation. Already installed chipset drivers, but this doesnt solve the problem.
Please check the screenshot below.
Kindly help.
Thanks

Hi,
Please try installing window 7 USB 3.0 driver for the following issue
For Win 7 64 bit
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?
cc=us&lc=en&dlc=en&softwareitem=ob-102571-1
For Win 7 32 bit
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescript
ion.jsp?
cc=us&prodSeriesId=5260575&prodNameId=5260578&taskId=135&swItem=w
k-106309-1
Regards,
Sumit
I am an HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
Click on Kudos if my post helped you.

T420 USB Ports do not work after installing XP

Hello my office has been using Lenovo's for some time now but we recently purchased a T420 and installed Windows XP SP3 on it. The issue we are having is that the uSB ports do not work. I have tried every driver I can find but still no luck, can anyone help?

hey chris0277,
could you check in Device Manager and see if there is any ? or ! symbol on the USB area.
If there is, i do recommend uninstalling the drivers from it and then visit http://support.lenovo.com and update your unit
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

After updating latest security update for my OSX 10.7.5 one of my usb port is not working now.how do i know what is cause that usb port is not working after security update

one of usb port in my macbook pro havent work after i ve updated latest security update for osx 10.7.5, how do i know what is cause that usb port is good or bad

On a Mac running v10.7.2, the only way to reinstall Safari is to reinstall OS X using OS X Recovery.
Safari 5.1.1 is for Snow Leopard. It will not run on a Mac with v10.7 installed.

Custom kernel (2.6.31) - USB Mouse & Keyboard not working [solved]

So I've just recompiled the new kernel (2.6.31) as a custom, as is my custom!
USB Mouse and keyboard no worky (but do as PS/2).
As a quick thing to check - what kernel .config settings haven't I enabled properly? A quick check though and everything SEEMS to be in order.
The stock 2.6.31 kernel works fine with the USB inputs.
Thanks in advance.
[solved] I realised I was operating off an older kernel26 package (2.6.30), so synching abs and rebuilding using the 2.6.31 package and leaving a few more stock options enabled, seems to have worked.
Last edited by sultanoswing (2009-10-12 11:46:36)

sry, idk how to get the error output of a compiled package via mkpkg. i know its a weird error...
has anyone tryed to open my kerenel configuration with a graphical cofiguration font end, and to see if the 3945 wireless module is marked as module? when i do it its not aviable. maybe today ill find some time to do the config and compile...
my arch: x86 ; core duo; pentium m (kernel-processor-type); -march=prescott -O2 -pipe -fomit-frame-pointer
yeah, config from testing *.31 works fine, but the job needs to be done to strip out all useless stuff out of that general kernel

USB headset does not work after upgrading to Yosemite

I upgraded MacBook Pro 13" retina to Yosemite and lost Logitech PC Headset 960 sound.
System preferences shows it in input and output, but no sound.
After I plug in and out headset I loose even internal sound for Spotify.
When headset is plugged in Youtube videos on Chrome stops playing, when I take them out - video resumes.
Hardware should be ok, because I have 2 pairs of such headset (both of them are not working) and the same hardware on Windows 7 (bootcamp) do work with headset perfectly.
Have anyone the same/similar problem. Does anyone has solution? Should I migrate back to Maverick and how to do it?
Already reset everything what was recommended to reset etc.

1. System Preferences > Sound> Sound Effects
Play sound effects through:
Select Logitech/headphone and then back to "Selected sound output device".
2.Launch iTunes and play a song through headphone and adjust the volume.

USB device does not work after sleep

The problem in the following:
X230t in tablet mode,
connect to the USB port of the adapter USB to COM Port (ftdi232) all works fine,
but if not disconnect the adapter from the USB port and put the laptop into sleep (or hibernation) the following inclusion is not determined USB adapter (or other device) and does not work pen (stylus)
until you restart the laptop.
What to do?
How to fix it?
Please help, this is terribly annoying.

Thank you friend, I do not work and a stylus. Since he is also on usb!
Lenovo and for some reason does not want to fix it.

Wireless mouse does not work after installing new batteries

I have a PowerBook G4 and have been using a wireless mouse and keyboard. The batteries needed to be replaced in my mouse. I successfully installed new batteries. The mouse will turn on. The LED blinks. But the mouse is not functioning. I must use the finger pad on the machine. I double checked the battery installation and even set-up the mouse as a device again. When I turn the mouse off, I get a "connection" lost window on the screen. I have tried
clicking the mouse to re-establish connection with no luck.
Any suggestions?

http://docs.info.apple.com/article.html?artnum=86468
I had the same problem today - go to the above URL and follw precisely the instructions - after you delete the current mouse settings from your bluetooth preferences - apparently you have to sometimes reinstall the mouse after changing batteries - however I changed them before and did not need to do this
hope this helps

My Apple USB mouse is not working with Mac OS X 10.6.8

Any ideas?
My USB Mighty Mouse is no more working with my Mac (OS X 10.6.8). I haven't used it for long, but now it doesn't work anymore.
When I plug it into the USB port, Mac does recognize it but it seems like frozen. Red light under the mouse is on, but no signs from the mouse.
I checked in the system profiler and the mouse appears among the USB hardware, as
Mouse Apple Optical USB Mouse
Product ID:          0x0304
Supplier ID:          0x05ac (Apple Inc.)
Version:           1.10
Speed:          Until 1,5 Mb/sec
Produttore:          Mitsumi Electric
ID posizione:          0x04100000 / 2
Corrente disponibile (mA):          500
Corrente necessaria (mA):          100

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Wecam and USB mic input not working after upgrade to Lion

The audio inputs (micraphones) all show up in Syetem Preferences but if I talk into the microfones (on USB soundcard/Trust Webcam) no levels are being shown, I have tried clicking on eatch input it turh but n luck.
I am getting the impresion Lion broke lots of audio atuff so dont hold up mutch hope for a solution (Except upgrading to Snow Leperd).
Any ideas,
Ben

Beginning with Leopard, Mac OS X supports the so-called UVC web-cameras, you do not need any driver for them. I have just bought a small, pretty and cheap one, Logitech C110.
My older Genius 1321 is unfortunately unusable from SL onwards, but works with Tiger and Leopard. It is not UVC, and drivers are not available any more.
conclusion: if your camera is not UVC will not work via ‘plug-and-use’, you need an updated driver, check with the manufacturer. If they do not offer any, buy a UVC one, they are very cheap, but you do not need anything. The one I have just bought works fine, and also has internal mic.

My Trackpad or USB mouse will not work

Hey,
I'm running a power book G4 on version 10.3.11.
I started to notice erratic behavior with my track pad. It wasn't clicking on anything I was trying to select. Then all of a sudden it completely went. I can move the curser around the page fine but when I try and click on something nothing happens. It's like I am not clicking on the track pad at all.
I'm pretty sure it's not the track pad as the exact same behavior happens when I use a USB mouse.
I've also run a Hardware test and nothing has come back as being faulty.
Can anyone tell me what this could be? Maybe I need to update my operating system? Or there is something wrong with the board that actually reads the ram in my power book?

http://discussions.apple.com/thread.jspa?messageID=8669772&#8669772
This issue came up for me over the weekend on December 20th.
Tried reset of trackpad with palm. - No improvement.
PMU reset - No improvement.
PRAM reset - No improvement.
Disassembly and cleaning - No improvement.
USB mouse and trackpad have same symptoms:
erratic jumpy mouse cursor and clicks not registering correctly.
Used Diskwarrior to repair "keys out of order" problem. - No improvement.
Noticed desktop wallpaper switching rapidly.
Took PB to Apple Store - Genius booted to his portable HD and problem not evident. Concluded software problem, not hardware. Tried to delete mouse prefs but couldn't find them.
Genius recommended "archive and install."
SOLUTION
"Archive and Install" from Tiger update disk. - Problem fixed.
Ran software update - used combined OSX update. - Problem still fixed.
Looks like my problem was a software glitch. Kudos to the Genius for good advice.

Yoga 13 - three fingers gestures not working after hibernate in Windows 10

After hibernation in the Windows 10 do not work with three fingers gestures:
1. Swipe up to activate the new Task View
2. Swipe down to minimize all active windows
3. Swipe left and right to activate switching between apps
Not only operate the new Windows 10 gestures. All other gestures, including tap with three fingers to work.After rebooting, the problem disappears. It helps to reinstall the drivers. But after hibernation problem recurs again and I need to reinstall the driver. После гибернации на Windows 10 перестают работать жесты тремя пальцами:
1. Свайп вверх для включения Task View
2. Свайп вниз для сворачивания всех окон
3. Свайп влево и вправо для переключения между приложениями
Не работают только новые Windows 10 жесты. Все остальные жесты, включая тап тремя пальцами, работают.После перезагрузки проблема не пропадает. Помогает переустановка драйверов. Но после гибернации проблема повторяется и мне нужно снова переустанавливать драйвера.

We had the same problem of wi-fi not appearing at all in network connections, with a newly bought Lenovo Yoga 2 13 with Realtek wireless just upgraded to Windows 10, and after a lot of tinkering managed to get it working. We did three things at the same time, which between them fixed it:1. Installed the Intel Chipset drivers for Windows 10 (from Lenovo's support site)2. Did a HARD/FULL SHUTDOWN (hold SHIFT when clicking shutdown), bypassing Windows fast hybrid shutdown.3. Accessed the BIOS, turned Wi-Fi setting in the BIOS off and on and saved settings (there's a button on the side to access the BIOS) I suspect the combination of 1 and 2 fixed it (with the FULL shutdown being key!), because I can't see just accessing the BIOS doing much, but thought I would list all 3 just in case! Sorry for not being more specific, but I hope this helps someone!

USB Ethernet port not working after ML install

After installing ML I cannot get the USB Ethernet port to work. Have searched for andriod file transfer agent but cannot locate it as previously mentioned.

Same Problem over here. Has anyone a good idea how to fix this problem?
After installing ML i cannot get my original Apple USB Ethernet port to work (Macbook Air 2011).

Usb mouse do not work after hibernate

Similar Messages

Maybe you are looking for