Usb mouse double click

Hi,
Im using fluxbox as window manager and after some upgrades the mouse very often doing double click, if I click only once. On touchpad is all right, so I dont know where is the problem. I tryed change xorg configuration - other protocol and some options, but nothing helped. I also tryed change speed double click, but nothing changed too.
My xorg config is now:
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
generated by hwd
Thanks for all replies
edit: I have kernel 2.6.33.4 and before in kernel 2.6.33.3 "mouse bug" was there too.
Last edited by aivi (2010-05-15 11:47:40)

edit: So Its not working well, xev show still that I pressed and released twice button, any ideas?
In blackbox too. Its somewhere else.
--------So it was by .fluxbox/keys I tried move them somewhere else and restart X and Its working right now. -------
Last edited by aivi (2010-05-15 13:25:12)

Similar Messages

MOUSE DOUBLE CLICKING

I have an hp mouse...however it says product of china on the back..It does look like an hp mouse though..
Anyhow..it's doubleclicking..it's driving me crazy..
I've had the mouse for a few years..
It just starting doing this..
I"m running XP
It is a USB..with a red light under it...with an optical eye?...Not sure if that's what they call it..
Please help..Are there drivers I can use to fix this...
I"m not sure if a windows update..might have done this..
Many thanks..

Hi kittylondon,
I understand your mouse is acting like you are double-clicking even though you are only clicking. Take a look at the following, Troubleshoot mouse double-clicking when you single-click. The document also applies to Windows 7 and Windows Vista, so you will have to make sure you are referencing only the portions that apply to Windows XP. I hope this is of help to you. Best of luck. Have a wonderful day.
Ryan1216
I work on behalf of HP
The advice and opinions given here are my own and not those of HP

FRM-40735 when mouse double click trigger raised unhandled exceptiORA-01722

I am using Forms 10g.
i am writting a procedure in When mouse double click trigger that will display all the values available for ip address from this procedure.
The procedure is
DECLARE
CURSOR cr
IS
SELECT LEVEL NUM
FROM DUAL
CONNECT BY LEVEL<=(Select max_range from t_ip_address_dtl where category_name=:t_item_cpu.category and block_name =:block_head.block)
MINUS
SELECT TO_NUMBER(SUBSTR(IP_address, 12))
FROM T_item_cpu;
abc number(4);
abc1 number(4):=null;
BEGIN
FOR rec IN cr LOOP
abc1 := abc1 || ',' || rec.num;
END LOOP;
Message('You can use between these nos: '||abc1);
Message('You can use between these nos: '||abc1);
END;
It is showing this error :-

Yes bye mistakly i posted ,, due to internet problem..

Why can't I minimise itunes with mouse double click?

why can't I minimise itunes with mouse double click?

I do not know if you can ..
Try -
Command + M .

How to capturing Mouse double click action?

Hi all,
how can we identify the "mouse double click" action?
MouseListener has methods for only mousePressed,released,clicked (single).
Thanks in advance..
Regards
Sojan

Hi,
Thanks it worked ..
e.getClickCount() value increases if we keep on clicking on the component, is there anythning wrong by interpreting double click as
"e.getClickCount() >=2 "?
Regards
Sojan

Distinguishing b/t two single mouse-click and mouse-double-click

Hi,
I am curious to find out how Forms will distinguish between two single when-mouse-click events and a single when-mouse-doubleclick event. Is it simply a timing issue or is there more involved i.e. the 'co-ordinates' of the mouse. Thanks in advance for any opinions given,
regards,
Kevin.

The difference is same as the difference of Apple and Orange.
Its depends on O/S and event management within OS kernel.
You can change the timing in Control panel of mouse double click.

USB mouse single click results in a double-click

Been using a basic USB Dell mouse with my Macbook Pro for a long time. Suddenly I'm finding that a left click is resulting in a double click some of the time, but not always. It's system wide regardless of application. Thoughts? Thank you!

Have you tried reinstalling the driver?
Mouse Problems
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

Erratic mouse double-click problem (OS or Motherboard?)

I have a MacBook
MacBook4,1 / Intel Core 2 Duo 2,4 GHz (2Gb RAM)
I have two mice: Microsoft Wireless Mobile Mouse 3000 v2.0 (bough lately) and a Logitech M-BT-96a (simple 2 buttons with wheel)
I don't know if it is after upgrading to Snow Leopard (10.6.8) but one or the other are causing unwanted double-clicks!
I downloaded Lion but didn't install yet.
The trackpad act also funny especialy with touching to create clicks and double-clicks. I tough first it was because I press to heavely on each side of the trackpad… I changed my position: Same thing.
I have two USB hubs daisy chained. Even when I'm unplugging them… It does the same thing.
Thanks for your help

As best as I can recall, my original eMac mouse lasted maybe a year before both the mouse tracking and the button contact switch began to act erratically. The button contact can wear out. If you still have your original eMac mouse, you've done an amazing job of treating it gently (maybe you can give me lessons --- I end up replacing mice every 2 years or so!).
Can you try another USB mouse? Any third-party three button USB mouse will work as a basic three-button mouse without needing any additional software to be loaded; e.g., the Logitech Prefernce Pane offers more control over features of their mice, but you can do without it and just plug the mouse in.

Magic Mouse: Double-click function

I have "secondary-click"(right) activated on the "magic mouse" and it's great if I want to open a drop-down list on a page.
However, on the "mighty-mouse" which I had before, the "right-click" was set up to act as a "double-click" which was very handy for opening documents and folders etc.
Is there any way to set up the "magic-mouse" so that a "right-click" will act as a "double-click"?

You could try a third-party driver like BetterTouchTool (http://blog.boastr.net/?page_id=1722)

In Yosemite, Magic Mouse double-click function doesn't work

On my iMac running Yosemite 10.10.2, the double-click function on the Magic Mouse no longer works. So to open a folder, or anything for that matter, I must always do click-control ---and that doesn't work for everything. For example, I can't double click on a character in Glyphs, so this renders Glyphs useless. And so on... I have gone into preferences to see if anything was amiss in the settings, but everything checked out fine. Is there a fix for this, or do I have to wait for the next upgrade for Yosemite? Help! Thanks... --Royce

What's the answer to this mouse problem, please? Why does my double-click no longer work on my magic mouse since downloading Yosemite 10.10.2 to my iMac?
What's up Apple?
Mark

Trying to catch mouse double click

Using come code in the API 1.3 documentation, I created a JList and am trying to catch when a user double clicks on an item in the list. I have the following snippet of code:
public void mouseClicked(MouseEvent e) {
if ((e.getClickCount() == 3) && (e.getSource() == list1)) {
int index1 = list1.locationToIndex(e.getPoint());
System.out.println("Double clicked from the left list on Item " + index1);
When I double click on an item in list1, it prints out the output line twice as in:
Double clicked from the left list on Item 1
Double clicked from the left list on Item 1
How can I get it to run the code only once. I'm not sure why it's running it twice. Any Ideas would be helpful. Thanks....
Matt Menard

I've used similar procedure with success in JDK1.3.1. Without seeing the rest of your code, the only thing left for you to experiment with is to call the consume() method if the count is greater than 1. I did notice that Java mouse event handler leaves much to be desired. For example, the mouseentered and mouseexited events kept getting fired even tho the mouse has entered and never leave.
V.V.

USB Mouse Left Click not working, DV6700

I have been using 2 hands to operate the simplist functions on my laptop.
I move the mouse around with my right hand but if I want to click something I have to use the left button under the mouse-pad.
HP support gave me a solution that worked for about an hour (Reset BIOS to default) .
The right click on the mouse (ANY USB mouse) works fine. Its just the select button.
I hate this!
HELP!!!

To CLARIFY:
ANY USB Mouse that I plug into my (DV6700 HP Pavillion) Laptop--- the left click button doesnt work unless I hold it down for over a minute and move it around clicking on and off over and over. It can take 2 minutes before it actually clicks. So, I use the left button under the touch pad. That means its impossible to use this computer for games AND dragging and dropping is weird because I never got used to doing it with a touchpad.
I doubt I will ever buy another HP because of this. I HATE IT!!!
Other USB products act weird too.
I have also deleted all USB components in Control Panel and had windows reinstall them with the wizard.
It worked briefly (couple minutes) then was corrupted again.
Am I supposed to just throw this thing away?

Speed of mouse double click controls also finder

I was wondering why my new macbook pro responded slower than my imac. Then I came across this:
When I single-click on a folder that I haven't opened for weeks. The time that it takes the finder to show the content of a folder is affected by the setting for 'double-click-speed'.
For some reason setting the 'double-click-speed' for the mouse to slow also slows down the speed of 'traveling' through the finder. And setting it to fast speeds up the time of going to the next level in the index.

This is a well known Leopard Finder "Column View" bug - with your post count, I'm surprised you don't recognize the description.
Send feed back or a bug report (for all the good that seems to do for "Finder" bugs).
http://www.apple.com/feedback/macosx.html
http://developer.apple.com/bugreporter/
yada.

JTable & mouse double-click?

hi,
When I double-clicked a row in a JTable ,how can i get one column's value in that row.how can i do with the mouse event.
some examples are preferred.
thankx in advance !
rain

When you say "one column's value in that row" do you mean that you want the value that the user double-clicked?
When you receive a mouse event, get the selected rows and columns from the table, then get the value from the table model using the getValueAt() method.
int[] selectedRows = table.getSelectedRows();
int[] selectedCols = table.getSelectedColumns();
String selectedElement = (String)model.getValueAt(selectedRows[0], selectedCols[0]);
System.out.println(selectedElement + " selected");

Mouse double click on single click

My mouse has been double clicking on a single click since changing to Mavericks 10.9. I have tried different mouse brands from Apple to Rapoo and everything inbetween. I have played with the mouse settings and rebooted, reset the pram and nothing works. It's very frustrating as a graphic designer to be slowed down because of a mouse.
Has anyone ad this problem and has the solution to it?
Thanks

From the menu bar click on Go > (Hold option down) Library will appear, click it.
In the Library goto Preferences
Locate the following files and delete them.
-com.apple.driver.AppleBluetoothMultitouch.mouse.plist
Restart the computer and test.
Hope this helps.

Usb mouse double click

Similar Messages

Maybe you are looking for