USB mouse keeps disconnecting

My USB mice keeps disconnecting under Mavericks. It cuts out for so long that the only solution is to unplug it and immediately plug it back in. That solves it for a short while. If I am in system preferences it will intermittingly say no mouse is connected. It is a Logitech mouse and I have even removed the Logitech drivers as these were having the same problem.

I uninstalled the Logitech drivers and it still did not fix the problem. So I guess I will have to wait till there is an update to Mavericks. With the the problems with iTunes not detecting app updates as well, it will probably be a big update.

Similar Messages

  • USB Mouse Keeps Disconnecting on 13" 2011 MacBook Pro

    Hello!
    My Logitech M100 USB mouse keeps freezing up and/or completely turning off - constantly! About every 5 minutes, the mouse just shuts off (the laser at the bottom even turns off) and it becomes no longer operational. To fix it, I have to unplug it and plug it back in. This solution is good for another 5 minutes.
    Every time my mouse disconnected, I noticed this pop up in the console:
         1/15/12 8:27:32.000 PM kernel: USB Optical Mouse::terminate(kIOServiceSynchronous) timeout
    And, if this is relevant at all:
         1/15/12 8:29:10.000 PM kernel: 0        0 AppleUSBCDC: start - initDevice failed
    I am running Mac OS X Lion.
    Any ideas?
    Thanks a ton in advance!

    Does the mouse work on other computers?

  • Usb mouse constantly disconnects/reonnects

    After the boot camp update to provide audio support for ear phones, I have noticed that my wired usb mouse occasionally disconnects and reconnects with a "de-dunk" sound.  Any thoughts?  Also this is happening on windows 7.

    Greetings Beth,
    Wireless devices are susceptible to interference.  Review this article for common sources: http://support.apple.com/kb/TS3048#5
    They are also very sensitive to low power.  Make sure you are using VERY fresh batteries.  If they have been sitting on a shelf for months they don't count as fresh IMO.
    Troubleshooting steps to try after you read that article at the top:
    Remove the following to the trash: Macintosh HD > Library > Preferences > com.apple.Bluetooth.plist
    Restart the computer and re-pair the mouse and keyboard
    If issue persists reset the SMC:http://support.apple.com/kb/HT3964
    If the issue persists reset the PRAM:http://support.apple.com/kb/HT1379
    Hope that helps!

  • Wireless mouse keeps disconnecting

    My Apple wireless mouse keeps disconnecting about every third time when I put the computer to sleep and wake it up later.  I have to reboot to re-establish the bluetooth connection.  What can I do to fix this?

    There has been a lot of discussion about this.  This thread has many suggestions.  https://discussions.apple.com/message/13074761?messageID=13074761#13074761
    I have had this problem on an off (no pun intended) for a very long time.  Had my mouse replaced once at the Apple Store.  Contacted Apple Care about it also when it first occured.   Sometimes changing the batteries helps.  If I am using rechargeables, Energizers seem to fit best.  In one of the threads, someone showed a photo of how the battery contacts are actually different on different brands and suggested that is one reason this occurs.  I find that resetting the SMC is what eventually I have to do and that is what Apple Care suggested also.  I haven't found a permanent fix yet and I don't really expect to, but doing this does give me much longer periods of time without a recurrence.
    To reset the SMC
    http://support.apple.com/kb/HT3964
    It is annoying.  I keep my old wired mouse close by so I can get to it quickly.
    laverne's mom

  • Usb mouse auto disconnect time and time,Screen flash and flash when I use discrete graphic card

    as title
    My usb mouse auto disconnect and reconnect time and time,
    no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
    Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
    Mouse: Logitec G400/G1
    Display:Lenovo D2081WIDE
    machine:T430 2349 CTO

    system info:
    machine TYPE: THINKPAD T430 /2349CTO
    operating system :Lenovo OEM ultimate X64 SP1
    mouse type:Logitech G400 and Logitech G1
    time:from 2012-10 to now
    threat NO.1
    USB mouse auto disconnect and reconnect time and time,no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
     every time when the mouse disconnect I heard the sound which like USB DEVICE unplug,and when it reconnected I heard the sound which like USB DEVICE plug in.
    threat NO.2
    Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
    threat NO.3
    the battery auto losing capacity!!!!!!
    1% everyday about 0.2Wh
    since I bought to now,
    the Design capacity has losing from 57.XX Wh to 47.52Wh
    and full charge capacity is 48.68.
    the battery info:
    cycle count is 18
    Bar-Code number 1ZKFD27S1RF
    SerialNumber 1896
    First used date 2012-09
    FRU 45N1001
    Firmware 0003-0080-0100-0165

  • H530 Mouse keeps disconnecting

    My mouse just keeps disconnecting and reconnecting all the time, often several times in a row. When it does I hear the sound that comes when you plug in a USB device. I tried different mice and USB ports. Restarting the computer doesn't help. I also unchecked the "allow the computer to turn off this device to save power" option on all the USB controllers as is suggested when you make a search for the issue.
    Here is the funny thing: I closed the HD audio manager task in the task manager because I assumed it didn't serve a purpose. After that, whenever the mouse disconnected, the volume lowered significantly. After rebooting the computer, the audio manager was running again and that problem was gone. I remember deinstalling several programs that came with the systems that looked unnecessary. Before that, I didn't have the problem with the disconnecting mouse. I think I can probably fix it by reinstalling the service or whatever it was that that I deleted that was important.
    Does anyone have an idea what this program could be and where I can find it? Or maybe a list of all the programs that came with the system (Lenovo H530 bought at the 7th of may '14). Or does anyone have another solution to my problem?

    hi Dr_Mario,
    Welcome to the Lenovo Forums.
    Can you try the following:
    1. Boot hte machine in Safe Mode and observe the stock mouse and keyboard: If the unit works fine, perform a clean boot and observe.
    2. Ensure that you have the Black Silk USB driver installed
       - H530 Drivers and Download page
    List of preloaded softwares on the H530 Series
    - Link to picture
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Wireless keyboard and mouse keep disconnecting

    Hello   I have had my imac for about a year and a half (Dec. 2009).  recently (fall 2010- now) the keyboard and mouse are disconnecting.  They do it all the time.  It is starting to interfere with my recording and editing big time to the point where I have to stop working.   I keep them stocked with batteries.  They disconnect at the same time or separately and the mouse is especially hard to get reconnected.  Has anyone found a real solution to this or is Apple just avoiding it by asking for more money and saying our warrantees are up?  You cant even talk to them without paying $50.   Like we didnt pay well over a thousand dollars for our computers.  All I see in the forums is more and more people with the problem and no solution.      Step up apple,   please this is impossible to deal with
          Thanks anyone for any help

    There are things to do with an issue such as this one.
    1. You must ask yourself if this is a hardware issue:
    Try brand new batteries, if that doesn't fix the issue then you must try this.
    Best way to isolate this issue is to boot into the install dvd of your mac osx.
    Why?
    The behavior on the boot disk enviroment is totally different than the operating system while running from the hard disk. If you can recreate the issue there then its a hardware issue.
    If hardware:
    reset the pram (research it)
    If the issue is unable to recreate in the boot disk enviroment but you can in the regular enviroment then you can isolate it to software issue:
    Software troubleshooting:
    1. Remove configuration file for bluetooth:
    10.6: machd/library/preferences
    10.5 userfolder/library preferences
    file: com.apple.bluetooth.plist.
    Reboot.
    A combination of pram reset and plist removal works well. If it may help, use a usb mouse to remove the pairing of bluetooth then readd devices.

  • USB device keeps disconnecting/connecting after upgrading to Windows 8.1

    I have a device(Pedal for Sim Racing) connected via USB, everything is working fine in Windows 7 and 8 but after upgrading my machine to Windows 8.1 the device keeps disconnecting and connecting for like every 2 seconds. But after I open the Property Sheet
    in Game Controllers panel the disconnection issue was gone, if I reconnect the device the issue persist. Other people who have similar device also encounters the same issue after upgrading to windows 8.1. The issue persist with or without the device driver
    installed. 
    Any idea, what might cause this? 
    Best regards
    mark

    I'v got this exact same problem with my Win 7 desktop.  I've also got pedals and wheel but don't see it as different than all the other USB devices.  I'm using a bunch of USB, but no hubs, including 3 external storage hard drives. But the momentary
    disconnect appears in all devices as best as i can see..even my long time trouble free head phones..keyboard..and all.  Sometimes the sound goes away and if I unplug and replug them the sound comes back, and other times I have to exit and re enter the
    game. I also get video crashes ..maybe not related.IDK..and have to restart all, because I've got three black screens in Eyefinity. For years my system was trouble free and its just slowly started getting worse. I've thought it had to do with system "sleep"
    etc but long ago went to never sleep max performance etc..Makes no difference. Keep thinking its my hardware or my house wiring etc..But can't seem to solve it. I replaced my Mobo/chip/ram maybe 6 months ago and that appears to have not helped.  It seems
    to be getting worse. I hate to start replacing parts piece by piece..cost a lot of money and sometimes doesn't help.
    When I'm playing a game I can often hear "faint" sound of USB connect disconnect happening with regularity..that little bing/boink sound etc..So it must just be constantly happening...Seems weird. Didn't have anything like this happening years
    ago with pretty much the same hardware and same Win7 with the continuing updates etc.
    What can be causing this common problem?

  • Why does magic mouse keep disconnecting?

    I've got an Apple Magic Mouse  that is less than one year old and it keeps disconnecting from my Mac Mini.  It just started doing it.  I've put in fresh batteries and restarted the computer.   I've got all the latest operating system software.   Nothing is out of date.   Every couple of minutes it just randomlly disconnects then reconnects and so on, over and over again.  It's only about 2 feet away from my Mac Mini.
    Anybody know what to do?
    Thanks.
    David

    I thank you for your help, Ascendi, but I have no idea what you're saying.  I'm guessing I stand alone, because others do understand.  What I got from it was that the batteries don't fit snuggly, and to shove aluminum foil... somewhere.  I'm don't have a PhD in battery terminal dimensions and their terminonolgy.  But I do appreciate that you helped.
    David / Flashkube2... EXACTLY!  After years and years with my wonderful white Magic Mouse, just today the exact same thing started happening, only I was losing connection every 20 seconds.  Half the time, I'd get it back.  I feared it was a Bluetooth error, or a hacker was "stealing my juice"  So I got online here, read this stuff, wiggled my batteries around (for years and years, I've only used Duracel), and for the last 10 minutes, I have kept connection with Mr. Mouse and Mr. Mac.  Keep your fingers crossed!
    So if this problem arises again, I just stuff aluminum foil in there?  (I'll be a wee bit neater than "stuff").  Speak "positive terminal" and "negative terminal" and "top of the batteries" to me, because "depth of the recess" and "vernier caliper" are Chinese to me.  Does "battery recess" mean how the two batteries sit in its casing?
    Maybe I just didn't have enough coffee this morning.  I'm not ususally shtooo-pid.  (don't go there!)

  • Seagate Expansion 2 TB External USB drive keeps disconnecting

    Hi,
    I just attached a nearly new Seagate 2 TB Expansion USB external drive to my iMac running Snow Leopard, as a Time Machine drive.
    The drive sits idle until Time Machine does a backup. However, the drive keeps disconnecting momentarily - I get the "your drive was not ejected properly" error message, the drive icon disappears for a few seconds, and then the drive reconnects by itself. Happens several times an hour.
    Is this a known glitch? Do I need to replace the drive (it's under warranty, but still a bit of a nuisance)?

    My logs...
    Mar 18 19:11:42: --- last message repeated 2 times ---
    Mar 18 19:11:42 ****-******-mac-mini kernel[0]: jnl: disk1s2: replay_journal: from: 3182592 to: 3252224 (joffset 0x8f25f95000)
    Mar 18 19:11:42 ****-******-mac-mini kernel[0]: jnl: disk1s2: journal replay done.
    Mar 18 19:28:39 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 DisablePolling
    Mar 18 19:28:39 ****-******-mac-mini kernel[0]: disk1s2: media is not present.
    Mar 18 19:28:39 ****-******-mac-mini kernel[0]: jnl: disk1s2: dojnlio: strategy err 0x6
    Mar 18 19:28:39 ****-******-mac-mini kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 8192 bytes to the journal!
    Mar 18 19:28:39 ****-******-mac-mini kernel[0]: jnl: disk1s2: close: journal 0x4efcb10, is invalid. aborting outstanding transactions
    Mar 18 19:28:39 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 overriding stop
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 overriding init
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: GetVendorAndModelIDInfo suceeded
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: probe suceeded bidding for device
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start begin
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 ResetMediumCharacteristics
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 EnablePolling
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s4
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s5
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s6
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s7
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s8
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::EnableSmart: begin
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::EnableSmart: using IssueSmartEnable
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: IssueSAT12Request - begin
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: IssueSAT12Request - SCSITaskStatus 0
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: IssueSAT12Request - returning main line 1
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s9
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s10
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s11
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::Start currentSecurityState = kSecurityNotSupported
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s12
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s13
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 DetermineMediumCapacity start
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 DetermineMediumCapacity results: 0x0200 0xe8e088ae
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 SetMediumCharacteristics
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::Start sending kIOMediaStateOnline message
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s14
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start exit
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: Couldn't alloc class "comseagateFDEBootStrap"
    Mar 18 19:28:52: --- last message repeated 2 times ---
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: jnl: disk1s2: replay_journal: from: 3252224 to: 3305472 (joffset 0x8f25f95000)
    Mar 18 19:28:52 ****-******-mac-mini kernel[0]: jnl: disk1s2: journal replay done.
    Mar 18 19:48:50 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 DisablePolling
    Mar 18 19:48:50 ****-******-mac-mini kernel[0]: disk1s2: media is not present.
    Mar 18 19:48:50 ****-******-mac-mini kernel[0]: jnl: disk1s2: dojnlio: strategy err 0x6
    Mar 18 19:48:50 ****-******-mac-mini kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 8192 bytes to the journal!
    Mar 18 19:48:50 ****-******-mac-mini kernel[0]: jnl: disk1s2: close: journal 0x4efcb10, is invalid. aborting outstanding transactions
    Mar 18 19:48:50 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 overriding stop
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 overriding init
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: GetVendorAndModelIDInfo suceeded
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: probe suceeded bidding for device
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start begin
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 ResetMediumCharacteristics
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 EnablePolling
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s4
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s5
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s6
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s7
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s8
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::EnableSmart: begin
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::EnableSmart: using IssueSmartEnable
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: IssueSAT12Request - begin
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: IssueSAT12Request - SCSITaskStatus 0
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: IssueSAT12Request - returning main line 1
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s9
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s10
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s11
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::Start currentSecurityState = kSecurityNotSupported
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s12
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s13
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 DetermineMediumCapacity start
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 DetermineMediumCapacity results: 0x0200 0xe8e088ae
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 SetMediumCharacteristics
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::Start sending kIOMediaStateOnline message
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s14
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start exit
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: Couldn't alloc class "comseagateFDEBootStrap"
    Mar 18 19:49:03: --- last message repeated 2 times ---
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: jnl: disk1s2: replay_journal: from: 3305472 to: 3358720 (joffset 0x8f25f95000)
    Mar 18 19:49:03 ****-******-mac-mini kernel[0]: jnl: disk1s2: journal replay done.
    Mar 18 20:08:01 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 DisablePolling
    Mar 18 20:08:01 ****-******-mac-mini kernel[0]: disk1s2: media is not present.
    Mar 18 20:08:01 ****-******-mac-mini kernel[0]: jnl: disk1s2: dojnlio: strategy err 0x6
    Mar 18 20:08:01 ****-******-mac-mini kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 8192 bytes to the journal!
    Mar 18 20:08:01 ****-******-mac-mini kernel[0]: jnl: disk1s2: close: journal 0x4efcb10, is invalid. aborting outstanding transactions
    Mar 18 20:08:01 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 overriding stop
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 overriding init
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: GetVendorAndModelIDInfo suceeded
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: probe suceeded bidding for device
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start begin
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 ResetMediumCharacteristics
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 EnablePolling
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s4
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s5
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s6
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s7
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s8
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::EnableSmart: begin
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::EnableSmart: using IssueSmartEnable
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: IssueSAT12Request - begin
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: IssueSAT12Request - SCSITaskStatus 0
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: IssueSAT12Request - returning main line 1
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s9
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s10
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s11
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::Start currentSecurityState = kSecurityNotSupported
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s12
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s13
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 DetermineMediumCapacity start
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 DetermineMediumCapacity results: 0x0200 0xe8e088ae
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 SetMediumCharacteristics
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::Start sending kIOMediaStateOnline message
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s14
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start exit
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: Couldn't alloc class "comseagateFDEBootStrap"
    Mar 18 20:08:13: --- last message repeated 2 times ---
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: jnl: disk1s2: replay_journal: from: 3358720 to: 3411968 (joffset 0x8f25f95000)
    Mar 18 20:08:13 ****-******-mac-mini kernel[0]: jnl: disk1s2: journal replay done.
    Mar 18 20:29:11 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 DisablePolling
    Mar 18 20:29:11 ****-******-mac-mini kernel[0]: disk1s2: media is not present.
    Mar 18 20:29:11 ****-******-mac-mini kernel[0]: jnl: disk1s2: dojnlio: strategy err 0x6
    Mar 18 20:29:11 ****-******-mac-mini kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 8192 bytes to the journal!
    Mar 18 20:29:11 ****-******-mac-mini kernel[0]: jnl: disk1s2: close: journal 0x4efcb10, is invalid. aborting outstanding transactions
    Mar 18 20:29:11 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 overriding stop
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 overriding init
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: GetVendorAndModelIDInfo suceeded
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: probe suceeded bidding for device
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start begin
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 ResetMediumCharacteristics
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 EnablePolling
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s4
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s5
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s6
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s7
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s8
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::EnableSmart: begin
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::EnableSmart: using IssueSmartEnable
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: IssueSAT12Request - begin
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: IssueSAT12Request - SCSITaskStatus 0
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: IssueSAT12Request - returning main line 1
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s9
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s10
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s11
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::Start currentSecurityState = kSecurityNotSupported
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s12
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s13
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 DetermineMediumCapacity start
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 DetermineMediumCapacity results: 0x0200 0xe8e088ae
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00 SetMediumCharacteristics
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00::Start sending kIOMediaStateOnline message
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start s14
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: comseagateIOPowSec00: start exit
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: Couldn't alloc class "comseagateFDEBootStrap"
    Mar 18 20:29:24: --- last message repeated 2 times ---
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: jnl: disk1s2: replay_journal: from: 3411968 to: 3465216 (joffset 0x8f25f95000)
    Mar 18 20:29:24 ****-******-mac-mini kernel[0]: jnl: disk1s2: journal replay done.

  • My macbook pro 15"  usb drives keep disconnecting and transfer speeds become very slow.

    Both the usb drives on my macbook pro 15" (2012 model) have been transferring speeds very slow and when i try to use my harddisk it keeps disconnecting. Please help

    when i try to play games like minecraft and somtimes when im on the internet, ive been doing some research and apparently my cpu is really low, %User: 2.68  %System: 1.87  %idle: 96.74, is that bad? and also it is very quick to charge but like i said cant keep a charge for very long, end up having to charge it almost twice a day

  • My wireless mouse keeps disconnecting.

    Battery shows 76%. Brand new. Any ideas?

    Problem solved. My cordless phone sitting on my computer table was jamming the bluetooth devices. When I disconnected the cordless phone everything worked OK. If you are using wireless devices move them away from the computer.

  • USB mouse freezes

    My USB mouse keeps on freezing. Replugging usualy helps.
    The following is from dmesg.
    [ 1346.754811] usb 1-3: USB disconnect, device number 9
    [ 1347.079690] usb 1-3: new low-speed USB device number 10 using xhci_hcd
    [ 1347.097559] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1347.100026] input: MOON AND as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input27
    [ 1347.100317] hid-generic 0003:13EE:0001.0006: input,hidraw0: USB HID v1.00 Mouse [MOON AND ] on usb-0000:00:14.0-3/input0
    [ 1361.545866] usb 1-3: USB disconnect, device number 10
    [ 1362.584076] usb 1-3: new low-speed USB device number 11 using xhci_hcd
    [ 1362.601087] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1362.603502] input: MOON AND as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input28
    [ 1362.603614] hid-generic 0003:13EE:0001.0007: input,hidraw0: USB HID v1.00 Mouse [MOON AND ] on usb-0000:00:14.0-3/input0
    [ 1952.472524] usb 1-3: USB disconnect, device number 11
    [ 1953.552440] usb 1-3: new low-speed USB device number 12 using xhci_hcd
    [ 1953.570224] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1953.572802] input: MOON AND as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input29
    [ 1953.573044] hid-generic 0003:13EE:0001.0008: input,hidraw0: USB HID v1.00 Mouse [MOON AND ] on usb-0000:00:14.0-3/input0
    I also get
    usb 1-3: device not accepting address 3, error -71
    at boot.
    And the following is lsusb.
    [sameer@Sameer ~]$ lsusb
    Bus 004 Device 003: ID 8087:07da Intel Corp.
    Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 004: ID 0461:4e1d Primax Electronics, Ltd
    Bus 003 Device 003: ID 138a:003d Validity Sensors, Inc. VFS491
    Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 002: ID 0bc2:5031 Seagate RSS LLC FreeAgent GoFlex USB 3.0
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 007: ID 03f0:5607 Hewlett-Packard
    Bus 001 Device 006: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
    Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
    Bus 001 Device 012: ID 13ee:0001 MosArt
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    MosArt is the mouse.
    Last edited by sam34567 (2014-04-10 14:27:45)

    [sameer@Sameer ~]$ sudo cat /sys/kernel/debug/usb/devices
    [sudo] password for sameer:
    T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
    B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
    P: Vendor=1d6b ProdID=0003 Rev= 3.14
    S: Manufacturer=Linux 3.14.0-4-ARCH xhci_hcd
    S: Product=xHCI Host Controller
    S: SerialNumber=0000:00:14.0
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
    T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
    D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
    P: Vendor=0bc2 ProdID=5031 Rev= 1.00
    S: Manufacturer=Seagate
    S: Product=FreeAgent GoFlex
    S: SerialNumber=NA05ND9Y
    C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=144mA
    I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
    E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
    T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
    B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=1d6b ProdID=0002 Rev= 3.14
    S: Manufacturer=Linux 3.14.0-4-ARCH xhci_hcd
    S: Product=xHCI Host Controller
    S: SerialNumber=0000:00:14.0
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
    T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 18 Spd=1.5 MxCh= 0
    D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=13ee ProdID=0001 Rev= 0.10
    S: Manufacturer=MOON
    S: Product=AND
    S: SerialNumber=@ɌAB
    C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
    T: Bus=03 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 5 Spd=480 MxCh= 4
    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=05e3 ProdID=0608 Rev=77.64
    S: Product=USB2.0 Hub
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
    T: Bus=03 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 6 Spd=1.5 MxCh= 0
    D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=1c4f ProdID=0002 Rev= 1.10
    S: Manufacturer=USB
    S: Product=USB Keykoard
    C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 98mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
    I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
    E: Ad=82(I) Atr=03(Int.) MxPS= 3 Ivl=10ms
    T: Bus=03 Lev=02 Prnt=05 Port=03 Cnt=02 Dev#= 7 Spd=480 MxCh= 0
    D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
    P: Vendor=03f0 ProdID=5607 Rev=11.00
    S: Manufacturer=HP
    S: Product=v210w
    S: SerialNumber=AA00000000005595
    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
    I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=31875us
    T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
    B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
    P: Vendor=1d6b ProdID=0002 Rev= 3.14
    S: Manufacturer=Linux 3.14.0-4-ARCH ehci_hcd
    S: Product=EHCI Host Controller
    S: SerialNumber=0000:00:1d.0
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
    T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 6
    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=8087 ProdID=0024 Rev= 0.00
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
    T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
    D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=8087 ProdID=07da Rev=78.69
    C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr= 0mA
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
    I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
    I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
    I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
    I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
    I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
    T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
    B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
    P: Vendor=1d6b ProdID=0002 Rev= 3.14
    S: Manufacturer=Linux 3.14.0-4-ARCH ehci_hcd
    S: Product=EHCI Host Controller
    S: SerialNumber=0000:00:1a.0
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
    T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 6
    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=8087 ProdID=0024 Rev= 0.00
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
    T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
    D: Ver= 1.10 Cls=ff(vend.) Sub=11 Prot=ff MxPS= 8 #Cfgs= 1
    P: Vendor=138a ProdID=003d Rev= 1.04
    S: SerialNumber=00a0dadbed8d
    C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
    I:* If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=4ms
    T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=480 MxCh= 0
    D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=0461 ProdID=4e1d Rev=21.07
    S: Manufacturer=Primax Electronics Ltd.
    S: Product=HP HD Webcam [Fixed]
    S: SerialNumber=PMX02
    C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
    A: FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
    E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=4ms
    I:* If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    I: If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    E: Ad=81(I) Atr=05(Isoc) MxPS= 128 Ivl=125us
    I: If#= 1 Alt= 2 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    E: Ad=81(I) Atr=05(Isoc) MxPS= 256 Ivl=125us
    I: If#= 1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    E: Ad=81(I) Atr=05(Isoc) MxPS= 800 Ivl=125us
    I: If#= 1 Alt= 4 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    E: Ad=81(I) Atr=05(Isoc) MxPS=1600 Ivl=125us
    I: If#= 1 Alt= 5 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    E: Ad=81(I) Atr=05(Isoc) MxPS=2400 Ivl=125us
    I: If#= 1 Alt= 6 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    E: Ad=81(I) Atr=05(Isoc) MxPS=3072 Ivl=125us

  • Can anyone explain why my Apple Wireless mouse annoyingly disconnects every 4 or 5 minutes or so? It then remains disconnected for about 20 seconds before reconnecting again? Batteries are good but at a loss ... worked fine for year!

    Can anyone please explain why my Apple wireless mouse keeps disconnecting from my imac? The batteries are good and the mouse in good clean order. Never had an issue previoulsy but now every 4 or 5 minutes the mouse diconnects and takes 20 seconds or so to connect again. Anyone else experienced this one?
    Thanks
    Jon.

    Some folk have reported a similar issue apparently caused by the batteries being a bit loose in their box. The suggested fix for that is to insert a thin piece of cardboard between the battery cover and the batteries.

  • Why is my USB mouse disconnecting and reconnecting?

    Our USB mouse has been disconnecting and reconnecting intermittently. There doesn't seem to be any rhyme or reason for it. We're using a Logitech Optical Mouse. It doesn't seem to matter which USB port it is plugged into. Occasionally when it becomes unconnected and doesn't reconnect, unplugging and plugging it back in will "fix" it. I've been using HardwareGrowler to keep track of this. This was occurring before we updated to 10.7. I may be imagining this but it does seem to occur more when it is running hot.
    Thanks

    I have yet to try a different USB mouse to see if it is the mouse itself. I did plug in my iPod and there seems to be no problem with connection there. The mouse will disconnect regardless of tempature and it seems to disconnect more during heavy usage (gaming).

Maybe you are looking for