USB Mouse not working in Leopard

I have a USB mini optical mouse by SEL which worked great in Tiger but isn't recognized at all by Leopard.

Hi,
The USB device issue can be always caused by driver or BIOS XHCI mode.
Besides above suggestions, you can also try to roll back the USB driver to an older version to see if we can get this issue fixed.
Please feel free to try it and let me know the result. If the reply is helpful, please remember to mark it as answer which can benefit our Community members.
Otherwise, please unpropose them and provide detailed information about current status.
We will wait for several days, if there is no response on this thread we consider that you got what you want or your issue has been resolved, then mark this case as answered. Thanks for your understanding.
Kate Li
TechNet Community Support

Similar Messages

USB Mouse not work with Mac OS 10.6

I have a USB mouse can work with Mac OS 10.4 but cannot with Mac OS 10.6. Noticed the different is the USB mouse motion reporting is 12-bit instead of 8-bit. It can definitely work on Windows with standard USB HID driver. I wonder if the OS 10.6 is having a different USB HID driver specification which is not posted in USB-IF.

Ask the Vendor.

USB mouse not working in Windows 8

I have Win8 64-bit OS. A couple of days back the USB mouse stopped working without any reason. The mouse works on other systems and there is nothing wrong with the hardware.
I found a couple of posts suggesting uninstalling the drivers or doing a system restore to get it to work again.
None of these work. I recently upgraded to Win 8.1 thinking that maybe the upgrade will help. It had no effect.
Can someone suggest any other known method ?

Hi,
The USB device issue can be always caused by driver or BIOS XHCI mode.
Besides above suggestions, you can also try to roll back the USB driver to an older version to see if we can get this issue fixed.
Please feel free to try it and let me know the result. If the reply is helpful, please remember to mark it as answer which can benefit our Community members.
Otherwise, please unpropose them and provide detailed information about current status.
We will wait for several days, if there is no response on this thread we consider that you got what you want or your issue has been resolved, then mark this case as answered. Thanks for your understanding.
Kate Li
TechNet Community Support

Trackpad USB Mouse not working in windows xp safe mode

I can't access my windows side, after fixing a series of problems with the windows recovery console. I can only access my windows login screen through safe mode. However, now my trackpad and USB(corded) mouse won't work, to login and finish fixing my windows xp pro side. The only advise I have been finding is to use a ps/2 connector for the mouse to work (don,t have one) or access the bios to enable the USB port (don't have bios). So I'm kind of stumped. Is there a way to enable a USB mouse to work in safe mode with windows recovery console or on the mac side or somehow enable the trackpad? Any help would be greatly appreciated!!!

bluerain37 wrote:
Ok, will get a USB mouse and keyboard, and try again.
I do have Kaspersky installed, but it's a very annoying spyware by Baidu (the search engine in China) where the registry keys just couldn't be deleted under the Normal mode ....
Ok then, no offence.
In any case, thanks for the advice!
Hope it helps and good luck
Stefan

HP Optical USB Mouse Not Working Win7

I have a HP USB Optical Scroll Mouse (265986-003 MOAFUO) which works on Linux + Mac, but wont work on my Windows 7 PC. I'm pretty sure I've used it before on previous installs of Win7. When I plug it in, it lights up and installs a logitech driver. I've tried the following:
Uninstalling the drivers - it installed the same one again.
Checked the HP driver site - no drivers.
I took the CMOS battery out too
Any ideas? It does work with other OS's so I'm sure this is something that can be fixed. Maybe a driver issue.
Thanks for reading.

I have exactly the same problem.
However, my dmesg info is slightly different:
usb 3-2: new low speed USB device using uhci_hcd and address 4
usb 3-2: configuration #1 chosen from 1 choice
input: HID 413c:3010 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input13
generic-usb 0003:413C:3010.0004: input,hidraw0: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:1d.1-2/input0
USB HID v1.00 Mouse is the difference, but it also does not work.
The problem occured after a recent upgrade, I suspect xorg-server.
Plugging the mouse into the computer results in these messages in /var/log/Xorg.0.log:
(II) config/hal: Adding input device HID 413c:3010
(**) HID 413c:3010: always reports core events
(**) HID 413c:3010: Device: "/dev/input/event10"
(II) HID 413c:3010: Found 3 mouse buttons
(II) HID 413c:3010: Found scroll wheel(s)
(II) HID 413c:3010: Found relative axes
(II) HID 413c:3010: Found x and y relative axes
(II) HID 413c:3010: Configuring as mouse
(**) HID 413c:3010: YAxisMapping: buttons 4 and 5
(**) HID 413c:3010: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 2
(II) XINPUT: Adding extended input device "HID 413c:3010" (type: MOUSE)
(**) HID 413c:3010: (accel) keeping acceleration scheme 1
(**) HID 413c:3010: (accel) acceleration profile 0
(II) HID 413c:3010: initialized for relative axes.
(II) config/hal: removing device HID 413c:3010
(II) HID 413c:3010: Close
(II) UnloadModule: "evdev"
Sequence:
* hal informs Xorg
* Xorg configures the mouse
* but hal removes the mouse ???

Windows 8.1 freeze on any hardware scan or changes. USB wireless keyboard mouse not working

Problem : System Freezes frequently on any hardware scan or changes.
Symptom : Wireless Keyboard Mouse not working.
Caused by : VMkbd.sys located in C:\Windows\System32\drivers.
Issue : VMware player or VMware Workstation installed on Windows 8.1 causes compatibility issue leading to system freeze
Soultion : Please follow steps below
Step 1: Start > run > regedit
Step 2: Locate to this registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e96b-e325-11ce-BFC1-08002BE10318}
Step 3: On the left side plane, Right click on the registry {4d36e96b-e325-11ce-BFC1-08002BE10318} and then export it as backup. Just to be safe.
Step 4: Edit the UpperFilters, The value current would be kdbclass vmkbd. Remove the vmkbd. So only value left would be kbdclass.
Step 5: Restart your system and connect your USB wireless reciever. If all is well it will not freeze your windows now.
This worked for me. Hope this works for you. Enjoy..!!

Hi AshishSrivastava,
Thank you for your sharing and update.
Besides, I will change this thread type as discussion.
Best regards
Michael Shao
TechNet Community Support

My Macbook Pro keyboard AND USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?

My Macbook Pro keyboard and USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?
This is quite frustrating, since it randomly occured as I was browsing the web. It seemed to happen out of nowhere. I cannot login to my user account because I cannot type my password.
Any help will be appreciated.
-Matt

If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
Next, download the 10.5.6 Combo update from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

Apple Mouse not working on Power Mac G4 MDD, works on other computers

I cannot get my standard Apple optical USB mouse to work properly with my Power Mac G4 (MDD). When I plug it in, the lights on the mouse work but the cursor does not respond. No movement, no clicking. However, when I plug the mouse into another one of my Macs, it works fine.
The Power Mac's System Profiler recognizes it as "USB Device," the mouse is unresponsive, and there are no mouse options in the System Prefs (keyboard & mouse). My Power Book's System Profiler recognizes it as "Apple Optical USB Mouse" and it works perfectly.
I am running 10.4.6 on both machines but I have had the problem with multiple versions from 10.3 up. I also bought another USB mouse (a Kensington) and had the same issues.
I've run through the standard USB troubleshooting like trying devices one-at-a-time and trying each USB port (on the Power Mac, the keyboard, and the back of a Cinema Display) as described in KB #300543 and KB #58033 but to no avail.
One thing that did stand out in #58033:
If the device shows up in System Profiler, even if the device doesn't work, the issue is usually due to software. Your best solution is to try updating the drivers, creating a new user, or reinstalling the system software.
Is there any way to update an Apple driver? I've only seen software for 3rd-party mouse drivers. I would try to create a new user but it doesn't seem to be possible using only keyboard shortcuts. And I would like to avoid reinstalling the system software!
Thanks for reading.
Power Mac G4 (MDD) Mac OS X (10.4.6)

Have you tried other mice on your computer?
I seem to recall a problem like this when Speakable Items is turned on. I'm also going to dig into a little research on this.
Try checking that out. Make sure it is off.
The other things to try are logging in as another user and see if the problem remains. If so, there is a bad preference in your user preferences.
Lastly, if all else fails, try downloading USB Overdrive and see if it takes over the mouse function and provides you with a usable mouse.
http://www.versiontracker.com/dyn/moreinfo/macosx/13443

Dual-Boot; Restart and boot other o/s USB devices not working

I have issue with my msi z97-g43 mobo and Windows dual o/s PC.
Booting with win-8.1, USB devices working very well.Restaring windows 8.1 have NOT any issue.
After shutdown & start PC, choosing to boot windows 7 on bootmanager, USB devices not working in Win-7.
System no hang or occur any error/BSOD message.All startup programs run as normal.
I tried to re-plug usb devices but notting happens... Still not working
But after the win-8.1 shutdown, if i switch off PSU power button, watting ~1 munute for discharge.
After power up PC and boot with windows 7 all usb devices works normaly.
I checked all internal connections. 2 times disassembly all hardware and re-built system, nothing changed.All windows updates and latest drivers installed.
I'm sure other H/W is OK, but I thnik this mobo have a fault.

Thank you for reply.My PC system specs:
CPU:    Intel Pentium G3258 3.2ghz
Board:    MSI Z97-G43 /Bios: Ver. V17.7
MEM:    G.Skill Ripjaws 2x4gb DDR3-1600mhz cl9 1.5v F3-12800CL9-4GBRL
VGA:    Sapphire AMD Redeon HD6670
CASE:    Zalman z3 plus white (5x 120mm fan)
PSU:    Thermaltake Litepower 500w (12v1+12v2=36amp)
HDD-1:    Seagate 1TB ST1000DM003 /HDD-2: Seagate 2TB ST2000DM001
COOLER:    Akasa 92mm PWM Blue Led
OC:    CPU:Default /MEM: X.M.P mode=1600mhz 9-9-9-24-2t 1.5v
O/S:    Win7 x64 PRO + Win8.1 x64 PRO (Genuine)
All hdd's have MBR based partition table.Windows 7 & 8.1 installed in non-efi mode.In BIOS Boot sequence is setting up to non-efi Boot(system) drive as primary.
Before I suspect maybe have a short circuit to pcb or similar thing cause this issue.I take out all parts outside the chassis, and ran this system on the antistatic bag and box.Nothing has been changed.
I have Cooler Master Devastator(MB24 + MS2k) USB keyb+mouse set and tplink wn722n usb wireless dongle.
I have one more pc,based on AMD 970+SB950 chipset mainboard and AMD CPU.I exchange all parts to this amd mainbaord and tested for faulted hardware.All intel system H/W's is ok.All works great
Dual boot works perfectly.Not needs to switch off psu/power back and run system again.
I think msi z97-g43 mainbıoard have a problem.

SA30 USB do not work after reinstall, please help!!

Hi, my SA30's USB do not work at all after reintalling, I do not have the original CD with the laptop as it is a gift from my mate.... I couldnt find the driver from the website, please could anyone help me???
I could use the USB mouse but when I plug the external hard disk in, it has no responses, I tried to search for new hardware, it couldnt detect it. Any information would be appreciate, cheers.

When you instll another OS than the recovery OEM OS you have to install the drivers and tools in a right order!
This order is on the Tools & Utilities CD in a html file! When you follow these order all hardware should be detect!
Also you can go to http://eu.computers.toshiba-europe.com and download the drivers
Bye Hans

Magic Mouse Not Working with Boot Camp.

Hi All,
I have a wired issue here. I installed Windows XP on my iMac 27" using bootcamp and all worked fine till one day my Magic Mouse stopped working in Windows. Now the funny part is windows is able to detect my mouse and says that the device is working normally but the green light under my mouse is OFF. No matter what i try i cannot get it to come on. But the moment i boot to Mac OS X the mouse works perfectly fine. My Apple Wireless KB works just fine in Windows. A USB mouse also works fine. I have also installed Parallels on my Mac and when i boot into the Windows partition using Parallels the Magic Mouse works fine. Any idea as to whats going on here.?
John.

I have a new (July 2009) iMac24 and neither the wireless mighty mouse nor keyboard work with Boot Camp XP Home Edition SP3. They install OK with the Bluetooth control panel, but then after five or ten seconds, drop out of the control panel and have to be discovered again. I spent two hours today with a Mac support expert, but no joy. We both gave up. It seems the wireless mouse/keyboard does not work with Boot Camp. If anyone hears of a solution, please let me know.

Apple wireless Mighty Mouse not working in Windows XP Pro/Boot Camp

I was able to get Windows XP Pro to install successfully on my new iMac, but I can only get a wired Microsoft USB mouse to work with it. When I boot to WinXP with just my wireless Mighty Mouse, the wireless mouse is completely unresponsive. Has anyone else experienced this, and is there a solution? Thanks!

Why not post in the Boot camp forum:
http://discussions.apple.com/category.jspa?categoryID=237

MSI GAMING 5 - ALL USB ports not working

hello
how are you every one
i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
Mouse and keyborad work in bios but if the system run don't work ! and trun off
and all usb devices
in safe mod work
rellay i don't know where is the problem !
CPU : Intel Core i5-4690K
M.B : MSI Z97 GAMING 5
RAM : G.Skill Ripjaws X 8GB DDR3 Kit
GPU : Gigabyte GeForce GTX 970 G1 GAMING
SSD:Corsair force LX 256 GB
HARD: Seagate Barracuda 1 T.B 7200 RPM
CPU COOLER : Cooler Master Hyper 212 Evo
PSU : Cooler Master GM-Series 750 watt
CASE : NZXT Phantom 410
Thank you

Quote from: Nichrome on 28-January-15, 00:18:47
Hi,
What about if you try to install drivers from your product's page?
http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
thank you
i just remove USB3 controller driver and work
thank you all :D

New T400 - Mini Dock USB Ports not working after hot dock

Hello,
just got a new T400 at work. I know this issue was common with the R60...however I figured this would be resolved with the T400. After PROPERLY undocking my T400 (Start -> undock -> wait for notification and green light)..... I go off to my meetings, etc and all is well with the world. When re-dock the machine, the USB keyboard and Mouse (and sometimes the monitor) will not re-engage. Sometimes I get the monitor...and no keyboard and mouse.
Any ideas on this? Kind of frustrating because I usually have to re-boot (or unplug the mouse/keyboard/ monitor from the dock and plug them directly into the laptop...which defeats the purpose of the dock).
Appreciate the help!
Robert

i have the same problem with a R60 and advanced minidock (winXP SP3). it worked for three years now, but since about one month, when returning to dock, my USB mouse only works in about one of five cases. monitor-usb same problem. keyboard is an old PS/2, this always works. i need to plug the mouse directly to the R60, then it is recognised and works as expected. i do driver updates quite regular, so maybe one of the last drivers have a bug?

Ultraslim wireless keyboard and mouse not working

Hi , I purchased the Lenovo Ultraslim Wireless Keyboard & Mouse (pn: 57Y4700) about 4 months ago for use with my T60 laptop (which i use with a docking station and large lenovo monitor at work).
Everything was woking fine until last Monday when I can into work after the weekend and neither the mouse or keyboard worked. I replaced the batteries in both, rebooted the machine several time, switch the USB ports for the nano receiver, but nothing seems to have worked.
I looked online for troubleshooting options, but did not find anything.
The mouse and keyboard don't seem to have a "sych" button - if I recall correctly everything worked right out of the box.
My theory is that the nano reciever was damaged (not sure how) -- but don't know how to proceed:
can the nano reciever be replaced;
any other options to troubleshoot;
any chance that this could be a software problem
Thanks

Hi coffee12345,
Welcome to the HP Forums!
I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
What is the Product and Model Number of your desktop?
What version of Windows are you using?
Is this a recent issue, or has it been like this since day one?
Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
Please re-post with the necessary information, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

USB Mouse not working in Leopard

Similar Messages

Maybe you are looking for