USB mouse will not initialise on boot-up when used via Dynadock on Satellite Pro U200

The USB mouse will not initialize on boot-up when used via Dynadock on Satellite Pro U200. If the mouse is reseated on the Dynadock it works fine. I am using a Kensington Valuoptical USB mouse. I have tried alternative kensington mouse and had the same problem. Can anyone advise how to resolve this issue?

Hi Jeremy
Unfortunately I have no solution for your issue but it can also be some technical limitation. I am also interesting to buy such docking station and I would like to know if there is the same problem with external HDD or USB memory sticks.

Similar Messages

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

My Trackpad or USB mouse will not work

Hey,
I'm running a power book G4 on version 10.3.11.
I started to notice erratic behavior with my track pad. It wasn't clicking on anything I was trying to select. Then all of a sudden it completely went. I can move the curser around the page fine but when I try and click on something nothing happens. It's like I am not clicking on the track pad at all.
I'm pretty sure it's not the track pad as the exact same behavior happens when I use a USB mouse.
I've also run a Hardware test and nothing has come back as being faulty.
Can anyone tell me what this could be? Maybe I need to update my operating system? Or there is something wrong with the board that actually reads the ram in my power book?

http://discussions.apple.com/thread.jspa?messageID=8669772&#8669772
This issue came up for me over the weekend on December 20th.
Tried reset of trackpad with palm. - No improvement.
PMU reset - No improvement.
PRAM reset - No improvement.
Disassembly and cleaning - No improvement.
USB mouse and trackpad have same symptoms:
erratic jumpy mouse cursor and clicks not registering correctly.
Used Diskwarrior to repair "keys out of order" problem. - No improvement.
Noticed desktop wallpaper switching rapidly.
Took PB to Apple Store - Genius booted to his portable HD and problem not evident. Concluded software problem, not hardware. Tried to delete mouse prefs but couldn't find them.
Genius recommended "archive and install."
SOLUTION
"Archive and Install" from Tiger update disk. - Problem fixed.
Ran software update - used combined OSX update. - Problem still fixed.
Looks like my problem was a software glitch. Kudos to the Genius for good advice.

Form will not open with adobe reader when using chrome and mozilla

The form opens fine in internet explorer, but when opened with chrome and mozilla it says that parts of the document could not be displayed and the 'submit form' and 'print' functions do not work? how do I get it so that the forms open with adobe reader as a pdf automatically instead of opening in another search engine tab?
Thanks

Hi
Chrome and Firefox use their default PDF viewers instead of Adobe Acrobat / Reader and hence most PDFs will not be fully functional in those.
For that you just need to change the settings :-
http://helpx.adobe.com/livecycle/kb/xfa-forms-firefox-chrome.html
Thanks and Regards
Rahul JOshi

Firefox 30 will not launch the ICA Application when using Citrix receiver 4

When trying to launch a Citrix Application with Firefox version 30 it will not launch.
There is no error message appears.
If, you change back to Firefox 29 all works without issues.
How can you get the new version to work Citrix Applciations and Citrix receiver 4.1

The fix for me was to update to the latest version of Citrix Receiver (4.1.0.56461) and then change the plugin settings for Citrix in the about:addons sections from "ask to activate" to "always activate". All working again for me now :)

My videos will not run on firefox but when using Explorer everything runs fine. Why would this happen. Is there a fix or setting wrong when I use your service.

I am not sure what other details are needed. Please let me know what specifics you might need.

In order to be able to find the correct solution to your problem, we require some more non-personal information from you. Please do the following:
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
Thanks in advance for your help!

My Macbook Pro keyboard AND USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?

My Macbook Pro keyboard and USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?
This is quite frustrating, since it randomly occured as I was browsing the web. It seemed to happen out of nowhere. I cannot login to my user account because I cannot type my password.
Any help will be appreciated.
-Matt

If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
Next, download the 10.5.6 Combo update from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

NF750-G55 - Does not detect usb mouse (have to plugin after boot into Windows)

Topic says it all...
Mouse is Microsoft Habu, has been working in my old system just fine (ASUS M2N32-SLI DELUXE). The only usb items plugged in are the mouse and my Logitech G11 Keyboard.
I just upgraded my old rig to what you see in my signature, my mouse will not get detected unless I replug it in after windows has started.
During boot after initializing usb controller it says Found: 1 Keyboard and 1 Hub
I have tried the following but with no successful results:
PS2 Keyboard with mouse (mouse behaves the save)
Mouse w/usb->ps2 adapter (mouse lights up but doesn't do anything in windows)
Mouse plugged into every different port on the MOBO, D-Bracket, front panel usb or even into keyboard
Different mouse (boot says Found: 1 Keyboard, 1 Mouse, 1 Hub) and this mouse works all the time
USB Legacy On/Off inside bios
I also have a USB powered hard drive (http://www.simpletech.com/products/storage/simpledrive-mini/red-wine-250gb.php) that when plugged into the motherboard was making a beeping sound but I can't find any information on what that means (if anything)
Any ideas?

Quote
I just upgraded my old rig to what you see in my signature, my mouse will not get detected unless I replug it in after windows has started.
I had a similar problem with a couple of different boards, but with a Razer Copperhead mouse. I ended up just buying a new mouse (PS/2 type).

USB mouse does not work

hi All
I bought a new HP laptop few days ago,when I installed Win7 pro on it after a few minutes, the usb mouse stopped working. Its light still lights up ,but the cursor does not react. The drivers of the device are installed and working properly. the mouse will
not work until I click "scan for hardware changes"in Device Management . but when I restart the computer, it happend again . but win7 home edition seems does not have this problem. please help. thanks

Hi,
I suggest updating the latest BIOS and chipset from HP site, then reinstalling USB controllers to check the result. If any USB hub is used, please bypass it.
http://blogs.technet.com/b/asiasupp/archive/2010/11/23/error-message-one-of-the-usb-device-attached-to-this-computer-has-malfunctioned-and-windows-does-not-recognise-it.aspx
Also, please perform
clean boot, disable your antivirus and firewall
temporarily to avoid any blocking. If the issue persists in clean boot, test the issue in Safe Mode and Device Clean boot.
Device Clean Boot
1. Go to Device Manager
2. Expand "Sound, video and game controllers".
3. Right Click on Audio device and choose disable.
4. Please use the same method to disable other dubious hardware such as: internal modem, and CD-R drive. Please note some devices such as video adapter are not available
to be disabled.
5. After that, restart the computer and then test the issue. If it does not occur, you can enable the device one by one to narrow down this issue.
After you found the device that causing the problem, you can resolve by installing last driver or replacing the device.
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

My mouse will not open any files or folders

My mouse will not open any files or folders. I've had to do a hard reboot but nothing changes. The mouse will scroll across the screen but it will not left or right click on anything on my desktop

Hmmm, does the right button also not work?
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Bluetooth keyboard and mouse will not connect

I loaded a linux iso on a usb. Loaded it on a reboot. It may have been corrupted or something, because it did not load correctly. I rebooted the computer again and now the bluetooth keyboard and mouse will not connect. How can I fix this?
Thank you.
Ryan

Hello:
These are knowledge base articles:
Reset PRAM:
http://support.apple.com/kb/PH4405
Reset SMC:
http://support.apple.com/kb/HT3964
Those may or may not help, but they will not hurt anything.
Barry

My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?

My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?

I'd start by looking in system profiler.
the blue Apple icon > About this Mac > More info...
goto the hardware section. Scroll down and click on USB
See what happens when you have the device plugged in & not plugged in.
Move keyboard & mouse around to verify that ports work. Plug device in a port that worked with keyboar or mouse. Keyboard usb ports are rather low power.
Perhaps device is taking too much power. Are devices power or unpowered? Try connecting devices to a usb hub.
Which mac do you have?
What iMac do you have?
Report system info
Blue apple > about this Mac
click on more info
click on hardware
do not copy your serial number

Mouse will not drag songs

my mouse will not drag songs on the Itunes library to plays lists. also when i use garageband, stuff will not drag in there as well as in i photo but other files and icons will drag out side those programs.

Sorry, I have run through these suggestions but they have not worked either. As the previous post suggested, I have downloaded and reinstalled the OS 10.2.8 combo upgrade but this has made no change. (Although I didn't actually erase the existing drive) I have a 'normal' 1 button Apple USB mouse which doesn't require software. That of course is the great thing about our great computers just plug it in and you know it will work!. Perhaps there is a small driver file hidden somewhere which I have inadvertently erased? Don't know how this might have occurred. Can't see anything on the Apple site for this type of problem. Are there drivers for normal mice.
Keith

My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs or so, then the machine shuts down and restarts.

My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs, then the machine shuts down and restarts. This sequence will repeat seemingly forever unless I shut it down manually.
I upgraded to Yosemite from Mountain Lion a couple months ago, skipping Maverick completely, and I've done any associated updates that Apple told me about. I don't recall which version of Yosemite I have, but I'm sure it is the "latest and greatest".
I've tried re-starting in Safe Mode / Safe Boot and that does the same thing as described above except without the endless restarts. Instead of restarting at some point, SafeBoot proceeds to the white screen and then it hangs until I restart it manually. (I've waited as long os 20-30 minutes with no response).
When I tried the option-command-p-r key combo I never get any chimes or other noises besides the original 1 time boot sound that you would expect to get when starting up a macbook pro.
I was using the mac quite normally (meaning I was doing work I normally do on it and there was no indication of anything wrong) immediately prior to this happening.
The machine is BootCamp(ed) with Windows 8.1 which I use from a VMWare virtual machine instead of natively so that I can have both OSes running at the same time. I also think this is unrelated to my problem. I have been using this setup for more than 2 years.
My upgrade to Yosemite was uneventful and I thought it went well and was very smooth. I don't want to lead attention away from Yosemite, but at this point my problem does not seem related to the upgrade.
Any help is appreciated.

Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?

Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694

USB mouse will not initialise on boot-up when used via Dynadock on Satellite Pro U200

Similar Messages

Maybe you are looking for