USB not installing under WinXP Pro

I have a MS-6380E RAID board, and after reinstalling
WinXP Pro, the USB ports do not recognize the mouse, printer, etc. I have removed them, and attempted to update drivers using the CD, and downloads from MSI downloads, but windows tells me the drivers are for win95.

Get from here : http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php
Your board is KT3 Ultra2 or KT3 Ultra ? Ultra goes for NEC, Ultra2 goes for VIA USB.

Similar Messages

Just got iPhone 5, get home and find iCloud Outlook Add-in does not install under Windows XP. I am loathe to upgrade to Windows Vista/7/8 just yet. Can I obtain and use an earlier version of iCloud Outlook Add-in? My iPad II synchronizes!

Just got iPhone 5, get home and find iCloud Outlook Add-in does not install under Windows XP. I am loathe to upgrade to Windows Vista/7/8 just yet. Can I obtain and use an earlier version of iCloud Outlook Add-in? My iPad II synchronizes!

There is no 'earlier' version that supports XP. iCloud launched with Vista/7 support only.

I can not install windows 8 pro on my mac , the disc don't allowed be partition

I can not install windows 8 pro because of the hard-disc dont allowed to partition , I used the bootcamp but always the fault pop coming up .

Hi there soranfromorebro,
I would recommend taking a look at the article below.
Boot Camp: "We couldn't create a new partition or locate an existing one" alert during Windows 8 install
http://support.apple.com/kb/ts4560
-Griff W.

HT5022 Airport Utility 5.6 will not install under Mountain Lion

I have older Base Station Extreme and Airport Express models that need to be looked after; however, the fix to install Airport Utility 5.6 under Lion will not work under Mountain Lion. The installer complains that "the version of Mac OS X on this volume is not supported". So...suggestions?

That is correct. AirPort Utility 5.6 for OS X Lion will NOT install under OS X Mountain Lion. If you had it already installed, and then upgraded, it would have worked just fine.
One option, is to use Pacifist to extract the utility directly from the .dmg file.

Frame 7.2 will not install under Windows 7 Ultimate

HELP: FrameMake2 7.2 does not install under Windows 7. Almost at the end of the install it crashes with an empty dialogbox and a warning. Nothing else.
Any one seen this,
Keep smiling
Thomas

For more info on running things in compatibility mode, these links should help:
http://windows.microsoft.com/en-us/windows-vista/Make-older-programs-run-in-this-version-o f-Windows
http://www.sevenforums.com/tutorials/316-compatibility-mode.html
There's also a free "XP" add-on that runs apps in a virtual mode with Win7. See:
http://www.microsoft.com/windows/virtual-pc/download.aspx
There's also another freebie virtual-machine that will allow you to run most older apps available at:
http://www.virtualbox.org/

8i client install in WinXP Pro

I'm trying to connect to an 8i database via VPN. I have no Oracle software installed on my WinXP Pro workstation. I downloaded the 8.1.7 client and saved it on a CD. When logged in as administrator I insert the CD the autorun window pops up and I select Install/Deinstall Products. The CD spins, the hard disk thrashes, but nothing happens.
What am I doing wrong?

Yes, I have been having the same problem on Win2k with Pentium 4 processor, which appears to be the issue.
Here's the workaround:
Windows XP Pro or Windows 2000 with Pentium 4 only
� Copy all the files/folders from the oracle 8i CD on to a folder on your c: drive. Do NOT name this folder Oracle.
� Change the name of the symcjit.dll file.
For Windows XP: Change from symcjit.dll to symcjit_disc.dll
For Windows 2000: Change the symcjit.dll to symcjit.dll.ori
The path to this file is:
C:\stage\components\oracle.swd.jre\1.1.7.30\1\Data Files\Expanded\jre\win32\bin
� Now go back to your main c: drive directory and run the setup file.
Alternatively the 1507768 will do the trick.

MPEG 2 component not installed in Quicktime Pro

My first symptom is: I try to extract a file from a DVD using MPEG Streamclip, and I get a message that says MPEG 2 is not installed in my computer.
But I have Quicktime Pro, Final Cut Pro and Compressor installed in my computer. I have checked the Quicktime folder in the library and the component is there. But when I try to export a file as a MPEG 2 movie either from inside Final Cut using the Quicktime Conversion option or from Quicktime itself, I do not see the MPEG 2 option! Why is this???
Help please!
PS: My DVDs are not protected, they are of my own work!

What I really wanted to do was: import my own videos from DVDs I made, add them to a DVD Sudio Pro project of my work (my digital portfolio) and then burn this project back to DVD - encoding them back to DVD. It was my understanding that in order to work with them in DVD SP, they had to be either .mov or mpeg2.
DVDSP normally expects a conversion compatible QT compression format or MPEG-2 "elementary stream" (i.e. M2V video file referencing a separate AIFF audio file or paired M2V and AC3) files.
Any idea how to fix this?
You may have run up against an upgrade incompatibility. I used to use FCP v4.5 with the then contemporary versions of Compressor and DVDSP. As soon as i upgraded to leopard, my MPEG-2 encoder, Compressor, and DVDSP either failed to work at all or only partially functioned. As I always keep an earlier OS handy on one or more hard drives, I quickly learned these applications still worked when I booted up using Tiger. For several months I continued to work by reverting to Tiger when needing to use the affected applications. In April, I finally "bit the bullet" and purchased a used copy of FCS2 over the Internet. Now everything (except my old MPEG-2 encoder component) works under Leopard. Not sure if this may be the basis for your problems but if you can boot up in Tiger and re-initialize the problem applications, then you can easily test whether or not an OS incompatibility is the root of your problems here.

"Digital Still Camera" not installing in XP Pro (IPhone 4 Os 4.2)

Help, all posts seem to be getting ignored in Apple regarding XP Pro.

michaelpark wrote:
Thanks. When I attach the IPhone 4 to my desktop, XP Pro lower right hand corner pops up "Found IPhone" and then "Found Digital Still Camera", after that a Found New Hardware wizard opens and I'm not able to move past as none of the options work including things on Apple website with the driver, etc., then lower right corner, "not installed and may not work correctly". It does charge and works with ITunes. In a Windows 7 laptop, no problem, a window opens and asks about importing pictures, etc. and it all works.
If I understand correctly, it shows up as a digital camera but does not show up in iTunes. You get an error message installing the driver, which may be only a warning; it might work anyway. I assume you have iTunes 10.1 installed and that your account has Administrator privileges.
Open the Task Manager first; click on the Processes tab, then the Image Name column heading to sort it. Look for AppleMobileDeviceService.exe. If you do not see it you have found the problem. Launch the Service Manager (in Control Panel, Administrative Tools), find the service, right click it and choose Start. This should fix the problem.
If the service was running or you get an error starting it you need to completely remove iTunes, download a fresh copy, and reinstall it. See: http://support.apple.com/kb/HT1925
Other possible causes include using a hub rather than a direct connection to a USB port on the computer, a firewall or antivirus that is blocking the connection, or a defective USB port.

PM8M2-V RAID array not recognised by WinXP Pro

Greetings,
i'm just setting up a PM8M2-V system with 2 x WD 80GB JD SATA drives. In the RAID BIOS i have configured the drives to be RAID 0 (striped) for performance and made them bootable. From a IDE DVD rom, i'm running a WinXP Pro (corp ed - no pre-installed service packs) install but the OS will not detect any drives in the system.
I have downloaded the VIA_RAID_OM74.zip file from MSI VIA PIDE-SATA RAID Drivers and Utility for creating the RAID drivers and tried to create a floppy disk with the WinXP drivers on it using the embedded (and slightly cryptic) VIA MakeDisk.txt instructions.
Containined on the floppy disk are the following files/folders:
a:\TXTSETUP.OEM
a:\PIDE\WinXP\viapdisk.cat
a:\PIDE\WinXP\viapdisk.sys
a:\PIDE\WinXP\viapide.inf
a:\RAID\WinXP\viamraid.cat
a:\RAID\WinXP\viamraid.inf
a:\RAID\WinXP\viamraid.sys
*plus the other MS operating system files in the similar directory structure*
Problem - WinXP Pro does not recognise this created floppy disk as a hardware support disk and will NOT let the OS recognise the SATA RAID array as a drive.
Complete system specs
MSI PM8M2-V VIA P4800 + 8237R (RAID)
Intel P3 3ghz HT LGA775 CPU
2 x 512 DDR-RAM PC3200
2 x WD 80GB JD SATA drives configured in a RAID 0 Striped set and bootable
1 x IDE DVD D/L Burner (Master drive on IDE Secondary Channel)
ATI Radeon 9250 128m AGP Card
Web Excel 56K software modem

Did you boot with WinXP CD 1st and then hit F6 to install the RAID controller drivers?

Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please

I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.

Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS.

Photoshop 6 & 7 does not install under Windows 7 Home Premium

I recently updated from Vista Home Premium SP2 to Windows 7 Home Premium.
Now I need to re-install my Adobe Photoshop 6 to be able to upgrade to Photoshop 7.
When I try to run the Adobe setup.exe as administrator, setup starts, the cpu load goes up but
then the setup disappears without error message.
I tried all the different compatibility modes (Win95, 98, 2000, xp, Vista) - no success.
Can anybody help please?
Helmut / Cologne, GermanyHelmut
Cologne/Germany

Hi Bineesh,
just to avoid confusion: I'm not talking about Adobe Photoshop "Elements", the product is Adope Photoshop 6 & 7, both
predessors of Adobe Photoshop CS.
Both Photoshop 6 & 7 were running with Vista SP1, which was the pre-installed OS on my Laptop, and I had installed
both Photoshop versions under Vista with no problem.
Before trying to install Win7 Home Premium, I ran a full data backup, then I tried Windows Easy Transfer to save my
data on external disk.
When I tried to install Win7 using the upgrade option, this failed. So I did a complete fresh new installation of Windows 7
and used Win Easy Transfer to import my data. This, however, did not work properly.
I therefor formatted the disk and did a complete new Win7 install, afterwards I did a data revovery to import my data.
Photoshop 6 runs under Win7, however PS7 does not, giving the message "No personalization data found- reinstrall".
I cannot reinstall, because the PS7 is an upgrade from PS6, and when I try to reinstall, it says that no product is found.
I therefor tried to reinstall PS6 as well, which does not work under Win7.
When I check the event log after failed installation, this is what it says:
Fehlerbucket , Typ 0
Ereignisname: PCA2
Antwort: Nicht verfügbar
CAB-Datei-ID: 0
Problemsignatur:
P1: Setup.exe
P2: 5.50.137.0
P3: 32-bit Setup Launcher
P4: InstallShield®
P5: InstallShield Software Corporation
P6: 200
P7: -1
P8:
P9:
P10:
Angefügte Dateien:
C:\Users\HZ\AppData\Local\Temp\{9b8d2eae-96ff-497e-a63d-7a6052a72c24}\appcompat.txt
C:\Users\HZ\AppData\Local\Temp\TabB6CA.tmp
Diese Dateien befinden sich möglicherweise hier:
C:\Users\HZ\AppData\Local\Microsoft\Windows\WER\ReportQueue\NonCritical_Setup.exe_203a36bb9757e110637ae97a12daa0ab69470df_cab_0700c4fd
Analysesymbol:
Es wird erneut nach einer Lösung gesucht: 0
Berichts-ID: be5a264a-cfc3-11de-8d04-0800270018af
Berichtstatus: 4
I'm disappointed because both programs were working under Vista and I use them a lot...
Cheers,
Helmut (Cologne / Germany)Helmut
Cologne/Germany

Hp scan not installed (HP Laserjet Pro 200 Color MFP)

Hi all,
My "HP Scan" desktop icon stopped working.
HP "Pring & Scan Doctor" could find the software on my laptop.
As the next step I uninstalled the software (Scanner software).
At HP Smart Install I reinstalled the printer.
Owever, the installation didn't install the scanner applicaktion.
How should I proceed to get the scanning app back?
The printer is working fine when it comes to printing.
I use a wireless connection to my printer.
Grateful for any good tips!
This question was solved.
View Solution.

Hi @TobySweden ,
I see that you are having issues with the scanning application not installing over the wireless network. I would like to help you resolve this issue, but I will need some more information to provide the proper steps.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
There are a few Laserjet 200 series models.
In the mean time, I would uninstall the printer software, download the latest drivers and software for Windows 8.1 and install it this way without the Smart Install.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Why can I not install Acrobat XI Pro on a Windows 8.1/64 machine?

Acrobat X Pro is running, but when I try to install Acrobat XI Pro through Adobe Creative Cloud on a Windows 8.1/64 machine it fails near the end of the installation. It indicates that it failed with 7 errors, but nowhere are the errors accessible. Can anyone help?

Were you logged in as the administrator and did you have anti-virus disabled? CC may have some special installation requirements and you need to check the CC forum for such information.

YOU SHOULD BE ASHAMED OF YOURSELVES - FLASH WILL NOT INSTALL UNDER ANY CIRCUMSTANCES

Does anyone from Adobe support read this forum??? Adobe Flash will NOT install on a Mac. It hangs at either 95% or 97% depending on which download link is followed. IT WILL NOT FINISH THE INSTALL. I have uninstalled and tried SIX installs - back to back - and it stalls. IT WILL NOT COMPLETE THE INSTALL. You have been aware of this problem for months and have not fixed the installer. I BOUGHT A MAC, NOT ADOBE FLASH, but I am forced to use it. SO FIX IT!!!!!!

Does anyone from Adobe support read this forum??? Adobe Flash will NOT install on a Mac. It hangs at either 95% or 97% depending on which download link is followed. IT WILL NOT FINISH THE INSTALL. I have uninstalled and tried SIX installs - back to back - and it stalls. IT WILL NOT COMPLETE THE INSTALL. You have been aware of this problem for months and have not fixed the installer. I BOUGHT A MAC, NOT ADOBE FLASH, but I am forced to use it. SO FIX IT!!!!!!

MacBook Pro 15" (Late 2013, 11.3) will not install Windows 7SP1 Pro

Hi All,
I have had many go's at this, but I am unable to install Windows 7 bootcamp on my late 2013 15" retina macbook pro.
First I'll head off with the specs:
Model Name: MacBook Pro
Model Identifier: MacBookPro11,3
Processor Name: Intel Core i7
Processor Speed: 2,3 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: MBP112.0138.B02
SMC Version (system): 2.19f3
NVIDIA GeForce GT 750M (and the Intel of course)
512GB SSD
16GB USB3 thumbdrive
Windows 7SP1-U
Windows 8.1
First try:
Run bootcamp assistant (Version 5.1.2 (484))
Let it run and run, changed the partition to 101GB, eventually at the installer screen it asks for drivers. Dunno which, but keyboard and mouse fully functional
Second Try:
Run bootcamp assistant (Version 5.1.2 (484))
Update drivers from BootCamp5.1.5621
Same issue... no drivers for, I don't know which driver
Third Try:
Run bootcamp assistant (Version 5.1.2 (484))
Update drivers from BootCamp5.1.5621
boot with alt and boot into osx
remove the partition made by assistant and redo that by making a exFAT
reboot and start windows installer from USB
Same issue... no drivers for, I don't know which driver
Fourth try:
Same as third, but with a USB2 thumbdrive
fail...
Fifth try:
Run bootcamp assistant (Version 5.1.2 (484))
Copied Intel(R)_USB_3.0_eXtensible_Host_Controller_Driver (read it somewhere but cant find the page anymore, downloaded from the Intel site)
Reboot, no KB/mouse so that failed
Sixth Try:
Run bootcamp assistant (Version 5.1.2 (484)) but with a Windows 8.1 ISO
Update drivers from BootCamp5.1.5621
Finally I had the opportunity to install Windows, but... v8. (and I want 7)
Let the install continue, but exited after 1 hour staring at "almost finished"
Seventh try:
Run bootcamp assistant (Version 5.1.2 (484)) but with a Windows 8.1 ISO
Update drivers from BootCamp5.1.5621
boot with alt and boot into osx
remove the partition made by assistant and redo that by making a exFAT
reboot and start windows installer from USB
Let the install continue, but exited after 45 minutes staring at "almost finished" (less patient this time)
Eight try:
Same as try #2, hoping to get lucky....?
Unfortunately I can't come up with options. So any suggestions are welcome!
Maybe Win7 will never install on this
Maybe I need a different Windows 8 ISO
Can't go back to OSX 10.8 as it's not supported on this Macbook.
Ow... and why do I want Windows? Need to test several pieces of software which don't run on Mac
(also wanna play the Windows games with Steam in freetime)
Thanks!!!!

vadik.l wrote:
Yes, as I already mentioned above:
Also I'm using TimeMachine + external HDD (do backups once in 2 weeks).
Sorry I missed that.
This is what I think is happening:
http://support.apple.com/kb/HT4878
There are two options, keep the Time Machine HDD connected full time or turn Time Machine off and on only when you want to make the backup.
Ciao.

USB not installing under WinXP Pro

Similar Messages

Maybe you are looking for