USB Not Recognized, done everything ive seen so far

Ok, I purchased my video ipod a a day ago. I installed everthing and put the songs on my ipod and everything was fine. The next day(today) i tried adding videos(learned it was all about converting and what not) and i successfully added one video. After that when I connected the iPod to the computer again, it said "USB Device Not Recognized...."
This is when I came to support, I tried doing everything I saw in the discussions, reseting while connected, checking USB, ini file. I didnt seen anyone actually solve their problem either in their topics created. Is there any solution?

http://www.info.apple.com/kbnum/n93405

Similar Messages

  • My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have  any drivers
    its driving me round the bend at the minute

  • IPhone is not appearing in iTunes 12, USB not recognized by Windows 8.1

    S.O.S
    My iPhone 5s is not appearing in iTunes 12.
    Windows 8.1 says "USB Not Recognized".
    iPhone not appearing in iTunes 12 on iMac and MacBook Pro as well
    iPhone can charge with no problem.
    Try different cables and same problem nothing changed.
    I had tried;
    Reset and Restart iPhone.
    Cleaned the charging input.
    Tried in 3 different computers.
    I can't perform the method like uninstall/reinstall the USB driver on my Windows because in my Windows the USB showed unrecognized instead of "Apple USB/iPhone USB" on Device Manager.
    P L E A S E    A D V I S E

    Hi Since ios 7 almost everything can be dropped over your WiFi When you charge your phone if Automatically backs up to iCloud If you have problems backup to iCloud over your WiFi Then Restore iPhone back to Factory Settings Use same Apple ID Then you will get all your apps & data back. We have 2 iPhones & 3ipads & have not used a pc for over a year with them. Cheers Brian

  • Have reinstalled ITunes correctly-after USB not recognized for new Shuffle

    New Shuffle- 1st time it says USB not recognized- Apple sends me info to uninstall and re-install I-Tunes- I-Phone is still seen- try Shuffle- first message says USB port recognized- next one says something about hardware not being installed properly. Try again and am back to the original problem- USB not recognized. Of course Apple Support is now closed- any ideas?

    DId you uninstall iTunes and all it's components? Or just the iTunes program?  Apple Mobile Device would be the main cause more than likely. So it is important whether you uninstalled all the programs or just iTunes. If so what I would try next is putting the device into recovery mode and seeing if it detects it like that.

  • HT1923 USB not recognized! HELP URGENT

    Heyy Everyone!
    I really need help!! Okay so this is the case I connected my iPod touch to the laptop Sony Vaio, and this is the first time it ever happened it says USB not recognized, doesnt open itunes or anything, yes I searched and searched did everything nothing worked please if you know how to fix this.. I tried it on couple more laptops/computers still the same any idea what could caused the problem, i used it like couple of times and left it for a month-ish oh and its 22,321,272 minutes locked and I really want to restore but really cant desprately need help

    ok, Im sorry to update this thread again but I fixed one issue and made another...
    So on another thread I read that sometimes the issue is fixed from shutting down the computer and actually unplugging it from the wall. I did that and at restart it worked! It prompted me to restore my settings and it went through and works fine now. HOWEVER... my apps are gone! I did a backup on itunes today that it loaded, but the apps are not there.... what happened?? Please tell me they are not lost.....

  • My iTouch says USB Not Recognized?

    I plug my 2gen iPod Touch into my comptuer and almost immediatly it says USB Not Recognized. But, when I plug it in with the newest cords it shows up just fine. Is my cord out of date? Is the one with the button release. I don't see how a cord would affect it showing up on the computer.. But it does. HELP!

    I had success with the holding down the keys and connecting to usb and using itunes to restore firmware like they show here
    http://support.apple.com/kb/HT1808
    the showing the usb thingy on the screen part

  • My ipod 5g usb not recognized

    I cant access my ipod files through itunes & windows explore it said "usb not recognized"
    I already did all this step http://support.apple.com/kb/ts1538 , but didnt work
    I also try to delete unknown device from USB Controller and reinstall the driver , its also not worked
    I try Plug in on DFU & Recovery mode , it also useless
    Im on windows 7 ultimate 64bit

    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or       
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • When i plug in my mini, i get "USB not recognized"

    As i said in the title, when i plug this in i get the USB not recognized. I know its gotta be a problem with the ipod, as i plug in my own, it works fine, but when i plug in this one with the problem, it gets this message. Does anyone have any idea on what to do?? I could use some help. Thanks.

    Ive rebooted it and reset it, and i can not reformat it because the computer doesnt recognize it. any other ideas?

  • Can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized itried all the tips like reboot and restore plshelp me thanks

    can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized its freeze iin display usb and itunes logo pls help me pls itried all the uninstall unknown device and reboot the ipod and restore pls help me thanks

    Try the suggestions found here: http://www.apple.com/support/ipodtouch/assistant/itunes/

  • External USB not recognized on my iMac (intel) in Disk Utility, Finder as well as in Terminal diskutil list but is listed in System Profile, which includes the location ID of 0xfa400000 / 5.  Can the location ID be used to restore USB identity ?

    My 1TB Seagate external USB not recognized by my iMac (intel) in Disk Utility, nor in Finder as well as in Terminal "diskutil list" but it is listed within the System Profile, which includes the location ID of 0xfa400000 / 5.  Can the location ID be used to restore the identity of my external USB ?

    Hello JNotorious,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/ht1151
    Have a nice day,
    Mario

  • USB not recognized from my ipod touch 2nd gen on any of computers.

    USB not recognized from my ipod touch 2nd gen on any of computers.

    Just what are you doing where?
    Are you trying to sign into Settings>iTunes and App Store?

  • My Ipod Touch when I try to connect to ANY computer with ANY USB cable I get "USB Not Recognized" Other Ipod devices work with ALL computers and ALL USB cables PLEASE HELP!!!

    I am using an IPod Touch 3. I get the error message USB Not Recognized. Now I have tried three different USB Cables and three different computers...... Same error message. My daughters IPod Touch 4 works perfectly with all of those USB Cables and computers, so this is not a USB problem or a computer problem. It must be something with my IPod Touch 3. Every article I go to wants me to look at stuff on the computer but how could that make sense if other IPod Devices work fine? Please. Any information would be greatly appreciated.

    You need to provide more information about your network. What frequency does it use (2.4ghz or 5.0ghz), which wireless protocol (a, b, g, b/g compatibility, n), and what security are you using (WEP, WPA2, etc.)?
    Please also provide more information about your iPod Touch. Which model is it, and which version of the iOS are you running on it?

  • I have got an iphone 4 and i have plugged it into my windows 8 laptop and a message pops up on the laptop saying usb not recognized, what do i have to do to make my laptop recognize my phone?

    i have got an iphone 4 and i have plugged it into my windows 8 laptop using the usb cable, and a message pops up on the laptop saying usb not recognized, the iphone doesnt say its charging or anything, how do i get my laptop to recognize my phone?

    Start here:
    http://support.apple.com/kb/TS1538

  • Zen Micro Freezes when I plug in USB cable+USB not recognized at ti

    Ok, I know you, the reader, has heard this complaint posted over and over on the Creative forums, and you would probably tell me to SEARCH THE FORUMS. Well, I did, and I found no answer or solution to my problems. So..here goes nothing.
    I recently purchased a Black 5gb Creative Zen Micro, I was really content and happy with it...that is until I plugged it into my USB 2.0 Card. The moment I do that (I've tried plugging it in into every USB 2.0 slot, and NO, this isn't a hub, but a PCI card), The Zen Micro freezes! I have to resolve this by removing the cover and taking out the battery, then reinserting the battery. At the same time my Zen Micro freezes, a little bubble pops up on my computer screen saying "USB Device Not Recognized". I'm going absolutely out of my mind here, and am on the verge of returning the Zen Micro, and might get a replacement, and if that doesn't work, just returning the Zen altogether for a refund and getting a Rio Carbon. I really like the Zen, so PLEASE PLEASE help me out here!
    Things I've Tried That Did Not Work:
    -Uninstall/Reinstalling Zen Explorer, Mediasource (basically everything on CD)
    -Updating the drivers for Zen Micro found on Nomadness.net
    -Updating Firmware for Zen Micro
    -Going into rescue mode and cleaning up, Formatting, reloading firmware, and rebooting.
    -Trying the USB 2.0 Card in different PCI Slots
    -Rotating the order in which I connect the USB cable to Zen Micro and PC
    -Uninstalling/Reinstalling the drivers, even when the Zen Micro pops up as "Unknown Device"
    -Reading tips/hints on Nomadness.net
    I have scoured the forums, and have not found anything useful or new. I know its not the USB 2.0 Card's problem, since I plugged in my USB mouse into all the ports on the USB Card, and it worked fine.
    Note: When I plug the USB cable that came with the Zen Micro into the integrated USB slots on the motherboard (USB .), it at times, does work, but even then, not a high chance of it happening. Even if I do successfully connect the Zen to a USB . slot without it freezing up, the Zen ends up not being detected by any program, like Window Media Player, Mediasource, or Creative Zen Micro Explorer.
    I am going out this weekend and am gonna try to buy a new USB Cable, and if that doesn't work, returning the cable, and returning the Zen Micro to be replaced. AND IF THAT DOES NOT WORK...GOODBYE CREATIVE! HELLO RIO! But please, any help you guys could give would be greatly appreciated. I will also try to contact Creative Customer Support, but I doubt they'll tell me anything new, if I could even connect to them without being put on hold.
    System Specs:
    Windows XP Professional SP2
    Creative Zen Micro Firmware .02.05
    USB 2.0

    Yep, that's exactly my issues to.....no matter what I've done, including replacing the USB 2.0 card which WAS and Adaptec DuoConnect 2.0 card which works fine with every other USB device ever connected to it, the Zen Micro 6g is NOT recognized by Creative Media Source or WMP. It is only recognized by the PC in Device Manager, and it has a yellow marker on it, which tells me the drivers are not installed. I know I don't need the drivers installed, but even after installing them, it tells me the drivers are not installed.
    However, the answer is: it's definitely not the Micro, since it works flawlessly on my other PC and on my Toshiba notebook. So, it's some compatibility issue on that one PC. Since I refuse to let things be, I am reformatting that PC, reinstalling from scratch with WinXP and sp2. This PC has WinXP Pro but it has other issues so a reformat is in order anyway. Hopefully, this will resolve the issues. If not, then I say it's incompatibility with the Intel 865Perl m.b. But I'm at a loss as to why it won't work when plugged into the Adaptec card too.

  • IPhone 4 unable to charge and USB not recognized?

    Hi, I've just got my iPhone replaced because the old screen is broken.
    In this new iPhone 4.
    The camera rear, when I take photos, there is a slightly transparent black spot. It annoys me, but I chose to ignore.
    It was fine all morning, till BAM!
    This **** thing came up when I wants to charge my iPhone on my laptop.
    My laptop can't recognize the iPhone. Earlier was fine (when I'm copying photos out), then later when I replug it happens.
    "USB device not recognized. The LAST USB device you connected to this computer MALFUNCTIONED, and Windows does not recognize it"
    This is my first time getting this warning.
    Is there any way to reset the USB port, and redetect the iPhone USB?
    Also, my iPhone can't be charge! I've tried different cables, different power source. None work.
    I assume my cable is not broken because if it is, the my laptop wouldn't detect the USB and that annoying warning won't come up.
    I've have TRIED:
    Soft rest and hard reset on iPhone.
    Restart/Shutdown laptop. Also, deleted Upper Filter from Registry. Removed laptop charger. Unplug all USB.
    Reset all setting on iPhone.
    Clean my iPhone charging port and charger adapter USB.
    My iPhone left 10% of battery, and it's 3AM here. There's obviously no apple store open. There also no Genius Bar in my country.
    And I've observe my battery gone down to 9% and back up to 10%. While I'm typing this, the battery goes up to 11%.
    It's so so so slow. There is no "Charging" sign. Normally, the battery icon on the top right will have a plug sign thingy.
    Now it doesn't show anything except for a red battery but percentage is going up so freaking SLOW!
    *Also, how to update IOS to 6.1.4 (current 6.1.3)? I don't want IOS7.
    Using:
    Windows 8 64-bit
    Fujitsu laptop
    iPhone 4 IOS6
    iTunes 10.7
    Help me, my iPhone is dying. Theres no prob for my old iPhone, geez.

    Just an update:
    I spent many hours last night working on my phone, and after leaving it on my docking station for a few hours, it had enough battery to turn on, though it was only a tiny bit of battery. I quickly plugged it into my PC and was able to load the backup from iTunes from about a month ago, so that it was now my phone again. However, straight away the battery died again, and I left it on the docking station all night, but it never charged. Now it no longer shows the battery sign at all, just a black screen.
    Any help at all would be greatly appreciated, as i was checking out the apple website, and as my phone no longer has warrantly it's going to cost me £125 for a service which ain't cheap!

Maybe you are looking for

  • Items are in different fiscal years - Posting

    Hello Here one user is doing a transaction F-32 for clear customer items.  He has to clear items but the items were posted in different fiscal years.  When he tries to post the document, it gives the message "Items are in different fiscal years".  fe

  • BAPI_ACC_INVOICE_RECEIPT_POST, Accounting Documents grouped?

    Hi there, Hope I'm posting this in the right place. There is a custom program which reads the file from AL11 and then uses BAPI_ACC_INVOICE_RECEIPT_POST to create the invoices. It's creating the invoices but when we view them at tcode KSB1, the drill

  • HASH FUNCTION IN JAVA

    i need help!! i have to create a program in java in which i want to compare passwords by using hash function.More specifically,the parameters of hash should be like this hash(password,salt). which is the library that i have to use and how can i call

  • Reformat issue in JDeveloper 10.1.3

    We are trying to migrate from JDeveloper 9.04 to 10.1.3. It appears that REFORMAT does not handle comments nicely. Here is what we are experiencing: Before Jdeveloper reformat: * Convert String to integer. Defuault to given d if errors. * @param str

  • Will apple tv work in india without voltage converter ??

    thank you...