USB or 1394 inputs for video?

I'm looking digitize some footage to my MBP from some VHS tapes, some DVDs, and TV on my DVR box. So either component S-Video or composite signal to some device. Called "encoding" right?
I don't want to burn DVDs on my recorder and then rip the VOB files with a 3rd party software. Looking at buying either: EyeTV USB converter sold at the Apple store or a Grass Valley box that outputs to 1394 firewire (400 and 800). Twice the cost, but better fps and quality on the Grass Valley?
USB or firewire? Which MBP input is best to use this purpose?
Thanks for any feedback
bc

If your plan is just to digitize the video for watching on your computer, then the EyeTV 250 Plus will be fine.
On the other hand, if you want to edit the videos, then the Canopus (Grass Valley) box is the way to go.
The price difference isn't 2x. The EyeTv 250Plus is running about $165 vs. the Canopus ADVC-110 about $195 (at B&H PhotoVideo).
If you were talking about the EyeTV Hybrid, I wouldn't even bother; it's primarily intended for watching TV on your Mac.

Similar Messages

Firewire to Thunderbolt adaptor. 6-pin IEEE 1394 firewire for video transfer

Will the Apple Thunderbolt to firewire adaptor work with a IEEE 1394 6-pin firewire for video transfers?

You'll need a Firewire 800 (9-pin) to Firewire 400 (6-pin) adapter or cable, but yes, it should then work.
Regards.

Can i use a usb mic input for livestreaming

I'm trying to livestream but theres no mic input on my iMac so could i use a usb-to-mic input for iMac. Thanks

You can use a mic with an 1/8th inch jack in the headphones port. You can also use one of those mics into a 1/8th to USB connector. You can also use a USB mic directly into the USB port.

MiniDisplay Port for Video input on macbook pro?

Can I use my macbook pro`s MDP for video input? Wanna use my Belkin HDMI to MDP.
MBP (Late 2010 model)

No. The mini-DisplayPort on a MacBook is output only. from the MBP to a display or other device.
Regards.

Can i use the iq526 touchscreen as a monitor for another computer? if so, how do i input the video?

can i use the iq526 touchscreen as a monitor for another computer? if so, how do i input the video?
This question was solved.
View Solution.

You know, this is just a thought. I'm not sure the differences between the iq526 and iq770, but as I was looking around I found this article. I don't know if it'll help, but you might want to take a look. Evidently someone figured out how to use the HP touchsmart as an external monitor for his Dell laptop.
GeorgeFN
I work on behalf of HP.

How to use PAL-N for Video Input

Is not a problem with the conection or the cables the problem is that source is PAL-N and I see the image in black and white.
Thre isn't a problem with the input of the card because with the same cables and the same connector but with a source in NTSC (a playstation) worked great
My question is if the problem with the sources in PAL-N is a limitation of the hardware or with with software and if it is workaround
Thanks

Quote
Originally posted by kamaleonb
Is not a problem with the conection or the cables the problem is that source is PAL-N and I see the image in black and white.
Thre isn't a problem with the input of the card because with the same cables and the same connector but with a source in NTSC (a playstation) worked great
My question is if the problem with the sources in PAL-N is a limitation of the hardware or with with software and if it is workaround
Thanks
yes men. there are 3 choices .a s-video,a composite and the another one i can't remeber the clear.
And excuse me. did you play "playstaion" on your pc? how can you do that. i have been try for this. but you know ps have 3 line for conect with TV. one for video, one for audio and another one i don't know how to use.
my problem is when i put my ps on my pc. there are only one socket on video card(MX460-VT) for conect video line. no socket for audio in. some body told me it's on the sounds card. but i did. there are only 3 hell. one for speaker, one for microphone the last one is "line-in" so i put the audio line(from ps) in to he line-in . but i got nothing. how can you do this? tell me please!
Thank you very much.

Need to connect a web cam and external mike to my McBook Pro running snow leopard for a Skype session with another school. Attached an HP webcam (USB) and can't get video. Any suggestions?

Need to connect a web cam and external mike to my McBook Pro running snow leopard for a Skype session with another school. Attached an HP webcam (USB) and can't get video. Any suggestions?

-->Click HERE<-- Does item "B" (Turn video on/off) in the last topic on the page help?
You control the camera for Skype from within Skype, so Skype must be running to running to make video work.
Message was edited by: EZ Jim
Mac OSX 10.7.4

Can OS X 10.8.5 support a Verbatim 2TB Store 'n' Save USB 3.0 Desktop Hard Drive to be used as back-up for videos-photos?

I am considering purchasing a Verbatim 2TB Store 'n' Save USB 3.0 Hard Drive to use as back-up for videos-photos. Does anyone know if OS X 10.8.5 supports a drive this size? ( I know that I'll only have USB 2.0 capability). My system is an early 2009 24" iMac, 2.93 MHz Intel Core Duo, with 8GB 1067 MHz DDR3.
I would appreciate any feedback/recommendations. Thank you for your consideration and support!

The size is not a problem. While the drive will work it will work as a USB 2 drive you are paying extra for USB 3.
If you plan on upgrading your system then getting a USB 3 drive now might make sense but if you have no plans to upgrade there is no reason to spend the extra money.
The drive, even as a USB 3 drive, seems a bit pricey. Have you looked at other drives? OWC, Amazon and Newegg.com might have better deals.
regards

X1 and USB Port Replicator with digital video - hangs system

Hi
with the X1 to help with docking it everyday at the office I have a USB Port replicator with digital video. I am not using the digital video but the USB ports, head phone and mics plus ethernet.
When I plug it in it detects it OK, I then installed the software. But after reboot it looks to stall when logging into windows, screen flickers back and forth and locks up the operating system. I unlplug it and reboot and window is working fine.
Note as I mentioned I am not using the digital output but instead using an external monitor via the display port on the back of the laptop.
Also its is very slow to boot (Lenovo bios splash screen is there for about a minute)
I have gone into the bios and turned off all other bootable devices just leaving the laptops hard drive.
As a work around I have removed the software and I am getting the basic functionality of the port replicator, but not the ethernet.
I have run the update manager but does not appear to show a need to update the drivers.
Model X1 (1293-CTO)
Windows 7

Hi, I have this same exact problem.
Video (anything from youtube to downloaded shows, movies) will freeze for 5-7 seconds at a time. The sound continues to play while the video is 'frozen', and the video resumes after that.
It will happen on its own, with no bumping, but it is more prone to happen if I do something like increase the volume within the media player.
Any suggestions are much appreciated!

How do I use my iMac's Firewire 800 port to connect to my external hardrive using a USB Micro-B input?

I have a late 2009 iMac with Firewire 800 input on the back. I have a Western Digital Passport external hard drive with USB Micro-B input that I would like to connect to the Firewire (4 USB inputs aren't nearly enough on the iMac). I can't find an adapter to do this. Can someone please help?? As an alternative, is there an adapter that will convert the Firewire 800 to standard USB2.0?

USB and FireWire work in very different ways, so there is no adapter.
Instead, you should just get a USB 2.0 hub, like this one
http://eshop.macsales.com/item/NewerTech/USB2HB7PRO/
There are many choices, but be sure to get one that is powered (it comes with its own power supply). Cheaper hubs rely on the computer's USB port for power.

Connecting the canon SX50 to HDTV for video playback???

Connecting the canon SX50 to HDTV for video playback???
ok, Got this Camera, like it, except for a few confusing issues. I was told, in order to playback HD video onto my HDTV Samsung, with an HDMI4 on the left side of the TV, all I needed was a HDMI to HDMI cable.
(#1) Shut off both TV and camera, plug the cable into this HDMI plugin, turn on the TV and Camera power supply, and it should recognize, then start paying.
Well, I did it both ways, (#1) shut off,then turn on, and (#2) I just inserted the camera's HDMI to the HDMI4 while both were on, and tried opening up the Samsung's' Tools >Inputs, etc, and still nothing!
Is there an easy way to accomplish this?
The second issue i'm having , is how to shut off the slow motion playback, when viewing the videos, which were not recorded in slow--mo, and it's frustrating trying to playback in normal speed, but instead it plays in slow-mo.
I'm not quite sure I'm recording in full HD...The payback is only 60i

Thanks grazie!
Well, i accomplished most of that and at least got the video on the display (Samsung Anynet HDMI3) But no sound!
I was also able to control the SX50 TV Display with my samsung remote, kool.
As far as the playbgack volume, I checked the camera, I did notice the OPERATIONAL SOUND was off, but when I played back the video on the camera itself, i did have volume.
On that subject of Slow motion videos, if i'm watching each video, then see one playing back in slow-motion, does that mean i actually filmed it in slow motion, without knowing? ( i can send it through Pinnacle Studio 15HD and speed it back up, but theres no background volume anyway) if i did unknowingly videotaped in slow motion, i bettter be more observant in the future.
I'm going to increase that ''Operational sound'' on the tools / Camera and try to playback to see if I have any sound.
I have a Yamaha 7.1 reciever, and TV, BD player,Time-Warner cable all is connected to this receiver....I was pushing all buttons for inputs to see which one would work for sound with video, but could not find any. Thanks, or grazie grazie!

Using Powermac G5 for Video playback on TV, Best options?

Have a Powermac G5 Dual 2Ghz '03 with 8gb Ram and an ATI 9600 Pro 256MB dual DVI wanted to playback my files of .mpeg and ,avi movies on my TV used an Apple DVI to S-video cable and did not work. I am using an HP 24" LCD Monitor running at 1900X1200 and playback is on my 32" Tube Sony Trinitron TV would like to use S-video, but also was thinking of buying an Apple TV but really need to save money. Was also thinking of buying a second PCI ATI Video card to run s-video if this is even possible? Any advise would be greatly appreciated...
Jim
Message was edited by: Jim J. Farrell, IV

Hello, what I recommend is save money and buy a new LCD tv I seen really good deals at Walmart 37" 720p for $398, most new tv's comes with a PC input, the video quality is great. After you buy your tv go to this website: monoprice.com and get the cables that you need for a really good price.
hope this help.

Volume control for video playback through Apple TV2

I am trying to configure the volume settings used on airplay through apple TV2 and a macbook pro and Iphone4 all with most recent updates.
I am using the apple remote app on my iphone to control the apple tv.
Whats working:
Using the pandora app on my iphone through aiplay to the apple tv, I can control the volume using the plus and minus buttons on the side of the iphone for volume control. Very cool and easy.
Using the apple remote app on my iphone I can control the itunes volume of different speakers by clicking on the airplay icon and using a slider. Not as cool as using the hard +/- buttons but still works.
Whats not working:
Controling volume on appleTV2 through the iphone remote app for video playbacks like netflix, and youtube.
Why I want this: RIght now I can control most of the multimedia right from my iphone including cranking the music up:) But when I switch over to video(Netlfix, Youtube) I have to get out another remote (stereo reciever) to control the volume. It seems we are so close to being able to control everything off the iphone, the only thing missing is volume control for video playback.
Is there a setting that can be changed or a solution I havent found?
Thanks

Same problem with TV3. HDMI volume output is not adjustable, neither with the original Apple remote nor with any universal. Why ? Every simple settop-box is able to be volume adjusted. And a Mac Mini too ?!!!
I use a flatscreen TV. it has 3 HDMI inputs and one optical out for the audio going to an amp standing behind it. The sound of the TV is switched to go to the optical out.
HDMI 1 is connected to the satellite settop box with its own remote control ( channel +/-, volume +/- etc. ) it work s fine.
HDMI 2 is connected to the MacMini HDMI out with its own remote control ( channel/music +/-, volume +/- ) it works fine too.
HDMI 3 was connected to Apple TV3 with its own remote control ( channel/music +/- but no volume ). I sent the TV3 back to Apple.
What's going wrong in the mind of Apple ? Why is the HDMI volume output of the MacMini adjustable with the Apple remote, and the TV3 not ?
I want not to discuss, wether a 4th remote control is useful or not. I don't want it. I want to adjust the volume with the originl remote control of the specific unit I use, because I need it anyway. It worked since years, but not with Apple TV3.
How can we help Apple to open the volume +/- function on their own remote control ?

Multiple Hard Drives for Video Editing with Premiere Elements 8?

I'm using Premiere Elements 8 for video editing. These are the specs I'm using:
The camcorder I used to shoot the footage is a Sony Handycam with model number HDR-SR12. It's a digital HD video camera recorder that shoots in NTSC 1920x1080i HD recording. The footage was shot with AVC HD 9M (HQ), which records in higher image quality mode. The video camera is connected to my computer through a USB cable.
The computer itself is a Windows 7 desktop computer. The CPU is an HP Pavilion Elite HPE-150f PC with Intel Core i7-860 processor. I imported the video into Premiere by selecting "File" --> "Get Media From" and then choosing the third option from the top.
My import option is NTSC/AVCHD/Full HD 1080i 30 5.1 channel, which matches the specs of the camera I shot the footage with.
Even with the patch 8.0.1 that should be preventing crashing, the program keeps crashing upon startup with one specific video project. Using the exact same video files for that project, I recreated the video, with Elements, and never ran into the problem. Both times, I had the patch installed.
At the moment, I am using only the single internal hard drive for everything (software, OS, video editing, etc.). It is 1 TB in size. However, I am informed that one hard drive is not recommended for video editing, and that I need at least two hard drives, one for OS and one specifically for video editing. I was also informed of FireWire 800 and eSata; however, it does not appear that my computer supports eSata.
Can this problem be resolved if I have an external hard drive and connect it to my computer with FireWire 800 (which the computer supports)? If not, what can be done so this problem doesn't arise in the future?
Thanks for the help.

staring-into-space wrote: My import option is NTSC/AVCHD/Full HD 1080i 30 5.1 channel, which matches the specs of the camera I shot the footage with.
When you import the footage is there a red line across the whole of the timeline?
staring-into-space wrote:
I recreated the video, with Elements, and never ran into the problem.
As you have the recreated project working fine I'd be inclined to put this down as a one-off glitch. If it happens again on a different project then it may be more worrying. You may want to consider using save-as to create multiple versions of your project (note this does NOT duplicate the source clips - so you won't be eating up much extra disk space). You could for example use save-as to create a daily version - ProjectName-Mon, ProjectName-Tue etc....
Cheers,
Neale
Insanity is hereditary, you get it from your children

External drives... whats the best for video.... ?

Hi everyone,
I'm trying to figure out what the best bang for the buck is in regards to external drives, and what works best for video.
I have considered the LaCie enclosures, I have also considered buying a 500 GB SATA to replace the 200 GB second drive I have inside the G5. The issue than is what enclosure works the best with a MAC and is 1394 and will the firm ware support huge video files, for render or exporting?
Can anyone give some advice based on what they have learned through past experience.
Thanks

I've been using LaCie FW (800 & 400) drives for about three years now with only one problem - One of the first drives I bought (I think it was a 120 GB) fried itself a few months ago. I currently have 80GB, 120 GB, 400GB and 500 GB drives, all working fine, never have dropped frames. The LaCie drives are pretty tough too, as I've sent most of them back and forth across the country at least a few times with no problems.
However, be careful if you update the firmware for them - make sure the drive is clean as the firmware update can cause corruption of data on the drive (I found that out the hard way!). Also keep in mind that they do put off a fair amount of heat (especially the big ones) so I wouldn't consider stacking them on top of each other horizontally.

USB or 1394 inputs for video?

Similar Messages

Maybe you are looking for