USB OTG is not connecting in A6000

Please inform how to connect USB storage to Lenovo A6000 through OTG?
Solved!
Go to Solution.

Hi Yoganathan
Unfortunately the Lenovo A6000 smartphone model does not have OTG support.
Regards.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • Blue Snowball USB microphone will not connect to audio hardware

    My new Blue Snowball USB mic will not connect to the audio hardware in Premiere Pro. It connects well to my Mac but I cannot select it in Premiere Pro. Anyone know of a workaround or some help?

    I was able to solve the problem by adding a Mono track first, then recording to that track.  It's strange I have to do this, I have a Windows laptop at home that I use with CC 2014 and a Blue Yeti and Premiere just "knows" that I'm trying to record and makes the change. 

  • My usb modem will not connect to the internet after upgrading to OS X. The modem is active and was issued an IP addreess. There apparently is a connection error between the modem and Safari. Any ideas would be welcomed

    MY USB modem will not connect to the Internet. The modem appears active on either USB ports and an IP address is assigned. The interface between the modem appears to be the problem. Any ideas?

    mcaila wrote:
    Update: I called my ISP (Verizon) and they were not much help.
    What did have you do if anything?
    I also tried to connect with an ethernet cord, and that too is not working.
    What were the results from the Network Diagnostic test when connected by ethernet?
    I've been searching online for hours and have found no solution that has worked.
    What were those solutions that did not work other than what you already mentioned?

  • When i try to connect my iPhone 4S into iTunes through wifi or USB it will not connect the other thing  is when i hook up my iPad into iTunes it will connect through wifi but not USB? Now is this a issue with my iPad and iPhone or is this iTunes?

    When i bought my iPhone and my iPad they both were on iOS 7.0.2 i updated them shortly after thinking the new iOS 7.0.4 was better. i see its not but they both worked great with iTunes before and after the update. My question is why is my iPhone not connecting to iTunes? it will not connect through USB or wifi and i know that the setting to do that is turned on. my iPad connects through iTunes through wifi but not USB. This isnt making any sense but i wanna know is this a iTunes issue? or is it my phone and iPad??

    This can sometimes be the result of a faulty/damaaged USB sync cable.  Do you have another cable you could test it out with?
    B-rock

  • Usb lan is not connecting..

    hi , i m new in arch .... i have an ADSL modem . i connect my laptop using usb port ...but after installing arch , network is not working , here is the lsusb output of my modem : Bus 003 Device 008: ID 12a7:3160 Trendchip Technologies Corp.  Now how can i connect ?

    prism wrote:hi , i m new in arch .... i have an ADSL modem . i connect my laptop using usb port ...but after installing arch , network is not working , here is the lsusb output of my modem : Bus 003 Device 008: ID 12a7:3160 Trendchip Technologies Corp.  Now how can i connect ?
    Okay, I do ethernet networking over a USB port from my N900 to my Arch computers.
    First, have you ever done this with this modem before from any OS?
    The port on the modem will need to Not be in "Host Mode"
    Or you will need a special USB null modem cable AKA, "usb transfer cable" like this...
    http://www.newegg.com/Product/Product.a … 6812200198
    It is very likely that the Modem's usb port is Not in "Host Mode" if it is a USB-B port, so you would not need a USB null modem cable.
    Then I don't know the iproute2 commands, However if you install the net-tools package for the ifconfig command.
    Then you just plug in the Arch Computer to the Modem with the USB cable and run these  commands
    ifconfig usb0 up
    dhcpcd usb0
    Or to set a static IP something like this
    ifconfig usb0 192.168.1.100 netmask 255.255.255.0 up
    route add default gw 192.168.1.1
    echo 'nameserver 8.8.8.8' > /etc/resolv.conf

  • Camera / USB card reader not connection to macs anymore - fine with PCs

    Hi there,
    I have a Canon EOS 50 which has a CF card - I normally connect this to our macbook pros with a crd reader via usb. Alternatively, I connect the camera directly.
    Yesterday, something started to go wrong.
    I was connecting the card to download photos - at first it recognised the card as an external drive, but was taking ages to read the photos. Then it flashed an error message up that it couldn't read the format of the disk (it had previously for about a year!).
    Now when I connect the card via either reader or by connection to the camera, it doesn't recognise the card at all.
    I tried this on both my mac book pros we own. Same issues.
    Canon HD camcorder connects absolutely fine via usb, as does Ipod - so it isn't the usb port.
    I think the cards are ok- (same issue with two different CF cards)
    The camera connected no problem to my brother-in-law's vista machine, and downloaded the image files.
    I tried connection with two different usb cables as well.
    Any ideas as to what has happened?
    Thanks,
    ThreeIsles

    Last year I purchased a USB card reader to have available with my laptop when I travel. It experienced the same problems you are having. It also wouldn't work with my G4.
    I looked on the manufacturer's web site and sent their Customer Support an email explaining the problem. They sent me a new reader at no cost. It works. Suggest you do the same.
     Cheers, Tom

  • Sierra Wireless USB card  will not connect

    I have purchased a Sierra Wireless USB card (AT&T USB Connect 881) to use with a iBook G4. The green power lites are solid green. However, I can not get a signal from AT&T. No one has been able to help solve this problem. I am ready to return it to AT&T for a refund.

    Thx for ur reply. I just checked the model of the USB adapter is Belkin Basic N150.
    The xp is able to see and identify the iphone wireless network and shows it in available networks with full signal strength. Once I click on connect then an alert message says that it is detecting network type pls wait. Then another message appears stating that "selected network may be no longer in range. Pls refresh the list and connect again"
    As suggested by you I will try it on windows 7.

  • Connect Encore with external hard drive through micro USB OTG cable

    Hi
    I am using a micro USB OTG cable to connect the encore with a (get this) toshiba 1TB external hard drive, but when i connect the two, the hard drive connects and then reconnects every 5 to 10 seconds ... and this goes on constantly. This is getting beyond frustrating. Any suggestions ?

    Yea, it's not gonna power anything that needs 2 USB ports as such need more than 500ma. There may well be a low power USB2 spec for tablets Jerry, but what I meant to refer to us the common 500ma standard USB port spec that device manufacturers generally expect. Sorry for being misleading. Basically one can expect issues from any port designed lower than the 500ma spec but I am sure the Encore is designed for the 'full' 500ma, so any example putting out less is below the designed spec. I still suspect the OTG cable first though.

  • USB port on my iTouch will not connect to anything

    My USB port will not connect to any jack I have. If there is a cheap and or easy way to repair that will be great.

    This is exactly what's happening to me. It says that it is connected but when I try to connect to like safari or iTunes, stuff like that, it doesn't work!!!!!!!

  • I have a Canon MX420. The scanner WILL NOT connect to my PC. I am ready to toss Canon products!

    I have been several months now, unable to scan anything.  It always tells me either the usb cable is not connected, or the scanner is shut off.  I followed ALL DIRECTIONS to connect this device -- I even bought a new cable, all to no avail.  I have read many posts and suggestions, and again nothing seems to help.  I have uninstalled and then reinstalled the program - again with no results.  All other components of this device seem to work great.  Also, when I first purchased the device, it worked great.  Then, several months back, it failed to recognize the scanner.  I really wondered about a new cable, etc., and finally bought a good one, but it didn't help.  I hate to trash the device just because of the scanner, as somehow it seems a simple 'correction' would get things back in order; however, no one seems to have any suggestions that actually work.
    I have made sure to follow the dirtections to a "T" regarding setup -- and must have succeeded initially, as it used to work.  I use Internet Explorer 11.0.16 .  I have totally updated drivers in all areas.
    Any and all help would be appreciated.  I am not a 'whiz' when it comes to computers, so if anyone is interested, I would appreciate a response at my email address of [email address removed in accordances with privacy guidelines], as I had a difficult time finding this website.
    Thank you sincerely,
    Wm. D. Davis

    Hi, papineaubill!
    Welcome to The Canon Forums, and thank you for your inquiry!
    We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.  If you live outside the United States, please click here and select your country or region for your support needs.
    Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
    Thanks for choosing Canon!

  • HT4101 I can't use my lightning to USB camera adapter to connect my new Sony Cybershot DSC-W730 to my new ipad Air. It says the connected device needs too much power. Any ideas what to do?

    Has anyone a solution to my newly purchased lightning to USB camera adapter not connecting my Sony Cybershot DSC-W730 to my new ipad Air? It says the connected device requires too much power.

    Use the camera's SD card.
     Cheers, Tom

  • Ethernet port not connected

    Hello,
    Since a couple of hours, my Ethernet interface (through a Thunderbolt or USB connector) remains "not connected".
    I couldn't find a clear answer to this problem ... Any idea ?

    Try resetting the SMC and PRAM.
    http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US
    http://support.apple.com/kb/PH14222

  • Connected usb driver is not detected in window 8.1

    hey .....
     HP 250 G3 notebook
    connected usb driver is not detected in window 8.1 after update BIOS software ....my current BIOS software version  F.22 .... so plsss...fix this problem......

    @jeet2113 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • My ipod touch has a usb cable picture with an arrow pointingto the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the powerbutton is pressed. what can i do to fix this?

    my ipod touch has a usb cable picture with an arrow pointing to the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the power button is pressed. what can i do to fix this?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

    hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • Move Users folders from external drive to a new internal drive

    Hi All, I have a white Intel iMac running Snow Leopard. I have kept the Users folder (4 users) on an external hard disk (too many photos and movies). The internal hard disk recently died, but since all user data was on the external, I wasn't too worr

  • How can I get a parameter back into a servlet invoked from an IMG tag ?

    I'm using a servlet to create several graphical plots per JSP i.e. per HTML page. Each graph is supposed to be different, according to a parameter which I want to pass back from my JSP. I'm getting several plots but they're all the same! I've tried s

  • Hii all, how  can we create a report for purchase tax register

    Purchase Tax Register 2:        Fields on selection screen (input screen) : Vendor Code from to , Date from to, Material Type from to, Tax Code from to .              Field in the output List : Document Number , PO Number ,PO      Date ,     Vendor C

  • Need help in Bpel transformation

    Hi I am reading the xml data file through partnerlink , the receive activity is dispalying the xml record. I want to transform that data into target xsd.The transform activity is not getting assigned. Regards mki

  • OBIEE Start/Stop Services failed(After LDAP Configuration)

    Hi , We made some changes(that is we have added new OID and configured the new OID based upon the Oracle BI security guide which is in Oracle Site ) to the LDAP configuration in OBIEE web console and it prompted for a restart of the OBIEE services .