USB over capacity when I connect my Ipod Nano

Brand new Ipod (no songs), brand new laptop. Why would my USB be over capacity?

The error message I get is:
"Power Surge on Hub Port
A USB device has exceeded the power limits of its hub port."
Any thoughts of what to do?

Similar Messages

  • When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

    When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4. Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
    7. Check for third-party software conflicts.

  • ITunes 7.0.2 crashes when I connect my iPod Nano

    iTunes 7.0.2 crashes when I connect my iPod Nano. What can I do about this?
    Thank you!

    Try here.  http://www.ehow.com/how_4882455_repair-corrupted-ipods.html
    http://support.apple.com/kb/TS1405?viewlocale=en_US

  • When i connect my ipod nano to my computer it does not light up and i get a message saying the usb devive has malfunctioned

    I need some help here as I believe my ipod nano has crashed or something is terribly wrong. When I plug in the usb to my laptop I get a message saying the usb device has malfunctioned. My ipod does not light up. I have tried powering it on manually and nothing works. Help, this is going to ruin my workouts!!!

    I'm not sure what the glitch was, but after I posted the problem, I called Apple and got a rep to walk me through some troubleshooting tips such as holding down the nano power button while plugging in the usb cable....nothing worked. Eventually, they scheduled a maintenance /replacement service.
    I got the box yesterday and was about to put it in for shipping to Apple, when I decided to try connecting it to my laptop one last time. Viola! it started back up again and is currenting syncing as I type. Guess it was just a bad glitch of some sort. Anyone with a similar issue, perhaps you may want to wait a few days and see if it solves the issue.I hope this helps.

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • When i connect my iPod nano 4th gen. to my PC, it shuts down, restarts and says "restore via iTunes" or it completely deletes all my music. What to do?

    I know my iPod is an oldie, but maybe someone can help
    I restored it 10-times, but it isnt working.
    The Problem just happens, if i connect my iPod to a USB-30-pin cable, not when i connect it to my dockingstation.
    I have the newest iTunes Version, newest Windows 7 Update and the newest IPod-OS.
    Help me please ;(

    iOS: Device not recognized in iTunes for Windows - http://support.apple.com/kb/TS1538

  • Problem when I connect the Ipod nano !

    every time I conect my ipod nano to my computer (windows xp) the ipod dont respond...I restart it but it happen again...
    please I need help

    ok well i have just about had it with this ipod
    given to me as a christmas gift from my father, purchased a a proper retailer in thailand...and now when i return home it wont connect with my pc!
    im like what, does it have jet lag...
    it shouldnt since it has been 3 months now...and i have at last given into formatting, since one discussion said it seemed to be a sucess..
    it isnt ok.
    i tried...the famous 5R's
    but intersting fact maybe...when i restored, it said it had a problem mounting with the ipod...so i thought it must be an internal damage with the connecter, but it cant, it connects with the charger and is visible in My COMPUTER
    so why do i have such a stubborn ipod...
    well im going to take it to a shop here, and get it either repaired before my eyes or i want it replaced, and no **** about purchase slip...
    ipod (no matter where it was bought) should be quality and this is just rubbish
    HELLO IPOD people, are you not seeing this and trying to do something about this...maybe we should go the papers and report shocking after-sales services..and warn people to not buy ipod as they malfunction sooner or later and just become a tiny peice of scrap!
    somebody...i want a solution!

  • Itunes freezes when I connect my ipod nano

    Thanks Santa for the new iPod Nano. Unfortunately, every time I connect the ipod to the computer, iTunes freezes and I have to completely reboot the PC. Very frustrating! I have reloaded all the software from the CDs four times, after unstalling it, to no avail. Interestingly, I have managed to download onto the ipod on one occassion and then once the download was complete, itunes froze. Any help would be much appreciated
    hp compaq nx9010   Windows 2000  

    Just in case, let's doublecheck to see if you're accidentally running two different versions of iTunes (the new 10.6.1.7 and one of the old ones with the freeze-on-nano-plugging-in issue.)
    There's some information on troubleshooting that in the Opening iTunes section of the following document: 
    Troubleshooting iTunes installation on Mac OS X

  • When I connect my iPod Nano and it opens, it won't let me choose syn tunes from devices. I just bought a new Laptop PN, not MAC but I can't sync

    Syning in new Laptop PC

    rubicon53 wrote:
    I just bought a new laptop and my ipod nano will not stay connected to my computer.
    I cannot transfer any of my songs to my new laptop
    How to use your iPod to move your music to a new computer

  • HT1335 NOTHING happens when I connect my ipod nano 6th gen and PC!!

    I just got an ipod nano 6th gen, and when i plug it into my PC my computer makes the sounds it always makes when you plug something in, but my computer/itunes doesn't reconized my ipod!!! Help??

    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Itune freezes on my Windows 8 when I connect my Ipod nano,why?

    I have tried many things other discussions have advised, and nothing has worked. I have more than one Ipod nano and they seem to work just fine. I have also tried changing the cord and that was a fail as well. Any new info could help.

    Hello Jim,
    I would be concerned as well if my iPhone was not recognized by iTunes. I recommend the following article to troubleshoot the issue you described:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT1399 I just downloaded the newest version of itunes, and when I connect my ipod nano (3rd gen), I can no longer see my playlists (on the left hand side). I hate the new format...any way to revert back to the old one?

    I just downloaded the newest versionof itunes. Now when I plug in my ipod, I can no longer see my playlists (listed on the left hand side). The new format is very confusing! How do I drag and drop songs into specific playlists I have?  Is there a way to revert back to the old itunes?

    I had the same question. Someone answered perfectly here post https://discussions.apple.com/message/20575126#20575126
    The answer was click View > Show sidebar. Devices and playlists will display in the left sidebar once again.

  • TS1372 when connecting my ipod nano to itunes, it states unknown error (2005) ? Thank you

    When I connect my ipod nano to itunes it shows an error, unknown (2005) and it my ipod doesn't appear. I have a shuffle and it recognises that fine. Has my nano given up or is there something I can do?
    Thank you for any help

    Did you already try the suggestions mentioned in this article? iTunes: Error 13019 during sync

  • My ipod 1st gen battery went totally dead because the usb cable was defective. I've changed the cable.  now when i connect my ipod to the netbook, itune is not launching automatically and windows does not recognize it......how can these issues be resolved

    My ipod 32gb 1st generation battery went totally dead because the usb cable was defective.  I have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it.  Nonetheless it is charging.  However can i resolve these issues bearing in mind that i am not tech savvy?

    have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it. 
    Try disabling a/v software and turn off the Firewall on your PC.
    Disable antivirus software
    Turn-Windows-Firewall-on-or-off
    Then connect the iPod to your computer. Launch iTunes. If your computer still won't recognize the iPod check out this article.
    http://support.apple.com/kb/TS1538
    Once your iPod is functioning again, with it connected to your computer, launch iTunes. Select the iPod under Devices in the source list on the left.
    Select the box next to:   Open iTunes when this iPhone is connected
    That way iTunes should open automatically when you connect your iPod to your computer.
    And iTunes / Preferences - Devices. You can have your iPod sync automatically whenever it's connected from the Devices pane.

  • Computer reboots when I connect my iPod to a USB 2.0 slot

    Here are my specs:
    - I have the new iPod 60 GigaByte hardrive version.
    - Operating System on my PC: Windows XP
    - CPU: AMD Athalon XP 1.8 gHz
    - My PC is several years old and has four built-in USB 1.1 slots. My iPod works on all of these USB 1.1 ports, albeit slow. (And when I connect iPod to these slots, I get the message telling me I have a high speed device connected to a non-high speed USB port, which I understand.)
    - I just installed a Dual-Link USB 2.0 and Firewire PCI card (from ADS tech) into an empty PCI slot on my PC. It has 3 USB 2.0 slots and two Fire-wire slots. The card is properly installed because windows immediately recognized it.
    Now, I have tested two other devices on my new USB 2.0 slots. I have tested my mouse and a logitech gaming controller (although these devices are actually based on the older USB 1.1 technology), and these devices work in the USB 2.0 slots.
    But, when I connect the iPod to any of the USB 2.0 slots, I get the little bell sound meaning that the computer is recognizing it. The iPod then displays the "Do not disconnect" message. But then the computer will begin rebooting by iteself. It will then attempt to reboot windows and almost gets there, but then reboots again. It continues this never-ending cycle of rebooting until I disconnect the iPod and then the computer reboots completely. Inserting the iPod will cause it to reboot again. This happens whether or not I have the iTunes program running.
    Can anyone give me insight for resolving this problem? Has anyone else had this problem before?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

Maybe you are looking for

  • FORM and JSP in the same page

    Hello All Is it possible to pass variable from a html textbox to a JSP? but they both are in the same page. For this purpose, I have a created a index.html, which contain two frames, top.html and bottom.jsp. There is a textbox in the top.html, it col

  • PL/SQL Parsing of XML File

    Hi, I need to use PL/SQL to read from XML file and from what I understand, create a table in the db where the data from XML file will go. I'm pretty new to PL/SQL and XML...how do I get started? Am on 10g XE on local machine, but have access to dev 1

  • I have a Belkin bluetooth keyboard attached to my Ipad 3. I would like to know if there is any way to have the arrow keys scroll down when browsing web pages?

    I just got my Ipad 3rd generation a few days ago and for my case I got the bulky BELKIN Bluetooth keyboard. I notice that when I press down the arrow keys it does not seem to scroll down when searching a web browser or looking up web pages. However i

  • Preview.app crashes whenever I use a key command

    I've had this very annoying problem for quite a while now, and so far I haven't been able to find a solution for it. Whenever I use a key command in Preview.app it either freezes or crashes or both. I can use all the menu options, just not trigger th

  • Datasocket write error when launching an application

    I have invested a lot of time in an applications that uses a number(>100) datasocket connections to exchange data between an application and plug in modules(called vis). I have two errors relating to the datasocket server for this application: 1.) Wh