USB Port Expansion Card for SDXC Slot?

Are there any? I've seen plenty of 4-port USB PMCIA expansion cards... they're not compatible though, are they?
TIA

Not for the SD card slot. That's really a very limited, single-purpose device, not adaptable to the great variety of devices that PCMCIA or ExpressCard slots can serve.

Similar Messages

  • USB and Firewire Card for Mac Pro 3.0

    I am running out of USB and Firewire Ports. Any suggestions on expansion cards for Firewire and USB??
    Thanks
    John

    The Sonnet PCI USB Express cards have this problem too - for the record. Sonnet know about the MacPro not waking with it installed, as do Apple. I am sure Apple willl come up with something, I may even find a workaround, but it has always seemed that expansion cards with all my Macs [ waaaay too many] have produced unpredicatable problems.

  • Asus IPIBL-LB expansion card for usb3.0?

    I am trying to upgrade my aging HP a6152n PC once again. I would like to increase USB throughput by upgrading to USB3.0.
    I have windows 7 64 pro installed3 hard drives and have recently purchassed a external WD 4 TB mkybook to use as a backup. It works on the USB 2.0 port but it has the capability to run on USB 3.0. I would like to take advantage of the much higher throughput of the USB 3.0 if I can find a card  and driver that will work on my system.I tried a 4 port expansion card from Inateck but could not get it to work.   Windows device manager indicated Code 10 " This Device cannot Start"
    Any Suggestiions or advice.   Thanks  wyuhasse

    Wyuhasse, welcome to the forum.
    Here is a card that says it is compatible with Win 7 32/64-bit.  There is a "Built-in 4-pin power connector for receiving extra power supply from system".  You should be certain to connect it.  Read the Customer Reviews to see what users have to say about it.
    I suggest checking your Inateck card to see if it has the extra power connector.  If it does and it is not connected, this could be the reason for it not working properly.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • USB 2.0 card for my 2011 Mac Pro. Reccomendations?

    I need a USB 2.0 card for my 2011 Mac Pro desktop. Can anyone reccomend a product or what I need to look for (host interface etc) when searching for a suitable card?

    Amazon UK then perhaps? OWC/Macsales is a good place to see what products they have as they are Mac primarily and support Mac Pro of course.
    the products they have will list and of course they need to work in 1x as well as 4x.
    Lion has been out a year, and unlike ML or early adopters most should or will but again, look and make sure it says 10.7.4, some may say 10.6 or later - have to ask.
    You can also dig around and find what chip a product uses and is based on and then shop for similar chip based.
    Can we assume you need more USB ports, or you have dead USB on the Mac and not for disk drives in which case USB3 or eSATA are better but USB3 has been iffy on Macs - now that Apple has some and some support in 10.8 while CalDigit card needed drivers for theirs.
    http://www.alternate.de/html/index.html
    http://ssdeurope.com/
    Something like this, but no knowledge or idea - compare it to Sonnettech.com USB 2.0 cards
    http://www.amazon.com/Best-Connectivity-Port-PCI-Express-SD-PEX20052/dp/B003V8AT W2/

  • My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?

    My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?
    Thanks

    Have you updated iTunes with the absolute latest software?  If you have not in a long time, your iPad won't be recognized.

  • On Apple TV. Can the USB port be used for a keyboard and mouse interface

    On Apple TV. Can the USB port be used for a keyboard and mouse interface

    A bluetooth keyboard can be used with the Apple TV.
    There is no need for a mouse with an ATV.

  • PCI ATA expansion cards for PM G4

    Hi Folks.
    So i bought a PCI ATA expansion card for my G4, but the bloody thing won't work. Despite having a Mac logo on the box, the drivers for the card are only compatable with Windows...
    My question is, are there any PCI ATA cards around these days that are Mac compatible and dont cost an-arm-and-a-leg?

    What brand/model is it?
    Here's an alternate card http://eshop.macsales.com/item/Sonnet%20Technology/THDMW/
     Cheers, Tom

  • Usb port/sd card reader recgonition issues after Yosemite?

    I recently downloaded Yosemite to my macbook pro and hadn't noticed any issues till I tried to upload some photos. I usually just use the sd card reader but quickly found that each time I put an sd card in (I tried several just to make sure it wasn't an issue with my cards), there was no recognition at all, not in the left hand sidebar in the finder window or in the disk utility. I next tried out the usb ports with my ipod, external hard drive, and camera's usb cord. The first usb port is recognized in both itunes (when my ipod is connected) and in the disk utility (still not in the left hand sidebar finder window where I could just click on the device and see the contents it held like it usually has done in the past) however when I connect anything to the second usb port, I can hear the external harddrive revv up and my ipod starts to charge, but it isn't recognized in the computer by itunes or in disk utility. I'm not sure what to do since I did not back up my previous drive before updating my software and am a photographer who relies on being able to upload my photos on my computer. All my ports were working just fine before I updated this past week so I'm wondering if it has something to do with Yosemite?
    I've made sure my external disk's option was checked in >finder>preferences, tried to reinstall yosemite, and have reset my PRAM and SMC and unfortunately found no difference.

    I had this problem and don't at moment. Not sure of cause. Some have found that cleaning slot with compressed air or contact cleaner helps. Search Yosemine (this) forum for post headed "SD card reader does not work anymore" by GabTH (11/2/14) for a software fix. (Sorry, not a frequent user anymore and can't easily paste a link.)

  • 100mbps multi-port fiber card for Sol10?

    Does anyone know of a multi-port fiber card (PCI) with Solaris 10 support that supports 100Base-FX ? We have a requirement to provide 4 such ports for a customer, and are having a tough time finding such a beast. We can use either quad-port or 2 dual-port cards, but we don't have enough available PCI slots to use 4 single-port cards.
    Basically, we're looking for something similar to this, but with support for Solaris 10:
    http://www.aei-it.com/hardware/fastenet/p430fx.htm
    We've been informed by the vendor that these only support up to Sol 8. We're working on getting eval units in, but are wondering if anyone has used anything similar in the past?
    Thanks!
    Eric

    Due to customer specification constraints, media converters/switches are unacceptable. :( First thing we thought of, too. Also, 3 of the 4 ports are connecting to 100mbps digital hardware boards via UDP, so the mixed speeds probably wouldn't work out if we were to use gigabit fiber.
    Eric

  • B570 USB ports and card reader result in error of "not accessble" until system is restarted

    Hello,
    I have a new IdeaPad B570. Whenever I plug in my external hdd or other device (like iPod) in any of the three usb ports I get an error that the drive is not accessible...until I restart the computer and then it recognizes it with no problem.  The same thing happens when I put my SD camera card into the card reader.  This is annoying for things that should be plug and play.  However, when I plug in a mouse it connects immediately.
    Anyone have any suggestions?
    Thank you!
    Marcy
    Solved!
    Go to Solution.

    Check support-drivers and downloads for bios update.

  • K450 USB Ports and Card Readers not working

    When I plug in devices to my K450 ideacentre desktop USB ports, they are not recognized.  The same for a couple of memory cards I have tried in the card reader.  These are all working fine when put in other computers.  The card reader and USB ports do work when I insert a multi card reader into the USB port or a multi USB port into the USB port (and then use either of those to read the same external hard drive or memory cards that don't show up when installed directly).  Any idea what this could be?  I'm sure it's something simple that I'm missing but I can't figure it out.  I'm running Windows 8.  Thanks for any help!

    I wanted to add to this...I did plug in a CF card the other day and that was recognized.  I then tried my external hard drive directly again in a front USB port and it worked for a while (an hour or so).  Then it suddenly was not there anymore as if I'd ejected it even though I didn't.  Tried to put it back in and nothing.  This tells me it may be a hardware problem since it "recognized" it for a bit.  It's very frustrating.

  • USB 2 PCI Card for G4

    i am at a point where i need to add usb ports to my g4. i have an external hub, but hate it. wires everywhere, extra wall wart. will any pci usb card work, or are there certain requirements that i need to look for?
    thanks,
    typhon

    HI typhon-
    Any USB PCI will not work. An Ali or VIA chipset is almost certain to cause problems.
    Any USB 2.0 PCI card with a NEC chipset will work best.
    Ratoc is a definite winner.
    The brand, though, is not nearly as important as the NEC chipset.
    Even if the card doesn't state "Mac compatible", if it has the NEC chipset, you should have no problems.
    Also, you won't need any drivers that are often supplied. Tiger will natively support the chipset/card.
    BTW, many "PC brand" cards, with the NEC chipset, can be had for $10-$15. Cheap, and they work.
    To check on compatibility issues with various cards, see Xlr8yourMac.

  • Can USB port be used for USB fan power?

    I’m considering helping with the heat issue by getting a Targus 2 fan laptop chill pad. On sale at walmart.com for about $16 + shpg.
    Problem is that it is powered by USB and I don’t know if the USB port on the ATV will supply the minimal power that it requires.
    Anyone have a clue about this?
    24” iMac Intel Core 2 Duo   Mac OS X (10.4.9)   2.33/2GB RAM/256MBV/500/WIKM

    Please forgive my impatience with this question.
    I remembered that I have a Kensington light. Fly light I think it is called. Anyway, I hooked it to the ATV and it worked.
    So the answer to my post, yes it does supply power. Sorry that I didn’t think to check it before posting.

  • USB TV Tuner Card for Macbook Air

    Dear all,
    Hello! i'm using a Macbook Air (mid-2012) 11.6". i'm in need of a USB tv tuner card. Which brand i should choose?
    Please note that, Gadmei is the most available brand in our country. is it possible to use this brand of tv tuner (USB) with Macbook air? OS is- MacOSX 10.9.2 (mavericks). Please suggest.
    Also plz tell me is there any way to use Gadmei or RealMedia TV tuner with mac without official mac driver? (i mean using EyeTV or such third-party TV app)
    Thanks in advance.
    Regards.

    Unfortunately most of these TV devices require USB2 bandwidth so are not suitable for the iMac G3. 
    The Firewire versions (EyeTV 310, 410 and 610 depending on input type) are the only options.
    The EyeTV 250 is an analogue only Tuner that does work on USB1.1 but in a low quality mode only.
    mrtotes

  • My trackball/mouse hangs! They work,then they don't. If I switch usb ports they work for a while.

    I have a Pavilion a1657c using Windows XP.  I use a Kensington trackball and lately it has been hanging up on me. I switched to a Logitech mouse and it did the same thing. Now, I have both plugged in and if I switch usb ports one of them will work for a short period of time and then hangs. If I switch usb ports again, one of them will work for a while....I never know which one is going to work..very sporadic and it is driving me nuts. I am semi-literate with computers, but no whiz. Somebody help me of this road to nutsville..?

    Hello icnhndlu, This appears to be a USB common issue, since you mention the issue occurs on different USB ports and devices.
    This may be a hardware fault, but you might try uninstalling all the USB devices in the Control Panel, Device Manager. Then reboot the system and see if the operating system will detect new hardware and install the drivers for the new hardware.
    The drivers are provided by Microsoft within the operating system.
    Not sure this will work, but may be worth a try.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

Maybe you are looking for