USB port issues when using iphone5

I have recently upgraded to an iphone 5 but whn I connect to my imac (intel/2009) I get error message up saying the usb port is being disabled as the device is drawing too much power. This means i cannot charge the phone from the imac nor connect to itunes. Has oneone else had this issue? can anyone suggest how I can resolve it.
cheers

I'm not sure how the issue can be resolved but I'm having the exact same problem when I try and charge my iPhone5 on both my macbook pro at home and at work. I have no other usb devices in use when this happens and I cannot find a way to rectify it so you're definitely not alone.

Similar Messages

Thinkpad W530: None of the USB ports work when used with a 4338-35U replicator

I have tried mouse. keyboard and a generic USB stick with a LED. None of the USB ports work on the replicator. Everything works fine when connected directly to the W530. The replicator ports must not have power because the LED doesn't come on.

Hi mmjmm123,
How long have you had your replicator?
Has it always been like this?
This link is to the Lenovo User's Guide for replicators:
http://download.lenovo.com/pccbbs/mobiles/43r8770_users_guide.pdf
Scroll to Chapter 5 for troubleshooting procedures.
Replicators do have limitations which can be found here:
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69755
Check these sources and let us know how it works for you so we can share the knowledge.
Enjoy your day!
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

HT2188 i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/s

i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen

Have you downloaded and installed the latest version of iTunes from here:
http://www.apple.com/itunes/download/

Some issues when using my N8 as modem over BT.

Hi folks!
I'm using my N8 to get internet access when I'm traveling for my macbook pro (late 2011 model). Few issues have apeared. First, getting the connection working might take 2 to 4 attempts. Second, when downloading large files over http the connection some how hangs, N8 shows no data trasfers from the 3G network and the connection is un-usable. I need to close it and start all over again.
My N8 is fully updated Anna. And the OSX is fully updated Lion.
Happy holidays!
-Temeteus82

I do have a strong signal. I was able the day before yesterday to be on the internet for more than 5 hours without it disconnecting. Then I tried yesterday to connect to the internet and it started to disconnect again, after a few minutes. I tried again yesterday, via another usb port and I was able to stay connected for longer without being disconnected. I suspect it might be a usb port issue. Let me give it a try a few more time before I jump to conclusion.

JTable text alignment issues when using JPanel as custom TableCellRenderer

Hi there,
I'm having some difficulty with text alignment/border issues when using a custom TableCellRenderer. I'm using a JPanel with GroupLayout (although I've also tried others like FlowLayout), and I can't seem to get label text within the JPanel to align properly with the other cells in the table. The text inside my 'panel' cell is shifted downward. If I use the code from the DefaultTableCellRenderer to set the border when the cell receives focus, the problem gets worse as the text shifts when the new border is applied to the panel upon cell selection. Here's an SSCCE to demonstrate:
import java.awt.Color;
import java.awt.Component;
import java.awt.EventQueue;
import javax.swing.GroupLayout;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.border.Border;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.TableColumn;
import sun.swing.DefaultLookup;
public class TableCellPanelTest extends JFrame {
private class PanelRenderer extends JPanel implements TableCellRenderer {
    private JLabel label = new JLabel();
    public PanelRenderer() {
      GroupLayout layout = new GroupLayout(this);
      layout.setHorizontalGroup(layout.createParallelGroup().addComponent(label));
      layout.setVerticalGroup(layout.createParallelGroup().addComponent(label));
      setLayout(layout);
    public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
      if (isSelected) {
        setBackground(table.getSelectionBackground());
      } else {
        setBackground(table.getBackground());
      // Border section taken from DefaultTableCellRenderer
      if (hasFocus) {
        Border border = null;
        if (isSelected) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusSelectedCellHighlightBorder");
        if (border == null) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusCellHighlightBorder");
        setBorder(border);
        if (!isSelected && table.isCellEditable(row, column)) {
          Color col;
          col = DefaultLookup.getColor(this, ui, "Table.focusCellForeground");
          if (col != null) {
            super.setForeground(col);
          col = DefaultLookup.getColor(this, ui, "Table.focusCellBackground");
          if (col != null) {
            super.setBackground(col);
      } else {
        setBorder(null /*getNoFocusBorder()*/);
      // Set up our label
      label.setText(value.toString());
      label.setFont(table.getFont());
      return this;
public TableCellPanelTest() {
    JTable table = new JTable(new Integer[][]{{1, 2, 3}, {4, 5, 6}}, new String[]{"A", "B", "C"});
    // set up a custom renderer on the first column
    TableColumn firstColumn = table.getColumnModel().getColumn(0);
    firstColumn.setCellRenderer(new PanelRenderer());
    getContentPane().add(table);
    pack();
public static void main(String[] args) {
    EventQueue.invokeLater(new Runnable() {
      public void run() {
        new TableCellPanelTest().setVisible(true);
}There are basically two problems:
1) When first run, the text in the custom renderer column is shifted downward slightly.
2) Once a cell in the column is selected, it shifts down even farther.
I'd really appreciate any help in figuring out what's up!
Thanks!

1) LayoutManagers need to take the border into account so the label is placed at (1,1) while labels just start at (0,0) of the cell rect. Also the layout manager tend not to shrink component below their minimum size. Setting the labels minimum size to (0,0) seems to get the same effect in your example. Doing the same for maximum size helps if you set the row height for the JTable larger. Easier might be to use BorderLayout which ignores min/max for center (and min/max height for west/east, etc).
2) DefaultTableCellRenderer uses a 1px border if the UI no focus border is null, you don't.
3) Include a setDefaultCloseOperation is a SSCCE please. I think I've got a hunderd test programs running now :P.

Does resteasy API have class loader issues when using via OSGi

Does resteasy API have class loader issues when using via OSGi

Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum.

Is 10.9.4 having USB port issues?

Is 10.9.4 having USB port issues? I'm noticing copying files to USB ports on my Mac Pro (the front two anyway) seems to be like molasses and give me the pinwheel of death.
Anyone?

Try resetting SMC.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".

MSI Gaming 5 USB ports issue

Hello everyone,
I apologize if I posted this in the wrong section, so as the title says it, sorta of a huge USB ports issue just happened after installing the motherboard / windows / all drivers, even restarted a few times
then tested the processor and video card.
Everything ok to that point, I left the pc opened for 3 hours, shut it down, the next day..I couldn't type the windows password.
Alright restart, that maybe one of those kinks that goes away on it's own I guess..Switched each device in different ports..nothing, tried only one device..still nothing.
Tried only usb2.0 ports then 3.0 port > a a little panic kicked in :D
So, in my bios I was seeing 2 keyboards 2 mice..ok...got a bios update from msi site..latest one..flash ..reboot..still nothing.
Strange part was..they were working just fine in bios and everything prior to windows loading, even after that mouse was showing power ( led was ok )but no functionality.
Safe mode didn't help..the miracle of last known good config saved the day.
BUT after choosing the option..ok it started working....randomly..I was typing the windows pass...and right in the middle ...it stopped again..mouse was working...tried again..stopped at 75% of the password.
Tried again...it worked > Reinstalled every driver.. seems stable for now, though being day 2 of this whole deal.
So if anyone honors me with enough time to read the story and maybe relate I would glady appreciate it.
Guys if anyone had any usb related incidents with any of the Z97Gaming boards please share
If I missed anything, please ask.
Thank you

Hello everyone,
Sorry for the delay in all of this and thank you for the input.
Specs are below, and this is something currently in the process of being upgraded.
I7 4790k / MSI Gaming 5 / Sirtec 500W / 8 gb ram Corsair Vengeance / AMD sapphire 7970 GHZ / one single HDD 1 GB
The Windows installation went fine on 2 other colleagues from work.
For the moment stable, I removed and reinstalled all USB related drivers.
It was a weird one though..

Odd issue when using UDT (user defined type)

Hi all,
11g.
I ran into an odd issue when using UDT, I have these 4 schemas: USER_1, USER_2, USER_A, USER_B.
Both USER_1 and USER_2 have an UDT (actually a nested table):
CREATE OR REPLACE TYPE TAB_NUMBERS AS TABLE OF NUMBER(10)USER_A has a synonym points to the type in USER_1:
create or replace synonym TAB_NUMBERS for USER_1.TAB_NUMBERS;USER_B has a synonym points to the type in USER_2:
create or replace synonym TAB_NUMBERS for USER_2.TAB_NUMBERS;Both USER_A and USER_B have a procedure which uses the synonym:
CREATE OR REPLACE PROCEDURE proc_test (p1 in tab_numbers)
IS
BEGIN
NULL;
END;And in the C# code:
OracleConnection conn = new OracleConnection("data source=mh;user id=USER_A;password=...");
OracleCommand cmd = new OracleCommand();
cmd.Connection = conn;
cmd.CommandText = "proc_test";
cmd.CommandType = CommandType.StoredProcedure;
OracleParameter op = new OracleParameter();
op.ParameterName = "p1";
op.Direction = ParameterDirection.Input;
op.OracleDbType = OracleDbType.Object;
op.UdtTypeName = "TAB_NUMBERS";
Nested_Tab_Mapping_To_Object nt = new Nested_Tab_Mapping_To_Object();
nt.container = new decimal[] { 1, 2 };
op.Value = nt;
......This code works fine, but it raises an error when I change the connection string from USER_A to USER_B, the error says:
OCI-22303: type ""."TAB_NUMBERS" not foundInterestingly, if I change op.UdtTypeName = "TAB_NUMBERS"; to op.UdtTypeName = "USER_2.TAB_NUMBERS", the error is gone, and everything works fine.
Anyone has any clues?
Thanks in advance.

Erase and reformat the ext HD. Then, redo the SuperDuper! backup.

Bluetooth issues when using smartwatch on the z1s

I'm having some Bluetooth issues when using my smartwatch. I usually use my z1s with my car radio via Bluetooth to listen to music and for making calls. Now that I got a sony smartwatch I always got problems with the calls. It looks like that the Bluetooth turns off during the call when I'm using the smartwatch. I already tried by deleting and pairing again the z1s, but nothing works. Not sure if maybe the z1s does not support the smartwatch and the care radio Bluetooth connection at the same time. However it works fine when playing music! The problem is just with the calls. This never happens before I got the smartwatch.

I have the Tmobile Z1s and a SW2 and have the same issues with multiple devices:
1) Bose Soundlink Mini
2) Sony MBR-100
3) My car's bluetooth
4) Ford Sync
5) Sony SBH20
6) Motorola S305
If the phone connects to the A2DB device, it will typically play fine for several minutes. Then, audio will drop out. If I do nothing, after several minutes my watch will vibrate to show it has disconnected. Sometimes audio then comes back, and sometimes it doesn't.
Sometimes my phone will not connect to my car. Then, if I can get it to connect, it will only allow for phone audio, not media audio.
This issue has been on (2) Z1s's with the SW2. The first I returned due to touch screen issues, which the second one also has. All of the devices above worked perfectly fine with my Xperia Z, Galaxy S2, HTC One, etc. The Xperia Z and the SW2 never had any problems.
Honestly, this phone has been incredibly frustrating. If the upcoming updates for either the SW2 or Z1S don't fix this issue, I'm going to return it and get something else.

2010 i5 17" MacBook Pro USB Port issue locks up iTunes when attaching iPhon

Two things - 3 USB ports, but only the center one charges my iPhone. Is this a feature or a defect? Also itunes locks up when the iPhone is connected in the only port that charges.

I had the exact same problem as Aaron Scott. I have a Core i5 15" MBP, and the 1st USB port wouldn't charge my phone, but the 2nd one did. Weird thing is my flash drive worked in the 1st one, but it was really slow compared to the 2nd one. I took my laptop to the apple store today, and one of the guys at the genius bar reset the PRAM and then the SMC (System Management Controller). Doing that fixed both my slow boot issue and fixed my USB port. You can try doing that. He did mention to try resetting the PRAM first, then resetting the SMC after that though. Here's the documentation on how to do it:
PRAM: http://support.apple.com/kb/ht1379
SMC: http://support.apple.com/kb/HT3964?viewlocale=en_US

USB Audio distorts when using Stanton T90

I have a Stanton T90 USB turntable that works ok with a PC.
However when used on my Mini Mac after a short time the audio starts distorting.
It seems to be application independent and in the logs I have seen:
Oct 30 23:22:01 Macintosh kernel[0]: WARNING: AppleUSBAudio has detected that a connected USB audio device is sending too much audio data.
Oct 30 23:22:01 Macintosh kernel[0]: WARNING: This USB audio device may not function properly. Please notify the device manufacturer.
Has anyone any ideas how to solve this?
Yours
Leon.

Hello thanks for the feedback.
I've 1Gb of RAM.
It happened when I only had my mouse and keyboard connected with nothing but Audacity running. However my mouse is connected via my Mac keyboard so I could try that on a separate port. From the error it appears that the USB port is not being read often enough.
Unfortunately it seems that Apple drivers can be just as prone to incompatibilities as Windows. You can find hundreds of articles about these issues with both Audio USB and Firewire devices.
My last step before throwing the turntable back at Stanton will be to reinstall my OS (Leopard) to see if an update has caused the problem.
Yours
Leon.

Usb port issues losing memory

I have Macbook unibody 2008 and a strange issue , when i plug in something in my usb ports, hdd memory goes down, decrease......and the notebook work slowly, only solutions it.s reboot the notebook, very frustrating.....anyone have this issue ? any help ? thanks

Are you using original Sony Mobile chargers/cables to perform this function?
PS: Please don't force the charger under any circumstance.
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

C655d-s5130 usb port issues.

OK this just happened suddenly I have a duel boot PC win7 ultimate and Ubuntu 11.10.
the USB ports work fine until I plug my phone into it via USB cable. as soon as I plug my phone in it will completely disable both USB ports. this happens in both windows and Linux.
I have excluded my phone or the USB cord as being the problem as the phone is recognised and works on our other Toshiba laptop and our Compaq desktop. I get no USB problems on those machines.
and just to clarify, both of the USB ports work perfectly with all devices I have tried with the exception of and up until I plug my phone into the computer. any help would be great. thanx!

ummm what exactly are you suggesting by "daisy chain"???
I have to question if that would be the issue as this is a sudden occurrence, I never had any problems before except.... wait... right before it started powering down the USB ports when I plug the phone in it started saying that my USB device had malfunctioned. I don't believe it actually had malfunctioned though. but I'm not a genius haha. hope that helps.
I hate to think that I can't use laptop for my phone as I'm kinda flash happy and I'd like to be able to reflash back to stock when necessary from my laptop rather than the desktop

Oracle SQL Developer issue when using VPN (Cisco)

All,
We've got a somewhat obscure issue with SQL Developer connectivity to our databases from a remote employee's laptop.
The database is hosted inside our firewall and when the employee tries to connect to the database he receives the following error:
+"Error Encountered: An error was encountered performing the requested operation: The network adaptor could not establish the connection. Vendor Code 20"+
I believe I may have seen the following error at one point as well...
Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
Note: He gets this error when logged into our VPN & while he can connect via SQL*Plus to that same database. He gets the error regardless if he uses the tnsnames entry option in SQL Developer or if he is using the "Basic" connection type.
What's interesting is that if he disconnects from the VPN, turns off his wireless connectivity and then hard-wires into our network he can connect, no issue.
The strangest part for me is that while he can not connect to the database via SQL Developer, he can connect via SQL*Plus. He can ping the source IP address fine, he can tnsping the database no problem, he can connect via SQL*Plus, he just can't connect via SQL*Developer. Since SQL*Plus and tnsping are working, I know he can access the db server via port 1521, so I don't think it's a port issue.
Another strange thing: When he connects to our network via an "old" VPN (open VPN) he has no issues.
His machine is Windoz 64 bit (HP laptop) and he's using the latest version of SQL Developer and a newer JVM.
Also interesting: I also have a Windoz 64 bit laptop (Lenovo) and I do not have the same issues as he does. I however am running an older version of SQL Developer and probably an older JVM.
I dug around a bit, seems like perhaps this has something to do with IPv6? No idea what to do next except have my network guy look at firewall logs to try to capture where the connectivity is being dropped.
Any thoughts or suggestions would be appreciated. I've tried all kinds of things (giving him my tnsnames.ora and sqlnet.ora file, manually editing those files, tried IP addresses instead of host names, tried host names with the .doman.org extensions, etc.).
Again, any suggestions would be appreciated and thank you very much.
Rich
Edited by: rmurnane on Oct 23, 2012 10:58 AM

Since SQLPlus is installed and works fine you could try to set
Tools -> Preferences -> Database -> Advanced -> Use OCI/Thick driverThis should enable SQLDeveloper to use the same oracle client SQLPlus is using to connect to the database.
Mind that by setting this option you need to have an 11g client (or instant client) installed that matches the ojdbc6.jar version used by SQLDeveloper, so if you are using an older client this may not be a usable solution.

USB port issues when using iphone5

Similar Messages

Maybe you are looking for