USB port....need to replace the motherboard or whatever holds the USB in place

the USB port on the lower R side of my hp pavillion dv1000 notebook pc....when I try to plug something into the USB port, the port goes in. I need to replace the USB port. I don't know if it can be fixed or if I have to replace a motherboard or sisterboard or whatever the USB port is connected to. Any ideas or advice and how hard is it to fix it. I don't want to get rid of the laptop because it still works great. I can burn and play cds and dvds on it. I can use the WIFI to access my email. Other than the USB port connection needing repair...it runs great. Please advise or help. Since it's out of warrantee since 2007(purchased in 2004) hp will not give me any support or tell me what part I need to replace etc... And it would cost more to send it out to fix....around 400 or 500. So I want to get the part and have my friend put it in. Please advise/help.
Angie

Post your full model number and I will see if it is a replaceable part.
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&lc=en&dlc=en&cc=us&docname=bph0...

Similar Messages

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

Try leaving it plugged in and then restart the computer.
If you are on Windows this link may help but it is a bit old.
http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

I have 2010 macbook white 13 inch and need a replacement battery - where can i find the specs needed for the replacement?

I have 2010 macbook white 13 inch and need a replacement battery - where can i find the specs needed for the replacement?

The model 6,1 Late 2009 and the model 7,1 Mid 2010 use an A1331 battery. You can replace it yourself or have Apple do it for you for $129. If you need it quickly make sure you order it from a U. S. seller. Orders from China can take two or three weeks.
http://www.ebay.com/sch/i.html?_nkw=macbook++battery+a1331&_sacat=0&_odkw=macboo k++battery+a1342&_sop=12&_osacat=0
Here's installation instructions. You'll need a Tri Wing Y1 screwdriver in addition to the usual #00 Phillips screwdriver.
http://www.ifixit.com/Guide/Installing-MacBook-Unibody-Model-A1342-Battery/1667/ 1

Need to replace black back glass cover with the original one and i couldn't find it on Amazon., Need to replace black back glass cover with the original one and i couldn't find it on Amazon.please help

Need to replace black back glass cover with the original one and i couldn't find it on Amazon., Need to replace black back glass cover with the original one and i couldn't find it on Amazon.Please help

Apple does not sell parts. There are no legitimate sources for iPhone parts. Take it to your local Apple Store.

Both my USB ports are suddenly dead... has anyone had the same prob? what can I do?, both my USB ports are suddenly dead... has anyone had the same prob? what can I do?, both my USB ports are suddenly dead... has anyone had the same prob? what can I do?

both my USB ports are suddenly dead... has anyone had the same prob? what can I do?, both my USB ports are suddenly dead... has anyone had the same prob? what can I do?, both my USB ports are suddenly dead... has anyone had the same prob? what can I do?

Reset your computer's SMC:
http://support.apple.com/kb/HT3964
May I ask what purpose you think it serves to repeat your message six times? Once is quite enough.

My iPod Touch 4th Generation 8gb won't turn on and is frozen on the loading symbol/wheel, I tried the method where you hold the home and lock button lots of times and it hasn't worked! What do I do?

My question won't all fit in but it says 'My iPod Touch 4th Generation 8gb won't turn on and is frozen on the loading symbol/wheel. What do I do?'
I've had this problem from about two weeks and I forgot about it, but today I wanted to play on it and remembered that it's not working, I've tried connecting it to iTunes via my laptop but I'm not to sure how to update it because I thought that might fix it, but no luck. I've tried the trick where you hold the lock and home button but nothing happened apart from it just went back to the apple logo and then to the frozen loading symbol/wheel. I need help!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I tried to fix my broken screen on my ipad 4 but now I've broken the retaining clip that holds the LCD ribbon in place nothing happens when switched on can apple store represent this even with the digitizer not stuck down yet ? cheers

I tried to replace the screen on my ipad 4 but now I have broken the retaining clip that holds the LCD ribbon in place. Do you if apple store would repair this even though I have not stuck the screen back on

Any warranty you had would have been voided by you trying to repair the iPad yourself but Apple will repair/replace your device for a fee:
https://www.apple.com/support/ipad/repair/other/
In your case $299
Set up an appointment with a Genius Bar and they'll go over your options.

SDO gives JBO-26030: Failed to lock the record, another user holds the lock

Hi,
I have a question thats on the boundary between ADF and BPEL but I posted in this forum because its highly related to ADF Model with Service Interface.
We have a BPEL batch process that spawns multiple child BPEL processes that handle threads inside the batch in parallel. These child processes all update the same batch record in a database with for example the lastActionDateTime. We do this by invoking an update service on a SDO application that we built following this tutorial: http://jianmingli.com/wp/?p=2838
It all works good but sometimes when updating the same row from multiple BPEL process instances at the same time, we sometimes get a SDO JBO-26030: Failed to lock the record, another user holds the lock.
I'm a bit stunned by this, because all we really do is updating a record. From BPEL we just invoke the updateBatch webservice method of the Service Interface.
I can imagine that there will be wait time when these updates come in at the same time, but I didn't expect an exception would occur. Also the arbitrariness confuses me. If a child process would lock the record, I would expect this error to happen always and not at random.
From BPEL the error displays as follows:
     <fault>
          <bpelFault>
               <faultType>1</faultType>
               <ServiceException>
                    <part name="ServiceErrorMessage">
                         <tns:ServiceErrorMessage>
                              <tns:code>26030</tns:code>
                              <tns:message>JBO-26030: Failed to lock the record, another user holds the lock.</tns:message>
                              <tns:severity>SEVERITY_ERROR</tns:severity>
                              <tns:exceptionClassName>oracle.jbo.AlreadyLockedException</tns:exceptionClassName>
                         </tns:ServiceErrorMessage>
                    </part>
               </ServiceException>
          </bpelFault>
     </fault>However when I dive into soa_server1-diagnostic.log I see the following exception:
[2011-10-28T17:37:37.770+02:00] [soa_server1] [ERROR] [] [oracle.jbo.server.svc.ServiceJTATxnHandlerImpl] [tid: [ACTIVE].ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: a1484c49db38e963:-581f01fc:13345d7173d:-8000-00000000000322f4,0:1:0x5f5e2bf:33] [WEBSERVICE_PORT.name: ECMControllerSDOServiceSoapHttpPort] [APP: ECMControllerSDO] [composite_name: ECMProcessController] [component_name: ProcessControllerBPEL] [component_instance_id: 240335] [J2EE_MODULE.name: ECMControllerSDO] [WEBSERVICE.name: ECMControllerSDOService] [J2EE_APP.name: ECMControllerSDO] [[
oracle.jbo.RowInconsistentException: JBO-25014: Another user has changed the row with primary key oracle.jbo.Key[CDS_20111028_8 ].
     at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:1077)
     at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:553)
     at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:8134)
     at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:5863)
     at oracle.jbo.server.EntityImpl.beforePost(EntityImpl.java:6369)
     at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6551)
     at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3275)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3078)
     at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2088)
     at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2369)
     at oracle.jbo.server.DefaultJTATxnHandlerImpl.commit(DefaultJTATxnHandlerImpl.java:156)
     at oracle.jbo.server.svc.ServiceJTATxnHandlerImpl.commit(ServiceJTATxnHandlerImpl.java:216)
     at oracle.jbo.server.svc.ServiceJTATxnHandlerImpl.beforeCompletion(ServiceJTATxnHandlerImpl.java:124)
     at sun.reflect.GeneratedMethodAccessor2677.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.jbo.server.svc.WLSContextCrossAppProxy$WLSCrossAppProxy.invoke(WLSContextCrossAppProxy.java:66)
     at $Proxy377.beforeCompletion(Unknown Source)
     at weblogic.transaction.internal.ServerSCInfo.doBeforeCompletion(ServerSCInfo.java:1239)
     at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:1214)
     at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:116)
     at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1316)
     at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:2132)
     at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:272)
     at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
     at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:625)
     at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:49)
     at weblogic.ejb.container.internal.BaseRemoteObject.__WL_postInvokeTxRetry(BaseRemoteObject.java:444)
     at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:53)
     at nl.kpn.ecm4crm.am.server.serviceinterface.ECMControllerSDOServiceImpl_51vl7y_ECMControllerSDOServiceImpl.updateBatches(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
     at $Proxy373.updateBatches(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.j2ee.ws.server.jaxws.ServiceEndpointRuntime.processMessage(ServiceEndpointRuntime.java:355)
     at oracle.j2ee.ws.server.jaxws.ServiceEndpointRuntime.processMessage(ServiceEndpointRuntime.java:196)
     at oracle.j2ee.ws.server.jaxws.JAXWSRuntimeDelegate.processMessage(JAXWSRuntimeDelegate.java:479)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1187)
     at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:1081)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:581)
     at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:232)
     at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:192)
     at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:459)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.jbo.server.svc.ServiceContextFilter.doFilter(ServiceContextFilter.java:78)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)Thank you for reading, any directions suggestions on how to solve this will be highly appreciated.
regards,
Gerben

Thanks Frank.
Already tried that , please let me know if there is any other way to get this .
This is being discussed here :
Re: Update without No wait
and i am following what John Stegeman has suggested.

My iPad no longer switches screen when i go from holding it horizontal to vertical. How can I change it back in settings to have the screen look the way I am holding the iPad

My screen no longer moves with the way I'm holding the iPad. For example if I'm holding it horizontal the screen is vertical. Up unitl now the screen has always moved with the way I was holding the ipad. Is there something in Settings I can do to get this back?

If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left. (IOS 6). For iOS 7, swipe up from the bottom to get to the control center and look for the lock icon in the top row on the right.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button

JBO-26030: Failed to lock the record, another user holds the lock.

Hi, i am using value change listener to a discount percentage field & after calucalion for the first time it will give the discount amount value & filling that field. But for the second attempt it is showing nothing but printing correct values in the console.it is not getting refresh.
and also i am getting this error:JBO-26030: Failed to lock the record, another user holds the lock.

based on Jdev documentation, re-execute the query solved the problem.

I have read all of the discussions about headset echos, my echos are heard by the caller when i hold the phone by the bottom half. The echo disappears when I change my hold position. Anybody else having this problem? Fix?

I have read all of the discussions about headset echos, my echos are heard by the caller when I hold the phone by the bottom half. The echo disappears when I change my hold position. Anybody else having this problem? Fix?

Don't hold it like that. You're creating an 'echo chamber' due to the position of your hand/neck/face. It's not a technical issue. I hear this when I talk to my wife and she cradles the phone against her shoulder.

I have a white screen and i tried rebooting the ipod touch by holding the home and sleep button simoltaneously but it still jus tappears white. i also attempted to connect my ipod to itunes but my itunes wont even recognize my ipod touch 4g

i have a white screen and i tried rebooting the ipod touch by holding the home and sleep button simoltaneously but it still jus tappears white. i also attempted to connect my ipod to itunes but my itunes wont even recognize my ipod touch 4g. What should I do now?

Just let the battery drain until the screen shuts off. When you charge it back up it should boot up normally.

HT1379 The USB ports on my 30" Cinema are not working. The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks. I need to move the computer between two locations, and the other monitor is a 27"

The USB ports on my 30" Cinema HD display appear to not work. The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display. Now I need to move the computer back and forth between two locations using the two displays. The need for operating USB ports is essential. Any ideas. The display appears entirely normal. Am running OS X 10.9.

Disregard, problem solved.

HP Pro Book Laptop - Damaged USB ports need replacement

Both USB ports are damaged. One is not working at al and the second one shows signs of failing also.
One local repair shop said these ports are not worthwhile to repair because of the cost. This has never happened before on the dozen computers I have owned in the past. This is my first experience with an HP computer.
Please advise

Laptop USB ports are not user replaceable. If the repair shop says it is not worth it, then either the laptop is real old or they do not want the work. Model number please.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Damaged USB Ports - Need solution

Hello,
I am having a problem with my Macbook Pro 13-inches Early 2011 OS X Version 10.7.5 Processor 2.3 CHz Intel Core i5 Memory 4 GB 1333 MHz DDR3 Startup Sisk Macintosh HD
Since about a year I noticed that one of my two USB ports stopped functioning as when Iwould plug some device through it (i.e. flash memory card, external har disk, or whatever it may be,) there was no reaction on the mac. A few months back the same problem developed with the other USB port. I especially noticed this when iTunes would suddenly appear to not identify my iPhone. However, I noticed that if I press hard on the USB cable head and keep pressing, the computer was able to read the device.
I do not know what could have been the cuse of this damage. I was told that it was due to my personal usage. I took my macbook to a mac specialist workshop and it was figured that the only solution would be to replace the USB ports with new ones while maintaining the same motherboard. However, I refused to continue when I saw the quotation (300 euros) for the job. It seams too much to pay for a macbook tht's rather a bit old.
My daily work requires that I tranfer fils back and forth to USB cards for printing, as well as archive and backup files on external hard disks. Any ideas or solutions that could get this type of job done would be highly appreciated.
Thanks in advance
Fawaz

You could use something like this:
http://www.amazon.com/Belkin-Thunderbolt-Transfer-Compatible-Technology/dp/B00D6 BYDGC/ref=sr_1_10?ie=UTF8&qid=1396013534&sr=8-10&keywords=thunderbolt+to+usb+cab le

USB port....need to replace the motherboard or whatever holds the USB in place

Similar Messages

Maybe you are looking for