USB ports and jump drives
when i insert a jump drive into the usb port, the message i get is unable to install drivers. these drives work on another computer, however that one is running XP. what do i do
which laptop? which windows?
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.
Similar Messages
-
USB ports and Pocket Drive Unrecognized (IQ-775)
Hi all:
With no warning, the two front USB ports stopped functioning (rear ones are OK) and the Pocket Drive is no longer recognized. Worked one day, did not work the next. This happened simultaneously, so I assume it is related as the Pocket Drive is a USB device.
There is power to all of these ports, as when I plug something into them, or insert the pocket drive, the power lights come on, but the system does not show them. The pocket drive no longer shows on the folder tree, and if I remove it and connect it to a working USB port, it reports 'unknown device', tries to load a driver and fails. The Windows message says, "if this continues to occur, replace device" Easy for them to say!! I have used the Disk Manager, but it too cannot find the pocket drive anymore. Interestingly, the Pocket Drive works fine on other computers as a portable drive and is recognized as "HP Pocket Drive", so there is noting wrong with the device.
The pocket drive has disappeared from the Device Manager, and all of the USB ports show are 'working properly', but of course we don't know which are which or even if the front ports are listed as they are not identified
If anyone knows how to repair this problem or has had similar, I would be grateful. My IQ-775 is out of warranty so the repair is on me. I don't know how USB ports 'fail', but I am sure it is a 'fixable' problem.
The machine is steadily destroying itself, just sitting on the desktop. The WLAN adapter went first (on both of my HP machines), then the display drivers, then the Lightscribe, now the USB ports. Planned obsolescence at its finest!
Thanks
DNCooper, it's NOT going to be all the devices that are having problems, the OP's issues are related to the USB hub/ports not working properly. Reinstalling drivers for all the USB devices including the Pocket drive that doesn't use any, would be an exercise in futility.
OP, try removing the USB root hubs in question in Device manager and letting the OS put them back on a reboot, that has been known to resolve issues like this, you can also go into the BIOS and do a "reset to default" I know that sounds strange, but it can resolve weird USB issues too. -
I have new HD 750GB Hybrid in 2008 Macbook Pro 17" w/ Snow Leopard 10.6.8 connected to old Hard drive(250GB that had 10.5.8 on it at time of failure) via SATA cable to USB port with external power source.. Computer not acknowledging old HD at all in Disk Utility or otherwise (that I'm aware of)..Do I need to partition New HD and load old(10.5.8) onto partition to recognize older drive for data recovery? Thanks Wayno08
You do not need to load 10.5.8 onto your new drive in order for a 10.6.8 system to see the contents of a 10.5.8 system.
You might want to check out the hard drive troubleshooting bootk in the downloads section of this web site:
http://scsc-online.com
They also sell a product named Phoenix that can do OS extraction and volume copying/cloning, but to be honest I don't know if it's appropriate in this case.
I would suggest the following:
Open up Terminal.app (under utilities) and type "diskutil list" without the quotes. This is the command line version of Disk Utility. If the external drive doesn't show up at all, then it's likely not connected properly, not getting power, or just plain dead. If it shows up with only a devce name like disk0s16 but no volume it means the drive is seen, the OS just can't make sense of it.
Assuming the drive shows up, I would try to boot off the original installl disks for the system and run Disk Utility from that. I'm assuming the drive will show up. You'll want to select the option to repair the drive and then perform the option to repair the permissions.
If the unit isn't showing up, as per step 1, try a different USB port. More importantly with your unit, try it on another side of the unit if possible. If you read the book I referenced above, some of those units have I/O boards that are separated from the logic board. If the cable from the logic board to the I/O card goes bad or has problems, which isn't all that uncommon, some or all of the ports on the I/O card may appear to be bad as well. If you use a USB port on another side, it would be routing out of a completely different I/O path, so that's a potential problem.
If the drive is only seen with a device name such as disk0s16, it's likely either the index files are corrupt beyond Disk Utility's ability to see them. The only thing that I think would help would be a product named DIsk Warrior, but I can't guarantee that.
Disk Warrior can be found at:
http://www.alsoft.com/diskwarrior/
The company that I linked in the first link above also makes a product named Scannerz that does HD and system testing. The Scannerz/Disk Warrior combination make a good pair because the complement each other....Scannerz does what Disk Warriror can't and Disk Warrior does what Scannerz can't. However, at this point I'm not too sure getting a tool like Scannerz would be of much use because it sounds like the damage has already been done.
Let us know what happens. -
If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?
No, and that shouldn't be done with an AirPort Extreme or Time Capsule.
(66017) -
T60 HDD res. partition, USB ports and DVD-RAM drive no longer recognizing data/media!
I have a base installation of the IBM T60.. I made no modifications to the setup or configuration of how the HDD is structured nor have I downloaded and installed any strange drivers... only automatically downloaded drivers from Microsoft update and manually downloaded driver updates from the Lenovo website.
One day everything was working fine. Next day, my USB devices, reserved partition (can't remember what this is called) and the DVD-RAM drive stopped working but power was still getting to these devices.
My DVD-RAM drive is seen as a DVD-RAM on first bootup. When I insert a CD or DVD media in the drive, the Explorer tree changes DVD-RAM to CD-ROM in the Explorer (really strange). It behaves like there is no media in the drive. Cannot boot with that drive either.
In addition, I have external USB HDD and Flash drives as well. None of them work on this T60 anymore.
When I plug in an external USB HDD or Flash drive, I get "not formatted" error message and a prompt to format my drives?!
I tested these USB external drives on a desktop machine and verified that they are working 100% fine. So the problem has something to do with my IBM/Lenovo T60.
It almost seems like something broke on the motherboard perhaps? I downloaded and installed the latest BIOS updates as well to no avail. Please help. Thanks in advance for your time and consideration of this issue.
Message Edited by bodmaster on 07-18-2008 09:51 PM
Message Edited by bodmaster on 07-18-2008 09:52 PM
Message Edited by bodmaster on 07-18-2008 09:52 PMAnyone have any ideas? *praying*
-
I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working
I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
usbccgp Microsoft USB Generic Parent Driver c:\windows\system32\drivers\usbccgp.sys Kernel Driver No Manual Stopped OK Normal No No
usbcir eHome Infrared Receiver (USBCIR) c:\windows\system32\drivers\usbcir.sys Kernel Driver No Manual Stopped OK Normal No No
usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver c:\windows\system32\drivers\usbehci.sys Kernel Driver No Manual Stopped OK Normal No No
usbfilter AMD USB Filter Driver c:\windows\system32\drivers\usbfilter.sys Kernel Driver No Manual Stopped OK Normal No No
usbfltr Razer Copperhead Driver c:\windows\system32\drivers\copperhd.sys Kernel Driver No Manual Stopped OK Ignore No No
usbhub Microsoft USB Standard Hub Driver c:\windows\system32\drivers\usbhub.sys Kernel Driver No Manual Stopped OK Normal No No
usbohci Microsoft USB Open Host Controller Miniport Driver c:\windows\system32\drivers\usbohci.sys Kernel Driver No Manual Stopped OK Normal No No
usbprint Microsoft USB PRINTER Class c:\windows\system32\drivers\usbprint.sys Kernel Driver No Manual Stopped OK Normal No No
usbstor USB Mass Storage Driver c:\windows\system32\drivers\usbstor.sys Kernel Driver No Manual Stopped OK Normal No No
usbuhci Microsoft USB Universal Host Controller Miniport Driver c:\windows\system32\drivers\usbuhci.sys Kernel Driver No Manual Stopped OK Normal No No
uwbusb UWB Bus Control USB-Miniport Driver c:\windows\system32\drivers\usbuwbmini.sys Kernel Driver No Manual Stopped OK Normal No NoDid you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.
-
Please help. I'm still a MAC rookie.
I unplugged my Pedometer from one of the USB ports on my Macbook Pro. Ever since then, I lost the backlight to my keyboard. I did some troubleshooting on these discussion boards and found a few with similar issues, but most of the discussions were old and the solutions were out of date. As one of them advised, I checked to see if my Isight Camera was still connected and it wasn't. I also tried plugging a few different things into both USB ports and neither of them worked either. So whatever caused this, it's affecting all 3 of these things. I don't know if my Pedometer is old/bad and it "short-circuited" the USB port and everything else along with it when I unplugged it or if something coincidentally went bad at the same time that I removed it.
I read some old answers from the discussion boards where they suggested a Command (R) system recovery reboot. But I also read that that really doesn't help on newer operating systems. I am on OS X. Here is my Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,4
Processor Name: Intel Core 2 Duo
Processor Speed: 2.53 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
I did recently purchase a backup drive and I THINK I previously backed everything up properly. But, I can't even plug that into the USB port now to see if I
can somehow use that to fix this since the ports aren't working. I have no idea what to do. Does anyone have any suggestions? Please!?
Thanks in advance!Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
The iTune cannot detect my iPhone 4S. I have already tried all methods suggested, including re-installling iTune, re-activating Apple Mobile Device, plugging in various USB ports, and etc. I use windows 7. How can I solve this?
The new cable is completely new, and my computer can detect the phone as a drive, and battery charging is ok. So I believe the USB cable works properly. It is so weird that just iTune itself cannot detect the phone, and it is of the most updated version. What else can I do? Thanks.
-
USB ports and memory card slots not working
My Pavilion a6120n desktop has worked brilliantly ever since I purchased it. As of last week the 2 usb ports in the front and the 2 unused usb ports in the back have stopped working. My printer is plugged into one rear port and my wireless mouse is plugged into a second rear port and these work fine. I generally use a memory stick for data swapping or the card reader slots (which have also stopped working). I no longer see the memory card icons in the "Computer" window. When installing something new the "New Hardware Found" statement pops up but the driver install always fails. I think it is a software issue but there are no usb drivers to download on the HP/support site that I can find. . . so . . . Below is what I have tried so far.Run antivirus software. Full scan & memory scan - no issuesRun malewarebytes full scan - no issues I have tried restarting several times with no success. Restore to several previous restore points = failedRestarting computer in repair mode = failedRun the repair disk that I had made = failedChecked the power management for each usb port to see if the power was routed properly = okRemoved the case cover and carefully inspected the wiring and connectors.finally I tried uninstalling the usb drivers = failed Upon restarting the computer the last time the startup file must have failed and after several hours of attempting a repair I had to reinstall the Window 7 completely. Still no usb or memory card function. Any help would be appreciated Thanks,MrBob38
Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how the USB ports and memory card slots are not working, and I would be happy to assist you in this matter! Since you mentioned that you have already re-installed Windows 7 on your computer, and the USB ports still do not work, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.
www.hp.com/contacthp/
I hope this helps!
Regards -
USB ports and sound have stopped working
As the subject reads, all 3 of my USB ports have stopped working and all sound. In the device manager I receive a (code 10) for realtek high definition audio. I have done everything I can think of at this point, I have even done a complete OS reinstall. Afterwards I have also updated with every possible driver file I can find from realtek and toshiba, I really don't know what else to do at this point, any thoughts? advice? anybody else with this problem?
Windows 7
Toshiba Satellite
L505D-S5983Same here. I have an L505D that is doing the same exact thing. No sound device, all USB ports not working and the SD card reader not working either. Also when you close the lid and reopen it, the machine won't wake up. Have to restart to get it to come back. Haven't found ANYTHING in forums to help.
Sound devices, USB ports and SD card doesn't show up in the Device Manager.
Took the laptop to a local fixer-upper. Unhooked the charger, took battery out, put battery back in, then restarted the laptop without being hooked up to the charger and everything came back on. But only for a short while. After a couple of days, it does its thing all over again.
Are we looking at a mother board issue here? SURELY someone out there in cyber space has a solution. -
USB Ports and AGP Video Card on same IRQ
I've got a tough one. I have 6 USB ports. Call them 1,2,3,4,5,6. Ports 1 and 2 work fine with my new USB 2.0 80GB External Harddrive. This pair of ports 1 and 2 are direct into motherboard.
However system crashes when I plug USB 2.0 External Drive into ports 3,4,5,6. These are Dports with cables that plug into the MB. One of these Dports has the four error lights which are all green. Western Digital has cautioned against sharing this drive with other IRQs. Says that the video card and the WD harddrive require dedicated IRQs...but I have no control of how W XP assigns them.
Ports #3-6 work fine with mouse, scanner, and printer etc. However they fail when trying to use WD External Hardrive.
I also checked IRQ settings and IRQ 16 is used for a USB Port and for my MSI AGP video card. I believe this conflict is the cause of the problem.
So help..how do I fix this dilemma?
I have Windows XP and see no way to change IRQs.
BIOS does not even show IRQ as a choice..only 1-15. Also BIOS is latests version for my MSI 845G Max L MS-6580 mother Board. USB drivers are all Intel. Video Card Is MSI AGP MS-8878 G4Ti/MX 420 w TV out. Bios and Drivers are current.
How can I run the USB 2.0 External Harddrive in Ports 3-6?I did load new Intel INF Drivers and AGP drivers yesterday.
No luck USB Ports 3-6 still fail with External Hard Drive.
I'm not clear on how to turn back on AICP or ACIP. BIOS?
Also not IRQs 16-23 are listed with active devices on the Device Manager
16 has a USB Controller at 24c2
16 also has AGP video card
17 has Audio '97
17 also has Fast Eternet.
18 has USB Controller at 24c7
19 has USB Controller at 24c4
23 has PCI to USB Interface.
Port 3-6 do work fine with mouse, dig cam, Scanner, printer. These ports only fail with External Harddrive plugged in. Ports 1and2 work fine with external HD??
So question is how do I check on the IRQ ports using AIPC or APIC...or whatever the name is...thanks folks. -
K450 USB Ports and Card Readers not working
When I plug in devices to my K450 ideacentre desktop USB ports, they are not recognized. The same for a couple of memory cards I have tried in the card reader. These are all working fine when put in other computers. The card reader and USB ports do work when I insert a multi card reader into the USB port or a multi USB port into the USB port (and then use either of those to read the same external hard drive or memory cards that don't show up when installed directly). Any idea what this could be? I'm sure it's something simple that I'm missing but I can't figure it out. I'm running Windows 8. Thanks for any help!
I wanted to add to this...I did plug in a CF card the other day and that was recognized. I then tried my external hard drive directly again in a front USB port and it worked for a while (an hour or so). Then it suddenly was not there anymore as if I'd ejected it even though I didn't. Tried to put it back in and nothing. This tells me it may be a hardware problem since it "recognized" it for a bit. It's very frustrating.
-
Pavilion dv6 2190us esata/usb port and Dual HDD Dock
When I connect a dual HDD dock (BlacX Duet) to the esata/usb port only one drive is recognized. Can this esata/usb port support dual sata drives? How do I make it work?
Windows 7 64-bit
Core i7 Q 720 1.6GhzI have the exact same question with my DV6T I bought Nov 2009. Did you ever get an answer? I want to buy a dock that supports 2 sata drives and connects via 1 eSata cable to the laptop. But before investing need to know if the eSata port is multi port aware as the docks require the laptop chipset be able to support. I emailed HP help desk without success so far. Any info is appreciated...thanks.
-
I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.
As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv -
Hi guys well huge issue my Ipod 4th generation shuffle died and I tried to chrge it I plugged it into the USB port and the red light came on and after 5seconds turned off the whole Ipod is dead and I've tried in wall chargers as well that doesn't charge what should I do is there a solution or should I claim my warrenty and have it fixed??
Also my Itunes and computer won'r reconize it
Maybe you are looking for
-
Can I upgrade to Lion given that I currently run Snow Leopard on an external drive?
I run Snow Leopard on an external HD. If I upgrade to Lion will it install and run there successfully? My internal HD is dead.
-
Updating my podcast to new location, iTunes not recognizing new feed(48hrs)
Hi Podcasters, I've been googling and reading about this the past few hours but I'm still at a loss. On Monday I moved my podcast - Pod Stories: Tales for everyone, which has been on iTunes since May 2007, to a new location. It's is the first time I'
-
Question in Flat file GTC Recon
HI, I wanted to know how Reconciliation works in GTC with respect to Reconciliation Key. My requirement is ,i have a flat file with attributes firstname,lastname,empno and i would like to reconcile users from this file into OIM. OIM UserID will be ge
-
I'm trying to -re-install itunes, and my system says it can't find the itunes.msi file to finish the installation process. I've re-installed it before and no issues. Some article I read said that issues have arrisen when files were continually update
-
29 update ruined my firefox customizated experience
I'm a loyal firefox user ever since version 3. Now I'm just considering taking my loyalty elsewhere. Another dumb update discarding users, and I'm getting tired of this. Classic Theme Restorer Add-on instead of helping made it even worse! Never had t