USB ports and sound have stopped working

As the subject reads, all 3 of my USB ports have stopped working and all sound. In the device manager I receive a (code 10) for realtek high definition audio. I have done everything I can think of at this point, I have even done a complete OS reinstall. Afterwards I have also updated with every possible driver file I can find from realtek and toshiba, I really don't know what else to do at this point, any thoughts? advice? anybody else with this problem?
Windows 7
Toshiba Satellite
L505D-S5983

Same here. I have an L505D that is doing the same exact thing. No sound device, all USB ports not working and the SD card reader not working either. Also when you close the lid and reopen it, the machine won't wake up. Have to restart to get it to come back. Haven't found ANYTHING in forums to help.
Sound devices, USB ports and SD card doesn't show up in the Device Manager.
Took the laptop to a local fixer-upper. Unhooked the charger, took battery out, put battery back in, then restarted the laptop without being hooked up to the charger and everything came back on. But only for a short while. After a couple of days, it does its thing all over again.
Are we looking at a mother board issue here? SURELY someone out there in cyber space has a solution.

Similar Messages

I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working

I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
usbccgp            Microsoft USB Generic Parent Driver   c:\windows\system32\drivers\usbccgp.sys         Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbcir   eHome Infrared Receiver (USBCIR)    c:\windows\system32\drivers\usbcir.sys Kernel Driver   No       Manual            Stopped           OK      Normal No       No
usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver c:\windows\system32\drivers\usbehci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
usbfilter            AMD USB Filter Driver           c:\windows\system32\drivers\usbfilter.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbfltr   Razer Copperhead Driver         c:\windows\system32\drivers\copperhd.sys       Kernel Driver   No       Manual            Stopped           OK      Ignore No       No
usbhub Microsoft USB Standard Hub Driver    c:\windows\system32\drivers\usbhub.sys           Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbohci Microsoft USB Open Host Controller Miniport Driver c:\windows\system32\drivers\usbohci.sys          Kernel Driver   No       Manual Stopped           OK      Normal No       No
usbprint            Microsoft USB PRINTER Class           c:\windows\system32\drivers\usbprint.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbstor USB Mass Storage Driver        c:\windows\system32\drivers\usbstor.sys           Kernel Driver   No       Manual            Stopped           OK      Normal No       No
usbuhci Microsoft USB Universal Host Controller Miniport Driver         c:\windows\system32\drivers\usbuhci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
uwbusb            UWB Bus Control USB-Miniport Driver          c:\windows\system32\drivers\usbuwbmini.sys    Kernel Driver   No       Manual Stopped           OK      Normal No       No

Did you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.

USB ports and inbuilt webcam stopped working

I updated to 8.1 a few months ago and everythings been fine until now, I haven't downloaded anything at all lately
except borderlands 2 from steam which i was playing w/ a wireless USB mouse, until my laptop gave me a low battery warning so i closed it without turning it off and put it to a side.
Later I put the laptop on charge and opened it w/ my ipod charger and USB mouse attached and the ports just weren't
working.
I booted the laptop into diagnostic mode and the ports worked, i could use the mouse and my iPod was charging. I
ran tests on all 3 ports to and all 3 passed, but when i boot the pc into normal mode they don't work at all, so I'm thinking that it's a problem w/ the software & not the ports/camera themselves.
I've tried:
Turning off the USB selective suspend setting
Uninstalling the USB ports in device manager and rebooting (camera isnt showing up in dev mgr at all)
Updating/re-installing the drivers (from both HP and Intel websites)
Doing a system restore
There is a section in device manager called Other Devices containing "Unknown Device" and "Unknown USB Device (Configuration descriptor request failed)" (both w/ yellow exclamation points)
My laptop is a HP 250 G1 Notebook PC

Hi,
Meanwhile, please reinstall the usb controller and check the result:
First, please disconnect all USB devices and then perform the following steps:
a) In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
b) Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer.
Please also make sure you update to latest BIOS, you can refer to the user manual or the manufacture website since this operation might contain some risks.
Yolanda Zhu
TechNet Community Support

USB ports and SD reader not working

For a few days my usb ports and SD reader stop working, I tried, Doing a SMC Reset and a PRAM reset I also reinstall my operating system but non of then have worked any advice would be greatly appreciated.

iMac 21.5-inch, Mid 2011(OX 10.8.5).
I call the repair shop and they told me it would coast $2000 to get it fix, they told me that my mother board was burn, so I send them an email telling them if my mother board was burn wouldnt be able to use my imac. I could get a new one for that price.

My sounds have stopped working for text, YouTube and music

My sounds have stopped working for text, YouTube and music since in downloaded new software!

I'm not sure if this will help, but I went into my sounds setting and made sure that both the "vibrate on ring" and "vibrate on silent" were selected to "on." Once I did this, I was able to get the vibrating notification for a call received (as this had previously not been the case). Hope this helps.

I downloaded a new version of Itunes on my PC now some songs and videos have stopped working as well as ringtones have disappeared.

I downloaded a new version of Itunes on my PC now some songs and videos have stopped working as well as ringtones have disappeared.

I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

alisportshots wrote:
I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup. I re-tried to do an icloud backup and it again told me that "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup: never". Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
For your iCloud backup, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer. You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup. Then try again.

Keyboard and trackpad have stopped working

Hi there
My girlfriend and I have 3 yr old MBP's and her keyboard and trackpad have stopped working. She can plug in an external USB mouse and it moves around, but she can't type her password into the log in. hence she's stuck.
We have tried powering down and up 3 times, even taken out the battery.
Can anyone suggest help?
Thanks Rob

She needs a new top case. On older systems, the keyboard, trackpad, and even power button are all controlled via a single cable. Odds are, if you wait long enough, the power button will stop working too.
I'd estimate the repair cost at probably around $250-$300, so she might just want to be looking for a new laptop. You can also hit ebay and craigslist to see what you can find, just be careful with the screws for the top case. You get the wrong screw in a couple of the holes, they will never come back out until you break something.

FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. Can u please help???

FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. The message says "FaceTime (iMessage) Activation: Could not sign in. Please check your network connection and try again". My network is perfectly alright as I keep buying on the App Store. can u please help out???

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Links in PDF's and Excel have stopped working

I'm using a fresh install of Firefox 14.0.1. Links in PDF's and Excel have stopped working (the reinstall was part of the problem solving). FF is my default browser.

Starting in Firefox 14, Firefox no longer creates registry settings for launching links using "DDE". This has been reported to create two different problems:
* "Firefox is already running" or "Firefox is not responding" error when following links in email messages in Thunderbird ([https://support.mozilla.org/en-US/questions/932461 Can't open links in Firefox by clicking URL in Thunderbird])
* New instance of Firefox launches if the existing instance is running in Sandboxie ([https://support.mozilla.org/en-US/questions/933798 Firefox is running. I click on a link, say in an email, it tries to start another instance of the browswer instead of just opening a new tab as it did before.])
Not sure whether your "silent fail" scenario is related.
It is possible to configure Firefox 14 to use DDE by inserting some settings into the registry. I haven't researched this carefully myself, but there was some information about it on and external site linked in the Sandboxie thread.

Lift and Extract have stopped working in Premiere Pro CS6.0.1

Lift and extract have stopped working in a sequence in Premiere Pro 6.0.1. If a create a new sequence it works ok. It seems the sequence has got locked up it some way. Does anyone have any ideas.

Thanks this worked but I found how to make it fail. I created a sequence with 3 stereo tracks and a 5.1 master. I then added a 5.1 audio track and deleted the stereo tracks. From then on the lift and extract fails.
I couldn't find a way to submit a bug to adobe. Please can someone tell mehow to do this.

Filters, styles and effects have stopped working in Photoshop Elements11

Filters, styles and effects have stopped working in Photoshop Elements11, what do I do?

Operating system and version? Have you installed anything new lately in PSE or done any OS updates?

TS1702 Both Pages and Numbers have stopped working. seem fine.

Both Pages and Numbers have stopped working. All my other apps seem fine. I can open the initial screen for both apps with the gray background but nothing else functions. I regularly update and sync the iPad and the linked pc.

Before you take the drastic step of restoring your ipad as gire.prasad suggested, it may be that the apps have not fully downloaded to the iPad. First check that the icons on the springboard don't say either "Downloading" or "Installing". If they do, then tap them again to restart the download.
If that doesn't work, go into the Appstore app and find them in the purchased tab. There may be an indicator that allows you to restart the download process there.

Since windows 8.1 usb ports and sound are acting strange

Hello,
Since I upgraded to windows 8.1 my sound randomly stutters(very anoying) and my usb ports get turned off, only the ports that have been occupied since boot, new things work, and not reinsterting the things that were present at boot, in the same or a different
port doesn't work.
Hell, why do we pay for an OS that doesn't even work?
I expect that something as simple as an USB port or sound would work just fine.
I have installed all the latest drivers but somehow windows seems to screw things up.
When I boot up debian, I have no problems at ALL. And did I pay a dime for Debian? No, it is free.
I am getting really depressed here, paying for stuff that doesn't work.
So does anyone know any other way to fix this OS than by breaking the disc and never return to it?
Thanks in advance.

To whom are you telling that, this is an end user forum.
If you have problems than contact Microsoft in your country.
http://www.microsoft.com/worldwide/
Success
Cor

K450 USB Ports and Card Readers not working

When I plug in devices to my K450 ideacentre desktop USB ports, they are not recognized. The same for a couple of memory cards I have tried in the card reader. These are all working fine when put in other computers. The card reader and USB ports do work when I insert a multi card reader into the USB port or a multi USB port into the USB port (and then use either of those to read the same external hard drive or memory cards that don't show up when installed directly). Any idea what this could be? I'm sure it's something simple that I'm missing but I can't figure it out. I'm running Windows 8. Thanks for any help!

I wanted to add to this...I did plug in a CF card the other day and that was recognized. I then tried my external hard drive directly again in a front USB port and it worked for a while (an hour or so). Then it suddenly was not there anymore as if I'd ejected it even though I didn't. Tried to put it back in and nothing. This tells me it may be a hardware problem since it "recognized" it for a bit. It's very frustrating.

USB ports and sound have stopped working

Similar Messages

Maybe you are looking for